Merge tag 'media/v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-mediagrafted

Pull media updates from Mauro Carvalho Chehab:

 - v4l2-core: added ISP statistics support and per-block validation

 - v4l2-core: Allow unknown HDR10 white point and luminance

 - New camera sensors: Sony IMX678 and IMX471m, Himax HM1092 IR sensor

 - New codec: Milos: VPU v2.0 codec support

 - isp driver: gained support for Dreamchip RPPX1 ISP framework

 - vsp1 driver: gained support for RZ/T2H and RZ/N2H

 - Novalake driver: gained CVS support for new NVL hardware

 - dvb-core: fix feed leak on failed DMX_ADD_PID

 - several driver fixes, cleanups and minor improvements

* tag 'media/v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (308 commits)
  media: ipu-bridge: check all DMI entries when overriding sensor rotation
  media: v4l2-async: avoid deleting unlinked ASC entry on link error
  media: rzg2l-cru: Align bytesperline to hardware DMA stride requirement
  media: intel/ipu6: fix async notifier cleanup leak on parse error
  media: staging/ipu7: fix async notifier UAF on probe error path
  media: amd: isp4: fix self-deadlock in isp4sd_pwron_and_init() error path
  media: amd: isp4: release partial allocations in isp4if_alloc_fw_gpumem()
  media: rcar-isp: Fix VSPX reference leaks
  media: rcar-isp: Release ISPCORE resources
  media: i2c: imx415: Release runtime PM reference on VBLANK error
  media: i2c: imx415: Return test pattern write errors
  media: renesas: vsp1: Declare index variables in for loop statement
  media: renesas: vsp1: Make reset control optional to support platforms without a reset line
  media: dt-bindings: media: renesas,vsp1: Document RZ/T2H and RZ/N2H SoCs
  media: dt-bindings: media: renesas,fcp: Document RZ/T2H and RZ/N2H SoCs
  media: nxp: imx8-isi: Add additional 32-bit RGB format support
  media: nxp: imx8-isi: Add 16-bit raw Bayer format support
  media: nxp: imx8-isi: Implement per-stream reference counting for multiplexed streams
  media: nxp: imx8-isi: Use BIT_ULL() for 64-bit stream masks
  media: nxp: imx8-isi: Correct color map between V4L2 and ISI
  ...

