Merge tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrlgrafted

Pull pin control updates from Linus Walleij:
 "Core changes:

   - Use the non-blocking mux_state_try_select() in the generic MUX pin
     control back-end

   - Free pin maps on pinctrl_generic_to_map() failure in the core
     helpers

  New hardware pin control:

   - Qualcomm Maili TLMM SoC, PMG1110 PMIC, and Eliza LPASS LPI TLMM SoC
     (this is for the low power audio, LPASS = Low Power Audio SubSystem
     portions)

   - Upboard support on top of the Intel pin controller

   - Apple T6030 and T6031 support (just compatible strings)

   - Samsung Exynos 8855 SoC

   - Mediatek MT6858 SoC

   - Rockchip RK3308B and RV1106 SoCs

   - Airoha EN7523 and AN7563 SoCs

  Improvements:

   - Qualcomm TLMM GPIOs are unconditionally marked as wakeup capable

   - Qualcomm improvements on top of the Qualcomm PDC (power domain
     controller) irqchip improvements from tglx:s tree

   - Qualcomm IPQ806x and IPQ9650 non-urgent pin grop fixups

   - The NPCM8xx driver has been put into shape fixing many pin and
     group definitions

   - Some non-urgent Tegra 264 pin assignments are fixed up

   - Some non-urgent fixups to Airoha AN7581 and AN7583 registers and
     pin assignments, missing features etc"

* tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (130 commits)
  dt-bindings: pinctrl: Convert TI DA850 pupd to DT schema
  pinctrl: meson: sync some modify from A4
  pinctrl: meson: a4: Add input enable pin configuration
  pinctrl: realtek: rtd1625: remove unused group name spdif_sel
  pinctrl: realtek: rtd1625: fix base_bit for VE4 GPIO 13
  dt-bindings: pinctrl: microchip,pic32mzda-pinctrl: Convert to DT schema
  Revert "Merge branch 'ib-rsk7204' into devel"
  pinctrl: rockchip: Add RV1106 pinctrl support
  dt-bindings: pinctrl: rockchip: Add RV1106 compatible
  pinctrl: rockchip: Decode drive strength in the get function
  pinctrl: fix PINCTRL_GENERIC_MUX not always being selectable
  pinctrl: airoha: add support of an7563 SoC
  dt-bindings: pinctrl: airoha: add support of an7563 pin controller
  pinctrl: airoha: try to find chip scu node by phandle first
  pinctrl: airoha: add support of en7523 SoC
  dt-bindings: pinctrl: airoha: add support of en7523 pin controller
  pinctrl: airoha: an7583: add support for olt pinmux
  pinctrl: airoha: an7583: add support for pon_alt pinmux
  pinctrl: airoha: an7583: add support for npu_uart pinmux
  dt-bindings: pinctrl: airoha: an7583: add missed features
  ...

1 files changed, 65 insertions, 0 deletions

diff --git a/Documentation/ABI/testing/sysfs-secvar b/Documentation/ABI/testing/sysfs-secvar
new file mode 100644
index 000000000..c52a5fd15
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-secvar
@@ -0,0 +1,65 @@
+What:		/sys/firmware/secvar
+Date:		August 2019
+Contact:	Nayna Jain <nayna@linux.ibm.com>
+Description:	This directory is created if the POWER firmware supports OS
+		secureboot, thereby secure variables. It exposes interface
+		for reading/writing the secure variables
+
+What:		/sys/firmware/secvar/vars
+Date:		August 2019
+Contact:	Nayna Jain <nayna@linux.ibm.com>
+Description:	This directory lists all the secure variables that are supported
+		by the firmware.
+
+What:		/sys/firmware/secvar/format
+Date:		August 2019
+Contact:	Nayna Jain <nayna@linux.ibm.com>
+Description:	A string indicating which backend is in use by the firmware.
+		This determines the format of the variable and the accepted
+		format of variable updates.
+
+		On powernv/OPAL, this value is provided by the OPAL firmware
+		and is expected to be "ibm,edk2-compat-v1".
+
+		On pseries/PLPKS, this is generated by the kernel based on the
+		version number in the SB_VERSION variable in the keystore. The
+		version numbering in the SB_VERSION variable starts from 1. The
+		format string takes the form "ibm,plpks-sb-v<version>" in the
+		case of dynamic key management mode. If the SB_VERSION variable
+		does not exist (or there is an error while reading it), it takes
+		the form "ibm,plpks-sb-v0", indicating that the key management
+		mode is static.
+
+What:		/sys/firmware/secvar/vars/<variable name>
+Date:		August 2019
+Contact:	Nayna Jain <nayna@linux.ibm.com>
+Description:	Each secure variable is represented as a directory named as
+		<variable_name>. The variable name is unique and is in ASCII
+		representation. The data and size can be determined by reading
+		their respective attribute files.
+
+		Only secvars relevant to the key management mode are exposed.
+		Only in the dynamic key management mode should the user have
+		access (read and write) to the secure boot secvars db, dbx,
+		grubdb, grubdbx, and sbat. These secvars are not consumed in the
+		static key management mode. PK, trustedcadb and moduledb are the
+		secvars common to both static and dynamic key management modes.
+
+What:		/sys/firmware/secvar/vars/<variable_name>/size
+Date:		August 2019
+Contact:	Nayna Jain <nayna@linux.ibm.com>
+Description:	An integer representation of the size of the content of the
+		variable. In other words, it represents the size of the data.
+
+What:		/sys/firmware/secvar/vars/<variable_name>/data
+Date:		August 2019
+Contact:	Nayna Jain <nayna@linux.ibm.com>
+Description:	A read-only file containing the value of the variable. The size
+		of the file represents the maximum size of the variable data.
+
+What:		/sys/firmware/secvar/vars/<variable_name>/update
+Date:		August 2019
+Contact:	Nayna Jain <nayna@linux.ibm.com>
+Description:	A write-only file that is used to submit the new value for the
+		variable. The size of the file represents the maximum size of
+		the variable data that can be written.