Merge tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrlgrafted

Pull pin control updates from Linus Walleij:
 "Core changes:

   - Use the non-blocking mux_state_try_select() in the generic MUX pin
     control back-end

   - Free pin maps on pinctrl_generic_to_map() failure in the core
     helpers

  New hardware pin control:

   - Qualcomm Maili TLMM SoC, PMG1110 PMIC, and Eliza LPASS LPI TLMM SoC
     (this is for the low power audio, LPASS = Low Power Audio SubSystem
     portions)

   - Upboard support on top of the Intel pin controller

   - Apple T6030 and T6031 support (just compatible strings)

   - Samsung Exynos 8855 SoC

   - Mediatek MT6858 SoC

   - Rockchip RK3308B and RV1106 SoCs

   - Airoha EN7523 and AN7563 SoCs

  Improvements:

   - Qualcomm TLMM GPIOs are unconditionally marked as wakeup capable

   - Qualcomm improvements on top of the Qualcomm PDC (power domain
     controller) irqchip improvements from tglx:s tree

   - Qualcomm IPQ806x and IPQ9650 non-urgent pin grop fixups

   - The NPCM8xx driver has been put into shape fixing many pin and
     group definitions

   - Some non-urgent Tegra 264 pin assignments are fixed up

   - Some non-urgent fixups to Airoha AN7581 and AN7583 registers and
     pin assignments, missing features etc"

* tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (130 commits)
  dt-bindings: pinctrl: Convert TI DA850 pupd to DT schema
  pinctrl: meson: sync some modify from A4
  pinctrl: meson: a4: Add input enable pin configuration
  pinctrl: realtek: rtd1625: remove unused group name spdif_sel
  pinctrl: realtek: rtd1625: fix base_bit for VE4 GPIO 13
  dt-bindings: pinctrl: microchip,pic32mzda-pinctrl: Convert to DT schema
  Revert "Merge branch 'ib-rsk7204' into devel"
  pinctrl: rockchip: Add RV1106 pinctrl support
  dt-bindings: pinctrl: rockchip: Add RV1106 compatible
  pinctrl: rockchip: Decode drive strength in the get function
  pinctrl: fix PINCTRL_GENERIC_MUX not always being selectable
  pinctrl: airoha: add support of an7563 SoC
  dt-bindings: pinctrl: airoha: add support of an7563 pin controller
  pinctrl: airoha: try to find chip scu node by phandle first
  pinctrl: airoha: add support of en7523 SoC
  dt-bindings: pinctrl: airoha: add support of en7523 pin controller
  pinctrl: airoha: an7583: add support for olt pinmux
  pinctrl: airoha: an7583: add support for pon_alt pinmux
  pinctrl: airoha: an7583: add support for npu_uart pinmux
  dt-bindings: pinctrl: airoha: an7583: add missed features
  ...

1 files changed, 101 insertions, 0 deletions

diff --git a/Documentation/ABI/testing/sysfs-class-extcon b/Documentation/ABI/testing/sysfs-class-extcon
new file mode 100644
index 000000000..f8e705375
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-class-extcon
@@ -0,0 +1,101 @@
+What:		/sys/class/extcon/.../
+Date:		February 2012
+Contact:	MyungJoo Ham <myungjoo.ham@samsung.com>
+Description:
+		Provide a place in sysfs for the extcon objects.
+		This allows accessing extcon specific variables.
+		The name of extcon object denoted as ... is the name given
+		with extcon_dev_register.
+
+		One extcon device denotes a single external connector
+		port. An external connector may have multiple cables
+		attached simultaneously. Many of docks, cradles, and
+		accessory cables have such capability. For example,
+		the 30-pin port of Nuri board (/arch/arm/mach-exynos)
+		may have both HDMI and Charger attached, or analog audio,
+		video, and USB cables attached simultaneously.
+
+		If there are cables mutually exclusive with each other,
+		such binary relations may be expressed with extcon_dev's
+		mutually_exclusive array.
+
+What:		/sys/class/extcon/.../name
+Date:		February 2012
+Contact:	MyungJoo Ham <myungjoo.ham@samsung.com>
+Description:
+		The /sys/class/extcon/.../name shows the name of the extcon
+		object. If the extcon object has an optional callback
+		"show_name" defined, the callback will provide the name with
+		this sysfs node.
+
+What:		/sys/class/extcon/.../state
+Date:		February 2012
+Contact:	MyungJoo Ham <myungjoo.ham@samsung.com>
+Description:
+		The /sys/class/extcon/.../state shows and stores the cable
+		attach/detach information of the corresponding extcon object.
+		If the extcon object has an optional callback "show_state"
+		defined, the showing function is overridden with the optional
+		callback.
+
+		If the default callback for showing function is used, the
+		format is like this::
+
+		    # cat state
+		    USB_OTG=1
+		    HDMI=0
+		    TA=1
+		    EAR_JACK=0
+		    #
+
+		In this example, the extcon device has USB_OTG and TA
+		cables attached and HDMI and EAR_JACK cables detached.
+
+		In order to update the state of an extcon device, enter a hex
+		state number starting with 0x::
+
+		    # echo 0xHEX > state
+
+		This updates the whole state of the extcon device.
+		Inputs of all the methods are required to meet the
+		mutually_exclusive conditions if they exist.
+
+		It is recommended to use this "global" state interface if
+		you need to set the value atomically. The later state
+		interface associated with each cable cannot update
+		multiple cable states of an extcon device simultaneously.
+
+What:		/sys/class/extcon/.../cable.X/name
+Date:		February 2012
+Contact:	MyungJoo Ham <myungjoo.ham@samsung.com>
+Description:
+		The /sys/class/extcon/.../cable.X/name shows the name of cable
+		"X" (integer between 0 and 31) of an extcon device.
+
+What:		/sys/class/extcon/.../cable.X/state
+Date:		February 2012
+Contact:	MyungJoo Ham <myungjoo.ham@samsung.com>
+Description:
+		The /sys/class/extcon/.../cable.X/state shows and stores the
+		state of cable "X" (integer between 0 and 31) of an extcon
+		device. The state value is either 0 (detached) or 1
+		(attached).
+
+What:		/sys/class/extcon/.../mutually_exclusive/...
+Date:		December 2011
+Contact:	MyungJoo Ham <myungjoo.ham@samsung.com>
+Description:
+		Shows the relations of mutually exclusiveness. For example,
+		if the mutually_exclusive array of extcon device is
+		{0x3, 0x5, 0xC, 0x0}, then the output is::
+
+		    # ls mutually_exclusive/
+		    0x3
+		    0x5
+		    0xc
+		    #
+
+		Note that mutually_exclusive is a sub-directory of the extcon
+		device and the file names under the mutually_exclusive
+		directory show the mutually-exclusive sets, not the contents
+		of the files.