openrisc: fix arbitrary kernel memory access via or1k_atomic syscallgrafted

sys_or1k_atomic() (syscall 244 in the "or1k" ABI) takes two user
pointers, v1 and v2, and swaps the words they point to in hand-written
assembly.

    l.lwz   r29,0(r4)
    l.lwz   r27,0(r5)
    l.sw    0(r4),r27
    l.sw    0(r5),r29

The pointers are not checked with access_ok(). The four memory
accesses also have no exception table entries.

A caller passes a kernel address as either pointer, and the syscall
reads from and writes to it directly.

This gives an unprivileged process a kernel read/write primitive. It
overwrites kernel data such as the sys_call_table, gaining code
execution in kernel context.

Check both pointers before entering the critical section. Add fixups
for the four memory accesses so faults on valid but unmapped user
addresses return -EFAULT.

[shorne@gmail.com: fix comment style]
Fixes: 9d02a4283e9c ("OpenRISC: Boot code")
Cc: stable@vger.kernel.org
Signed-off-by: Ali Ahmet Memis <ali@iusegentoo.com>
Signed-off-by: Stafford Horne <shorne@gmail.com>

1 files changed, 95 insertions, 0 deletions

diff --git a/Documentation/ABI/testing/sysfs-bus-rpmsg b/Documentation/ABI/testing/sysfs-bus-rpmsg
new file mode 100644
index 000000000..990fcc420
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-bus-rpmsg
@@ -0,0 +1,95 @@
+What:		/sys/bus/rpmsg/devices/.../name
+Date:		June 2011
+KernelVersion:	3.3
+Contact:	Ohad Ben-Cohen <ohad@wizery.com>
+Description:
+		Every rpmsg device is a communication channel with a remote
+		processor. Channels are identified with a (textual) name,
+		which is maximum 32 bytes long (defined as RPMSG_NAME_SIZE in
+		rpmsg.h).
+
+		This sysfs entry contains the name of this channel.
+
+What:		/sys/bus/rpmsg/devices/.../src
+Date:		June 2011
+KernelVersion:	3.3
+Contact:	Ohad Ben-Cohen <ohad@wizery.com>
+Description:
+		Every rpmsg device is a communication channel with a remote
+		processor. Channels have a local ("source") rpmsg address,
+		and remote ("destination") rpmsg address. When an entity
+		starts listening on one end of a channel, it assigns it with
+		a unique rpmsg address (a 32 bits integer). This way when
+		inbound messages arrive to this address, the rpmsg core
+		dispatches them to the listening entity (a kernel driver).
+
+		This sysfs entry contains the src (local) rpmsg address
+		of this channel. If it contains 0xffffffff, then an address
+		wasn't assigned (can happen if no driver exists for this
+		channel).
+
+What:		/sys/bus/rpmsg/devices/.../dst
+Date:		June 2011
+KernelVersion:	3.3
+Contact:	Ohad Ben-Cohen <ohad@wizery.com>
+Description:
+		Every rpmsg device is a communication channel with a remote
+		processor. Channels have a local ("source") rpmsg address,
+		and remote ("destination") rpmsg address. When an entity
+		starts listening on one end of a channel, it assigns it with
+		a unique rpmsg address (a 32 bits integer). This way when
+		inbound messages arrive to this address, the rpmsg core
+		dispatches them to the listening entity.
+
+		This sysfs entry contains the dst (remote) rpmsg address
+		of this channel. If it contains 0xffffffff, then an address
+		wasn't assigned (can happen if the kernel driver that
+		is attached to this channel is exposing a service to the
+		remote processor. This make it a local rpmsg server,
+		and it is listening for inbound messages that may be sent
+		from any remote rpmsg client; it is not bound to a single
+		remote entity).
+
+What:		/sys/bus/rpmsg/devices/.../announce
+Date:		June 2011
+KernelVersion:	3.3
+Contact:	Ohad Ben-Cohen <ohad@wizery.com>
+Description:
+		Every rpmsg device is a communication channel with a remote
+		processor. Channels are identified by a textual name (see
+		/sys/bus/rpmsg/devices/.../name above) and have a local
+		("source") rpmsg address, and remote ("destination") rpmsg
+		address.
+
+		A channel is first created when an entity, whether local
+		or remote, starts listening on it for messages (and is thus
+		called an rpmsg server).
+
+		When that happens, a "name service" announcement is sent
+		to the other processor, in order to let it know about the
+		creation of the channel (this way remote clients know they
+		can start sending messages).
+
+		This sysfs entry tells us whether the channel is a local
+		server channel that is announced (values are either
+		true or false).
+
+What:		/sys/bus/rpmsg/devices/.../driver_override
+Date:		April 2018
+KernelVersion:	4.18
+Contact:	Bjorn Andersson <bjorn.andersson@linaro.org>
+Description:
+		Every rpmsg device is a communication channel with a remote
+		processor. Channels are identified by a textual name (see
+		/sys/bus/rpmsg/devices/.../name above) and have a local
+		("source") rpmsg address, and remote ("destination") rpmsg
+		address.
+
+		The listening entity (or client) which communicates with a
+		remote processor is referred as rpmsg driver. The rpmsg device
+		and rpmsg driver are matched based on rpmsg device name and
+		rpmsg driver ID table.
+
+		This sysfs entry allows the rpmsg driver for a rpmsg device
+		to be specified which will override standard OF, ID table
+		and name matching.