iio: proximity: vl53l0x-i2c: claim direct mode for raw readsgrafted

vl53l0x_read_raw() starts a single-shot ranging measurement and reads
back the result. Once the triggered buffer is enabled the sensor runs in
continuous mode and its data-ready interrupt is routed to the trigger,
so a concurrent in_distance_raw read disturbs the streaming setup and
never gets its completion, returning -ETIMEDOUT.

The original submission claimed direct mode here, but it was dropped
during review because the driver had no buffer support at the time [1].
Continuous (buffered) mode was later added without restoring the
claim [2], reintroducing the conflict.

Reject direct reads while buffered capture is active by claiming direct
mode around the measurement, as the vl53l1x sibling already does.

Fixes: 762186c6e7b1 ("iio: proximity: vl53l0x-i2c: Added continuous mode support")
Link: https://lore.kernel.org/linux-iio/20180911160300.GA9212@himanshu-Vostro-3559/ [1]
Link: https://lore.kernel.org/linux-iio/20240909101508.263085-3-abhashkumarjha123@gmail.com/ [2]
Signed-off-by: Donggeun Yoo <donggeunyoo.kernel@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>

1 files changed, 129 insertions, 0 deletions

diff --git a/Documentation/PCI/endpoint/pci-vntb-function.rst b/Documentation/PCI/endpoint/pci-vntb-function.rst
new file mode 100644
index 000000000..0c51f53ab
--- /dev/null
+++ b/Documentation/PCI/endpoint/pci-vntb-function.rst
@@ -0,0 +1,129 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+=================
+PCI vNTB Function
+=================
+
+:Author: Frank Li <Frank.Li@nxp.com>
+
+The difference between PCI NTB function and PCI vNTB function is
+
+PCI NTB function need at two endpoint instances and connect HOST1
+and HOST2.
+
+PCI vNTB function only use one host and one endpoint(EP), use NTB
+connect EP and PCI host
+
+.. code-block:: text
+
+
+  +------------+         +---------------------------------------+
+  |            |         |                                       |
+  +------------+         |                        +--------------+
+  | NTB        |         |                        | NTB          |
+  | NetDev     |         |                        | NetDev       |
+  +------------+         |                        +--------------+
+  | NTB        |         |                        | NTB          |
+  | Transfer   |         |                        | Transfer     |
+  +------------+         |                        +--------------+
+  |            |         |                        |              |
+  |  PCI NTB   |         |                        |              |
+  |    EPF     |         |                        |              |
+  |   Driver   |         |                        | PCI Virtual  |
+  |            |         +---------------+        | NTB Driver   |
+  |            |         | PCI EP NTB    |<------>|              |
+  |            |         |  FN Driver    |        |              |
+  +------------+         +---------------+        +--------------+
+  |            |         |               |        |              |
+  |  PCI BUS   | <-----> |  PCI EP BUS   |        |  Virtual PCI |
+  |            |  PCI    |               |        |     BUS      |
+  +------------+         +---------------+--------+--------------+
+      PCI RC                        PCI EP
+
+Constructs used for Implementing vNTB
+=====================================
+
+	1) Config Region
+	2) Self Scratchpad Registers
+	3) Peer Scratchpad Registers
+	4) Doorbell (DB) Registers
+	5) Memory Window (MW)
+
+
+Config Region:
+--------------
+
+It is same as PCI NTB Function driver
+
+Scratchpad Registers:
+---------------------
+
+It is appended after Config region.
+
+.. code-block:: text
+
+
+  +--------------------------------------------------+ Base
+  |                                                  |
+  |                                                  |
+  |                                                  |
+  |          Common Config Register                  |
+  |                                                  |
+  |                                                  |
+  |                                                  |
+  +-----------------------+--------------------------+ Base + span_offset
+  |                       |                          |
+  |    Peer Span Space    |    Span Space            |
+  |                       |                          |
+  |                       |                          |
+  +-----------------------+--------------------------+ Base + span_offset
+  |                       |                          |      + span_count * 4
+  |                       |                          |
+  |     Span Space        |   Peer Span Space        |
+  |                       |                          |
+  +-----------------------+--------------------------+
+        Virtual PCI             Pcie Endpoint
+        NTB Driver               NTB Driver
+
+
+Doorbell Registers:
+-------------------
+
+  Doorbell Registers are used by the hosts to interrupt each other.
+
+Memory Window:
+--------------
+
+  Actual transfer of data between the two hosts will happen using the
+  memory window.
+
+Modeling Constructs:
+====================
+
+32-bit BARs.
+
+======  ===============
+BAR NO  CONSTRUCTS USED
+======  ===============
+BAR0    Config Region
+BAR1    Doorbell
+BAR2    Memory Window 1
+BAR3    Memory Window 2
+BAR4    Memory Window 3
+BAR5    Memory Window 4
+======  ===============
+
+64-bit BARs.
+
+======  ===============================
+BAR NO  CONSTRUCTS USED
+======  ===============================
+BAR0    Config Region + Scratchpad
+BAR1
+BAR2    Doorbell
+BAR3
+BAR4    Memory Window 1
+BAR5
+======  ===============================
+
+