// SPDX-License-Identifier: BSD-3-Clause
/*
 * Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries.
 */

#include <dt-bindings/clock/qcom,dispcc-qcm2290.h>
#include <dt-bindings/clock/qcom,qcm2290-gpucc.h>
#include <dt-bindings/clock/qcom,rpmcc.h>
#include <dt-bindings/clock/qcom,shikra-gcc.h>
#include <dt-bindings/interconnect/qcom,icc.h>
#include <dt-bindings/interconnect/qcom,osm-l3.h>
#include <dt-bindings/dma/qcom-gpi.h>
#include <dt-bindings/interconnect/qcom,rpm-icc.h>
#include <dt-bindings/interconnect/qcom,shikra.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/power/qcom-rpmpd.h>
#include <dt-bindings/thermal/thermal.h>

/ {
	interrupt-parent = <&intc>;

	#address-cells = <2>;
	#size-cells = <2>;

	clocks {
		xo_board: xo-board {
			compatible = "fixed-clock";
			clock-frequency = <38400000>;
			#clock-cells = <0>;
		};

		sleep_clk: sleep-clk {
			compatible = "fixed-clock";
			clock-frequency = <32764>;
			#clock-cells = <0>;
		};
	};

	cpus {
		#address-cells = <2>;
		#size-cells = <0>;

		cpu0: cpu@0 {
			device_type = "cpu";
			compatible = "arm,cortex-a55";
			reg = <0x0 0x0>;
			enable-method = "psci";
			next-level-cache = <&l3>;
			capacity-dmips-mhz = <1024>;
			dynamic-power-coefficient = <100>;
			clocks = <&cpufreq_hw 0>;
			qcom,freq-domain = <&cpufreq_hw 0>;
			#cooling-cells = <2>;
			operating-points-v2 = <&cpu0_opp_table>;
			interconnects = <&mem_noc MASTER_AMPSS_M0 RPM_ACTIVE_TAG
					 &mc_virt SLAVE_EBI_CH0 RPM_ACTIVE_TAG>,
					<&epss_l3 MASTER_EPSS_L3_APPS
					 &epss_l3 SLAVE_EPSS_L3_SHARED>;
		};

		cpu1: cpu@100 {
			device_type = "cpu";
			compatible = "arm,cortex-a55";
			reg = <0x0 0x100>;
			enable-method = "psci";
			next-level-cache = <&l3>;
			capacity-dmips-mhz = <1024>;
			dynamic-power-coefficient = <100>;
			clocks = <&cpufreq_hw 0>;
			qcom,freq-domain = <&cpufreq_hw 0>;
			#cooling-cells = <2>;
			operating-points-v2 = <&cpu0_opp_table>;
			interconnects = <&mem_noc MASTER_AMPSS_M0 RPM_ACTIVE_TAG
					 &mc_virt SLAVE_EBI_CH0 RPM_ACTIVE_TAG>,
					<&epss_l3 MASTER_EPSS_L3_APPS
					 &epss_l3 SLAVE_EPSS_L3_SHARED>;
		};

		cpu2: cpu@200 {
			device_type = "cpu";
			compatible = "arm,cortex-a55";
			reg = <0x0 0x200>;
			enable-method = "psci";
			next-level-cache = <&l3>;
			capacity-dmips-mhz = <1024>;
			dynamic-power-coefficient = <100>;
			clocks = <&cpufreq_hw 0>;
			qcom,freq-domain = <&cpufreq_hw 0>;
			#cooling-cells = <2>;
			operating-points-v2 = <&cpu0_opp_table>;
			interconnects = <&mem_noc MASTER_AMPSS_M0 RPM_ACTIVE_TAG
					 &mc_virt SLAVE_EBI_CH0 RPM_ACTIVE_TAG>,
					<&epss_l3 MASTER_EPSS_L3_APPS
					 &epss_l3 SLAVE_EPSS_L3_SHARED>;
		};

		cpu3: cpu@300 {
			device_type = "cpu";
			compatible = "arm,cortex-a78c";
			reg = <0x0 0x300>;
			enable-method = "psci";
			next-level-cache = <&l2_3>;
			capacity-dmips-mhz = <1946>;
			dynamic-power-coefficient = <489>;
			clocks = <&cpufreq_hw 1>;
			qcom,freq-domain = <&cpufreq_hw 1>;
			#cooling-cells = <2>;
			operating-points-v2 = <&cpu3_opp_table>;
			interconnects = <&mem_noc MASTER_AMPSS_M0 RPM_ACTIVE_TAG
					 &mc_virt SLAVE_EBI_CH0 RPM_ACTIVE_TAG>,
					<&epss_l3 MASTER_EPSS_L3_APPS
					 &epss_l3 SLAVE_EPSS_L3_SHARED>;

			l2_3: l2-cache {
				compatible = "cache";
				cache-level = <2>;
				cache-unified;
				next-level-cache = <&l3>;
				cache-size = <0x40000>;
			};
		};

		cpu-map {
			cluster0 {
				core0 {
					cpu = <&cpu0>;
				};

				core1 {
					cpu = <&cpu1>;
				};

				core2 {
					cpu = <&cpu2>;
				};
			};

			cluster1 {
				core0 {
					cpu = <&cpu3>;
				};
			};
		};

		l3: l3-cache {
			compatible = "cache";
			cache-level = <3>;
			cache-unified;
			cache-size = <0x80000>;
		};
	};

	firmware {
		scm {
			compatible = "qcom,scm-shikra", "qcom,scm";
			clocks = <&rpmcc RPM_SMD_CE1_CLK>;
			clock-names = "core";
			qcom,dload-mode = <&tcsr_regs 0x13000>;
			#reset-cells = <1>;
			interconnects = <&system_noc MASTER_CRYPTO_CORE0 RPM_ALWAYS_TAG
					 &mc_virt SLAVE_EBI_CH0 RPM_ALWAYS_TAG>;
		};
	};

	memory@80000000 {
		device_type = "memory";
		/* We expect the bootloader to fill in the size */
		reg = <0x0 0x80000000 0x0 0x0>;
	};

	cpu0_opp_table: opp-table-cpu0 {
		compatible = "operating-points-v2";
		opp-shared;

		opp-768000000 {
			opp-hz = /bits/ 64 <768000000>;
			opp-peak-kBps = <1200000 17817600>;
		};

		opp-1017600000 {
			opp-hz = /bits/ 64 <1017600000>;
			opp-peak-kBps = <2188000 25804800>;
		};

		opp-1094400000 {
			opp-hz = /bits/ 64 <1094400000>;
			opp-peak-kBps = <3072000 30105600>;
		};

		opp-1497600000 {
			opp-hz = /bits/ 64 <1497600000>;
			opp-peak-kBps = <4068000 38707200>;
		};

		opp-1612800000 {
			opp-hz = /bits/ 64 <1612800000>;
			opp-peak-kBps = <6220000 43008000>;
		};

		opp-1804800000 {
			opp-hz = /bits/ 64 <1804800000>;
			opp-peak-kBps = <7216000 43622400>;
		};

		opp-2208000000 {
			opp-hz = /bits/ 64 <2208000000>;
			opp-peak-kBps = <7216000 43622400>;
		};
	};

	cpu3_opp_table: opp-table-cpu3 {
		compatible = "operating-points-v2";
		opp-shared;

		opp-768000000 {
			opp-hz = /bits/ 64 <768000000>;
			opp-peak-kBps = <1200000 17817600>;
		};

		opp-1017600000 {
			opp-hz = /bits/ 64 <1017600000>;
			opp-peak-kBps = <2188000 25804800>;
		};

		opp-1190400000 {
			opp-hz = /bits/ 64 <1190400000>;
			opp-peak-kBps = <3072000 30105600>;
		};

		opp-1497600000 {
			opp-hz = /bits/ 64 <1497600000>;
			opp-peak-kBps = <4068000 38707200>;
		};

		opp-1708800000 {
			opp-hz = /bits/ 64 <1708800000>;
			opp-peak-kBps = <6220000 43008000>;
		};

		opp-1900800000 {
			opp-hz = /bits/ 64 <1900800000>;
			opp-peak-kBps = <7216000 43622400>;
		};

		opp-2208000000 {
			opp-hz = /bits/ 64 <2208000000>;
			opp-peak-kBps = <7216000 43622400>;
		};
	};

	pmu-a55 {
		compatible = "arm,cortex-a55-pmu";
		interrupts = <GIC_PPI 5 IRQ_TYPE_LEVEL_HIGH &ppi_cluster0>;
	};

	pmu-a78c {
		compatible = "arm,cortex-a78-pmu";
		interrupts = <GIC_PPI 5 IRQ_TYPE_LEVEL_HIGH &ppi_cluster1>;
	};

