x86/kprobes: Fix crash when probing CS CALL instructionsgrafted

When using eBPF to probe CS CALL instructions within a function,
a crash can be triggered.

The eBPF tool probes offset 257 of the __hrtimer_run_queues()
function:

<__hrtimer_run_queues+249>:  nopl   0x0(%rax,%rax,1)
<__hrtimer_run_queues+254>:  mov    %r14,%rdi
<__hrtimer_run_queues+257>:  cs call <__x86_indirect_thunk_r12>
<__hrtimer_run_queues+263>:  mov    %eax,%r12d
<__hrtimer_run_queues+266>:  xchg   %ax,%ax
<__hrtimer_run_queues+268>:  mov    %r13,%rdi

Which triggers this crash:

  BUG: unable to handle page fault for address: 00000000000f41c9
  #PF: supervisor write access in kernel mode
  #PF: error_code(0x0002) - not-present page
  PGD 0 P4D 0
  Oops: 0002 [#1] SMP NOPTI
  CPU: 1 PID: 0 Comm: swapper/1 Kdump: loaded Tainted: P
  RIP: 0010:__hrtimer_run_queues+0x106/0x230

Note that __hrtimer_run_queues+0x106 is __hrtimer_run_queues+262, which is
at the 6th byte of the above CS CALL instruction. Since the CS CALL
instruction occupies 6 bytes, the exception occurred in the middle of that
call instruction.

The root cause is that when using eBPF tools to probe in the middle of a
function, a kprobe with INT3 is used as the underlying implementation.

During single-step emulation of the original CALL instruction,
int3_emulate_call() assumes that the probed CALL instruction is 5 bytes
long. However, the actual CS-prefixed CALL instruction occupies 6 bytes,
so it constructs an incorrect exception return address. When the CPU
returns from the kprobe handler, the next instruction to be executed is at
the address of the last byte of that CS CALL instruction. Coincidentally,
starting from that address, the CPU fetches and decodes a completely
different instruction, which ultimately triggers a kernel crash.

Fix the issue by using the actual instruction length obtained from
the instruction decoder when constructing the exception return
address, rather than relying on the hardcoded CALL_INSN_SIZE macro.

[ mingo: Refined the changelog ]

Fixes: 6256e668b7af ("x86/kprobes: Use int3 instead of debug trap for single-step")
Suggested-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Jinke Han <jinkehan@didiglobal.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Acked-by: Yafang Shao <laoar.shao@gmail.com>
Acked-by: Borislav Petkov <bp@alien8.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://patch.msgid.link/20260908073742.GA10517@didi-ThinkCentre-M920t-N000

1 files changed, 101 insertions, 0 deletions

diff --git a/Documentation/admin-guide/cputopology.rst b/Documentation/admin-guide/cputopology.rst
new file mode 100644
index 000000000..d29cacc9b
--- /dev/null
+++ b/Documentation/admin-guide/cputopology.rst
@@ -0,0 +1,101 @@
+===========================================
+How CPU topology info is exported via sysfs
+===========================================
+
+CPU topology info is exported via sysfs. Items (attributes) are similar
+to /proc/cpuinfo output of some architectures. They reside in
+/sys/devices/system/cpu/cpuX/topology/. Please refer to the ABI file:
+Documentation/ABI/stable/sysfs-devices-system-cpu.
+
+Architecture-neutral, drivers/base/topology.c, exports these attributes.
+However the die, cluster, book, and drawer hierarchy related sysfs files will
+only be created if an architecture provides the related macros as described
+below.
+
+For an architecture to support this feature, it must define some of
+these macros in include/asm-XXX/topology.h::
+
+	#define topology_physical_package_id(cpu)
+	#define topology_die_id(cpu)
+	#define topology_cluster_id(cpu)
+	#define topology_core_id(cpu)
+	#define topology_book_id(cpu)
+	#define topology_drawer_id(cpu)
+	#define topology_sibling_cpumask(cpu)
+	#define topology_core_cpumask(cpu)
+	#define topology_cluster_cpumask(cpu)
+	#define topology_die_cpumask(cpu)
+	#define topology_book_cpumask(cpu)
+	#define topology_drawer_cpumask(cpu)
+
+The type of ``**_id macros`` is int.
+The type of ``**_cpumask macros`` is ``(const) struct cpumask *``. The latter
+correspond with appropriate ``**_siblings`` sysfs attributes (except for
+topology_sibling_cpumask() which corresponds with thread_siblings).
+
+To be consistent on all architectures, include/linux/topology.h
+provides default definitions for any of the above macros that are
+not defined by include/asm-XXX/topology.h:
+
+1) topology_physical_package_id: -1
+2) topology_die_id: -1
+3) topology_cluster_id: -1
+4) topology_core_id: 0
+5) topology_book_id: -1
+6) topology_drawer_id: -1
+7) topology_sibling_cpumask: just the given CPU
+8) topology_core_cpumask: just the given CPU
+9) topology_cluster_cpumask: just the given CPU
+10) topology_die_cpumask: just the given CPU
+11) topology_book_cpumask:  just the given CPU
+12) topology_drawer_cpumask: just the given CPU
+
+Additionally, CPU topology information is provided under
+/sys/devices/system/cpu and includes these files.  The internal
+source for the output is in brackets ("[]").
+
+    =========== ==========================================================
+    kernel_max: the maximum CPU index allowed by the kernel configuration.
+		[NR_CPUS-1]
+
+    offline:	CPUs that are not online because they have been
+		HOTPLUGGED off or exceed the limit of CPUs allowed by the
+		kernel configuration (kernel_max above).
+		[~cpu_online_mask + cpus >= NR_CPUS]
+
+    online:	CPUs that are online and being scheduled [cpu_online_mask]
+
+    possible:	CPUs that have been allocated resources and can be
+		brought online if they are present. [cpu_possible_mask]
+
+    present:	CPUs that have been identified as being present in the
+		system. [cpu_present_mask]
+    =========== ==========================================================
+
+The format for the above output is compatible with cpulist_parse()
+[see <linux/cpumask.h>].  Some examples follow.
+
+In this example, there are 64 CPUs in the system but cpus 32-63 exceed
+the kernel max which is limited to 0..31 by the NR_CPUS config option
+being 32.  Note also that CPUs 2 and 4-31 are not online but could be
+brought online as they are both present and possible::
+
+     kernel_max: 31
+        offline: 2,4-31,32-63
+         online: 0-1,3
+       possible: 0-31
+        present: 0-31
+
+In this example, the NR_CPUS config option is 128, but the kernel was
+started with possible_cpus=144.  There are 4 CPUs in the system and cpu2
+was manually taken offline (and is the only CPU that can be brought
+online.)::
+
+     kernel_max: 127
+        offline: 2,4-127,128-143
+         online: 0-1,3
+       possible: 0-127
+        present: 0-3
+
+See Documentation/core-api/cpu_hotplug.rst for the possible_cpus=NUM
+kernel start parameter as well as more information on the various cpumasks.