openrisc: fix arbitrary kernel memory access via or1k_atomic syscallgrafted

sys_or1k_atomic() (syscall 244 in the "or1k" ABI) takes two user
pointers, v1 and v2, and swaps the words they point to in hand-written
assembly.

    l.lwz   r29,0(r4)
    l.lwz   r27,0(r5)
    l.sw    0(r4),r27
    l.sw    0(r5),r29

The pointers are not checked with access_ok(). The four memory
accesses also have no exception table entries.

A caller passes a kernel address as either pointer, and the syscall
reads from and writes to it directly.

This gives an unprivileged process a kernel read/write primitive. It
overwrites kernel data such as the sys_call_table, gaining code
execution in kernel context.

Check both pointers before entering the critical section. Add fixups
for the four memory accesses so faults on valid but unmapped user
addresses return -EFAULT.

[shorne@gmail.com: fix comment style]
Fixes: 9d02a4283e9c ("OpenRISC: Boot code")
Cc: stable@vger.kernel.org
Signed-off-by: Ali Ahmet Memis <ali@iusegentoo.com>
Signed-off-by: Stafford Horne <shorne@gmail.com>

1 files changed, 157 insertions, 0 deletions

diff --git a/Documentation/ABI/testing/debugfs-cxl b/Documentation/ABI/testing/debugfs-cxl
new file mode 100644
index 000000000..2989d4da9
--- /dev/null
+++ b/Documentation/ABI/testing/debugfs-cxl
@@ -0,0 +1,157 @@
+What:		/sys/kernel/debug/cxl/memX/inject_poison
+Date:		April, 2023
+KernelVersion:	v6.4
+Contact:	linux-cxl@vger.kernel.org
+Description:
+		(WO) When a Device Physical Address (DPA) is written to this
+		attribute, the memdev driver sends an inject poison command to
+		the device for the specified address. The DPA must be 64-byte
+		aligned and the length of the injected poison is 64-bytes. If
+		successful, the device returns poison when the address is
+		accessed through the CXL.mem bus. Injecting poison adds the
+		address to the device's Poison List and the error source is set
+		to Injected. In addition, the device adds a poison creation
+		event to its internal Informational Event log, updates the
+		Event Status register, and if configured, interrupts the host.
+		It is not an error to inject poison into an address that
+		already has poison present and no error is returned. If the
+		device returns 'Inject Poison Limit Reached' an -EBUSY error
+		is returned to the user. The inject_poison attribute is only
+		visible for devices supporting the capability.
+
+		TEST-ONLY INTERFACE: This interface is intended for testing
+		and validation purposes only. It is not a data repair mechanism
+		and should never be used on production systems or live data.
+
+		DATA LOSS RISK: For CXL persistent memory (PMEM) devices,
+		poison injection can result in permanent data loss. Injected
+		poison may render data permanently inaccessible even after
+		clearing, as the clear operation writes zeros and does not
+		recover original data.
+
+		SYSTEM STABILITY RISK: For volatile memory, poison injection
+		can cause kernel crashes, system instability, or unpredictable
+		behavior if the poisoned addresses are accessed by running code
+		or critical kernel structures.
+
+What:		/sys/kernel/debug/cxl/memX/clear_poison
+Date:		April, 2023
+KernelVersion:	v6.4
+Contact:	linux-cxl@vger.kernel.org
+Description:
+		(WO) When a Device Physical Address (DPA) is written to this
+		attribute, the memdev driver sends a clear poison command to
+		the device for the specified address. Clearing poison removes
+		the address from the device's Poison List and writes 0 (zero)
+		for 64 bytes starting at address. It is not an error to clear
+		poison from an address that does not have poison set. If the
+		device cannot clear poison from the address, -ENXIO is returned.
+		The clear_poison attribute is only visible for devices
+		supporting the capability.
+
+		TEST-ONLY INTERFACE: This interface is intended for testing
+		and validation purposes only. It is not a data repair mechanism
+		and should never be used on production systems or live data.
+
+		CLEAR IS NOT DATA RECOVERY: This operation writes zeros to the
+		specified address range and removes the address from the poison
+		list. It does NOT recover or restore original data that may have
+		been present before poison injection. Any original data at the