	psci {
		compatible = "arm,psci-1.0";
		method = "smc";
	};

	rpm: remoteproc {
		compatible = "qcom,shikra-rpm-proc", "qcom,rpm-proc";

		glink-edge {
			compatible = "qcom,glink-rpm";
			interrupts = <GIC_SPI 194 IRQ_TYPE_EDGE_RISING 0>;
			qcom,rpm-msg-ram = <&rpm_msg_ram>;
			mboxes = <&apcs_glb 0>;

			rpm_requests: rpm-requests {
				compatible = "qcom,rpm-shikra", "qcom,glink-smd-rpm";
				qcom,glink-channels = "rpm_requests";

				rpmcc: clock-controller {
					compatible = "qcom,rpmcc-shikra", "qcom,rpmcc-qcm2290", "qcom,rpmcc";
					clocks = <&xo_board>;
					clock-names = "xo";
					#clock-cells = <1>;
				};

				rpmpd: power-controller {
					compatible = "qcom,shikra-rpmpd";
					#power-domain-cells = <1>;
					operating-points-v2 = <&rpmpd_opp_table>;

					rpmpd_opp_table: opp-table {
						compatible = "operating-points-v2";

						rpmpd_opp_min_svs: opp1 {
							opp-level = <RPM_SMD_LEVEL_MIN_SVS>;
						};

						rpmpd_opp_low_svs: opp2 {
							opp-level = <RPM_SMD_LEVEL_LOW_SVS>;
						};

						rpmpd_opp_svs: opp3 {
							opp-level = <RPM_SMD_LEVEL_SVS>;
						};

						rpmpd_opp_svs_plus: opp4 {
							opp-level = <RPM_SMD_LEVEL_SVS_PLUS>;
						};

						rpmpd_opp_nom: opp5 {
							opp-level = <RPM_SMD_LEVEL_NOM>;
						};

						rpmpd_opp_nom_plus: opp6 {
							opp-level = <RPM_SMD_LEVEL_NOM_PLUS>;
						};

						rpmpd_opp_turbo: opp7 {
							opp-level = <RPM_SMD_LEVEL_TURBO>;
						};

						rpmpd_opp_turbo_plus: opp8 {
							opp-level = <RPM_SMD_LEVEL_TURBO_NO_CPR>;
						};
					};
				};
			};
		};

		mpm: interrupt-controller {
			compatible = "qcom,mpm";
			qcom,rpm-msg-ram = <&apss_mpm>;
			interrupts = <GIC_SPI 197 IRQ_TYPE_EDGE_RISING 0>;
			mboxes = <&apcs_glb 1>;
			interrupt-controller;
			#interrupt-cells = <2>;
			#power-domain-cells = <0>;
			interrupt-parent = <&intc>;
			qcom,mpm-pin-count = <96>;
			qcom,mpm-pin-map = <2 275>,  /* TSENS0 uplow */
					   <12 422>, /* DWC3 ss_phy_irq */
					   <58 272>, /* QUSB2_PHY dmse_hv_vddmx */
					   <59 273>, /* QUSB2_PHY dpse_hv_vddmx */
					   <86 183>, /* MPM wake, SPMI */
					   <90 157>, /* QUSB2_PHY DM */
					   <91 158>; /* QUSB2_PHY DP */
		};
	};

	reserved_memory: reserved-memory {
		#address-cells = <2>;
		#size-cells = <2>;
		ranges;

		hyp_mem: hyp@80000000 {
			reg = <0x0 0x80000000 0x0 0x1600000>;
			no-map;
		};

		xblboot_mem: xblboot@85e00000 {
			reg = <0x0 0x85e00000 0x0 0x100000>;
			no-map;
		};

		secdata_apss_mem: secdata-apss@85fff000 {
			reg = <0x0 0x85fff000 0x0 0x1000>;
			no-map;
		};

		smem_mem: smem@86000000 {
			compatible = "qcom,smem";
			reg = <0x0 0x86000000 0x0 0x200000>;
			no-map;

			hwlocks = <&tcsr_mutex 3>;
		};

		audio_heap_mem: audio-heap@86200000 {
			reg = <0x0 0x86200000 0x0 0x100000>;
			no-map;
		};

		tz_stat_mem: tz-stat@a0000000 {
			reg = <0x0 0xa0000000 0x0 0x100000>;
			no-map;
		};

		qtee_mem: qtee@a1300000 {
			reg = <0x0 0xa1300000 0x0 0x500000>;
			no-map;
		};

		tz_apps_mem: tz-apps@a1800000 {
			reg = <0x0 0xa1800000 0x0 0x2100000>;
			no-map;
		};

		mpss_wlan_mem: mpss-wlan@ab000000 {
			reg = <0x0 0xab000000 0x0 0x6e00000>;
			no-map;
		};

		wlan_mem: wlan@b2300000 {
			reg = <0x0 0xb2300000 0x0 0x100000>;
			no-map;
		};

		cdsp_mem: cdsp@b2400000 {
			reg = <0x0 0xb2400000 0x0 0x1900000>;
			no-map;
		};

		gpu_micro_code_mem: gpu-micro-code@b3d00000 {
			reg = <0x0 0xb3d00000 0x0 0x2000>;
			no-map;
		};

		video_mem: video@b3d02000 {
			reg = <0x0 0xb3d02000 0x0 0x700000>;
			no-map;
		};

		lmcu_mem: lmcu@b4402000 {
			reg = <0x0 0xb4402000 0x0 0x300000>;
			no-map;
		};

		lmcu_dtb_mem: lmcu-dtb@b4702000 {
			reg = <0x0 0xb4702000 0x0 0x40000>;
			no-map;
		};
	};

	smp2p-cdsp {
		compatible = "qcom,smp2p";
		qcom,smem = <94>, <432>;

		interrupts = <GIC_SPI 263 IRQ_TYPE_EDGE_RISING 0>;

		mboxes = <&apcs_glb 6>;

		qcom,local-pid = <0>;
		qcom,remote-pid = <5>;

		cdsp_smp2p_out: master-kernel {
			qcom,entry-name = "master-kernel";
			#qcom,smem-state-cells = <1>;
		};

		cdsp_smp2p_in: slave-kernel {
			qcom,entry-name = "slave-kernel";
			interrupt-controller;
			#interrupt-cells = <2>;
		};
	};

	smp2p-lmcu {
		compatible = "qcom,smp2p";
		qcom,smem = <617>, <616>;

		interrupts = <GIC_SPI 287 IRQ_TYPE_EDGE_RISING 0>;

		mboxes = <&apcs_glb 10>;

		qcom,local-pid = <0>;
		qcom,remote-pid = <26>;

		lmcu_smp2p_out: master-kernel {
			qcom,entry-name = "master-kernel";
			#qcom,smem-state-cells = <1>;
		};

		lmcu_smp2p_in: slave-kernel {
			qcom,entry-name = "slave-kernel";
			interrupt-controller;
			#interrupt-cells = <2>;
		};
	};

	smp2p-mpss {
		compatible = "qcom,smp2p";
		qcom,smem = <435>, <428>;

		interrupts = <GIC_SPI 70 IRQ_TYPE_EDGE_RISING 0>;

		mboxes = <&apcs_glb 14>;

		qcom,local-pid = <0>;
		qcom,remote-pid = <1>;

		modem_smp2p_out: master-kernel {
			qcom,entry-name = "master-kernel";
			#qcom,smem-state-cells = <1>;
		};

		modem_smp2p_in: slave-kernel {
			qcom,entry-name = "slave-kernel";
			interrupt-controller;
			#interrupt-cells = <2>;
		};
	};

	soc: soc@0 {
		compatible = "simple-bus";

