Merge tag 'i3c/for-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linuxgrafted

Pull I3C updates from Alexandre Belloni:
 "A new driver this cycle, for the AMD AXI I3C controller.

  There are also new features such as IBI wakeup support, SETAASA device
  discovery and ACPI support for the the DAA methods, meaning we can now
  communicate with the SPD devices on DDR5 modules.

  New driver:
   - AMD AXI I3C master controller

  Subsystem:
   - I3C Common Command Code (CCC) handling improvements, especially
     around GET CCCs
   - SETAASA device discovery support
   - ACPI support for all existing DAA methods like SETDASA, SETNEWDA as
     well as I2C devices on I3C bus
   - IBI-based wakeup support

  Drivers:
   - dw: SETAASA support
   - mipi-i3c-hci: advertise IBI wakeup capability, AMD_PT I3C
     controller support, PIO queue management support for HCI v1.2
   - renesas: improve suspend to RAM support, add runtime PM support"

* tag 'i3c/for-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux: (70 commits)
  i3c: dw: reduce do_daa time if there's no client
  i3c: mipi-i3c-hci: Add support for AMD_PT I3C controller
  i3c: mipi-i3c-hci: Add PIO queue management support for HCI v1.2
  i3c: mipi-i3c-hci: Fix missing STAT_IBI_STATUS_THLD in PIO mode
  i3c: dw: rename "pclk" to "apb" to match dt-binding
  i3c: dw: make struct dw_i3c_cmd smaller
  i3c: dw: use COMMAND_PORT_TRANSFER_ARG instead of hardcoding
  i3c: renesas: Don't register devices when ENTDAA times out
  i3c: master: dw-i3c-master: fix OD timing for first broadcast
  i3c: mipi-i3c-hci: Advertise IBI wakeup capability
  i3c: mipi-i3c-hci: Factor out i3c_hci_sysdev()
  i3c: mipi-i3c-hci-pci: Propagate I3C wakeup requirements to PCI
  i3c: master: Reject IBI requests from non-IBI-capable devices
  i3c: master: Add helper to query bus wakeup requirements
  i3c: master: Report wakeup events for IBIs
  i3c: master: Support IBI-based wakeup capability
  i3c: master: Fix potential UAF in i3c_device_match()
  i3c: master: Fix potential UAF in i3c_device_uevent()
  i3c: Make dev->desc locking assumptions explicit
  i3c: master: Fix use-after-free of master->this
  ...

