KVM: SEV: Do cache maintenance on the source VM during intra-host migrationgrafted

Manually perform cache maintenance on the source VM during intra-host
migration to ensure no stale data is left in CPU caches after the VM is
destroyed.  Because the source VM is "converted" to a non-SEV VM, KVM's
memory reclaim flows won't trigger cache maintenance, e.g. when all guest
memory is reclaimed in response to detaching from the mmu_notifier.

Note, relying on the destination VM to do cache maintenance isn't an option
as KVM doesn't require identical guest memory configurations, i.e. the
source VM may have access to memory that the destination VM does not.
Enforcing equivalent memory configurations is infeasible, as it would
require a *deep* comparison of memslots, e.g. to verify that not only are
the memslot identical, but what the memslots point at is also identical.

Fixes: b56639318bb2 ("KVM: SEV: Add support for SEV intra host migration")
Cc: stable@vger.kernel.org
Reported-by: Stefan Teodorescu <fane@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20260923163721.1584779-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

1 files changed, 75 insertions, 0 deletions

diff --git a/Documentation/ABI/testing/sysfs-class-net-phydev b/Documentation/ABI/testing/sysfs-class-net-phydev
new file mode 100644
index 000000000..31615c59b
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-class-net-phydev
@@ -0,0 +1,75 @@
+What:		/sys/class/mdio_bus/<bus>/<device>/attached_dev
+Date:		May 2017
+KernelVersion:	4.13
+Contact:	netdev@vger.kernel.org
+Description:
+		Symbolic link to the network device this PHY device is
+		attached to.
+
+What:		/sys/class/mdio_bus/<bus>/<device>/phy_has_fixups
+Date:		February 2014
+KernelVersion:	3.15
+Contact:	netdev@vger.kernel.org
+Description:
+		This attribute contains the boolean value whether a given PHY
+		device has had any "fixup" workaround running on it, encoded as
+		a boolean. This information is provided to help troubleshooting
+		PHY configurations.
+
+What:		/sys/class/mdio_bus/<bus>/<device>/phy_id
+Date:		November 2012
+KernelVersion:	3.8
+Contact:	netdev@vger.kernel.org
+Description:
+		This attribute contains the 32-bit PHY Identifier as reported
+		by the device during bus enumeration, encoded in hexadecimal.
+		This ID is used to match the device with the appropriate
+		driver.
+
+What:		/sys/class/mdio_bus/<bus>/<device>/c45_phy_ids/mmd<n>_device_id
+Date:		June 2025
+KernelVersion:	6.17
+Contact:	netdev@vger.kernel.org
+Description:
+		This attribute contains the 32-bit PHY Identifier as reported
+		by the device during bus enumeration, encoded in hexadecimal.
+		These C45 IDs are used to match the device with the appropriate
+		driver. These files are invisible to the C22 device.
+
+What:		/sys/class/mdio_bus/<bus>/<device>/phy_interface
+Date:		February 2014
+KernelVersion:	3.15
+Contact:	netdev@vger.kernel.org
+Description:
+		This attribute contains the PHY interface as configured by the
+		Ethernet driver during bus enumeration, encoded in string.
+		This interface mode is used to configure the Ethernet MAC with the
+		appropriate mode for its data lines to the PHY hardware.
+
+		Possible values are:
+
+		<empty> (not available), mii, gmii, sgmii, tbi, rev-mii,
+		rmii, rgmii, rgmii-id, rgmii-rxid, rgmii-txid, rtbi, smii
+		xgmii, moca, qsgmii, trgmii, 1000base-x, 2500base-x, rxaui,
+		xaui, 10gbase-kr, unknown
+
+What:		/sys/class/mdio_bus/<bus>/<device>/phy_standalone
+Date:		May 2019
+KernelVersion:	5.3
+Contact:	netdev@vger.kernel.org
+Description:
+		Boolean value indicating whether the PHY device is used in
+		standalone mode, without a net_device associated, by PHYLINK.
+		Attribute created only when this is the case.
+
+What:		/sys/class/mdio_bus/<bus>/<device>/phy_dev_flags
+Date:		March 2021
+KernelVersion:	5.13
+Contact:	netdev@vger.kernel.org
+Description:
+		32-bit hexadecimal number representing a bit mask of the
+		configuration bits passed from the consumer of the PHY
+		(Ethernet MAC, switch, etc.) to the PHY driver. The flags are
+		only used internally by the kernel and their placement are
+		not meant to be stable across kernel versions. This is intended
+		for facilitating the debugging of PHY drivers.