		#address-cells = <2>;
		#size-cells = <2>;
		dma-ranges = <0x0 0x0 0x0 0x0 0x10 0x0>;
		ranges = <0x0 0x0 0x0 0x0 0x10 0x0>;

		tcsr_mutex: syscon@340000 {
			compatible = "qcom,tcsr-mutex";
			reg = <0x0 0x00340000 0x0 0x20000>;
			#hwlock-cells = <1>;
		};

		tcsr_regs: syscon@3c0000 {
			compatible = "qcom,shikra-tcsr", "syscon";
			reg = <0x0 0x003c0000 0x0 0x40000>;
		};

		tlmm: pinctrl@500000 {
			compatible = "qcom,shikra-tlmm";
			reg = <0x0 0x00500000 0x0 0x700000>;

			interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH 0>;

			gpio-controller;
			#gpio-cells = <2>;

			interrupt-controller;
			#interrupt-cells = <2>;

			gpio-ranges = <&tlmm 0 0 165>;
			wakeup-parent = <&mpm>;

			qup_i2c0_data_clk: qup-i2c0-data-clk-state {
				/* SDA, SCL */
				pins = "gpio2", "gpio3";
				function = "qup0_se0";
				drive-strength = <2>;
				bias-pull-up;
			};

			qup_i2c1_data_clk: qup-i2c1-data-clk-state {
				/* SDA, SCL */
				pins = "gpio4", "gpio5";
				function = "qup0_se1_01";
				drive-strength = <2>;
				bias-pull-up;
			};

			qup_i2c2_data_clk: qup-i2c2-data-clk-state {
				/* SDA, SCL */
				pins = "gpio6", "gpio7";
				function = "qup0_se2";
				drive-strength = <2>;
				bias-pull-up;
			};

			qup_i2c3_data_clk: qup-i2c3-data-clk-state {
				/* SDA, SCL */
				pins = "gpio10", "gpio11";
				function = "qup0_se3_01";
				drive-strength = <2>;
				bias-pull-up;
			};

			qup_i2c4_data_clk: qup-i2c4-data-clk-state {
				/* SDA, SCL */
				pins = "gpio12", "gpio13";
				function = "qup0_se4_01";
				drive-strength = <2>;
				bias-pull-up;
			};

			qup_i2c5_data_clk: qup-i2c5-data-clk-state {
				/* SDA, SCL */
				pins = "gpio14", "gpio15";
				function = "qup0_se5";
				drive-strength = <2>;
				bias-pull-up;
			};

			qup_i2c6_data_clk: qup-i2c6-data-clk-state {
				/* SDA, SCL */
				pins = "gpio18", "gpio19";
				function = "qup0_se6";
				drive-strength = <2>;
				bias-pull-up;
			};

			qup_i2c7_data_clk: qup-i2c7-data-clk-state {
				/* SDA, SCL */
				pins = "gpio20", "gpio21";
				function = "qup0_se7_01";
				drive-strength = <2>;
				bias-pull-up;
			};

			qup_i2c8_data_clk: qup-i2c8-data-clk-state {
				/* SDA, SCL */
				pins = "gpio22", "gpio23";
				function = "qup0_se8";
				drive-strength = <2>;
				bias-pull-up;
			};

			qup_i2c9_data_clk: qup-i2c9-data-clk-state {
				/* SDA, SCL */
				pins = "gpio27", "gpio26";
				function = "qup0_se9_01";
				drive-strength = <2>;
				bias-pull-up;
			};

			qup_spi0_cs: qup-spi0-cs-state {
				pins = "gpio1";
				function = "qup0_se0";
				drive-strength = <6>;
				bias-disable;
			};

			qup_spi0_data_clk: qup-spi0-data-clk-state {
				/* MISO, MOSI, CLK */
				pins = "gpio2", "gpio3", "gpio0";
				function = "qup0_se0";
				drive-strength = <6>;
				bias-disable;
			};

			qup_spi2_cs: qup-spi2-cs-state {
				pins = "gpio9";
				function = "qup0_se2";
				drive-strength = <6>;
				bias-disable;
			};

			qup_spi2_data_clk: qup-spi2-data-clk-state {
				/* MISO, MOSI, CLK */
				pins = "gpio6", "gpio7", "gpio8";
				function = "qup0_se2";
				drive-strength = <6>;
				bias-disable;
			};

			qup_spi5_cs: qup-spi5-cs-state {
				pins = "gpio17";
				function = "qup0_se5";
				drive-strength = <6>;
				bias-disable;
			};

			qup_spi5_data_clk: qup-spi5-data-clk-state {
				/* MISO, MOSI, CLK */
				pins = "gpio14", "gpio15", "gpio16";
				function = "qup0_se5";
				drive-strength = <6>;
				bias-disable;
			};

			qup_spi6_cs: qup-spi6-cs-state {
				pins = "gpio29";
				function = "qup0_se6";
				drive-strength = <6>;
				bias-disable;
			};

			qup_spi6_data_clk: qup-spi6-data-clk-state {
				/* MISO, MOSI, CLK */
				pins = "gpio18", "gpio19", "gpio28";
				function = "qup0_se6";
				drive-strength = <6>;
				bias-disable;
			};

			qup_spi8_cs: qup-spi8-cs-state {
				pins = "gpio25";
				function = "qup0_se8";
				drive-strength = <6>;
				bias-disable;
			};

			qup_spi8_data_clk: qup-spi8-data-clk-state {
				/* MISO, MOSI, CLK */
				pins = "gpio22", "gpio23", "gpio24";
				function = "qup0_se8";
				drive-strength = <6>;
				bias-disable;
			};

			qup_uart0_default: qup-uart0-default-state {
				pins = "gpio0", "gpio1";
				function = "qup0_se0";
				drive-strength = <2>;
				bias-disable;
			};

			qup_uart1_default: qup-uart1-default-state {
				pins = "gpio4", "gpio5";
				function = "qup0_se1_23";
				drive-strength = <2>;
				bias-disable;
			};

			qup_uart2_default: qup-uart2-default-state {
				/* TX, RX */
				pins = "gpio8", "gpio9";
				function = "qup0_se2";
				drive-strength = <2>;
				bias-pull-up;
			};

			qup_uart2_cts_rts: qup-uart2-cts-rts-state {
				/* CTS, RTS */
				pins = "gpio6", "gpio7";
				function = "qup0_se2";
				drive-strength = <2>;
				bias-pull-down;
			};

			qup_uart3_default: qup-uart3-default-state {
				pins = "gpio10", "gpio11";
				function = "qup0_se3_23";
				drive-strength = <2>;
				bias-disable;
			};

			qup_uart4_default: qup-uart4-default-state {
				pins = "gpio12", "gpio13";
				function = "qup0_se4_23";
				drive-strength = <2>;
				bias-disable;
			};

			qup_uart5_default: qup-uart5-default-state {
				/* TX, RX */
				pins = "gpio16", "gpio17";
				function = "qup0_se5";
				drive-strength = <2>;
				bias-pull-up;
			};

			qup_uart5_cts_rts: qup-uart5-cts-rts-state {
				/* CTS, RTS */
				pins = "gpio14", "gpio15";
				function = "qup0_se5";
				drive-strength = <2>;
				bias-pull-down;
			};

			qup_uart6_default: qup-uart6-default-state {
				/* TX, RX */
				pins = "gpio28", "gpio29";
				function = "qup0_se6";
				drive-strength = <2>;
				bias-pull-up;
			};

			qup_uart6_cts_rts: qup-uart6-cts-rts-state {
				/* CTS, RTS */
				pins = "gpio18", "gpio19";
				function = "qup0_se6";
				drive-strength = <2>;
				bias-pull-down;
			};

			qup_uart7_default: qup-uart7-default-state {
				pins = "gpio20", "gpio21";
				function = "qup0_se7_23";
				drive-strength = <2>;
				bias-disable;
			};

			qup_uart8_default: qup-uart8-default-state {
				/* TX, RX */
				pins = "gpio24", "gpio25";
				function = "qup0_se8";
				drive-strength = <2>;
				bias-pull-up;
			};

			qup_uart8_cts_rts: qup-uart8-cts-rts-state {
				/* CTS, RTS */
				pins = "gpio22", "gpio23";
				function = "qup0_se8";
				drive-strength = <2>;
				bias-pull-down;
			};

			qup_uart9_default: qup-uart9-default-state {
				pins = "gpio26", "gpio27";
				function = "qup0_se9_23";
				drive-strength = <2>;
				bias-disable;
			};

			sdc1_state_on: sdc1-on-state {
				clk-pins {
					pins = "sdc1_clk";
					drive-strength = <6>;
					bias-disable;
				};

				cmd-pins {
					pins = "sdc1_cmd";
					drive-strength = <6>;
					bias-pull-up;
				};

				data-pins {
					pins = "sdc1_data";
					drive-strength = <6>;
					bias-pull-up;
				};

				rclk-pins {
					pins = "sdc1_rclk";
					bias-pull-down;
				};
			};

			sdc1_state_off: sdc1-off-state {
				clk-pins {
					pins = "sdc1_clk";
					drive-strength = <2>;
					bias-bus-hold;
				};

				cmd-pins {
					pins = "sdc1_cmd";
					drive-strength = <2>;
					bias-bus-hold;
				};

				data-pins {
					pins = "sdc1_data";
					drive-strength = <2>;
					bias-bus-hold;
				};

				rclk-pins {
					pins = "sdc1_rclk";
					bias-bus-hold;
				};
			};
		};

		pmu@c91000 {
			compatible = "qcom,shikra-cpu-bwmon", "qcom,sc7280-llcc-bwmon";
			reg = <0x0 0x00c91000 0x0 0x1000>;

