Merge tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrlgrafted

Pull pin control updates from Linus Walleij:
 "Core changes:

   - Use the non-blocking mux_state_try_select() in the generic MUX pin
     control back-end

   - Free pin maps on pinctrl_generic_to_map() failure in the core
     helpers

  New hardware pin control:

   - Qualcomm Maili TLMM SoC, PMG1110 PMIC, and Eliza LPASS LPI TLMM SoC
     (this is for the low power audio, LPASS = Low Power Audio SubSystem
     portions)

   - Upboard support on top of the Intel pin controller

   - Apple T6030 and T6031 support (just compatible strings)

   - Samsung Exynos 8855 SoC

   - Mediatek MT6858 SoC

   - Rockchip RK3308B and RV1106 SoCs

   - Airoha EN7523 and AN7563 SoCs

  Improvements:

   - Qualcomm TLMM GPIOs are unconditionally marked as wakeup capable

   - Qualcomm improvements on top of the Qualcomm PDC (power domain
     controller) irqchip improvements from tglx:s tree

   - Qualcomm IPQ806x and IPQ9650 non-urgent pin grop fixups

   - The NPCM8xx driver has been put into shape fixing many pin and
     group definitions

   - Some non-urgent Tegra 264 pin assignments are fixed up

   - Some non-urgent fixups to Airoha AN7581 and AN7583 registers and
     pin assignments, missing features etc"

* tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (130 commits)
  dt-bindings: pinctrl: Convert TI DA850 pupd to DT schema
  pinctrl: meson: sync some modify from A4
  pinctrl: meson: a4: Add input enable pin configuration
  pinctrl: realtek: rtd1625: remove unused group name spdif_sel
  pinctrl: realtek: rtd1625: fix base_bit for VE4 GPIO 13
  dt-bindings: pinctrl: microchip,pic32mzda-pinctrl: Convert to DT schema
  Revert "Merge branch 'ib-rsk7204' into devel"
  pinctrl: rockchip: Add RV1106 pinctrl support
  dt-bindings: pinctrl: rockchip: Add RV1106 compatible
  pinctrl: rockchip: Decode drive strength in the get function
  pinctrl: fix PINCTRL_GENERIC_MUX not always being selectable
  pinctrl: airoha: add support of an7563 SoC
  dt-bindings: pinctrl: airoha: add support of an7563 pin controller
  pinctrl: airoha: try to find chip scu node by phandle first
  pinctrl: airoha: add support of en7523 SoC
  dt-bindings: pinctrl: airoha: add support of en7523 pin controller
  pinctrl: airoha: an7583: add support for olt pinmux
  pinctrl: airoha: an7583: add support for pon_alt pinmux
  pinctrl: airoha: an7583: add support for npu_uart pinmux
  dt-bindings: pinctrl: airoha: an7583: add missed features
  ...

