Merge tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrlgrafted

Pull pin control updates from Linus Walleij:
 "Core changes:

   - Use the non-blocking mux_state_try_select() in the generic MUX pin
     control back-end

   - Free pin maps on pinctrl_generic_to_map() failure in the core
     helpers

  New hardware pin control:

   - Qualcomm Maili TLMM SoC, PMG1110 PMIC, and Eliza LPASS LPI TLMM SoC
     (this is for the low power audio, LPASS = Low Power Audio SubSystem
     portions)

   - Upboard support on top of the Intel pin controller

   - Apple T6030 and T6031 support (just compatible strings)

   - Samsung Exynos 8855 SoC

   - Mediatek MT6858 SoC

   - Rockchip RK3308B and RV1106 SoCs

   - Airoha EN7523 and AN7563 SoCs

  Improvements:

   - Qualcomm TLMM GPIOs are unconditionally marked as wakeup capable

   - Qualcomm improvements on top of the Qualcomm PDC (power domain
     controller) irqchip improvements from tglx:s tree

   - Qualcomm IPQ806x and IPQ9650 non-urgent pin grop fixups

   - The NPCM8xx driver has been put into shape fixing many pin and
     group definitions

   - Some non-urgent Tegra 264 pin assignments are fixed up

   - Some non-urgent fixups to Airoha AN7581 and AN7583 registers and
     pin assignments, missing features etc"

* tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (130 commits)
  dt-bindings: pinctrl: Convert TI DA850 pupd to DT schema
  pinctrl: meson: sync some modify from A4
  pinctrl: meson: a4: Add input enable pin configuration
  pinctrl: realtek: rtd1625: remove unused group name spdif_sel
  pinctrl: realtek: rtd1625: fix base_bit for VE4 GPIO 13
  dt-bindings: pinctrl: microchip,pic32mzda-pinctrl: Convert to DT schema
  Revert "Merge branch 'ib-rsk7204' into devel"
  pinctrl: rockchip: Add RV1106 pinctrl support
  dt-bindings: pinctrl: rockchip: Add RV1106 compatible
  pinctrl: rockchip: Decode drive strength in the get function
  pinctrl: fix PINCTRL_GENERIC_MUX not always being selectable
  pinctrl: airoha: add support of an7563 SoC
  dt-bindings: pinctrl: airoha: add support of an7563 pin controller
  pinctrl: airoha: try to find chip scu node by phandle first
  pinctrl: airoha: add support of en7523 SoC
  dt-bindings: pinctrl: airoha: add support of en7523 pin controller
  pinctrl: airoha: an7583: add support for olt pinmux
  pinctrl: airoha: an7583: add support for pon_alt pinmux
  pinctrl: airoha: an7583: add support for npu_uart pinmux
  dt-bindings: pinctrl: airoha: an7583: add missed features
  ...

1 files changed, 84 insertions, 0 deletions

diff --git a/Documentation/ABI/testing/sysfs-module b/Documentation/ABI/testing/sysfs-module
new file mode 100644
index 000000000..d5b7d19bd
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-module
@@ -0,0 +1,84 @@
+What:		/sys/module/pch_phub/drivers/.../pch_mac
+Date:		August 2010
+KernelVersion:	2.6.35
+Contact:	masa-korg@dsn.okisemi.com
+Description:	Write/read GbE MAC address.
+
+What:		/sys/module/pch_phub/drivers/.../pch_firmware
+Date:		August 2010
+KernelVersion:	2.6.35
+Contact:	masa-korg@dsn.okisemi.com
+Description:	Write/read Option ROM data.
+
+
+What:		/sys/module/ehci_hcd/drivers/.../uframe_periodic_max
+Date:		July 2011
+KernelVersion:	3.1
+Contact:	Kirill Smelkov <kirr@mns.spb.ru>
+Description:	Maximum time allowed for periodic transfers per microframe (μs)
+
+		Note:
+		  USB 2.0 sets maximum allowed time for periodic transfers per
+		  microframe to be 80%, that is 100 microseconds out of 125
+		  microseconds (full microframe).
+
+		  However there are cases, when 80% max isochronous bandwidth is
+		  too limiting. For example two video streams could require 110
+		  microseconds of isochronous bandwidth per microframe to work
+		  together.
+
+		Through this setting it is possible to raise the limit so that
+		the host controller would allow allocating more than 100
+		microseconds of periodic bandwidth per microframe.
+
+		Beware, non-standard modes are usually not thoroughly tested by
+		hardware designers, and the hardware can malfunction when this
+		setting differ from default 100.
+
+What:		/sys/module/*/{coresize,initsize}
+Date:		Jan 2012
+KernelVersion:	3.3
+Contact:	Kay Sievers <kay.sievers@vrfy.org>
+Description:	Module size in bytes.
+
+What:		/sys/module/*/initstate
+Date:		Nov 2006
+KernelVersion:	2.6.19
+Contact:	Kay Sievers <kay.sievers@vrfy.org>
+Description:	Show the initialization state(live, coming, going) of
+		the module.
+
+What:		/sys/module/*/import_ns
+Date:		January 2026
+KernelVersion:	7.1
+Contact:	linux-modules@vger.kernel.org
+Description:	List of symbol namespaces imported by this module via
+		MODULE_IMPORT_NS(). Each namespace appears on a separate line.
+		This file only exists for modules that import at least one
+		namespace.
+
+What:		/sys/module/*/taint
+Date:		Jan 2012
+KernelVersion:	3.3
+Contact:	Kay Sievers <kay.sievers@vrfy.org>
+Description:	Module taint flags:
+			==  =====================
+			P   proprietary module
+			O   out-of-tree module
+			F   force-loaded module
+			C   staging driver module
+			E   unsigned module
+			K   livepatch module
+			N   in-kernel test module
+			==  =====================
+
+What:		/sys/module/grant_table/parameters/free_per_iteration
+Date:		July 2023
+KernelVersion:	6.5 but backported to all supported stable branches
+Contact:	Xen developer discussion <xen-devel@lists.xenproject.org>
+Description:	Read and write number of grant entries to attempt to free per iteration.
+
+		Note: Future versions of Xen and Linux may provide a better
+		interface for controlling the rate of deferred grant reclaim
+		or may not need it at all.
+Users:		Qubes OS (https://www.qubes-os.org)