			interrupts = <GIC_SPI 468 IRQ_TYPE_LEVEL_HIGH 0>;

			interconnects = <&mem_noc MASTER_AMPSS_M0 RPM_ACTIVE_TAG
					 &mc_virt SLAVE_EBI_CH0 RPM_ACTIVE_TAG>;

			operating-points-v2 = <&cpu_bwmon_opp_table>;

			cpu_bwmon_opp_table: opp-table {
				compatible = "operating-points-v2";

				opp-0 {
					opp-peak-kBps = <1200000>;
				};

				opp-1 {
					opp-peak-kBps = <2188000>;
				};

				opp-2 {
					opp-peak-kBps = <3072000>;
				};

				opp-3 {
					opp-peak-kBps = <4068000>;
				};

				opp-4 {
					opp-peak-kBps = <6220000>;
				};

				opp-5 {
					opp-peak-kBps = <7216000>;
				};
			};
		};

		mem_noc: interconnect@d00000 {
			compatible = "qcom,shikra-mem-noc-core";
			reg = <0x0 0x00d00000 0x0 0x43080>;
			clocks = <&gcc GCC_DDRSS_GPU_AXI_CLK>;
			clock-names = "gpu_axi";
			#interconnect-cells = <2>;
		};

		llcc: system-cache-controller@e00000 {
			compatible = "qcom,shikra-llcc";
			reg = <0x0 0x00e00000 0x0 0x80000>,
			      <0x0 0x00f00000 0x0 0x80000>,
			      <0x0 0x01000000 0x0 0x80000>;
			reg-names = "llcc0_base",
				    "llcc1_base",
				    "llcc_broadcast_base";
			interrupts = <GIC_SPI 539 IRQ_TYPE_LEVEL_HIGH 0>;
		};

		gcc: clock-controller@1400000 {
			compatible = "qcom,shikra-gcc";
			reg = <0x0 0x01400000 0x0 0x1f0000>;
			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
				 <&sleep_clk>,
				 <0>,
				 <0>,
				 <0>,
				 <0>,
				 <0>,
				 <0>;
			power-domains = <&rpmpd RPMPD_VDDCX>;
			#clock-cells = <1>;
			#reset-cells = <1>;
			#power-domain-cells = <1>;
		};

		system_noc: interconnect@1880000 {
			compatible = "qcom,shikra-sys-noc";
			reg = <0x0 0x01880000 0x0 0x6a080>;
			clocks = <&gcc GCC_EMAC0_AXI_SYS_NOC_CLK>,
				 <&gcc GCC_EMAC1_AXI_SYS_NOC_CLK>,
				 <&gcc GCC_SYS_NOC_USB2_PRIM_AXI_CLK>,
				 <&gcc GCC_SYS_NOC_USB3_PRIM_AXI_CLK>;
			clock-names = "emac0_axi",
				      "emac1_axi",
				      "usb2_axi",
				      "usb3_axi";
			#interconnect-cells = <2>;

			clk_virt: interconnect-clk {
				compatible = "qcom,shikra-clk-virt";
				#interconnect-cells = <2>;
			};

			mc_virt: interconnect-mc {
				compatible = "qcom,shikra-mc-virt";
				#interconnect-cells = <2>;
			};

			mmrt_virt: interconnect-mmrt {
				compatible = "qcom,shikra-mmrt-virt";
				#interconnect-cells = <2>;
			};

			mmnrt_virt: interconnect-mmnrt {
				compatible = "qcom,shikra-mmnrt-virt";
				#interconnect-cells = <2>;
			};
		};

		config_noc: interconnect@1900000 {
			compatible = "qcom,shikra-config-noc";
			reg = <0x0 0x01900000 0x0 0x8080>;
			#interconnect-cells = <2>;
		};

		qfprom: efuse@1b44000 {
			compatible = "qcom,shikra-qfprom", "qcom,qfprom";
			reg = <0x0 0x01b44000 0x0 0x3000>;
			#address-cells = <1>;
			#size-cells = <1>;

			qusb2_hstx_trim_1: hstx-trim@25b {
				reg = <0x25b 0x1>;
				bits = <1 4>;
			};

			gpu_speed_bin: gpu-speed-bin@2006 {
				reg = <0x2006 0x2>;
				bits = <5 8>;
			};
		};

		spmi_bus: spmi@1c40000 {
			compatible = "qcom,spmi-pmic-arb";
			reg = <0x0 0x01c40000 0x0 0x1100>,
			      <0x0 0x01e00000 0x0 0x2000000>,
			      <0x0 0x03e00000 0x0 0x100000>,
			      <0x0 0x03f00000 0x0 0xa0000>,
			      <0x0 0x01c0a000 0x0 0x26000>;
			reg-names = "core",
				    "chnls",
				    "obsrvr",
				    "intr",
				    "cnfg";
			interrupts-extended = <&mpm 86 IRQ_TYPE_LEVEL_HIGH>;
			interrupt-names = "periph_irq";
			interrupt-controller;
			#interrupt-cells = <4>;
			#address-cells = <2>;
			#size-cells = <0>;
			qcom,channel = <0>;
			qcom,ee = <0>;
		};

		tsens0: thermal-sensor@4411000 {
			compatible = "qcom,shikra-tsens", "qcom,tsens-v2";
			reg = <0x0 0x04411000 0x0 0x1000>,
			      <0x0 0x04410000 0x0 0x1000>;
			interrupts = <GIC_SPI 275 IRQ_TYPE_LEVEL_HIGH 0>,
				     <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH 0>;
			interrupt-names = "uplow",
					  "critical";
			#qcom,sensors = <14>;
			#thermal-sensor-cells = <1>;
		};

		rpm_msg_ram: sram@45f0000 {
			compatible = "qcom,rpm-msg-ram", "mmio-sram";
			reg = <0x0 0x045f0000 0x0 0x7000>;

			#address-cells = <1>;
			#size-cells = <1>;
			ranges = <0x0 0x0 0x045f0000 0x7000>;

			apss_mpm: sram@1b8 {
				reg = <0x1b8 0x48>;
			};
		};

		sram@4690000 {
			compatible = "qcom,rpm-stats";
			reg = <0x0 0x04690000 0x0 0x14000>;
		};

		sdhc_1: mmc@4744000 {
			compatible = "qcom,shikra-sdhci", "qcom,sdhci-msm-v5";

			reg = <0x0 0x04744000 0x0 0x1000>,
			      <0x0 0x04745000 0x0 0x1000>;
			reg-names = "hc",
				    "cqhci";

			iommus = <&apps_smmu 0xc0 0x0>;

			interrupts = <GIC_SPI 348 IRQ_TYPE_LEVEL_HIGH 0>,
				     <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH 0>;
			interrupt-names = "hc_irq",
					  "pwr_irq";

			clocks = <&gcc GCC_SDCC1_AHB_CLK>,
				 <&gcc GCC_SDCC1_APPS_CLK>,
				 <&rpmcc RPM_SMD_XO_CLK_SRC>;
			clock-names = "iface",
				      "core",
				      "xo";

			interconnects = <&system_noc MASTER_SDCC_1 RPM_ALWAYS_TAG
					 &mc_virt SLAVE_EBI_CH0 RPM_ALWAYS_TAG>,
					<&mem_noc MASTER_AMPSS_M0 RPM_ACTIVE_TAG
					 &config_noc SLAVE_SDCC_1 RPM_ACTIVE_TAG>;
			interconnect-names = "sdhc-ddr",
					     "cpu-sdhc";

			power-domains = <&rpmpd RPMPD_VDDCX>;
			operating-points-v2 = <&sdhc1_opp_table>;

			qcom,dll-config = <0x000f642c>;
			qcom,ddr-config = <0x80040868>;

			bus-width = <8>;

			mmc-ddr-1_8v;
			mmc-hs200-1_8v;
			mmc-hs400-1_8v;
			mmc-hs400-enhanced-strobe;

			resets = <&gcc GCC_SDCC1_BCR>;

			status = "disabled";

			sdhc1_opp_table: opp-table {
				compatible = "operating-points-v2";

				opp-100000000 {
					opp-hz = /bits/ 64 <100000000>;
					required-opps = <&rpmpd_opp_low_svs>;
					opp-peak-kBps = <250000 133320>;
					opp-avg-kBps = <104000 0>;
				};

				opp-384000000 {
					opp-hz = /bits/ 64 <384000000>;
					required-opps = <&rpmpd_opp_nom>;
					opp-peak-kBps = <800000 300000>;
					opp-avg-kBps = <400000 0>;
				};
			};
		};

		gpi_dma0: dma-controller@4a00000 {
			compatible = "qcom,shikra-gpi-dma", "qcom,sm6350-gpi-dma";
			reg = <0x0 0x04a00000 0x0 0x60000>;

