drm/amd/display: Try RGB before YCbCr 4:4:4 in stream validationgrafted

amdgpu_dm_create_validate_stream_for_sink() walks encoding_order[] and
uses the first encoding that validates. YCbCr 4:4:4 is listed before
RGB, so an HDMI sink that advertises 4:4:4 gets YCbCr 4:4:4 whenever the
"color format" property is left at AUTO, even though RGB fits the same
link.

That contradicts the documented AUTO behaviour for HDMI in enum
drm_connector_color_format (RGB, falling back to YCbCr 4:2:0 only when
the bandwidth is not available or the mode is 4:2:0-only), which the
amdgpu implementation of the property also describes. It also leaves
the "Broadcast RGB" property without effect on such sinks, since the
quantization range it selects only applies to RGB output.

Try RGB first. The mask still holds every encoding the sink supports,
so a mode that cannot carry RGB falls back exactly as before.

For reference, v7.2 picked RGB here unless YCbCr 4:4:4 was forced
through debugfs, while earlier kernels picked YCbCr 4:4:4 for any HDMI
sink that advertised it.

Fixes: 0b0ff65d3ca1 ("drm/amd/display: Refactor stream validation")
Suggested-by: Adolfo Rodrigues <adolfotregosa@gmail.com>
Assisted-by: Claude Code:claude-fable-5-1
Signed-off-by: Adrian Betschart <adrian.betschart@cinemaone.ch>
Reviewed-by: Fangzhi Zuo <jerry.zuo@amd.com>
Tested-by: Adolfo Rodrigues <adolfotregosa@gmail.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 7de432bc753133764dc40d37f9388da56de251e7)

