Merge tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrlgrafted

Pull pin control updates from Linus Walleij:
 "Core changes:

   - Use the non-blocking mux_state_try_select() in the generic MUX pin
     control back-end

   - Free pin maps on pinctrl_generic_to_map() failure in the core
     helpers

  New hardware pin control:

   - Qualcomm Maili TLMM SoC, PMG1110 PMIC, and Eliza LPASS LPI TLMM SoC
     (this is for the low power audio, LPASS = Low Power Audio SubSystem
     portions)

   - Upboard support on top of the Intel pin controller

   - Apple T6030 and T6031 support (just compatible strings)

   - Samsung Exynos 8855 SoC

   - Mediatek MT6858 SoC

   - Rockchip RK3308B and RV1106 SoCs

   - Airoha EN7523 and AN7563 SoCs

  Improvements:

   - Qualcomm TLMM GPIOs are unconditionally marked as wakeup capable

   - Qualcomm improvements on top of the Qualcomm PDC (power domain
     controller) irqchip improvements from tglx:s tree

   - Qualcomm IPQ806x and IPQ9650 non-urgent pin grop fixups

   - The NPCM8xx driver has been put into shape fixing many pin and
     group definitions

   - Some non-urgent Tegra 264 pin assignments are fixed up

   - Some non-urgent fixups to Airoha AN7581 and AN7583 registers and
     pin assignments, missing features etc"

* tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (130 commits)
  dt-bindings: pinctrl: Convert TI DA850 pupd to DT schema
  pinctrl: meson: sync some modify from A4
  pinctrl: meson: a4: Add input enable pin configuration
  pinctrl: realtek: rtd1625: remove unused group name spdif_sel
  pinctrl: realtek: rtd1625: fix base_bit for VE4 GPIO 13
  dt-bindings: pinctrl: microchip,pic32mzda-pinctrl: Convert to DT schema
  Revert "Merge branch 'ib-rsk7204' into devel"
  pinctrl: rockchip: Add RV1106 pinctrl support
  dt-bindings: pinctrl: rockchip: Add RV1106 compatible
  pinctrl: rockchip: Decode drive strength in the get function
  pinctrl: fix PINCTRL_GENERIC_MUX not always being selectable
  pinctrl: airoha: add support of an7563 SoC
  dt-bindings: pinctrl: airoha: add support of an7563 pin controller
  pinctrl: airoha: try to find chip scu node by phandle first
  pinctrl: airoha: add support of en7523 SoC
  dt-bindings: pinctrl: airoha: add support of en7523 pin controller
  pinctrl: airoha: an7583: add support for olt pinmux
  pinctrl: airoha: an7583: add support for pon_alt pinmux
  pinctrl: airoha: an7583: add support for npu_uart pinmux
  dt-bindings: pinctrl: airoha: an7583: add missed features
  ...

1 files changed, 90 insertions, 0 deletions

diff --git a/Documentation/ABI/testing/sysfs-bus-siox b/Documentation/ABI/testing/sysfs-bus-siox
new file mode 100644
index 000000000..50e80238f
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-bus-siox
@@ -0,0 +1,90 @@
+What:		/sys/bus/siox/devices/siox-X/active
+KernelVersion:	4.16
+Contact:	Thorsten Scherer <t.scherer@eckelmann.de>, Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
+Description:
+		On reading represents the current state of the bus. If it
+		contains a "0" the bus is stopped and connected devices are
+		expected to not do anything because their watchdog triggered.
+		When the file contains a "1" the bus is operated and periodically
+		does a push-pull cycle to write and read data from the
+		connected devices.
+
+		When writing a "0" or "1" the bus moves to the described state.
+
+What:		/sys/bus/siox/devices/siox-X/device_add
+KernelVersion:	4.16
+Contact:	Thorsten Scherer <t.scherer@eckelmann.de>, Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
+Description:
+		Write-only file. Write
+
+			<type> <inbytes> <outbytes> <statustype>
+
+		to add a new device dynamically. <type> is the name that is used to match
+		to a driver (similar to the platform bus). <inbytes> and <outbytes> define
+		the length of the input and output shift register in bytes respectively.
+
+		<statustype> defines the 4 bit device type that is check to identify connection
+		problems.
+
+		The new device is added to the end of the existing chain.
+
+What:		/sys/bus/siox/devices/siox-X/device_remove
+KernelVersion:	4.16
+Contact:	Thorsten Scherer <t.scherer@eckelmann.de>, Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
+Description:
+		Write-only file. A single write removes the last device in the siox chain.
+
+What:		/sys/bus/siox/devices/siox-X/poll_interval_ns
+KernelVersion:	4.16
+Contact:	Thorsten Scherer <t.scherer@eckelmann.de>, Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
+Description:
+		Defines the interval between two poll cycles in nano seconds.
+		Note this is rounded to jiffies on writing. On reading the current value
+		is returned.
+
+What:		/sys/bus/siox/devices/siox-X-Y/connected
+KernelVersion:	4.16
+Contact:	Thorsten Scherer <t.scherer@eckelmann.de>, Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
+Description:
+		Read-only value. "0" means the Yth device on siox bus X isn't "connected" i.e.
+		communication with it is not ensured. "1" signals a working connection.
+
+What:		/sys/bus/siox/devices/siox-X-Y/inbytes
+KernelVersion:	4.16
+Contact:	Thorsten Scherer <t.scherer@eckelmann.de>, Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
+Description:
+		Read-only value reporting the inbytes value provided to siox-X/device_add
+
+What:		/sys/bus/siox/devices/siox-X-Y/status_errors
+KernelVersion:	4.16
+Contact:	Thorsten Scherer <t.scherer@eckelmann.de>, Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
+Description:
+		Counts the number of time intervals when the read status byte doesn't yield the
+		expected value.
+
+What:		/sys/bus/siox/devices/siox-X-Y/type
+KernelVersion:	4.16
+Contact:	Thorsten Scherer <t.scherer@eckelmann.de>, Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
+Description:
+		Read-only value reporting the type value provided to siox-X/device_add.
+
+What:		/sys/bus/siox/devices/siox-X-Y/watchdog
+KernelVersion:	4.16
+Contact:	Thorsten Scherer <t.scherer@eckelmann.de>, Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
+Description:
+		Read-only value reporting if the watchdog of the siox device is
+		active. "0" means the watchdog is not active and the device is expected to
+		be operational. "1" means the watchdog keeps the device in reset.
+
+What:		/sys/bus/siox/devices/siox-X-Y/watchdog_errors
+KernelVersion:	4.16
+Contact:	Thorsten Scherer <t.scherer@eckelmann.de>, Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
+Description:
+		Read-only value reporting the number to time intervals when the
+		watchdog was active.
+
+What:		/sys/bus/siox/devices/siox-X-Y/outbytes
+KernelVersion:	4.16
+Contact:	Thorsten Scherer <t.scherer@eckelmann.de>, Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
+Description:
+		Read-only value reporting the outbytes value provided to siox-X/device_add.