			interrupts = <GIC_SPI 511 IRQ_TYPE_LEVEL_HIGH 0>,
				     <GIC_SPI 512 IRQ_TYPE_LEVEL_HIGH 0>,
				     <GIC_SPI 513 IRQ_TYPE_LEVEL_HIGH 0>,
				     <GIC_SPI 514 IRQ_TYPE_LEVEL_HIGH 0>,
				     <GIC_SPI 515 IRQ_TYPE_LEVEL_HIGH 0>,
				     <GIC_SPI 516 IRQ_TYPE_LEVEL_HIGH 0>,
				     <GIC_SPI 517 IRQ_TYPE_LEVEL_HIGH 0>,
				     <GIC_SPI 518 IRQ_TYPE_LEVEL_HIGH 0>,
				     <GIC_SPI 519 IRQ_TYPE_LEVEL_HIGH 0>,
				     <GIC_SPI 520 IRQ_TYPE_LEVEL_HIGH 0>,
				     <GIC_SPI 521 IRQ_TYPE_LEVEL_HIGH 0>,
				     <GIC_SPI 522 IRQ_TYPE_LEVEL_HIGH 0>,
				     <GIC_SPI 523 IRQ_TYPE_LEVEL_HIGH 0>,
				     <GIC_SPI 524 IRQ_TYPE_LEVEL_HIGH 0>,
				     <GIC_SPI 525 IRQ_TYPE_LEVEL_HIGH 0>,
				     <GIC_SPI 526 IRQ_TYPE_LEVEL_HIGH 0>;

			dma-channels = <16>;
			dma-channel-mask = <0xff>;
			#dma-cells = <3>;

			iommus = <&apps_smmu 0xf6 0x0>;
		};

		qupv3_0: geniqup@4ac0000 {
			compatible = "qcom,geni-se-qup";
			reg = <0x0 0x04ac0000 0x0 0x2000>;

			clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>,
				 <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>;
			clock-names = "m-ahb",
				      "s-ahb";

			iommus = <&apps_smmu 0xe3 0x0>;

			#address-cells = <2>;
			#size-cells = <2>;
			ranges;

			status = "disabled";

			i2c0: i2c@4a80000 {
				compatible = "qcom,geni-i2c";
				reg = <0x0 0x4a80000 0x0 0x4000>;

				interrupts = <GIC_SPI 527 IRQ_TYPE_LEVEL_HIGH 0>;

				clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
				clock-names = "se";

				interconnects = <&clk_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
						 &clk_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
						<&mem_noc MASTER_AMPSS_M0 RPM_ALWAYS_TAG
						 &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>,
						<&system_noc MASTER_QUP_0 RPM_ALWAYS_TAG
						 &mc_virt SLAVE_EBI_CH0 RPM_ALWAYS_TAG>;
				interconnect-names = "qup-core",
						     "qup-config",
						     "qup-memory";

				dmas = <&gpi_dma0 0 0 QCOM_GPI_I2C>,
				       <&gpi_dma0 1 0 QCOM_GPI_I2C>;
				dma-names = "tx", "rx";

				pinctrl-0 = <&qup_i2c0_data_clk>;
				pinctrl-names = "default";

				#address-cells = <1>;
				#size-cells = <0>;

				status = "disabled";
			};

			spi0: spi@4a80000 {
				compatible = "qcom,geni-spi";
				reg = <0x0 0x4a80000 0x0 0x4000>;

				interrupts = <GIC_SPI 527 IRQ_TYPE_LEVEL_HIGH 0>;

				clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
				clock-names = "se";

				interconnects = <&clk_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
						 &clk_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
						<&mem_noc MASTER_AMPSS_M0 RPM_ALWAYS_TAG
						 &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>;
				interconnect-names = "qup-core",
						     "qup-config";

				dmas = <&gpi_dma0 0 0 QCOM_GPI_SPI>,
				       <&gpi_dma0 1 0 QCOM_GPI_SPI>;
				dma-names = "tx", "rx";

				pinctrl-0 = <&qup_spi0_data_clk>, <&qup_spi0_cs>;
				pinctrl-names = "default";

				#address-cells = <1>;
				#size-cells = <0>;

				status = "disabled";
			};

			uart0: serial@4a80000 {
				compatible = "qcom,geni-debug-uart";
				reg = <0x0 0x04a80000 0x0 0x4000>;

				interrupts = <GIC_SPI 527 IRQ_TYPE_LEVEL_HIGH 0>;

				clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
				clock-names = "se";

				interconnects = <&clk_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
						 &clk_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
						<&mem_noc MASTER_AMPSS_M0 RPM_ALWAYS_TAG
						 &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>;
				interconnect-names = "qup-core",
						     "qup-config";

				pinctrl-0 = <&qup_uart0_default>;
				pinctrl-names = "default";

				status = "disabled";
			};

			i2c1: i2c@4a84000 {
				compatible = "qcom,geni-i2c";
				reg = <0x0 0x4a84000 0x0 0x4000>;

				interrupts = <GIC_SPI 528 IRQ_TYPE_LEVEL_HIGH 0>;

				clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
				clock-names = "se";

				interconnects = <&clk_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
						 &clk_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
						<&mem_noc MASTER_AMPSS_M0 RPM_ALWAYS_TAG
						 &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>,
						<&system_noc MASTER_QUP_0 RPM_ALWAYS_TAG
						 &mc_virt SLAVE_EBI_CH0 RPM_ALWAYS_TAG>;
				interconnect-names = "qup-core",
						     "qup-config",
						     "qup-memory";

				dmas = <&gpi_dma0 0 1 QCOM_GPI_I2C>,
				       <&gpi_dma0 1 1 QCOM_GPI_I2C>;
				dma-names = "tx", "rx";

				pinctrl-0 = <&qup_i2c1_data_clk>;
				pinctrl-names = "default";

				#address-cells = <1>;
				#size-cells = <0>;

				status = "disabled";
			};

			uart1: serial@4a84000 {
				compatible = "qcom,geni-uart";
				reg = <0x0 0x04a84000 0x0 0x4000>;

				interrupts = <GIC_SPI 528 IRQ_TYPE_LEVEL_HIGH 0>;

				clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
				clock-names = "se";

				interconnects = <&clk_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
						 &clk_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
						<&mem_noc MASTER_AMPSS_M0 RPM_ALWAYS_TAG
						 &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>;
				interconnect-names = "qup-core",
						     "qup-config";

				pinctrl-0 = <&qup_uart1_default>;
				pinctrl-names = "default";

				status = "disabled";
			};

			i2c2: i2c@4a88000 {
				compatible = "qcom,geni-i2c";
				reg = <0x0 0x4a88000 0x0 0x4000>;

				interrupts = <GIC_SPI 529 IRQ_TYPE_LEVEL_HIGH 0>;

				clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
				clock-names = "se";

				interconnects = <&clk_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
						 &clk_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
						<&mem_noc MASTER_AMPSS_M0 RPM_ALWAYS_TAG
						 &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>,
						<&system_noc MASTER_QUP_0 RPM_ALWAYS_TAG
						 &mc_virt SLAVE_EBI_CH0 RPM_ALWAYS_TAG>;
				interconnect-names = "qup-core",
						     "qup-config",
						     "qup-memory";

				pinctrl-0 = <&qup_i2c2_data_clk>;
				pinctrl-names = "default";

				dmas = <&gpi_dma0 0 2 QCOM_GPI_I2C>,
				       <&gpi_dma0 1 2 QCOM_GPI_I2C>;
				dma-names = "tx", "rx";

				#address-cells = <1>;
				#size-cells = <0>;

				status = "disabled";
			};

			spi2: spi@4a88000 {
				compatible = "qcom,geni-spi";
				reg = <0x0 0x4a88000 0x0 0x4000>;

				interrupts = <GIC_SPI 529 IRQ_TYPE_LEVEL_HIGH 0>;

				clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
				clock-names = "se";

				interconnects = <&clk_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
						 &clk_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
						<&mem_noc MASTER_AMPSS_M0 RPM_ALWAYS_TAG
						 &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>;
				interconnect-names = "qup-core",
						     "qup-config";

				dmas = <&gpi_dma0 0 2 QCOM_GPI_SPI>,
				       <&gpi_dma0 1 2 QCOM_GPI_SPI>;
				dma-names = "tx", "rx";

				pinctrl-0 = <&qup_spi2_data_clk>, <&qup_spi2_cs>;
				pinctrl-names = "default";

