Merge tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrlgrafted

Pull pin control updates from Linus Walleij:
 "Core changes:

   - Use the non-blocking mux_state_try_select() in the generic MUX pin
     control back-end

   - Free pin maps on pinctrl_generic_to_map() failure in the core
     helpers

  New hardware pin control:

   - Qualcomm Maili TLMM SoC, PMG1110 PMIC, and Eliza LPASS LPI TLMM SoC
     (this is for the low power audio, LPASS = Low Power Audio SubSystem
     portions)

   - Upboard support on top of the Intel pin controller

   - Apple T6030 and T6031 support (just compatible strings)

   - Samsung Exynos 8855 SoC

   - Mediatek MT6858 SoC

   - Rockchip RK3308B and RV1106 SoCs

   - Airoha EN7523 and AN7563 SoCs

  Improvements:

   - Qualcomm TLMM GPIOs are unconditionally marked as wakeup capable

   - Qualcomm improvements on top of the Qualcomm PDC (power domain
     controller) irqchip improvements from tglx:s tree

   - Qualcomm IPQ806x and IPQ9650 non-urgent pin grop fixups

   - The NPCM8xx driver has been put into shape fixing many pin and
     group definitions

   - Some non-urgent Tegra 264 pin assignments are fixed up

   - Some non-urgent fixups to Airoha AN7581 and AN7583 registers and
     pin assignments, missing features etc"

* tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (130 commits)
  dt-bindings: pinctrl: Convert TI DA850 pupd to DT schema
  pinctrl: meson: sync some modify from A4
  pinctrl: meson: a4: Add input enable pin configuration
  pinctrl: realtek: rtd1625: remove unused group name spdif_sel
  pinctrl: realtek: rtd1625: fix base_bit for VE4 GPIO 13
  dt-bindings: pinctrl: microchip,pic32mzda-pinctrl: Convert to DT schema
  Revert "Merge branch 'ib-rsk7204' into devel"
  pinctrl: rockchip: Add RV1106 pinctrl support
  dt-bindings: pinctrl: rockchip: Add RV1106 compatible
  pinctrl: rockchip: Decode drive strength in the get function
  pinctrl: fix PINCTRL_GENERIC_MUX not always being selectable
  pinctrl: airoha: add support of an7563 SoC
  dt-bindings: pinctrl: airoha: add support of an7563 pin controller
  pinctrl: airoha: try to find chip scu node by phandle first
  pinctrl: airoha: add support of en7523 SoC
  dt-bindings: pinctrl: airoha: add support of en7523 pin controller
  pinctrl: airoha: an7583: add support for olt pinmux
  pinctrl: airoha: an7583: add support for pon_alt pinmux
  pinctrl: airoha: an7583: add support for npu_uart pinmux
  dt-bindings: pinctrl: airoha: an7583: add missed features
  ...

1 files changed, 109 insertions, 0 deletions

diff --git a/Documentation/ABI/testing/debugfs-driver-qat b/Documentation/ABI/testing/debugfs-driver-qat
new file mode 100644
index 000000000..3f1efbbad
--- /dev/null
+++ b/Documentation/ABI/testing/debugfs-driver-qat
@@ -0,0 +1,109 @@
+What:		/sys/kernel/debug/qat_<device>_<BDF>/fw_counters
+Date:		November 2023
+KernelVersion:	6.6
+Contact:	qat-linux@intel.com
+Description:	(RO) Read returns the number of requests sent to the FW and the number of responses
+		received from the FW for each Acceleration Engine
+		Reported firmware counters::
+
+			<N>: Number of requests sent from Acceleration Engine N to FW and responses
+			     Acceleration Engine N received from FW
+
+What:		/sys/kernel/debug/qat_<device>_<BDF>/heartbeat/config
+Date:		November 2023
+KernelVersion:	6.6
+Contact:	qat-linux@intel.com
+Description:	(RW) Read returns value of the Heartbeat update period.
+		Write to the file changes this period value.
+
+		This period should reflect planned polling interval of device
+		health status. High frequency Heartbeat monitoring wastes CPU cycles
+		but minimizes the customer’s system downtime. Also, if there are
+		large service requests that take some time to complete, high frequency
+		Heartbeat monitoring could result in false reports of unresponsiveness
+		and in those cases, period needs to be increased.
+
+		This parameter is effective only for c3xxx, c62x, dh895xcc devices.
+		4xxx has this value internally fixed to 200ms.
+
+		Default value is set to 500. Minimal allowed value is 200.
+		All values are expressed in milliseconds.
+
+What:		/sys/kernel/debug/qat_<device>_<BDF>/heartbeat/queries_failed
+Date:		November 2023
+KernelVersion:	6.6
+Contact:	qat-linux@intel.com
+Description:	(RO) Read returns the number of times the device became unresponsive.
+
+		Attribute returns value of the counter which is incremented when
+		status query results negative.
+
+What:		/sys/kernel/debug/qat_<device>_<BDF>/heartbeat/queries_sent
+Date:		November 2023
+KernelVersion:	6.6
+Contact:	qat-linux@intel.com
+Description:	(RO) Read returns the number of times the control process checked
+		if the device is responsive.
+
+		Attribute returns value of the counter which is incremented on
+		every status query.
+
+What:		/sys/kernel/debug/qat_<device>_<BDF>/heartbeat/status
+Date:		November 2023
+KernelVersion:	6.6
+Contact:	qat-linux@intel.com
+Description:	(RO) Read returns the device health status.
+
+		Returns 0 when device is healthy or -1 when is unresponsive
+		or the query failed to send.
+
+		The driver does not monitor for Heartbeat. It is left for a user
+		to poll the status periodically.
+
+What:		/sys/kernel/debug/qat_<device>_<BDF>/pm_status
+Date:		January 2024
+KernelVersion:	6.7
+Contact:	qat-linux@intel.com
+Description:	(RO) Read returns power management information specific to the
+		QAT device.
+
+		This attribute is only available for qat_4xxx and qat_6xxx devices.
+
+What:		/sys/kernel/debug/qat_<device>_<BDF>/cnv_errors
+Date:		January 2024
+KernelVersion:	6.7
+Contact:	qat-linux@intel.com
+Description:	(RO) Read returns, for each Acceleration Engine (AE), the number
+		of errors and the type of the last error detected by the device
+		when performing verified compression.
+		Reported counters::
+
+			<N>: Number of Compress and Verify (CnV) errors and type
+			     of the last CnV error detected by Acceleration
+			     Engine N.
+
+What:		/sys/kernel/debug/qat_<device>_<BDF>/heartbeat/inject_error
+Date:		March 2024
+KernelVersion:	6.8
+Contact:	qat-linux@intel.com
+Description:	(WO) Write to inject an error that simulates an heartbeat
+		failure. This is to be used for testing purposes.
+
+		After writing this file, the driver stops arbitration on a
+		random engine and disables the fetching of heartbeat counters.
+		If a workload is running on the device, a job submitted to the
+		accelerator might not get a response and a read of the
+		`heartbeat/status` attribute might report -1, i.e. device
+		unresponsive.
+		The error is unrecoverable thus the device must be restarted to
+		restore its functionality.
+
+		This attribute is available only when the kernel is built with
+		CONFIG_CRYPTO_DEV_QAT_ERROR_INJECTION=y.
+
+		A write of 1 enables error injection.
+
+		The following example shows how to enable error injection::
+
+			# cd /sys/kernel/debug/qat_<device>_<BDF>
+			# echo 1 > heartbeat/inject_error