Merge tag 'i3c/for-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linuxgrafted

Pull I3C updates from Alexandre Belloni:
 "A new driver this cycle, for the AMD AXI I3C controller.

  There are also new features such as IBI wakeup support, SETAASA device
  discovery and ACPI support for the the DAA methods, meaning we can now
  communicate with the SPD devices on DDR5 modules.

  New driver:
   - AMD AXI I3C master controller

  Subsystem:
   - I3C Common Command Code (CCC) handling improvements, especially
     around GET CCCs
   - SETAASA device discovery support
   - ACPI support for all existing DAA methods like SETDASA, SETNEWDA as
     well as I2C devices on I3C bus
   - IBI-based wakeup support

  Drivers:
   - dw: SETAASA support
   - mipi-i3c-hci: advertise IBI wakeup capability, AMD_PT I3C
     controller support, PIO queue management support for HCI v1.2
   - renesas: improve suspend to RAM support, add runtime PM support"

* tag 'i3c/for-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux: (70 commits)
  i3c: dw: reduce do_daa time if there's no client
  i3c: mipi-i3c-hci: Add support for AMD_PT I3C controller
  i3c: mipi-i3c-hci: Add PIO queue management support for HCI v1.2
  i3c: mipi-i3c-hci: Fix missing STAT_IBI_STATUS_THLD in PIO mode
  i3c: dw: rename "pclk" to "apb" to match dt-binding
  i3c: dw: make struct dw_i3c_cmd smaller
  i3c: dw: use COMMAND_PORT_TRANSFER_ARG instead of hardcoding
  i3c: renesas: Don't register devices when ENTDAA times out
  i3c: master: dw-i3c-master: fix OD timing for first broadcast
  i3c: mipi-i3c-hci: Advertise IBI wakeup capability
  i3c: mipi-i3c-hci: Factor out i3c_hci_sysdev()
  i3c: mipi-i3c-hci-pci: Propagate I3C wakeup requirements to PCI
  i3c: master: Reject IBI requests from non-IBI-capable devices
  i3c: master: Add helper to query bus wakeup requirements
  i3c: master: Report wakeup events for IBIs
  i3c: master: Support IBI-based wakeup capability
  i3c: master: Fix potential UAF in i3c_device_match()
  i3c: master: Fix potential UAF in i3c_device_uevent()
  i3c: Make dev->desc locking assumptions explicit
  i3c: master: Fix use-after-free of master->this
  ...

1 files changed, 118 insertions, 0 deletions

diff --git a/Documentation/ABI/testing/sysfs-fs-ext4 b/Documentation/ABI/testing/sysfs-fs-ext4
new file mode 100644
index 000000000..2edd0a667
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-fs-ext4
@@ -0,0 +1,118 @@
+What:		/sys/fs/ext4/<disk>/mb_stats
+Date:		March 2008
+Contact:	"Theodore Ts'o" <tytso@mit.edu>
+Description:
+		 Controls whether the multiblock allocator should
+		 collect statistics, which are shown during the unmount.
+		 1 means to collect statistics, 0 means not to collect
+		 statistics
+
+What:		/sys/fs/ext4/<disk>/mb_group_prealloc
+Date:		March 2008
+Contact:	"Theodore Ts'o" <tytso@mit.edu>
+Description:
+		The multiblock allocator will round up allocation
+		requests to a multiple of this tuning parameter if the
+		stripe size is not set in the ext4 superblock
+
+What:		/sys/fs/ext4/<disk>/mb_max_to_scan
+Date:		March 2008
+Contact:	"Theodore Ts'o" <tytso@mit.edu>
+Description:
+		The maximum number of extents the multiblock allocator
+		will search to find the best extent
+
+What:		/sys/fs/ext4/<disk>/mb_min_to_scan
+Date:		March 2008
+Contact:	"Theodore Ts'o" <tytso@mit.edu>
+Description:
+		The minimum number of extents the multiblock allocator
+		will search to find the best extent
+
+What:		/sys/fs/ext4/<disk>/mb_order2_req
+Date:		March 2008
+Contact:	"Theodore Ts'o" <tytso@mit.edu>
+Description:
+		Tuning parameter which controls the minimum size for
+		requests (as a power of 2) where the buddy cache is
+		used
+
+What:		/sys/fs/ext4/<disk>/mb_stream_req
+Date:		March 2008
+Contact:	"Theodore Ts'o" <tytso@mit.edu>
+Description:
+		Files which have fewer blocks than this tunable
+		parameter will have their blocks allocated out of a
+		block group specific preallocation pool, so that small
+		files are packed closely together.  Each large file
+		will have its blocks allocated out of its own unique
+		preallocation pool.
+
+What:		/sys/fs/ext4/<disk>/inode_readahead_blks
+Date:		March 2008
+Contact:	"Theodore Ts'o" <tytso@mit.edu>
+Description:
+		Tuning parameter which controls the maximum number of
+		inode table blocks that ext4's inode table readahead
+		algorithm will pre-read into the buffer cache
+
+What:		/sys/fs/ext4/<disk>/delayed_allocation_blocks
+Date:		March 2008
+Contact:	"Theodore Ts'o" <tytso@mit.edu>
+Description:
+		This file is read-only and shows the number of blocks
+		that are dirty in the page cache, but which do not
+		have their location in the filesystem allocated yet.
+
+What:		/sys/fs/ext4/<disk>/lifetime_write_kbytes
+Date:		March 2008
+Contact:	"Theodore Ts'o" <tytso@mit.edu>
+Description:
+		This file is read-only and shows the number of kilobytes
+		of data that have been written to this filesystem since it was
+		created.
+
+What:		/sys/fs/ext4/<disk>/session_write_kbytes
+Date:		March 2008
+Contact:	"Theodore Ts'o" <tytso@mit.edu>
+Description:
+		This file is read-only and shows the number of
+		kilobytes of data that have been written to this
+		filesystem since it was mounted.
+
+What:		/sys/fs/ext4/<disk>/inode_goal
+Date:		June 2008
+Contact:	"Theodore Ts'o" <tytso@mit.edu>
+Description:
+		Tuning parameter which (if non-zero) controls the goal
+		inode used by the inode allocator in preference to
+		all other allocation heuristics.  This is intended for
+		debugging use only, and should be 0 on production
+		systems.
+
+What:		/sys/fs/ext4/<disk>/max_writeback_mb_bump
+Date:		September 2009
+Contact:	"Theodore Ts'o" <tytso@mit.edu>
+Description:
+		The maximum number of megabytes the writeback code will
+		try to write out before move on to another inode.
+
+What:		/sys/fs/ext4/<disk>/extent_max_zeroout_kb
+Date:		August 2012
+Contact:	"Theodore Ts'o" <tytso@mit.edu>
+Description:
+		The maximum number of kilobytes which will be zeroed
+		out in preference to creating a new uninitialized
+		extent when manipulating an inode's extent tree.  Note
+		that using a larger value will increase the
+		variability of time necessary to complete a random
+		write operation (since a 4k random write might turn
+		into a much larger write due to the zeroout
+		operation).
+
+What:		/sys/fs/ext4/<disk>/journal_task
+Date:		February 2019
+Contact:	"Theodore Ts'o" <tytso@mit.edu>
+Description:
+		This file is read-only and shows the pid of journal thread in
+		current pid-namespace or 0 if task is unreachable.