+		cleared address is permanently lost and replaced with zeros.
+
+		CLEAR IS NOT A REPAIR MECHANISM: This interface is for testing
+		purposes only and should not be used as a data repair tool.
+		Clearing poison is fundamentally different from data recovery
+		or error correction.
+
+What:		/sys/kernel/debug/cxl/regionX/inject_poison
+Date:		August, 2025
+Contact:	linux-cxl@vger.kernel.org
+Description:
+		(WO) When a Host Physical Address (HPA) is written to this
+		attribute, the region driver translates it to a Device
+		Physical Address (DPA) and identifies the corresponding
+		memdev. It then sends an inject poison command to that memdev
+		at the translated DPA. Refer to the memdev ABI entry at:
+		/sys/kernel/debug/cxl/memX/inject_poison for the detailed
+		behavior. This attribute is only visible if all memdevs
+		participating in the region support both inject and clear
+		poison commands.
+
+		TEST-ONLY INTERFACE: This interface is intended for testing
+		and validation purposes only. It is not a data repair mechanism
+		and should never be used on production systems or live data.
+
+		DATA LOSS RISK: For CXL persistent memory (PMEM) devices,
+		poison injection can result in permanent data loss. Injected
+		poison may render data permanently inaccessible even after
+		clearing, as the clear operation writes zeros and does not
+		recover original data.
+
+		SYSTEM STABILITY RISK: For volatile memory, poison injection
+		can cause kernel crashes, system instability, or unpredictable
+		behavior if the poisoned addresses are accessed by running code
+		or critical kernel structures.
+
+What:		/sys/kernel/debug/cxl/regionX/clear_poison
+Date:		August, 2025
+Contact:	linux-cxl@vger.kernel.org
+Description:
+		(WO) When a Host Physical Address (HPA) is written to this
+		attribute, the region driver translates it to a Device
+		Physical Address (DPA) and identifies the corresponding
+		memdev. It then sends a clear poison command to that memdev
+		at the translated DPA. Refer to the memdev ABI entry at:
+		/sys/kernel/debug/cxl/memX/clear_poison for the detailed
+		behavior. This attribute is only visible if all memdevs
+		participating in the region support both inject and clear
+		poison commands.
+
+		TEST-ONLY INTERFACE: This interface is intended for testing
+		and validation purposes only. It is not a data repair mechanism
+		and should never be used on production systems or live data.
+
+		CLEAR IS NOT DATA RECOVERY: This operation writes zeros to the
+		specified address range and removes the address from the poison
+		list. It does NOT recover or restore original data that may have
+		been present before poison injection. Any original data at the
+		cleared address is permanently lost and replaced with zeros.
+
+		CLEAR IS NOT A REPAIR MECHANISM: This interface is for testing
+		purposes only and should not be used as a data repair tool.
+		Clearing poison is fundamentally different from data recovery
+		or error correction.
+
+What:		/sys/kernel/debug/cxl/einj_types
+Date:		January, 2024
+KernelVersion:	v6.9
+Contact:	linux-cxl@vger.kernel.org
+Description:
+		(RO) Prints the CXL protocol error types made available by
+		the platform in the format:
+
+			0x<error number> <error type>
+
+		The possible error types are (as of ACPI v6.5):
+
+			0x1000	CXL.cache Protocol Correctable
+			0x2000	CXL.cache Protocol Uncorrectable non-fatal
+			0x4000	CXL.cache Protocol Uncorrectable fatal
+			0x8000	CXL.mem Protocol Correctable
+			0x10000	CXL.mem Protocol Uncorrectable non-fatal
+			0x20000	CXL.mem Protocol Uncorrectable fatal
+
+		The <error number> can be written to einj_inject to inject
+		<error type> into a chosen dport.
+
+What:		/sys/kernel/debug/cxl/$dport_dev/einj_inject
+Date:		January, 2024
+KernelVersion:	v6.9
+Contact:	linux-cxl@vger.kernel.org
+Description:
+		(WO) Writing an integer to this file injects the corresponding
+		CXL protocol error into $dport_dev ($dport_dev will be a device
+		name from /sys/bus/pci/devices). The integer to type mapping for
+		injection can be found by reading from einj_types. If the dport
+		was enumerated in RCH mode, a CXL 1.1 error is injected, otherwise
+		a CXL 2.0 error is injected.