Merge tag 'i3c/for-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linuxgrafted

Pull I3C updates from Alexandre Belloni:
 "A new driver this cycle, for the AMD AXI I3C controller.

  There are also new features such as IBI wakeup support, SETAASA device
  discovery and ACPI support for the the DAA methods, meaning we can now
  communicate with the SPD devices on DDR5 modules.

  New driver:
   - AMD AXI I3C master controller

  Subsystem:
   - I3C Common Command Code (CCC) handling improvements, especially
     around GET CCCs
   - SETAASA device discovery support
   - ACPI support for all existing DAA methods like SETDASA, SETNEWDA as
     well as I2C devices on I3C bus
   - IBI-based wakeup support

  Drivers:
   - dw: SETAASA support
   - mipi-i3c-hci: advertise IBI wakeup capability, AMD_PT I3C
     controller support, PIO queue management support for HCI v1.2
   - renesas: improve suspend to RAM support, add runtime PM support"

* tag 'i3c/for-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux: (70 commits)
  i3c: dw: reduce do_daa time if there's no client
  i3c: mipi-i3c-hci: Add support for AMD_PT I3C controller
  i3c: mipi-i3c-hci: Add PIO queue management support for HCI v1.2
  i3c: mipi-i3c-hci: Fix missing STAT_IBI_STATUS_THLD in PIO mode
  i3c: dw: rename "pclk" to "apb" to match dt-binding
  i3c: dw: make struct dw_i3c_cmd smaller
  i3c: dw: use COMMAND_PORT_TRANSFER_ARG instead of hardcoding
  i3c: renesas: Don't register devices when ENTDAA times out
  i3c: master: dw-i3c-master: fix OD timing for first broadcast
  i3c: mipi-i3c-hci: Advertise IBI wakeup capability
  i3c: mipi-i3c-hci: Factor out i3c_hci_sysdev()
  i3c: mipi-i3c-hci-pci: Propagate I3C wakeup requirements to PCI
  i3c: master: Reject IBI requests from non-IBI-capable devices
  i3c: master: Add helper to query bus wakeup requirements
  i3c: master: Report wakeup events for IBIs
  i3c: master: Support IBI-based wakeup capability
  i3c: master: Fix potential UAF in i3c_device_match()
  i3c: master: Fix potential UAF in i3c_device_uevent()
  i3c: Make dev->desc locking assumptions explicit
  i3c: master: Fix use-after-free of master->this
  ...

1 files changed, 117 insertions, 0 deletions

diff --git a/Documentation/admin-guide/cpu-load.rst b/Documentation/admin-guide/cpu-load.rst
new file mode 100644
index 000000000..21a984337
--- /dev/null
+++ b/Documentation/admin-guide/cpu-load.rst
@@ -0,0 +1,117 @@
+========
+CPU load
+========
+
+Linux exports various bits of information via ``/proc/stat`` and
+``/proc/uptime`` that userland tools, such as top(1), use to calculate
+the average time system spent in a particular state, for example::
+
+    $ iostat
+    Linux 2.6.18.3-exp (linmac)     02/20/2007
+
+    avg-cpu:  %user   %nice %system %iowait  %steal   %idle
+              10.01    0.00    2.92    5.44    0.00   81.63
+
+    ...
+
+Here the system thinks that over the default sampling period the
+system spent 10.01% of the time doing work in user space, 2.92% in the
+kernel, and was overall 81.63% of the time idle.
+
+In most cases the ``/proc/stat``	 information reflects the reality quite
+closely, however due to the nature of how/when the kernel collects
+this data sometimes it can not be trusted at all.
+
+So how is this information collected?  Whenever timer interrupt is
+signalled the kernel looks what kind of task was running at this
+moment and increments the counter that corresponds to this tasks
+kind/state.  The problem with this is that the system could have
+switched between various states multiple times between two timer
+interrupts yet the counter is incremented only for the last state.
+
+
+Example
+-------
+
+If we imagine the system with one task that periodically burns cycles
+in the following manner::
+
+     time line between two timer interrupts
+    |--------------------------------------|
+     ^                                    ^
+     |_ something begins working          |
+                                          |_ something goes to sleep
+                                         (only to be awaken quite soon)
+
+In the above situation the system will be 0% loaded according to the
+``/proc/stat`` (since the timer interrupt will always happen when the
+system is executing the idle handler), but in reality the load is
+closer to 99%.
+
+One can imagine many more situations where this behavior of the kernel
+will lead to quite erratic information inside ``/proc/stat``::
+
+
+	/* gcc -o hog smallhog.c */
+	#include <time.h>
+	#include <limits.h>
+	#include <signal.h>
+	#include <sys/time.h>
+	#define HIST 10
+
+	static volatile sig_atomic_t stop;
+
+	static void sighandler(int signr)
+	{
+		(void) signr;
+		stop = 1;
+	}
+
+	static unsigned long hog (unsigned long niters)
+	{
+		stop = 0;
+		while (!stop && --niters);
+		return niters;
+	}
+
+	int main (void)
+	{
+		int i;
+		struct itimerval it = {
+			.it_interval = { .tv_sec = 0, .tv_usec = 1 },
+			.it_value    = { .tv_sec = 0, .tv_usec = 1 } };
+		sigset_t set;
+		unsigned long v[HIST];
+		double tmp = 0.0;
+		unsigned long n;
+		signal(SIGALRM, &sighandler);
+		setitimer(ITIMER_REAL, &it, NULL);
+
+		hog (ULONG_MAX);
+		for (i = 0; i < HIST; ++i) v[i] = ULONG_MAX - hog(ULONG_MAX);
+		for (i = 0; i < HIST; ++i) tmp += v[i];
+		tmp /= HIST;
+		n = tmp - (tmp / 3.0);
+
+		sigemptyset(&set);
+		sigaddset(&set, SIGALRM);
+
+		for (;;) {
+			hog(n);
+			sigwait(&set, &i);
+		}
+		return 0;
+	}
+
+
+References
+----------
+
+- https://lore.kernel.org/r/loom.20070212T063225-663@post.gmane.org
+- Documentation/filesystems/proc.rst (1.8)
+
+
+Thanks
+------
+
+Con Kolivas, Pavel Machek