				#address-cells = <1>;
				#size-cells = <0>;

				status = "disabled";
			};

			uart2: serial@4a88000 {
				compatible = "qcom,geni-uart";
				reg = <0x0 0x04a88000 0x0 0x4000>;

				interrupts-extended = <&intc GIC_SPI 529 IRQ_TYPE_LEVEL_HIGH 0>,
						      <&tlmm 9 IRQ_TYPE_LEVEL_HIGH>;

				clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
				clock-names = "se";

				interconnects = <&clk_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
						 &clk_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
						<&mem_noc MASTER_AMPSS_M0 RPM_ALWAYS_TAG
						 &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>;
				interconnect-names = "qup-core",
						     "qup-config";

				pinctrl-0 = <&qup_uart2_default>, <&qup_uart2_cts_rts>;
				pinctrl-names = "default";

				status = "disabled";
			};

			i2c3: i2c@4a8c000 {
				compatible = "qcom,geni-i2c";
				reg = <0x0 0x4a8c000 0x0 0x4000>;

				interrupts = <GIC_SPI 530 IRQ_TYPE_LEVEL_HIGH 0>;

				clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
				clock-names = "se";

				interconnects = <&clk_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
						 &clk_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
						<&mem_noc MASTER_AMPSS_M0 RPM_ALWAYS_TAG
						 &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>,
						<&system_noc MASTER_QUP_0 RPM_ALWAYS_TAG
						 &mc_virt SLAVE_EBI_CH0 RPM_ALWAYS_TAG>;
				interconnect-names = "qup-core",
						     "qup-config",
						     "qup-memory";

				dmas = <&gpi_dma0 0 3 QCOM_GPI_I2C>,
				       <&gpi_dma0 1 3 QCOM_GPI_I2C>;
				dma-names = "tx", "rx";

				pinctrl-0 = <&qup_i2c3_data_clk>;
				pinctrl-names = "default";

				#address-cells = <1>;
				#size-cells = <0>;

				status = "disabled";
			};

			uart3: serial@4a8c000 {
				compatible = "qcom,geni-uart";
				reg = <0x0 0x04a8c000 0x0 0x4000>;

				interrupts = <GIC_SPI 530 IRQ_TYPE_LEVEL_HIGH 0>;

				clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
				clock-names = "se";

				interconnects = <&clk_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
						 &clk_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
						<&mem_noc MASTER_AMPSS_M0 RPM_ALWAYS_TAG
						 &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>;
				interconnect-names = "qup-core",
						     "qup-config";

				pinctrl-0 = <&qup_uart3_default>;
				pinctrl-names = "default";

				status = "disabled";
			};

			i2c4: i2c@4a90000 {
				compatible = "qcom,geni-i2c";
				reg = <0x0 0x4a90000 0x0 0x4000>;

				interrupts = <GIC_SPI 531 IRQ_TYPE_LEVEL_HIGH 0>;

				clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
				clock-names = "se";

				interconnects = <&clk_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
						 &clk_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
						<&mem_noc MASTER_AMPSS_M0 RPM_ALWAYS_TAG
						 &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>,
						<&system_noc MASTER_QUP_0 RPM_ALWAYS_TAG
						 &mc_virt SLAVE_EBI_CH0 RPM_ALWAYS_TAG>;
				interconnect-names = "qup-core",
						     "qup-config",
						     "qup-memory";

				dmas = <&gpi_dma0 0 4 QCOM_GPI_I2C>,
				       <&gpi_dma0 1 4 QCOM_GPI_I2C>;
				dma-names = "tx", "rx";

				pinctrl-0 = <&qup_i2c4_data_clk>;
				pinctrl-names = "default";

				#address-cells = <1>;
				#size-cells = <0>;

				status = "disabled";
			};

			uart4: serial@4a90000 {
				compatible = "qcom,geni-uart";
				reg = <0x0 0x04a90000 0x0 0x4000>;

				interrupts = <GIC_SPI 531 IRQ_TYPE_LEVEL_HIGH 0>;

				clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
				clock-names = "se";

				interconnects = <&clk_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
						 &clk_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
						<&mem_noc MASTER_AMPSS_M0 RPM_ALWAYS_TAG
						 &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>;
				interconnect-names = "qup-core",
						     "qup-config";

				pinctrl-0 = <&qup_uart4_default>;
				pinctrl-names = "default";

				status = "disabled";
			};

			i2c5: i2c@4a94000 {
				compatible = "qcom,geni-i2c";
				reg = <0x0 0x4a94000 0x0 0x4000>;

				interrupts = <GIC_SPI 532 IRQ_TYPE_LEVEL_HIGH 0>;

				clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
				clock-names = "se";

				interconnects = <&clk_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
						 &clk_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
						<&mem_noc MASTER_AMPSS_M0 RPM_ALWAYS_TAG
						 &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>,
						<&system_noc MASTER_QUP_0 RPM_ALWAYS_TAG
						 &mc_virt SLAVE_EBI_CH0 RPM_ALWAYS_TAG>;
				interconnect-names = "qup-core",
						     "qup-config",
						     "qup-memory";

				dmas = <&gpi_dma0 0 5 QCOM_GPI_I2C>,
				       <&gpi_dma0 1 5 QCOM_GPI_I2C>;
				dma-names = "tx", "rx";

				pinctrl-0 = <&qup_i2c5_data_clk>;
				pinctrl-names = "default";

				#address-cells = <1>;
				#size-cells = <0>;

				status = "disabled";
			};

			spi5: spi@4a94000 {
				compatible = "qcom,geni-spi";
				reg = <0x0 0x4a94000 0x0 0x4000>;

				interrupts = <GIC_SPI 532 IRQ_TYPE_LEVEL_HIGH 0>;

				clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
				clock-names = "se";

				interconnects = <&clk_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
						 &clk_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
						<&mem_noc MASTER_AMPSS_M0 RPM_ALWAYS_TAG
						 &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>;
				interconnect-names = "qup-core",
						     "qup-config";

				dmas = <&gpi_dma0 0 5 QCOM_GPI_SPI>,
				       <&gpi_dma0 1 5 QCOM_GPI_SPI>;
				dma-names = "tx", "rx";

				pinctrl-0 = <&qup_spi5_data_clk>, <&qup_spi5_cs>;
				pinctrl-names = "default";

				#address-cells = <1>;
				#size-cells = <0>;

				status = "disabled";
			};

			uart5: serial@4a94000 {
				compatible = "qcom,geni-uart";
				reg = <0x0 0x04a94000 0x0 0x4000>;

				interrupts = <GIC_SPI 532 IRQ_TYPE_LEVEL_HIGH 0>;

				clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
				clock-names = "se";

				interconnects = <&clk_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
						 &clk_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
						<&mem_noc MASTER_AMPSS_M0 RPM_ALWAYS_TAG
						 &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>;
				interconnect-names = "qup-core",
						     "qup-config";

				pinctrl-0 = <&qup_uart5_default>, <&qup_uart5_cts_rts>;
				pinctrl-names = "default";

				status = "disabled";
			};

			i2c6: i2c@4a98000 {
				compatible = "qcom,geni-i2c";
				reg = <0x0 0x4a98000 0x0 0x4000>;

				interrupts = <GIC_SPI 533 IRQ_TYPE_LEVEL_HIGH 0>;

				clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>;
				clock-names = "se";

				interconnects = <&clk_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
						 &clk_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
						<&mem_noc MASTER_AMPSS_M0 RPM_ALWAYS_TAG
						 &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>,
						<&system_noc MASTER_QUP_0 RPM_ALWAYS_TAG
						 &mc_virt SLAVE_EBI_CH0 RPM_ALWAYS_TAG>;
				interconnect-names = "qup-core",
						     "qup-config",
						     "qup-memory";

				dmas = <&gpi_dma0 0 6 QCOM_GPI_I2C>,
				       <&gpi_dma0 1 6 QCOM_GPI_I2C>;
				dma-names = "tx", "rx";

				pinctrl-0 = <&qup_i2c6_data_clk>;
				pinctrl-names = "default";

				#address-cells = <1>;
				#size-cells = <0>;

				status = "disabled";
			};

			spi6: spi@4a98000 {
				compatible = "qcom,geni-spi";
				reg = <0x0 0x4a98000 0x0 0x4000>;

				interrupts = <GIC_SPI 533 IRQ_TYPE_LEVEL_HIGH 0>;

				clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>;
				clock-names = "se";

				interconnects =	<&clk_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
						 &clk_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
						<&mem_noc MASTER_AMPSS_M0 RPM_ALWAYS_TAG
						 &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>;
				interconnect-names = "qup-core",
						     "qup-config";

				dmas = <&gpi_dma0 0 6 QCOM_GPI_SPI>,
				       <&gpi_dma0 1 6 QCOM_GPI_SPI>;
				dma-names = "tx", "rx";

				pinctrl-0 = <&qup_spi6_data_clk>, <&qup_spi6_cs>;
				pinctrl-names = "default";

