Merge tag 'i3c/for-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linuxgrafted

Pull I3C updates from Alexandre Belloni:
 "A new driver this cycle, for the AMD AXI I3C controller.

  There are also new features such as IBI wakeup support, SETAASA device
  discovery and ACPI support for the the DAA methods, meaning we can now
  communicate with the SPD devices on DDR5 modules.

  New driver:
   - AMD AXI I3C master controller

  Subsystem:
   - I3C Common Command Code (CCC) handling improvements, especially
     around GET CCCs
   - SETAASA device discovery support
   - ACPI support for all existing DAA methods like SETDASA, SETNEWDA as
     well as I2C devices on I3C bus
   - IBI-based wakeup support

  Drivers:
   - dw: SETAASA support
   - mipi-i3c-hci: advertise IBI wakeup capability, AMD_PT I3C
     controller support, PIO queue management support for HCI v1.2
   - renesas: improve suspend to RAM support, add runtime PM support"

* tag 'i3c/for-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux: (70 commits)
  i3c: dw: reduce do_daa time if there's no client
  i3c: mipi-i3c-hci: Add support for AMD_PT I3C controller
  i3c: mipi-i3c-hci: Add PIO queue management support for HCI v1.2
  i3c: mipi-i3c-hci: Fix missing STAT_IBI_STATUS_THLD in PIO mode
  i3c: dw: rename "pclk" to "apb" to match dt-binding
  i3c: dw: make struct dw_i3c_cmd smaller
  i3c: dw: use COMMAND_PORT_TRANSFER_ARG instead of hardcoding
  i3c: renesas: Don't register devices when ENTDAA times out
  i3c: master: dw-i3c-master: fix OD timing for first broadcast
  i3c: mipi-i3c-hci: Advertise IBI wakeup capability
  i3c: mipi-i3c-hci: Factor out i3c_hci_sysdev()
  i3c: mipi-i3c-hci-pci: Propagate I3C wakeup requirements to PCI
  i3c: master: Reject IBI requests from non-IBI-capable devices
  i3c: master: Add helper to query bus wakeup requirements
  i3c: master: Report wakeup events for IBIs
  i3c: master: Support IBI-based wakeup capability
  i3c: master: Fix potential UAF in i3c_device_match()
  i3c: master: Fix potential UAF in i3c_device_uevent()
  i3c: Make dev->desc locking assumptions explicit
  i3c: master: Fix use-after-free of master->this
  ...

1 files changed, 137 insertions, 0 deletions

diff --git a/Documentation/ABI/testing/sysfs-class-rc b/Documentation/ABI/testing/sysfs-class-rc
new file mode 100644
index 000000000..84e46d70d
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-class-rc
@@ -0,0 +1,137 @@
+What:		/sys/class/rc/
+Date:		Apr 2010
+KernelVersion:	2.6.35
+Contact:	Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
+Description:
+		The rc/ class sub-directory belongs to the Remote Controller
+		core and provides a sysfs interface for configuring infrared
+		remote controller receivers.
+
+What:		/sys/class/rc/rc<N>/
+Date:		Apr 2010
+KernelVersion:	2.6.35
+Contact:	Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
+Description:
+		A /sys/class/rc/rcN directory is created for each remote
+		control receiver device where N is the number of the receiver.
+
+What:		/sys/class/rc/rc<N>/protocols
+Date:		Jun 2010
+KernelVersion:	2.6.36
+Contact:	Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
+Description:
+		Reading this file returns a list of available protocols,
+		something like::
+
+		    "rc5 [rc6] nec jvc [sony]"
+
+		Enabled protocols are shown in [] brackets.
+
+		Writing "+proto" will add a protocol to the list of enabled
+		protocols.
+
+		Writing "-proto" will remove a protocol from the list of enabled
+		protocols.
+
+		Writing "proto" will enable only "proto".
+
+		Writing "none" will disable all protocols.
+
+		Write fails with EINVAL if an invalid protocol combination or
+		unknown protocol name is used.
+
+What:		/sys/class/rc/rc<N>/filter
+Date:		Jan 2014
+KernelVersion:	3.15
+Contact:	Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
+Description:
+		Sets the scancode filter expected value.
+
+		Use in combination with /sys/class/rc/rcN/filter_mask to set the
+		expected value of the bits set in the filter mask.
+		If the hardware supports it then scancodes which do not match
+		the filter will be ignored. Otherwise the write will fail with
+		an error.
+
+		This value may be reset to 0 if the current protocol is altered.
+
+What:		/sys/class/rc/rc<N>/filter_mask
+Date:		Jan 2014
+KernelVersion:	3.15
+Contact:	Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
+Description:
+		Sets the scancode filter mask of bits to compare.
+		Use in combination with /sys/class/rc/rcN/filter to set the bits
+		of the scancode which should be compared against the expected
+		value. A value of 0 disables the filter to allow all valid
+		scancodes to be processed.
+
+		If the hardware supports it then scancodes which do not match
+		the filter will be ignored. Otherwise the write will fail with
+		an error.
+
+		This value may be reset to 0 if the current protocol is altered.
+
+What:		/sys/class/rc/rc<N>/wakeup_protocols
+Date:		Feb 2017
+KernelVersion:	4.11
+Contact:	Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
+Description:
+		Reading this file returns a list of available protocols to use
+		for the wakeup filter, something like::
+
+		    "rc-5 nec nec-x rc-6-0 rc-6-6a-24 [rc-6-6a-32] rc-6-mce"
+
+		Note that protocol variants are listed, so "nec", "sony",
+		"rc-5", "rc-6" have their different bit length encodings
+		listed if available.
+
+		The enabled wakeup protocol is shown in [] brackets.
+
+		Only one protocol can be selected at a time.
+
+		Writing "proto" will use "proto" for wakeup events.
+
+		Writing "none" will disable wakeup.
+
+		Write fails with EINVAL if an invalid protocol combination or
+		unknown protocol name is used, or if wakeup is not supported by
+		the hardware.
+
+What:		/sys/class/rc/rc<N>/wakeup_filter
+Date:		Jan 2014
+KernelVersion:	3.15
+Contact:	Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
+Description:
+		Sets the scancode wakeup filter expected value.
+
+		Use in combination with /sys/class/rc/rcN/wakeup_filter_mask to
+		set the expected value of the bits set in the wakeup filter mask
+		to trigger a system wake event.
+
+		If the hardware supports it and wakeup_filter_mask is not 0 then
+		scancodes which match the filter will wake the system from e.g.
+		suspend to RAM or power off.
+
+		Otherwise the write will fail with an error.
+
+		This value may be reset to 0 if the wakeup protocol is altered.
+
+What:		/sys/class/rc/rc<N>/wakeup_filter_mask
+Date:		Jan 2014
+KernelVersion:	3.15
+Contact:	Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
+Description:
+		Sets the scancode wakeup filter mask of bits to compare.
+
+		Use in combination with /sys/class/rc/rcN/wakeup_filter to set
+		the bits of the scancode which should be compared against the
+		expected value to trigger a system wake event.
+
+		If the hardware supports it and wakeup_filter_mask is not 0 then
+		scancodes which match the filter will wake the system from e.g.
+		suspend to RAM or power off.
+
+		Otherwise the write will fail with an error.
+
+		This value may be reset to 0 if the wakeup protocol is altered.