1 files changed, 152 insertions, 0 deletions

diff --git a/Documentation/ABI/testing/sysfs-class-powercap b/Documentation/ABI/testing/sysfs-class-powercap
new file mode 100644
index 000000000..ca491ec4e
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-class-powercap
@@ -0,0 +1,152 @@
+What:		/sys/class/powercap/
+Date:		September 2013
+KernelVersion:	3.13
+Contact:	linux-pm@vger.kernel.org
+Description:
+		The powercap/ class sub directory belongs to the power cap
+		subsystem. Refer to
+		Documentation/power/powercap/powercap.rst for details.
+
+What:		/sys/class/powercap/<control type>
+Date:		September 2013
+KernelVersion:	3.13
+Contact:	linux-pm@vger.kernel.org
+Description:
+		A <control type> is a unique name under /sys/class/powercap.
+		Here <control type> determines how the power is going to be
+		controlled. A <control type> can contain multiple power zones.
+
+What:		/sys/class/powercap/<control type>/enabled
+Date:		September 2013
+KernelVersion:	3.13
+Contact:	linux-pm@vger.kernel.org
+Description:
+		This allows to enable/disable power capping for a "control type".
+		This status affects every power zone using this "control_type.
+
+What:		/sys/class/powercap/<control type>/<power zone>
+Date:		September 2013
+KernelVersion:	3.13
+Contact:	linux-pm@vger.kernel.org
+Description:
+		A power zone is a single or a collection of devices, which can
+		be independently monitored and controlled. A power zone sysfs
+		entry is qualified with the name of the <control type>.
+		E.g. intel-rapl:0:1:1.
+
+What:		/sys/class/powercap/<control type>/<power zone>/<child power zone>
+Date:		September 2013
+KernelVersion:	3.13
+Contact:	linux-pm@vger.kernel.org
+Description:
+		Power zones may be organized in a hierarchy in which child
+		power zones provide monitoring and control for a subset of
+		devices under the parent. For example, if there is a parent
+		power zone for a whole CPU package, each CPU core in it can
+		be a child power zone.
+
+What:		/sys/class/powercap/.../<power zone>/name
+Date:		September 2013
+KernelVersion:	3.13
+Contact:	linux-pm@vger.kernel.org
+Description:
+		Specifies the name of this power zone.
+
+What:		/sys/class/powercap/.../<power zone>/energy_uj
+Date:		September 2013
+KernelVersion:	3.13
+Contact:	linux-pm@vger.kernel.org
+Description:
+		Current energy counter in micro-joules. Write "0" to reset.
+		If the counter can not be reset, then this attribute is
+		read-only.
+
+What:		/sys/class/powercap/.../<power zone>/max_energy_range_uj
+Date:		September 2013
+KernelVersion:	3.13
+Contact:	linux-pm@vger.kernel.org
+Description:
+		Range of the above energy counter in micro-joules.
+
+
+What:		/sys/class/powercap/.../<power zone>/power_uw
+Date:		September 2013
+KernelVersion:	3.13
+Contact:	linux-pm@vger.kernel.org
+Description:
+		Current power in micro-watts.
+
+What:		/sys/class/powercap/.../<power zone>/max_power_range_uw
+Date:		September 2013
+KernelVersion:	3.13
+Contact:	linux-pm@vger.kernel.org
+Description:
+		Range of the above power value in micro-watts.
+
+What:		/sys/class/powercap/.../<power zone>/constraint_X_name
+Date:		September 2013
+KernelVersion:	3.13
+Contact:	linux-pm@vger.kernel.org
+Description:
+		Each power zone can define one or more constraints. Each
+		constraint can have an optional name. Here "X" can have values
+		from 0 to max integer.
+
+What:		/sys/class/powercap/.../<power zone>/constraint_X_power_limit_uw
+Date:		September 2013
+KernelVersion:	3.13
+Contact:	linux-pm@vger.kernel.org
+Description:
+		Power limit in micro-watts should be applicable for
+		the time window specified by "constraint_X_time_window_us".
+		Here "X" can have values from 0 to max integer.
+
+What:		/sys/class/powercap/.../<power zone>/constraint_X_time_window_us
+Date:		September 2013
+KernelVersion:	3.13
+Contact:	linux-pm@vger.kernel.org
+Description:
+		Time window in micro seconds. This is used along with
+		constraint_X_power_limit_uw to define a power constraint.
+		Here "X" can have values from 0 to max integer.
+
+
+What:		/sys/class/powercap/<control type>/.../constraint_X_max_power_uw
+Date:		September 2013
+KernelVersion:	3.13
+Contact:	linux-pm@vger.kernel.org
+Description:
+		Maximum allowed power in micro watts for this constraint.
+		Here "X" can have values from 0 to max integer.
+
+What:		/sys/class/powercap/<control type>/.../constraint_X_min_power_uw
+Date:		September 2013
+KernelVersion:	3.13
+Contact:	linux-pm@vger.kernel.org
+Description:
+		Minimum allowed power in micro watts for this constraint.
+		Here "X" can have values from 0 to max integer.
+
+What:		/sys/class/powercap/.../<power zone>/constraint_X_max_time_window_us
+Date:		September 2013
+KernelVersion:	3.13
+Contact:	linux-pm@vger.kernel.org
+Description:
+		Maximum allowed time window in micro seconds for this
+		constraint. Here "X" can have values from 0 to max integer.
+
+What:		/sys/class/powercap/.../<power zone>/constraint_X_min_time_window_us
+Date:		September 2013
+KernelVersion:	3.13
+Contact:	linux-pm@vger.kernel.org
+Description:
+		Minimum allowed time window in micro seconds for this
+		constraint. Here "X" can have values from 0 to max integer.
+
+What:		/sys/class/powercap/.../<power zone>/enabled
+Date:		September 2013
+KernelVersion:	3.13
+Contact:	linux-pm@vger.kernel.org
+Description:
+		This allows to enable/disable power capping at power zone level.
+		This applies to current power zone and its children.