selftests/ftrace: Fix unique symbol check in kprobe_non_uniq_symbol.tcgrafted

The current regex also matches symbols in modules, which makes the
test fail on s390 where name_show is present only once in the kernel,
but also multiple times in modules:

000001b1401cdc20 t name_show
000001b0c05e6c40 t name_show    [mdev]
000001b0c0495f30 t name_show    [i2c_core]

Fix this by changing the regular expression to only match the function
name.

Link: https://lore.kernel.org/all/20260909092954.2200558-1-svens@linux.ibm.com/

Fixes: 03b80ff8023a ("selftests/ftrace: Add new test case which checks non unique symbol")
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Reviewed-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>

1 files changed, 90 insertions, 0 deletions

diff --git a/Documentation/ABI/testing/sysfs-bus-siox b/Documentation/ABI/testing/sysfs-bus-siox
new file mode 100644
index 000000000..50e80238f
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-bus-siox
@@ -0,0 +1,90 @@
+What:		/sys/bus/siox/devices/siox-X/active
+KernelVersion:	4.16
+Contact:	Thorsten Scherer <t.scherer@eckelmann.de>, Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
+Description:
+		On reading represents the current state of the bus. If it
+		contains a "0" the bus is stopped and connected devices are
+		expected to not do anything because their watchdog triggered.
+		When the file contains a "1" the bus is operated and periodically
+		does a push-pull cycle to write and read data from the
+		connected devices.
+
+		When writing a "0" or "1" the bus moves to the described state.
+
+What:		/sys/bus/siox/devices/siox-X/device_add
+KernelVersion:	4.16
+Contact:	Thorsten Scherer <t.scherer@eckelmann.de>, Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
+Description:
+		Write-only file. Write
+
+			<type> <inbytes> <outbytes> <statustype>
+
+		to add a new device dynamically. <type> is the name that is used to match
+		to a driver (similar to the platform bus). <inbytes> and <outbytes> define
+		the length of the input and output shift register in bytes respectively.
+
+		<statustype> defines the 4 bit device type that is check to identify connection
+		problems.
+
+		The new device is added to the end of the existing chain.
+
+What:		/sys/bus/siox/devices/siox-X/device_remove
+KernelVersion:	4.16
+Contact:	Thorsten Scherer <t.scherer@eckelmann.de>, Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
+Description:
+		Write-only file. A single write removes the last device in the siox chain.
+
+What:		/sys/bus/siox/devices/siox-X/poll_interval_ns
+KernelVersion:	4.16
+Contact:	Thorsten Scherer <t.scherer@eckelmann.de>, Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
+Description:
+		Defines the interval between two poll cycles in nano seconds.
+		Note this is rounded to jiffies on writing. On reading the current value
+		is returned.
+
+What:		/sys/bus/siox/devices/siox-X-Y/connected
+KernelVersion:	4.16
+Contact:	Thorsten Scherer <t.scherer@eckelmann.de>, Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
+Description:
+		Read-only value. "0" means the Yth device on siox bus X isn't "connected" i.e.
+		communication with it is not ensured. "1" signals a working connection.
+
+What:		/sys/bus/siox/devices/siox-X-Y/inbytes
+KernelVersion:	4.16
+Contact:	Thorsten Scherer <t.scherer@eckelmann.de>, Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
+Description:
+		Read-only value reporting the inbytes value provided to siox-X/device_add
+
+What:		/sys/bus/siox/devices/siox-X-Y/status_errors
+KernelVersion:	4.16
+Contact:	Thorsten Scherer <t.scherer@eckelmann.de>, Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
+Description:
+		Counts the number of time intervals when the read status byte doesn't yield the
+		expected value.
+
+What:		/sys/bus/siox/devices/siox-X-Y/type
+KernelVersion:	4.16
+Contact:	Thorsten Scherer <t.scherer@eckelmann.de>, Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
+Description:
+		Read-only value reporting the type value provided to siox-X/device_add.
+
+What:		/sys/bus/siox/devices/siox-X-Y/watchdog
+KernelVersion:	4.16
+Contact:	Thorsten Scherer <t.scherer@eckelmann.de>, Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
+Description:
+		Read-only value reporting if the watchdog of the siox device is
+		active. "0" means the watchdog is not active and the device is expected to
+		be operational. "1" means the watchdog keeps the device in reset.
+
+What:		/sys/bus/siox/devices/siox-X-Y/watchdog_errors
+KernelVersion:	4.16
+Contact:	Thorsten Scherer <t.scherer@eckelmann.de>, Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
+Description:
+		Read-only value reporting the number to time intervals when the
+		watchdog was active.
+
+What:		/sys/bus/siox/devices/siox-X-Y/outbytes
+KernelVersion:	4.16
+Contact:	Thorsten Scherer <t.scherer@eckelmann.de>, Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
+Description:
+		Read-only value reporting the outbytes value provided to siox-X/device_add.