staging: rtl8723bs: fix OOB read in rtw_action_frame_parse()grafted

rtw_action_frame_parse() takes a frame_len parameter but never
actually checks it before indexing into the frame body:

	const u8 *frame_body = frame + sizeof(struct ieee80211_hdr_3addr);
	...
	c = frame_body[0];
	...
	a = frame_body[1];

frame_body already points 24 bytes (sizeof(struct
ieee80211_hdr_3addr)) into frame, so reading frame_body[0] and
frame_body[1] requires frame_len >= 26. A management action frame
shorter than that (e.g. exactly 24 bytes, the minimum a malicious
peer can send) causes a 1-2 byte out-of-bounds read.

This is reachable from rtw_cfg80211_monitor_if_xmit_entry() and
cfg80211_rtw_mgmt_tx() in ioctl_cfg80211.c, both of which pass
attacker/user-influenced frame buffers and lengths straight through.

Add the missing length check before frame_body is dereferenced.

Fixes: 554c0a3abf216 ("staging: Add rtl8723bs sdio wifi driver")
Cc: stable@vger.kernel.org
Signed-off-by: Muhammad Bilal <meatuni001@gmail.com>
Link: https://patch.msgid.link/20260728125456.32359-3-meatuni001@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

1 files changed, 103 insertions, 0 deletions

diff --git a/Documentation/PCI/endpoint/pci-test-function.rst b/Documentation/PCI/endpoint/pci-test-function.rst
new file mode 100644
index 000000000..3c8521d7a
--- /dev/null
+++ b/Documentation/PCI/endpoint/pci-test-function.rst
@@ -0,0 +1,103 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+=================
+PCI Test Function
+=================
+
+:Author: Kishon Vijay Abraham I <kishon@ti.com>
+
+Traditionally PCI RC has always been validated by using standard
+PCI cards like ethernet PCI cards or USB PCI cards or SATA PCI cards.
+However with the addition of EP-core in linux kernel, it is possible
+to configure a PCI controller that can operate in EP mode to work as
+a test device.
+
+The PCI endpoint test device is a virtual device (defined in software)
+used to test the endpoint functionality and serve as a sample driver
+for other PCI endpoint devices (to use the EP framework).
+
+The PCI endpoint test device has the following registers:
+
+	1) PCI_ENDPOINT_TEST_MAGIC
+	2) PCI_ENDPOINT_TEST_COMMAND
+	3) PCI_ENDPOINT_TEST_STATUS
+	4) PCI_ENDPOINT_TEST_SRC_ADDR
+	5) PCI_ENDPOINT_TEST_DST_ADDR
+	6) PCI_ENDPOINT_TEST_SIZE
+	7) PCI_ENDPOINT_TEST_CHECKSUM
+	8) PCI_ENDPOINT_TEST_IRQ_TYPE
+	9) PCI_ENDPOINT_TEST_IRQ_NUMBER
+
+* PCI_ENDPOINT_TEST_MAGIC
+
+This register will be used to test BAR0. A known pattern will be written
+and read back from MAGIC register to verify BAR0.
+
+* PCI_ENDPOINT_TEST_COMMAND
+
+This register will be used by the host driver to indicate the function
+that the endpoint device must perform.
+
+========	================================================================
+Bitfield	Description
+========	================================================================
+Bit 0		raise legacy IRQ
+Bit 1		raise MSI IRQ
+Bit 2		raise MSI-X IRQ
+Bit 3		read command (read data from RC buffer)
+Bit 4		write command (write data to RC buffer)
+Bit 5		copy command (copy data from one RC buffer to another RC buffer)
+========	================================================================
+
+* PCI_ENDPOINT_TEST_STATUS
+
+This register reflects the status of the PCI endpoint device.
+
+========	==============================
+Bitfield	Description
+========	==============================
+Bit 0		read success
+Bit 1		read fail
+Bit 2		write success
+Bit 3		write fail
+Bit 4		copy success
+Bit 5		copy fail
+Bit 6		IRQ raised
+Bit 7		source address is invalid
+Bit 8		destination address is invalid
+========	==============================
+
+* PCI_ENDPOINT_TEST_SRC_ADDR
+
+This register contains the source address (RC buffer address) for the
+COPY/READ command.
+
+* PCI_ENDPOINT_TEST_DST_ADDR
+
+This register contains the destination address (RC buffer address) for
+the COPY/WRITE command.
+
+* PCI_ENDPOINT_TEST_IRQ_TYPE
+
+This register contains the interrupt type (Legacy/MSI) triggered
+for the READ/WRITE/COPY and raise IRQ (Legacy/MSI) commands.
+
+Possible types:
+
+======	==
+Legacy	0
+MSI	1
+MSI-X	2
+======	==
+
+* PCI_ENDPOINT_TEST_IRQ_NUMBER
+
+This register contains the triggered ID interrupt.
+
+Admissible values:
+
+======	===========
+Legacy	0
+MSI	[1 .. 32]
+MSI-X	[1 .. 2048]
+======	===========