Merge tag 'i3c/for-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linuxgrafted

Pull I3C updates from Alexandre Belloni:
 "A new driver this cycle, for the AMD AXI I3C controller.

  There are also new features such as IBI wakeup support, SETAASA device
  discovery and ACPI support for the the DAA methods, meaning we can now
  communicate with the SPD devices on DDR5 modules.

  New driver:
   - AMD AXI I3C master controller

  Subsystem:
   - I3C Common Command Code (CCC) handling improvements, especially
     around GET CCCs
   - SETAASA device discovery support
   - ACPI support for all existing DAA methods like SETDASA, SETNEWDA as
     well as I2C devices on I3C bus
   - IBI-based wakeup support

  Drivers:
   - dw: SETAASA support
   - mipi-i3c-hci: advertise IBI wakeup capability, AMD_PT I3C
     controller support, PIO queue management support for HCI v1.2
   - renesas: improve suspend to RAM support, add runtime PM support"

* tag 'i3c/for-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux: (70 commits)
  i3c: dw: reduce do_daa time if there's no client
  i3c: mipi-i3c-hci: Add support for AMD_PT I3C controller
  i3c: mipi-i3c-hci: Add PIO queue management support for HCI v1.2
  i3c: mipi-i3c-hci: Fix missing STAT_IBI_STATUS_THLD in PIO mode
  i3c: dw: rename "pclk" to "apb" to match dt-binding
  i3c: dw: make struct dw_i3c_cmd smaller
  i3c: dw: use COMMAND_PORT_TRANSFER_ARG instead of hardcoding
  i3c: renesas: Don't register devices when ENTDAA times out
  i3c: master: dw-i3c-master: fix OD timing for first broadcast
  i3c: mipi-i3c-hci: Advertise IBI wakeup capability
  i3c: mipi-i3c-hci: Factor out i3c_hci_sysdev()
  i3c: mipi-i3c-hci-pci: Propagate I3C wakeup requirements to PCI
  i3c: master: Reject IBI requests from non-IBI-capable devices
  i3c: master: Add helper to query bus wakeup requirements
  i3c: master: Report wakeup events for IBIs
  i3c: master: Support IBI-based wakeup capability
  i3c: master: Fix potential UAF in i3c_device_match()
  i3c: master: Fix potential UAF in i3c_device_uevent()
  i3c: Make dev->desc locking assumptions explicit
  i3c: master: Fix use-after-free of master->this
  ...