				#address-cells = <1>;
				#size-cells = <0>;

				status = "disabled";
			};

			uart6: serial@4a98000 {
				compatible = "qcom,geni-uart";
				reg = <0x0 0x04a98000 0x0 0x4000>;

				interrupts = <GIC_SPI 533 IRQ_TYPE_LEVEL_HIGH 0>;

				clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>;
				clock-names = "se";

				interconnects = <&clk_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
						 &clk_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
						<&mem_noc MASTER_AMPSS_M0 RPM_ALWAYS_TAG
						 &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>;
				interconnect-names = "qup-core",
						     "qup-config";

				pinctrl-0 = <&qup_uart6_default>, <&qup_uart6_cts_rts>;
				pinctrl-names = "default";

				status = "disabled";
			};

			i2c7: i2c@4a9c000 {
				compatible = "qcom,geni-i2c";
				reg = <0x0 0x4a9c000 0x0 0x4000>;

				interrupts = <GIC_SPI 534 IRQ_TYPE_LEVEL_HIGH 0>;

				clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>;
				clock-names = "se";

				interconnects = <&clk_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
						 &clk_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
						<&mem_noc MASTER_AMPSS_M0 RPM_ALWAYS_TAG
						 &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>,
						<&system_noc MASTER_QUP_0 RPM_ALWAYS_TAG
						 &mc_virt SLAVE_EBI_CH0 RPM_ALWAYS_TAG>;
				interconnect-names = "qup-core",
						     "qup-config",
						     "qup-memory";

				dmas = <&gpi_dma0 0 7 QCOM_GPI_I2C>,
				       <&gpi_dma0 1 7 QCOM_GPI_I2C>;
				dma-names = "tx", "rx";

				pinctrl-0 = <&qup_i2c7_data_clk>;
				pinctrl-names = "default";

				#address-cells = <1>;
				#size-cells = <0>;

				status = "disabled";
			};

			uart7: serial@4a9c000 {
				compatible = "qcom,geni-uart";
				reg = <0x0 0x04a9c000 0x0 0x4000>;

				interrupts = <GIC_SPI 534 IRQ_TYPE_LEVEL_HIGH 0>;

				clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>;
				clock-names = "se";

				interconnects = <&clk_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
						 &clk_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
						<&mem_noc MASTER_AMPSS_M0 RPM_ALWAYS_TAG
						 &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>;
				interconnect-names = "qup-core",
						     "qup-config";

				pinctrl-0 = <&qup_uart7_default>;
				pinctrl-names = "default";

				status = "disabled";
			};

			i2c8: i2c@4aa0000 {
				compatible = "qcom,geni-i2c";
				reg = <0x0 0x4aa0000 0x0 0x4000>;

				interrupts = <GIC_SPI 535 IRQ_TYPE_LEVEL_HIGH 0>;

				clocks = <&gcc GCC_QUPV3_WRAP0_S8_CLK>;
				clock-names = "se";

				interconnects = <&clk_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
						 &clk_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
						<&mem_noc MASTER_AMPSS_M0 RPM_ALWAYS_TAG
						 &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>,
						<&system_noc MASTER_QUP_0 RPM_ALWAYS_TAG
						 &mc_virt SLAVE_EBI_CH0 RPM_ALWAYS_TAG>;
				interconnect-names = "qup-core",
						     "qup-config",
						     "qup-memory";

				dmas = <&gpi_dma0 0 8 QCOM_GPI_I2C>,
				       <&gpi_dma0 1 8 QCOM_GPI_I2C>;
				dma-names = "tx", "rx";

				pinctrl-0 = <&qup_i2c8_data_clk>;
				pinctrl-names = "default";

				#address-cells = <1>;
				#size-cells = <0>;

				status = "disabled";
			};

			spi8: spi@4aa0000 {
				compatible = "qcom,geni-spi";
				reg = <0x0 0x4aa0000 0x0 0x4000>;

				interrupts = <GIC_SPI 535 IRQ_TYPE_LEVEL_HIGH 0>;

				clocks = <&gcc GCC_QUPV3_WRAP0_S8_CLK>;
				clock-names = "se";

				interconnects =	<&clk_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
						 &clk_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
						<&mem_noc MASTER_AMPSS_M0 RPM_ALWAYS_TAG
						 &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>;
				interconnect-names = "qup-core",
						     "qup-config";

				dmas = <&gpi_dma0 0 8 QCOM_GPI_SPI>,
				       <&gpi_dma0 1 8 QCOM_GPI_SPI>;
				dma-names = "tx", "rx";

				pinctrl-0 = <&qup_spi8_data_clk>, <&qup_spi8_cs>;
				pinctrl-names = "default";

				#address-cells = <1>;
				#size-cells = <0>;

				status = "disabled";
			};

			uart8: serial@4aa0000 {
				compatible = "qcom,geni-uart";
				reg = <0x0 0x04aa0000 0x0 0x4000>;

				interrupts = <GIC_SPI 535 IRQ_TYPE_LEVEL_HIGH 0>;

				clocks = <&gcc GCC_QUPV3_WRAP0_S8_CLK>;
				clock-names = "se";

				interconnects = <&clk_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
						 &clk_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
						<&mem_noc MASTER_AMPSS_M0 RPM_ALWAYS_TAG
						 &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>;
				interconnect-names = "qup-core",
						     "qup-config";

				pinctrl-0 = <&qup_uart8_default>, <&qup_uart8_cts_rts>;
				pinctrl-names = "default";

				status = "disabled";
			};

			i2c9: i2c@4aa4000 {
				compatible = "qcom,geni-i2c";
				reg = <0x0 0x4aa4000 0x0 0x4000>;

				interrupts = <GIC_SPI 536 IRQ_TYPE_LEVEL_HIGH 0>;

				clocks = <&gcc GCC_QUPV3_WRAP0_S9_CLK>;
				clock-names = "se";

				interconnects = <&clk_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
						 &clk_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
						<&mem_noc MASTER_AMPSS_M0 RPM_ALWAYS_TAG
						 &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>,
						<&system_noc MASTER_QUP_0 RPM_ALWAYS_TAG
						 &mc_virt SLAVE_EBI_CH0 RPM_ALWAYS_TAG>;
				interconnect-names = "qup-core",
						     "qup-config",
						     "qup-memory";

				dmas = <&gpi_dma0 0 9 QCOM_GPI_I2C>,
				       <&gpi_dma0 1 9 QCOM_GPI_I2C>;
				dma-names = "tx", "rx";

				pinctrl-0 = <&qup_i2c9_data_clk>;
				pinctrl-names = "default";

				#address-cells = <1>;
				#size-cells = <0>;

				status = "disabled";
			};

			uart9: serial@4aa4000 {
				compatible = "qcom,geni-uart";
				reg = <0x0 0x04aa4000 0x0 0x4000>;

				interrupts = <GIC_SPI 536 IRQ_TYPE_LEVEL_HIGH 0>;

				clocks = <&gcc GCC_QUPV3_WRAP0_S9_CLK>;
				clock-names = "se";

				interconnects = <&clk_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
						 &clk_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
						<&mem_noc MASTER_AMPSS_M0 RPM_ALWAYS_TAG
						 &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>;
				interconnect-names = "qup-core",
						     "qup-config";

				pinctrl-0 = <&qup_uart9_default>;
				pinctrl-names = "default";

				status = "disabled";
			};
		};

		remoteproc_mpss: remoteproc@6080000 {
			compatible = "qcom,shikra-mpss-pas";
			reg = <0x0 0x06080000 0x0 0x100>;

			interrupts-extended = <&intc GIC_SPI 307 IRQ_TYPE_EDGE_RISING 0>,
					      <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
					      <&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
					      <&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
					      <&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>,
					      <&modem_smp2p_in 7 IRQ_TYPE_EDGE_RISING>;
			interrupt-names = "wdog",
					  "fatal",
					  "ready",
					  "handover",
					  "stop-ack",
					  "shutdown-ack";

