virtio_blk: set the zone write granularitygrafted

virtblk_read_zoned_limits() reads the write granularity that the device
reports in virtio_blk_zoned_characteristics and assigns it to the
physical block size and to io_min, but never to the limit that is named
after it. queue_limits.zone_write_granularity is left at zero, so
blk_validate_zoned_limits() raises it to the logical block size:

	if (lim->zone_write_granularity < lim->logical_block_size)
		lim->zone_write_granularity = lim->logical_block_size;

A device that reports a granularity coarser than its logical block size,
which is what the field exists to express, therefore has it silently
reduced. A 512e host managed disk passed through to a guest reports a
logical block size of 512 and a write granularity of 4096, and the guest
ends up with a zone write granularity of 512.

bio_split_alignment() returns lim->zone_write_granularity if it is non-zero
and bio_split_io_at() may split a bio with as per bio_split_alignment().
This can real to the write getting rejected by the host drive, as the write
is not aligned to the physical block size.

zonefs also takes its block size from bdev_zone_write_granularity(), so it
would incorrectly use 512 on a disk that requires 4096.

sd_zbc_read_zones() sets the limit from the physical block size for the
same reason. NVMe ZNS and null_blk leave it unset, but the fallback
gives the right answer for them, as their write granularity is the
logical block size. virtio carries a separate value that may exceed it.

Set the zone write granularity from the value that the device reports.

Fixes: 95bfec41bd3d ("virtio-blk: add support for zoned block devices")
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Link: https://patch.msgid.link/20260918140641.2031075-2-cassel@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>

2 files changed, 64 insertions, 0 deletions

diff --git a/Documentation/PCI/endpoint/function/binding/pci-ntb.rst b/Documentation/PCI/endpoint/function/binding/pci-ntb.rst
new file mode 100644
index 000000000..40253d3d5
--- /dev/null
+++ b/Documentation/PCI/endpoint/function/binding/pci-ntb.rst
@@ -0,0 +1,38 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+==========================
+PCI NTB Endpoint Function
+==========================
+
+1) Create a subdirectory to pci_epf_ntb directory in configfs.
+
+Standard EPF Configurable Fields:
+
+================   ===========================================================
+vendorid	   should be 0x104c
+deviceid	   should be 0xb00d for TI's J721E SoC
+revid		   don't care
+progif_code	   don't care
+subclass_code	   should be 0x00
+baseclass_code	   should be 0x5
+cache_line_size	   don't care
+subsys_vendor_id   don't care
+subsys_id	   don't care
+interrupt_pin	   don't care
+msi_interrupts	   don't care
+msix_interrupts	   don't care
+================   ===========================================================
+
+2) Create a subdirectory to directory created in 1
+
+NTB EPF specific configurable fields:
+
+================   ===========================================================
+db_count	   Number of doorbells; default = 4
+mw1     	   size of memory window1
+mw2     	   size of memory window2
+mw3     	   size of memory window3
+mw4     	   size of memory window4
+num_mws     	   Number of memory windows; max = 4
+spad_count     	   Number of scratchpad registers; default = 64
+================   ===========================================================
diff --git a/Documentation/PCI/endpoint/function/binding/pci-test.rst b/Documentation/PCI/endpoint/function/binding/pci-test.rst
new file mode 100644
index 000000000..57ee866fb
--- /dev/null
+++ b/Documentation/PCI/endpoint/function/binding/pci-test.rst
@@ -0,0 +1,26 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+==========================
+PCI Test Endpoint Function
+==========================
+
+name: Should be "pci_epf_test" to bind to the pci_epf_test driver.
+
+Configurable Fields:
+
+================   ===========================================================
+vendorid	   should be 0x104c
+deviceid	   should be 0xb500 for DRA74x and 0xb501 for DRA72x
+revid		   don't care
+progif_code	   don't care
+subclass_code	   don't care
+baseclass_code	   should be 0xff
+cache_line_size	   don't care
+subsys_vendor_id   don't care
+subsys_id	   don't care
+interrupt_pin	   Should be 1 - INTA, 2 - INTB, 3 - INTC, 4 -INTD
+msi_interrupts	   Should be 1 to 32 depending on the number of MSI interrupts
+		   to test
+msix_interrupts	   Should be 1 to 2048 depending on the number of MSI-X
+		   interrupts to test
+================   ===========================================================