usb: typec: qcom-pmic-typec: disable cc_debounce_dwork on stopgrafted

cc_debounce_dwork is queued from the set_cc() and start_toggling()
callbacks, which run from TCPM's kthread worker.  port_stop() returns
before tcpm_unregister_port() destroys that worker.  Flushing the worker
during unregister may therefore run a callback which queues the delayed
work after port_stop() has returned.

The delayed work can then run after devres has freed pmic_typec_port.

Use disable_delayed_work_sync() in port_stop() to cancel a pending
instance and prevent the TCPM callbacks from queueing another one.

This issue was found by an in-house static analysis tool.

Fixes: a4422ff22142 ("usb: typec: qcom: Add Qualcomm PMIC Type-C driver")
Cc: stable <stable@kernel.org>  # v6.10+
Assisted-by: Codex:gpt-5.6
Signed-off-by: Fan Wu <fanwu01@zju.edu.cn>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://patch.msgid.link/20260820135307.153773-2-fanwu01@zju.edu.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

1 files changed, 54 insertions, 0 deletions

diff --git a/Documentation/admin-guide/device-mapper/delay.rst b/Documentation/admin-guide/device-mapper/delay.rst
new file mode 100644
index 000000000..a1e673c0e
--- /dev/null
+++ b/Documentation/admin-guide/device-mapper/delay.rst
@@ -0,0 +1,54 @@
+========
+dm-delay
+========
+
+Device-Mapper's "delay" target delays reads and/or writes
+and/or flushes and optionally maps them to different devices.
+
+Arguments::
+
+    <device> <offset> <delay> [<write_device> <write_offset> <write_delay>
+			       [<flush_device> <flush_offset> <flush_delay>]]
+
+Table line has to either have 3, 6 or 9 arguments:
+
+3: apply offset and delay to read, write and flush operations on device
+
+6: apply offset and delay to device, also apply write_offset and write_delay
+   to write and flush operations on optionally different write_device with
+   optionally different sector offset
+
+9: same as 6 arguments plus define flush_offset and flush_delay explicitly
+   on/with optionally different flush_device/flush_offset.
+
+Offsets are specified in sectors.
+
+Delays are specified in milliseconds.
+
+
+Example scripts
+===============
+
+::
+	#!/bin/sh
+	#
+	# Create mapped device named "delayed" delaying read, write and flush operations for 500ms.
+	#
+	dmsetup create delayed --table  "0 `blockdev --getsz $1` delay $1 0 500"
+
+::
+	#!/bin/sh
+	#
+	# Create mapped device delaying write and flush operations for 400ms and
+	# splitting reads to device $1 but writes and flushes to different device $2
+	# to different offsets of 2048 and 4096 sectors respectively.
+	#
+	dmsetup create delayed --table "0 `blockdev --getsz $1` delay $1 2048 0 $2 4096 400"
+
+::
+	#!/bin/sh
+	#
+	# Create mapped device delaying reads for 50ms, writes for 100ms and flushes for 333ms
+	# onto the same backing device at offset 0 sectors.
+	#
+	dmsetup create delayed --table "0 `blockdev --getsz $1` delay $1 0 50 $2 0 100 $1 0 333"