Merge tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrlgrafted

Pull pin control updates from Linus Walleij:
 "Core changes:

   - Use the non-blocking mux_state_try_select() in the generic MUX pin
     control back-end

   - Free pin maps on pinctrl_generic_to_map() failure in the core
     helpers

  New hardware pin control:

   - Qualcomm Maili TLMM SoC, PMG1110 PMIC, and Eliza LPASS LPI TLMM SoC
     (this is for the low power audio, LPASS = Low Power Audio SubSystem
     portions)

   - Upboard support on top of the Intel pin controller

   - Apple T6030 and T6031 support (just compatible strings)

   - Samsung Exynos 8855 SoC

   - Mediatek MT6858 SoC

   - Rockchip RK3308B and RV1106 SoCs

   - Airoha EN7523 and AN7563 SoCs

  Improvements:

   - Qualcomm TLMM GPIOs are unconditionally marked as wakeup capable

   - Qualcomm improvements on top of the Qualcomm PDC (power domain
     controller) irqchip improvements from tglx:s tree

   - Qualcomm IPQ806x and IPQ9650 non-urgent pin grop fixups

   - The NPCM8xx driver has been put into shape fixing many pin and
     group definitions

   - Some non-urgent Tegra 264 pin assignments are fixed up

   - Some non-urgent fixups to Airoha AN7581 and AN7583 registers and
     pin assignments, missing features etc"

* tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (130 commits)
  dt-bindings: pinctrl: Convert TI DA850 pupd to DT schema
  pinctrl: meson: sync some modify from A4
  pinctrl: meson: a4: Add input enable pin configuration
  pinctrl: realtek: rtd1625: remove unused group name spdif_sel
  pinctrl: realtek: rtd1625: fix base_bit for VE4 GPIO 13
  dt-bindings: pinctrl: microchip,pic32mzda-pinctrl: Convert to DT schema
  Revert "Merge branch 'ib-rsk7204' into devel"
  pinctrl: rockchip: Add RV1106 pinctrl support
  dt-bindings: pinctrl: rockchip: Add RV1106 compatible
  pinctrl: rockchip: Decode drive strength in the get function
  pinctrl: fix PINCTRL_GENERIC_MUX not always being selectable
  pinctrl: airoha: add support of an7563 SoC
  dt-bindings: pinctrl: airoha: add support of an7563 pin controller
  pinctrl: airoha: try to find chip scu node by phandle first
  pinctrl: airoha: add support of en7523 SoC
  dt-bindings: pinctrl: airoha: add support of en7523 pin controller
  pinctrl: airoha: an7583: add support for olt pinmux
  pinctrl: airoha: an7583: add support for pon_alt pinmux
  pinctrl: airoha: an7583: add support for npu_uart pinmux
  dt-bindings: pinctrl: airoha: an7583: add missed features
  ...

1 files changed, 56 insertions, 0 deletions

diff --git a/Documentation/ABI/testing/sysfs-bus-css b/Documentation/ABI/testing/sysfs-bus-css
new file mode 100644
index 000000000..d4d5cfb63
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-bus-css
@@ -0,0 +1,56 @@
+What:		/sys/bus/css/devices/.../type
+Date:		March 2008
+Contact:	linux-s390@vger.kernel.org
+Description:	Contains the subchannel type, as reported by the hardware.
+		This attribute is present for all subchannel types.
+
+What:		/sys/bus/css/devices/.../modalias
+Date:		March 2008
+Contact:	linux-s390@vger.kernel.org
+Description:	Contains the module alias as reported with uevents.
+		It is of the format css:t<type> and present for all
+		subchannel types.
+
+What:		/sys/bus/css/drivers/io_subchannel/.../chpids
+Date:		December 2002
+Contact:	linux-s390@vger.kernel.org
+Description:	Contains the ids of the channel paths used by this
+		subchannel, as reported by the channel subsystem
+		during subchannel recognition.
+
+		Note: This is an I/O-subchannel specific attribute.
+Users:		s390-tools, HAL
+
+What:		/sys/bus/css/drivers/io_subchannel/.../pimpampom
+Date:		December 2002
+Contact:	linux-s390@vger.kernel.org
+Description:	Contains the PIM/PAM/POM values, as reported by the
+		channel subsystem when last queried by the common I/O
+		layer (this implies that this attribute is not necessarily
+		in sync with the values current in the channel subsystem).
+
+		Note: This is an I/O-subchannel specific attribute.
+Users:		s390-tools, HAL
+
+What:		/sys/bus/css/devices/.../driver_override
+Date:		June 2019
+Contact:	linux-s390@vger.kernel.org
+Description:	This file allows the driver for a device to be specified. When
+		specified, only a driver with a name matching the value written
+		to driver_override will have an opportunity to bind to the
+		device. The override is specified by writing a string to the
+		driver_override file (echo vfio-ccw > driver_override) and
+		may be cleared with an empty string (echo > driver_override).
+		This returns the device to standard matching rules binding.
+		Writing to driver_override does not automatically unbind the
+		device from its current driver or make any attempt to
+		automatically load the specified driver.  If no driver with a
+		matching name is currently loaded in the kernel, the device
+		will not bind to any driver.  This also allows devices to
+		opt-out of driver binding using a driver_override name such as
+		"none".  Only a single driver may be specified in the override,
+		there is no support for parsing delimiters.
+
+		Note that unlike the mechanism of the same name for pci, this
+		file does not allow to override basic matching rules. I.e.,
+		the driver must still match the subchannel type of the device.