1 files changed, 115 insertions, 0 deletions

diff --git a/Documentation/Makefile b/Documentation/Makefile
new file mode 100644
index 000000000..377a44965
--- /dev/null
+++ b/Documentation/Makefile
@@ -0,0 +1,115 @@
+# -*- makefile -*-
+# Makefile for Sphinx documentation
+#
+
+# for cleaning
+subdir- := devicetree/bindings
+
+ifneq ($(MAKECMDGOALS),cleandocs)
+# Check for broken documentation file references
+ifeq ($(CONFIG_WARN_MISSING_DOCUMENTS),y)
+$(shell $(srctree)/tools/docs/documentation-file-ref-check --warn)
+endif
+
+# Check for broken ABI files
+ifeq ($(CONFIG_WARN_ABI_ERRORS),y)
+$(shell $(srctree)/tools/docs/get_abi.py --dir $(srctree)/Documentation/ABI validate)
+endif
+endif
+
+# You can set these variables from the command line.
+SPHINXBUILD   = sphinx-build
+SPHINXOPTS    =
+SPHINXDIRS    = .
+DOCS_THEME    =
+DOCS_CSS      =
+RUSTDOC       =
+PAPER         =
+BUILDDIR      = $(obj)/output
+PDFLATEX      = xelatex
+LATEXOPTS     = -interaction=batchmode -no-shell-escape
+
+PYTHONPYCACHEPREFIX ?= $(abspath $(BUILDDIR)/__pycache__)
+
+# Wrapper for sphinx-build
+
+BUILD_WRAPPER = $(srctree)/tools/docs/sphinx-build-wrapper
+
+# For denylisting "variable font" files
+# Can be overridden by setting as an env variable
+FONTS_CONF_DENY_VF ?= $(HOME)/deny-vf
+
+# User-friendly check for sphinx-build
+HAVE_SPHINX := $(shell if which $(SPHINXBUILD) >/dev/null 2>&1; then echo 1; else echo 0; fi)
+
+ifeq ($(HAVE_SPHINX),0)
+
+.DEFAULT:
+	$(warning The '$(SPHINXBUILD)' command was not found. Make sure you have Sphinx installed and in PATH, or set the SPHINXBUILD make variable to point to the full path of the '$(SPHINXBUILD)' executable.)
+	@echo
+	@$(srctree)/tools/docs/sphinx-pre-install
+	@echo "  SKIP    Sphinx $@ target."
+
+else # HAVE_SPHINX
+
+# Common documentation targets
+htmldocs mandocs infodocs texinfodocs latexdocs epubdocs xmldocs pdfdocs linkcheckdocs:
+	$(Q)PYTHONPYCACHEPREFIX="$(PYTHONPYCACHEPREFIX)" \
+		$(srctree)/tools/docs/sphinx-pre-install --version-check
+	+$(Q)PYTHONPYCACHEPREFIX="$(PYTHONPYCACHEPREFIX)" \
+		$(PYTHON3) $(BUILD_WRAPPER) $@ \
+		--sphinxdirs="$(SPHINXDIRS)" $(RUSTDOC) \
+		--builddir="$(BUILDDIR)" --deny-vf=$(FONTS_CONF_DENY_VF) \
+		--theme=$(DOCS_THEME) --css=$(DOCS_CSS) --paper=$(PAPER)
+
+
+endif
+
+# The following targets are independent of HAVE_SPHINX, and the rules should
+# work or silently pass without Sphinx.
+
+htmldocs-redirects: $(srctree)/Documentation/.renames.txt
+	@tools/docs/gen-redirects.py --output $(BUILDDIR) < $<
+
+refcheckdocs:
+	$(Q)cd $(srctree); tools/docs/documentation-file-ref-check
+
+cleandocs:
+	$(Q)rm -rf $(BUILDDIR)
+
+# Used only on help
+_SPHINXDIRS   = $(shell printf "%s\n" $(patsubst $(srctree)/Documentation/%/index.rst,%,$(wildcard $(srctree)/Documentation/*/index.rst)) | sort -f)
+
+dochelp:
+	@echo  ' Linux kernel internal documentation in different formats from ReST:'
+	@echo  '  htmldocs        - HTML'
+	@echo  '  htmldocs-redirects - generate HTML redirects for moved pages'
+	@echo  '  texinfodocs     - Texinfo'
+	@echo  '  infodocs        - Info'
+	@echo  '  mandocs         - Man pages'
+	@echo  '  latexdocs       - LaTeX'
+	@echo  '  pdfdocs         - PDF'
+	@echo  '  epubdocs        - EPUB'
+	@echo  '  xmldocs         - XML'
+	@echo  '  linkcheckdocs   - check for broken external links'
+	@echo  '                    (will connect to external hosts)'
+	@echo  '  refcheckdocs    - check for references to non-existing files under'
+	@echo  '                    Documentation'
+	@echo  '  cleandocs       - clean all generated files'
+	@echo
+	@echo  '  make SPHINXDIRS="s1 s2" [target] Generate only docs of folder s1, s2'
+	@echo  '  top level values for SPHINXDIRS are:'
+	@echo  '$(_SPHINXDIRS)' | fmt -s -w 75 -g 75 | sed 's/^/    /'
+	@echo  '  you may also use a subdirectory like SPHINXDIRS=userspace-api/media,'
+	@echo  '  provided that there is an index.rst file at the subdirectory.'
+	@echo
+	@echo  '  make DOCS_THEME={sphinx-theme} selects a different Sphinx theme.'
+	@echo
+	@echo  '  make DOCS_CSS={a .css file} adds a DOCS_CSS override file for html/epub output.'
+	@echo
+	@echo  '  make PAPER={a4|letter} Specifies the paper size used for LaTeX/PDF output.'
+	@echo
+	@echo  '  make FONTS_CONF_DENY_VF={path} sets a deny list to block variable Noto CJK fonts'
+	@echo  '  for PDF build. See tools/lib/python/kdoc/latex_fonts.py for more details'
+	@echo
+	@echo  '  Default location for the generated documents is Documentation/output'