1 files changed, 115 insertions, 0 deletions

diff --git a/Documentation/Makefile b/Documentation/Makefile
new file mode 100644
index 000000000..377a44965
--- /dev/null
+++ b/Documentation/Makefile
@@ -0,0 +1,115 @@
+# -*- makefile -*-
+# Makefile for Sphinx documentation
+#
+
+# for cleaning
+subdir- := devicetree/bindings
+
+ifneq ($(MAKECMDGOALS),cleandocs)
+# Check for broken documentation file references
+ifeq ($(CONFIG_WARN_MISSING_DOCUMENTS),y)
+$(shell $(srctree)/tools/docs/documentation-file-ref-check --warn)
+endif
+
+# Check for broken ABI files
+ifeq ($(CONFIG_WARN_ABI_ERRORS),y)
+$(shell $(srctree)/tools/docs/get_abi.py --dir $(srctree)/Documentation/ABI validate)
+endif
+endif
+
+# You can set these variables from the command line.
+SPHINXBUILD   = sphinx-build
+SPHINXOPTS    =
+SPHINXDIRS    = .
+DOCS_THEME    =
+DOCS_CSS      =
+RUSTDOC       =
+PAPER         =
+BUILDDIR      = $(obj)/output
+PDFLATEX      = xelatex
+LATEXOPTS     = -interaction=batchmode -no-shell-escape
+
+PYTHONPYCACHEPREFIX ?= $(abspath $(BUILDDIR)/__pycache__)
+
+# Wrapper for sphinx-build
+
+BUILD_WRAPPER = $(srctree)/tools/docs/sphinx-build-wrapper
+
+# For denylisting "variable font" files
+# Can be overridden by setting as an env variable
+FONTS_CONF_DENY_VF ?= $(HOME)/deny-vf
+
+# User-friendly check for sphinx-build
+HAVE_SPHINX := $(shell if which $(SPHINXBUILD) >/dev/null 2>&1; then echo 1; else echo 0; fi)
+
+ifeq ($(HAVE_SPHINX),0)
+
+.DEFAULT:
+	$(warning The '$(SPHINXBUILD)' command was not found. Make sure you have Sphinx installed and in PATH, or set the SPHINXBUILD make variable to point to the full path of the '$(SPHINXBUILD)' executable.)
+	@echo
+	@$(srctree)/tools/docs/sphinx-pre-install
+	@echo "  SKIP    Sphinx $@ target."
+
+else # HAVE_SPHINX
+
+# Common documentation targets
+htmldocs mandocs infodocs texinfodocs latexdocs epubdocs xmldocs pdfdocs linkcheckdocs:
+	$(Q)PYTHONPYCACHEPREFIX="$(PYTHONPYCACHEPREFIX)" \
+		$(srctree)/tools/docs/sphinx-pre-install --version-check
+	+$(Q)PYTHONPYCACHEPREFIX="$(PYTHONPYCACHEPREFIX)" \
+		$(PYTHON3) $(BUILD_WRAPPER) $@ \
+		--sphinxdirs="$(SPHINXDIRS)" $(RUSTDOC) \
+		--builddir="$(BUILDDIR)" --deny-vf=$(FONTS_CONF_DENY_VF) \
+		--theme=$(DOCS_THEME) --css=$(DOCS_CSS) --paper=$(PAPER)
+
+
+endif
+
+# The following targets are independent of HAVE_SPHINX, and the rules should
+# work or silently pass without Sphinx.
+
+htmldocs-redirects: $(srctree)/Documentation/.renames.txt
+	@tools/docs/gen-redirects.py --output $(BUILDDIR) < $<
+
+refcheckdocs:
+	$(Q)cd $(srctree); tools/docs/documentation-file-ref-check
+
+cleandocs:
+	$(Q)rm -rf $(BUILDDIR)
+
+# Used only on help
+_SPHINXDIRS   = $(shell printf "%s\n" $(patsubst $(srctree)/Documentation/%/index.rst,%,$(wildcard $(srctree)/Documentation/*/index.rst)) | sort -f)
+
+dochelp:
+	@echo  ' Linux kernel internal documentation in different formats from ReST:'
+	@echo  '  htmldocs        - HTML'
+	@echo  '  htmldocs-redirects - generate HTML redirects for moved pages'
+	@echo  '  texinfodocs     - Texinfo'
+	@echo  '  infodocs        - Info'
+	@echo  '  mandocs         - Man pages'
+	@echo  '  latexdocs       - LaTeX'
+	@echo  '  pdfdocs         - PDF'
+	@echo  '  epubdocs        - EPUB'
+	@echo  '  xmldocs         - XML'
+	@echo  '  linkcheckdocs   - check for broken external links'
+	@echo  '                    (will connect to external hosts)'
+	@echo  '  refcheckdocs    - check for references to non-existing files under'
+	@echo  '                    Documentation'
+	@echo  '  cleandocs       - clean all generated files'
+	@echo
+	@echo  '  make SPHINXDIRS="s1 s2" [target] Generate only docs of folder s1, s2'
+	@echo  '  top level values for SPHINXDIRS are:'
+	@echo  '$(_SPHINXDIRS)' | fmt -s -w 75 -g 75 | sed 's/^/    /'
+	@echo  '  you may also use a subdirectory like SPHINXDIRS=userspace-api/media,'
+	@echo  '  provided that there is an index.rst file at the subdirectory.'
+	@echo
+	@echo  '  make DOCS_THEME={sphinx-theme} selects a different Sphinx theme.'
+	@echo
+	@echo  '  make DOCS_CSS={a .css file} adds a DOCS_CSS override file for html/epub output.'
+	@echo
+	@echo  '  make PAPER={a4|letter} Specifies the paper size used for LaTeX/PDF output.'
+	@echo
+	@echo  '  make FONTS_CONF_DENY_VF={path} sets a deny list to block variable Noto CJK fonts'
+	@echo  '  for PDF build. See tools/lib/python/kdoc/latex_fonts.py for more details'
+	@echo
+	@echo  '  Default location for the generated documents is Documentation/output'