1 files changed, 143 insertions, 0 deletions

diff --git a/Documentation/ABI/testing/sysfs-class-devfreq b/Documentation/ABI/testing/sysfs-class-devfreq
new file mode 100644
index 000000000..df8ba88b9
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-class-devfreq
@@ -0,0 +1,143 @@
+What:		/sys/class/devfreq/.../
+Date:		September 2011
+Contact:	MyungJoo Ham <myungjoo.ham@samsung.com>
+Description:
+		Provide a place in sysfs for the devfreq objects.
+		This allows accessing various devfreq specific variables.
+		The name of devfreq object denoted as ... is same as the
+		name of device using devfreq.
+
+What:		/sys/class/devfreq/.../name
+Date:		November 2019
+Contact:	Chanwoo Choi <cw00.choi@samsung.com>
+Description:
+		The /sys/class/devfreq/.../name shows the name of device
+		of the corresponding devfreq object.
+
+What:		/sys/class/devfreq/.../governor
+Date:		September 2011
+Contact:	MyungJoo Ham <myungjoo.ham@samsung.com>
+Description:
+		The /sys/class/devfreq/.../governor show or set the name of the
+		governor used by the corresponding devfreq object.
+
+What:		/sys/class/devfreq/.../cur_freq
+Date:		September 2011
+Contact:	MyungJoo Ham <myungjoo.ham@samsung.com>
+Description:
+		The /sys/class/devfreq/.../cur_freq shows the current
+		frequency of the corresponding devfreq object. Same as
+		target_freq when get_cur_freq() is not implemented by
+		devfreq driver.
+
+What:		/sys/class/devfreq/.../target_freq
+Date:		September 2012
+Contact:	Rajagopal Venkat <rajagopal.venkat@linaro.org>
+Description:
+		The /sys/class/devfreq/.../target_freq shows the next governor
+		predicted target frequency of the corresponding devfreq object.
+
+What:		/sys/class/devfreq/.../trans_stat
+Date:		October 2012
+Contact:	MyungJoo Ham <myungjoo.ham@samsung.com>
+Description:
+		This ABI shows or clears the statistics of devfreq behavior
+		on a specific device. It shows the time spent in each state
+		and the number of transitions between states.
+		In order to activate this ABI, the devfreq target device
+		driver should provide the list of available frequencies
+		with its profile. If need to reset the statistics of devfreq
+		behavior on a specific device, enter 0(zero) to 'trans_stat'
+		as following::
+
+			echo 0 > /sys/class/devfreq/.../trans_stat
+
+		If the transition table is bigger than PAGE_SIZE, reading
+		this will return an -EFBIG error.
+
+What:		/sys/class/devfreq/.../available_frequencies
+Date:		October 2012
+Contact:	Nishanth Menon <nm@ti.com>
+Description:
+		The /sys/class/devfreq/.../available_frequencies shows
+		the available frequencies of the corresponding devfreq object.
+		This is a snapshot of available frequencies and not limited
+		by the min/max frequency restrictions.
+
+What:		/sys/class/devfreq/.../available_governors
+Date:		October 2012
+Contact:	Nishanth Menon <nm@ti.com>
+Description:
+		The /sys/class/devfreq/.../available_governors shows
+		currently available governors in the system.
+
+What:		/sys/class/devfreq/.../min_freq
+Date:		January 2013
+Contact:	MyungJoo Ham <myungjoo.ham@samsung.com>
+Description:
+		The /sys/class/devfreq/.../min_freq shows and stores
+		the minimum frequency requested by users. It is 0 if
+		the user does not care. min_freq overrides the
+		frequency requested by governors.
+
+What:		/sys/class/devfreq/.../max_freq
+Date:		January 2013
+Contact:	MyungJoo Ham <myungjoo.ham@samsung.com>
+Description:
+		The /sys/class/devfreq/.../max_freq shows and stores
+		the maximum frequency requested by users. It is 0 if
+		the user does not care. max_freq overrides the
+		frequency requested by governors and min_freq.
+		The max_freq overrides min_freq because max_freq may be
+		used to throttle devices to avoid overheating.
+
+What:		/sys/class/devfreq/.../polling_interval
+Date:		September 2011
+Contact:	MyungJoo Ham <myungjoo.ham@samsung.com>
+Description:
+		The /sys/class/devfreq/.../polling_interval shows and sets
+		the requested polling interval of the corresponding devfreq
+		object. The values are represented in ms. If the value is
+		less than 1 jiffy, it is considered to be 0, which means
+		no polling. This value is meaningless if the governor is
+		not polling.
+
+		A list of governors that support the node:
+		- simple_ondmenad
+		- tegra_actmon
+
+What:		/sys/class/devfreq/.../userspace/set_freq
+Date:		September 2011
+Contact:	MyungJoo Ham <myungjoo.ham@samsung.com>
+Description:
+		The /sys/class/devfreq/.../userspace/set_freq shows and
+		sets the requested frequency for the devfreq object if
+		userspace governor is in effect.
+
+		A list of governors that support the node:
+		- userspace
+
+What:		/sys/class/devfreq/.../timer
+Date:		July 2020
+Contact:	Chanwoo Choi <cw00.choi@samsung.com>
+Description:
+		This ABI shows and stores the kind of work timer by users.
+		This work timer is used by devfreq workqueue in order to
+		monitor the device status such as utilization. The user
+		can change the work timer on runtime according to their demand
+		as following::
+
+			echo deferrable > /sys/class/devfreq/.../timer
+			echo delayed > /sys/class/devfreq/.../timer
+
+		A list of governors that support the node:
+		- simple_ondemand
+
+What:		/sys/class/devfreq/.../related_cpus
+Date:		June 2025
+Contact:	Linux power management list <linux-pm@vger.kernel.org>
+Description:	The list of CPUs whose performance is closely related to the
+		frequency of this devfreq domain.
+
+		This file is only present if a specific devfreq device is
+		closely associated with a subset of CPUs.