1 files changed, 178 insertions, 0 deletions

diff --git a/Documentation/ABI/testing/sysfs-class-mic b/Documentation/ABI/testing/sysfs-class-mic
new file mode 100644
index 000000000..5e5f36d10
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-class-mic
@@ -0,0 +1,178 @@
+What:		/sys/class/mic/
+Date:		October 2013
+KernelVersion:	3.13
+Contact:	Sudeep Dutt <sudeep.dutt@intel.com>
+Description:
+		The mic class directory belongs to Intel MIC devices and
+		provides information per MIC device. An Intel MIC device is a
+		PCIe form factor add-in Coprocessor card based on the Intel Many
+		Integrated Core (MIC) architecture that runs a Linux OS.
+
+What:		/sys/class/mic/mic<X>
+Date:		October 2013
+KernelVersion:	3.13
+Contact:	Sudeep Dutt <sudeep.dutt@intel.com>
+Description:
+		The directories /sys/class/mic/mic0, /sys/class/mic/mic1 etc.,
+		represent MIC devices (0,1,..etc). Each directory has
+		information specific to that MIC device.
+
+What:		/sys/class/mic/mic<X>/family
+Date:		October 2013
+KernelVersion:	3.13
+Contact:	Sudeep Dutt <sudeep.dutt@intel.com>
+Description:
+		Provides information about the Coprocessor family for an Intel
+		MIC device. For example - "x100"
+
+What:		/sys/class/mic/mic<X>/stepping
+Date:		October 2013
+KernelVersion:	3.13
+Contact:	Sudeep Dutt <sudeep.dutt@intel.com>
+Description:
+		Provides information about the silicon stepping for an Intel
+		MIC device. For example - "A0" or "B0"
+
+What:		/sys/class/mic/mic<X>/state
+Date:		October 2013
+KernelVersion:	3.13
+Contact:	Sudeep Dutt <sudeep.dutt@intel.com>
+Description:
+		When read, this entry provides the current state of an Intel
+		MIC device in the context of the card OS. Possible values that
+		will be read are:
+
+
+		===============  ===============================================
+		"ready"		 The MIC device is ready to boot the card OS.
+				 On reading this entry after an OSPM resume,
+				 a "boot" has to be written to this entry if
+				 the card was previously shutdown during OSPM
+				 suspend.
+		"booting"	 The MIC device has initiated booting a card OS.
+		"online"	 The MIC device has completed boot and is online
+		"shutting_down"	 The card OS is shutting down.
+		"resetting"	 A reset has been initiated for the MIC device
+		"reset_failed"	 The MIC device has failed to reset.
+		===============  ===============================================
+
+		When written, this sysfs entry triggers different state change
+		operations depending upon the current state of the card OS.
+		Acceptable values are:
+
+
+		==========  ===================================================
+		"boot"      Boot the card OS image specified by the combination
+			    of firmware, ramdisk, cmdline and bootmode
+			    sysfs entries.
+		"reset"     Initiates device reset.
+		"shutdown"  Initiates card OS shutdown.
+		==========  ===================================================
+
+What:		/sys/class/mic/mic<X>/shutdown_status
+Date:		October 2013
+KernelVersion:	3.13
+Contact:	Sudeep Dutt <sudeep.dutt@intel.com>
+Description:
+		An Intel MIC device runs a Linux OS during its operation. This
+		OS can shutdown because of various reasons. When read, this
+		entry provides the status on why the card OS was shutdown.
+		Possible values are:
+
+		==========  ===================================================
+		"nop"       shutdown status is not applicable, when the card OS
+			    is "online"
+		"crashed"   Shutdown because of a HW or SW crash.
+		"halted"    Shutdown because of a halt command.
+		"poweroff"  Shutdown because of a poweroff command.
+		"restart"   Shutdown because of a restart command.
+		==========  ===================================================
+
+What:		/sys/class/mic/mic<X>/cmdline
+Date:		October 2013
+KernelVersion:	3.13
+Contact:	Sudeep Dutt <sudeep.dutt@intel.com>
+Description:
+		An Intel MIC device runs a Linux OS during its operation. Before
+		booting this card OS, it is possible to pass kernel command line
+		options to configure various features in it, similar to
+		self-bootable machines. When read, this entry provides
+		information about the current kernel command line options set to
+		boot the card OS. This entry can be written to change the
+		existing kernel command line options. Typically, the user would
+		want to read the current command line options, append new ones
+		or modify existing ones and then write the whole kernel command
+		line back to this entry.
+
+What:		/sys/class/mic/mic<X>/firmware
+Date:		October 2013
+KernelVersion:	3.13
+Contact:	Sudeep Dutt <sudeep.dutt@intel.com>
+Description:
+		When read, this sysfs entry provides the path name under
+		/lib/firmware/ where the firmware image to be booted on the
+		card can be found. The entry can be written to change the
+		firmware image location under /lib/firmware/.
+
+What:		/sys/class/mic/mic<X>/ramdisk
+Date:		October 2013
+KernelVersion:	3.13
+Contact:	Sudeep Dutt <sudeep.dutt@intel.com>
+Description:
+		When read, this sysfs entry provides the path name under
+		/lib/firmware/ where the ramdisk image to be used during card
+		OS boot can be found. The entry can be written to change
+		the ramdisk image location under /lib/firmware/.
+
+What:		/sys/class/mic/mic<X>/bootmode
+Date:		October 2013
+KernelVersion:	3.13
+Contact:	Sudeep Dutt <sudeep.dutt@intel.com>
+Description:
+		When read, this sysfs entry provides the current bootmode for
+		the card. This sysfs entry can be written with the following
+		valid strings:
+		a) linux - Boot a Linux image.
+		b) flash - Boot an image for flash updates.
+
+What:		/sys/class/mic/mic<X>/log_buf_addr
+Date:		October 2013
+KernelVersion:	3.13
+Contact:	Sudeep Dutt <sudeep.dutt@intel.com>
+Description:
+		An Intel MIC device runs a Linux OS during its operation. For
+		debugging purpose and early kernel boot messages, the user can
+		access the card OS log buffer via debugfs. When read, this entry
+		provides the kernel virtual address of the buffer where the card
+		OS log buffer can be read. This entry is written by the host
+		configuration daemon to set the log buffer address. The correct
+		log buffer address to be written can be found in the System.map
+		file of the card OS.
+
+What:		/sys/class/mic/mic<X>/log_buf_len
+Date:		October 2013
+KernelVersion:	3.13
+Contact:	Sudeep Dutt <sudeep.dutt@intel.com>
+Description:
+		An Intel MIC device runs a Linux OS during its operation. For
+		debugging purpose and early kernel boot messages, the user can
+		access the card OS log buffer via debugfs. When read, this entry
+		provides the kernel virtual address where the card OS log buffer
+		length can be read. This entry is written by host configuration
+		daemon to set the log buffer length address. The correct log
+		buffer length address to be written can be found in the
+		System.map file of the card OS.
+
+What:		/sys/class/mic/mic<X>/heartbeat_enable
+Date:		March 2015
+KernelVersion:	4.4
+Contact:	Ashutosh Dixit <ashutosh.dixit@intel.com>
+Description:
+		The MIC drivers detect and inform user space about card crashes
+		via a heartbeat mechanism (see the description of
+		shutdown_status above). User space can turn off this
+		notification by setting heartbeat_enable to 0 and enable it by
+		setting this entry to 1. If this notification is disabled it is
+		the responsibility of user space to detect card crashes via
+		alternative means such as a network ping. This setting is
+		enabled by default.