KVM: SEV: Do cache maintenance on the source VM during intra-host migrationgrafted

Manually perform cache maintenance on the source VM during intra-host
migration to ensure no stale data is left in CPU caches after the VM is
destroyed.  Because the source VM is "converted" to a non-SEV VM, KVM's
memory reclaim flows won't trigger cache maintenance, e.g. when all guest
memory is reclaimed in response to detaching from the mmu_notifier.

Note, relying on the destination VM to do cache maintenance isn't an option
as KVM doesn't require identical guest memory configurations, i.e. the
source VM may have access to memory that the destination VM does not.
Enforcing equivalent memory configurations is infeasible, as it would
require a *deep* comparison of memslots, e.g. to verify that not only are
the memslot identical, but what the memslots point at is also identical.

Fixes: b56639318bb2 ("KVM: SEV: Add support for SEV intra host migration")
Cc: stable@vger.kernel.org
Reported-by: Stefan Teodorescu <fane@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20260923163721.1584779-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

1 files changed, 77 insertions, 0 deletions

diff --git a/Documentation/ABI/testing/sysfs-class-firmware b/Documentation/ABI/testing/sysfs-class-firmware
new file mode 100644
index 000000000..44ca1b78a
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-class-firmware
@@ -0,0 +1,77 @@
+What: 		/sys/class/firmware/.../data
+Date:		July 2022
+KernelVersion:	5.19
+Contact:	driver-core@lists.linux.dev
+Description:	The data sysfs file is used for firmware-fallback and for
+		firmware uploads. Cat a firmware image to this sysfs file
+		after you echo 1 to the loading sysfs file. When the firmware
+		image write is complete, echo 0 to the loading sysfs file. This
+		sequence will signal the completion of the firmware write and
+		signal the lower-level driver that the firmware data is
+		available.
+
+What: 		/sys/class/firmware/.../cancel
+Date:		July 2022
+KernelVersion:	5.19
+Contact:	driver-core@lists.linux.dev
+Description:	Write-only. For firmware uploads, write a "1" to this file to
+		request that the transfer of firmware data to the lower-level
+		device be canceled. This request will be rejected (EBUSY) if
+		the update cannot be canceled (e.g. a FLASH write is in
+		progress) or (ENODEV) if there is no firmware update in progress.
+
+What: 		/sys/class/firmware/.../error
+Date:		July 2022
+KernelVersion:	5.19
+Contact:	driver-core@lists.linux.dev
+Description:	Read-only. Returns a string describing a failed firmware
+		upload. This string will be in the form of <STATUS>:<ERROR>,
+		where <STATUS> will be one of the status strings described
+		for the status sysfs file and <ERROR> will be one of the
+		following: "hw-error", "timeout", "user-abort", "device-busy",
+		"invalid-file-size", "read-write-error", "flash-wearout". The
+		error sysfs file is only meaningful when the current firmware
+		upload status is "idle". If this file is read while a firmware
+		transfer is in progress, then the read will fail with EBUSY.
+
+What: 		/sys/class/firmware/.../loading
+Date:		July 2022
+KernelVersion:	5.19
+Contact:	driver-core@lists.linux.dev
+Description:	The loading sysfs file is used for both firmware-fallback and
+		for firmware uploads. Echo 1 onto the loading file to indicate
+		you are writing a firmware file to the data sysfs node. Echo
+		-1 onto this file to abort the data write or echo 0 onto this
+		file to indicate that the write is complete. For firmware
+		uploads, the zero value also triggers the transfer of the
+		firmware data to the lower-level device driver.
+
+What: 		/sys/class/firmware/.../remaining_size
+Date:		July 2022
+KernelVersion:	5.19
+Contact:	driver-core@lists.linux.dev
+Description:	Read-only. For firmware upload, this file contains the size
+		of the firmware data that remains to be transferred to the
+		lower-level device driver. The size value is initialized to
+		the full size of the firmware image that was previously
+		written to the data sysfs file. This value is periodically
+		updated during the "transferring" phase of the firmware
+		upload.
+		Format: "%u".
+
+What: 		/sys/class/firmware/.../status
+Date:		July 2022
+KernelVersion:	5.19
+Contact:	driver-core@lists.linux.dev
+Description:	Read-only. Returns a string describing the current status of
+		a firmware upload. The string will be one of the following:
+		idle, "receiving", "preparing", "transferring", "programming".
+
+What: 		/sys/class/firmware/.../timeout
+Date:		July 2022
+KernelVersion:	5.19
+Contact:	driver-core@lists.linux.dev
+Description:	This file supports the timeout mechanism for firmware
+		fallback.  This file has no affect on firmware uploads. For
+		more information on timeouts please see the documentation
+		for firmware fallback.