Merge tag 'rust-i2c-for-7.3' into i2c/i2cgrafted

i2c: rust: mark I2cAdapter methods as inline

A single cleanup for the Rust I2C abstractions, targeting 7.3.

`I2cAdapter::get`, `inc_ref`, and `dec_ref` are trivial wrappers around
`i2c_get_adapter`/`i2c_put_adapter` and were showing up as their own
symbols in the build. Mark them `#[inline]` so they get folded into
their callers instead.

Signed-off-by: Igor Korotin <igor.korotin@linux.dev>

* tag 'rust-i2c-for-7.3':
  i2c: rust: mark I2cAdapter methods as inline

1 files changed, 89 insertions, 0 deletions

diff --git a/Documentation/ABI/testing/sysfs-class-led b/Documentation/ABI/testing/sysfs-class-led
new file mode 100644
index 000000000..d4c918cc1
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-class-led
@@ -0,0 +1,89 @@
+What:		/sys/class/leds/<led>/brightness
+Date:		March 2006
+KernelVersion:	2.6.17
+Contact:	Richard Purdie <rpurdie@rpsys.net>
+Description:
+		Set the brightness of the LED.
+
+		Most LEDs don't have hardware brightness support, so will
+		just be turned on for non-zero brightness settings.
+
+		.. Note::
+
+		  For multicolor LEDs, writing to this file will update all
+		  LEDs within the group to a calculated percentage of what
+		  each color LED intensity is set to.
+
+		  The percentage is calculated for each grouped LED via
+		  the equation below::
+
+		    led_brightness = brightness * multi_intensity/max_brightness
+
+		  For additional details please refer to
+		  Documentation/leds/leds-class-multicolor.rst.
+
+		The value is between 0 and /sys/class/leds/<led>/max_brightness
+		and is represented by as a decimal.
+
+		Writing 0 to this file clears active trigger.
+
+		Writing non-zero to this file while trigger is active changes the
+		top brightness trigger is going to use.
+
+
+
+What:		/sys/class/leds/<led>/max_brightness
+Date:		March 2006
+KernelVersion:	2.6.17
+Contact:	Richard Purdie <rpurdie@rpsys.net>
+Description:
+		Maximum brightness level for this LED, default is 255 (LED_FULL).
+
+		If the LED does not support different brightness levels, this
+		should be 1.
+
+What:		/sys/class/leds/<led>/brightness_hw_changed
+Date:		January 2017
+KernelVersion:	4.11
+Description:
+		Last hardware set brightness level for this LED. Some LEDs
+		may be changed autonomously by hardware/firmware. Only LEDs
+		where this happens and the driver can detect this, will have
+		this file.
+
+		This file supports poll() to detect when the hardware changes
+		the brightness.
+
+		Reading this file will return the last brightness level set
+		by the hardware, this may be different from the current
+		brightness. Reading this file when no hw brightness change
+		event has happened will return an ENODATA error.
+
+What:		/sys/class/leds/<led>/trigger
+Date:		March 2006
+KernelVersion:	2.6.17
+Contact:	Richard Purdie <rpurdie@rpsys.net>
+Description:
+		Set the trigger for this LED. A trigger is a kernel based source
+		of LED events.
+
+		You can change triggers in a similar manner to the way an IO
+		scheduler is chosen. Trigger specific parameters can appear in
+		/sys/class/leds/<led> once a given trigger is selected. For
+		their documentation see `sysfs-class-led-trigger-*`.
+
+		Writing "none" removes the trigger for this LED.
+
+		Writing "default" sets the trigger to the LED's default trigger
+		(which would often be configured in the device tree for the
+		hardware).
+
+What:		/sys/class/leds/<led>/inverted
+Date:		January 2011
+KernelVersion:	2.6.38
+Contact:	Richard Purdie <rpurdie@rpsys.net>
+Description:
+		Invert the LED on/off state. This parameter is specific to
+		gpio and backlight triggers. In case of the backlight trigger,
+		it is useful when driving a LED which is intended to indicate
+		a device in a standby like state.