			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>;
			clock-names = "xo";

			interconnects = <&mem_noc MASTER_AMPSS_M0 RPM_ALWAYS_TAG
					 &mc_virt SLAVE_EBI_CH0 RPM_ALWAYS_TAG>;

			power-domains = <&rpmpd RPMHPD_CX>;

			memory-region = <&mpss_wlan_mem>;

			qcom,smem-states = <&modem_smp2p_out 0>;
			qcom,smem-state-names = "stop";

			status = "disabled";

			glink-edge {
				interrupts = <GIC_SPI 68 IRQ_TYPE_EDGE_RISING 0>;
				mboxes = <&apcs_glb 12>;
				qcom,remote-pid = <1>;
				label = "mpss";
			};
		};

		remoteproc_cdsp: remoteproc@b300000 {
			compatible = "qcom,shikra-cdsp-pas";
			reg = <0x0 0x0b300000 0x0 0x100000>;

			interrupts-extended = <&intc GIC_SPI 265 IRQ_TYPE_EDGE_RISING 0>,
					      <&cdsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
					      <&cdsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
					      <&cdsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
					      <&cdsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>,
					      <&cdsp_smp2p_in 7 IRQ_TYPE_EDGE_RISING>;
			interrupt-names = "wdog",
					  "fatal",
					  "ready",
					  "handover",
					  "stop-ack",
					  "shutdown-ack";

			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>;
			clock-names = "xo";

			interconnects = <&mem_noc MASTER_AMPSS_M0 RPM_ALWAYS_TAG
					 &mc_virt SLAVE_EBI_CH0 RPM_ALWAYS_TAG>;

			power-domains = <&rpmpd RPMHPD_CX>;

			memory-region = <&cdsp_mem>;

			qcom,smem-states = <&cdsp_smp2p_out 0>;
			qcom,smem-state-names = "stop";

			status = "disabled";

			glink-edge {
				interrupts = <GIC_SPI 261 IRQ_TYPE_EDGE_RISING 0>;
				mboxes = <&apcs_glb 4>;
				qcom,remote-pid = <5>;
				label = "cdsp";

				fastrpc {
					compatible = "qcom,fastrpc";
					#address-cells = <1>;
					#size-cells = <0>;
					label = "cdsp";
					qcom,glink-channels = "fastrpcglink-apps-dsp";

					compute-cb@1 {
						compatible = "qcom,fastrpc-compute-cb";
						reg = <1>;
						iommus = <&apps_smmu 0x0201 0x0000>;
					};

					compute-cb@2 {
						compatible = "qcom,fastrpc-compute-cb";
						reg = <2>;
						iommus = <&apps_smmu 0x0202 0x0000>;
					};

					compute-cb@3 {
						compatible = "qcom,fastrpc-compute-cb";
						reg = <3>;
						iommus = <&apps_smmu 0x0203 0x0000>;
					};

					compute-cb@4 {
						compatible = "qcom,fastrpc-compute-cb";
						reg = <4>;
						iommus = <&apps_smmu 0x0204 0x0000>;
					};

					compute-cb@5 {
						compatible = "qcom,fastrpc-compute-cb";
						reg = <5>;
						iommus = <&apps_smmu 0x0205 0x0000>;
					};

					compute-cb@6 {
						compatible = "qcom,fastrpc-compute-cb";
						reg = <6>;
						iommus = <&apps_smmu 0x0206 0x0000>;
					};

					compute-cb@9 {
						compatible = "qcom,fastrpc-compute-cb";
						reg = <9>;
						iommus = <&apps_smmu 0x0209 0x0000>;
					};
				};
			};
		};

		remoteproc_lpaicp: remoteproc@b800000 {
			compatible = "qcom,shikra-lpaicp-pas";
			reg = <0x0 0x0b800000 0x0 0x200000>;

			interrupts-extended = <&intc GIC_SPI 257 IRQ_TYPE_EDGE_RISING 0>,
					      <&lmcu_smp2p_in 0 IRQ_TYPE_NONE>,
					      <&lmcu_smp2p_in 1 IRQ_TYPE_NONE>,
					      <&lmcu_smp2p_in 2 IRQ_TYPE_NONE>,
					      <&lmcu_smp2p_in 3 IRQ_TYPE_NONE>;

			interrupt-names = "wdog",
					  "fatal",
					  "ready",
					  "handover",
					  "stop-ack";

			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>;
			clock-names = "xo";

			memory-region = <&lmcu_mem &lmcu_dtb_mem>;

			qcom,smem-states = <&lmcu_smp2p_out 0>;
			qcom,smem-state-names = "stop";

			status = "disabled";

			glink-edge {
				interrupts = <GIC_SPI 286 IRQ_TYPE_EDGE_RISING 0>;
				mboxes = <&apcs_glb 9>;
				qcom,remote-pid = <26>;
				label = "lpaicp";
			};
		};

		gpucc: clock-controller@5990000 {
			compatible = "qcom,shikra-gpucc";
			reg = <0x0 0x05990000 0x0 0x9000>;
			clocks = <&gcc GCC_GPU_CFG_AHB_CLK>,
				 <&rpmcc RPM_SMD_XO_CLK_SRC>,
				 <&gcc GCC_GPU_GPLL0_CLK_SRC>,
				 <&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>;
			power-domains = <&rpmpd RPMPD_VDDCX>;
			#clock-cells = <1>;
			#reset-cells = <1>;
			#power-domain-cells = <1>;
		};

		dispcc: clock-controller@5f00000 {
			compatible = "qcom,shikra-dispcc", "qcom,qcm2290-dispcc";
			reg = <0x0 0x05f00000 0x0 0x20000>;
			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
				 <&rpmcc RPM_SMD_XO_A_CLK_SRC>,
				 <&gcc GCC_DISP_GPLL0_CLK_SRC>,
				 <&gcc GCC_DISP_GPLL0_DIV_CLK_SRC>,
				 <0>,
				 <0>;
			clock-names = "bi_tcxo",
				      "bi_tcxo_ao",
				      "gcc_disp_gpll0_clk_src",
				      "gcc_disp_gpll0_div_clk_src",
				      "dsi0_phy_pll_out_byteclk",
				      "dsi0_phy_pll_out_dsiclk";
			power-domains = <&rpmpd RPMPD_VDDCX>;
			#clock-cells = <1>;
			#reset-cells = <1>;
			#power-domain-cells = <1>;
		};

		sram@c11e000 {
			compatible = "qcom,shikra-imem", "mmio-sram";
			reg = <0x0 0x0c11e000 0x0 0x1000>;
			ranges = <0x0 0x0 0x0c11e000 0x1000>;

			no-memory-wc;

			#address-cells = <1>;
			#size-cells = <1>;

			pil-sram@94c {
				compatible = "qcom,pil-reloc-info";
				reg = <0x94c 0xc8>;
			};
		};

		apps_smmu: iommu@c600000 {
			compatible = "qcom,shikra-smmu-500", "qcom,smmu-500", "arm,mmu-500";
			reg = <0x0 0x0c600000 0x0 0x80000>;
			#iommu-cells = <2>;
			#global-interrupts = <1>;

			interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH 0>,
				     <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH 0>,
				     <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH 0>,
				     <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH 0>,
				     <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH 0>,
				     <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH 0>,
				     <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH 0>,
				     <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH 0>,
				     <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH 0>,
				     <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH 0>,
				     <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH 0>,
				     <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH 0>,
				     <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH 0>,
				     <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH 0>,
				     <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH 0>,
				     <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH 0>,
				     <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH 0>,
				     <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH 0>,
				     <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH 0>,
				     <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH 0>,
				     <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH 0>,
				     <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH 0>,
				     <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH 0>,
				     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH 0>,
				     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH 0>,
				     <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH 0>,
				     <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH 0>,
				     <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH 0>,
				     <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH 0>,
				     <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH 0>,
				     <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH 0>,
				     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH 0>,
				     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH 0>,
				     <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH 0>,
				     <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH 0>,
				     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH 0>,
				     <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH 0>,
				     <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH 0>,
				     <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH 0>,
				     <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH 0>,
				     <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH 0>,
				     <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH 0>,
				     <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH 0>,
				     <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH 0>,
				     <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH 0>,
				     <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH 0>,
				     <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH 0>,
				     <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH 0>,
				     <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH 0>,
				     <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH 0>,
				     <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH 0>,
				     <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH 0>,
				     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH 0>,
				     <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH 0>,
				     <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH 0>,
				     <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH 0>,
				     <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH 0>,
				     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH 0>,
				     <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH 0>,
				     <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH 0>,
				     <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH 0>,
				     <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH 0>,
				     <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH 0>,
				     <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH 0>,
				     <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH 0>;
		};

		wifi: wifi@c800000 {
			compatible = "qcom,wcn3990-wifi";
			reg = <0x0 0x0c800000 0x0 0x800000>;
			reg-names = "membase";
			memory-region = <&wlan_mem>;
			interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH 0>,
				     <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH 0>,
				     <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH 0>,
				     <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH 0>,
				     <GIC_SPI 362 IRQ_TYPE_LEVEL_HIGH 0>,
				     <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH 0>,
				     <GIC_SPI 364 IRQ_TYPE_LEVEL_HIGH 0>,
				     <GIC_SPI 365 IRQ_TYPE_LEVEL_HIGH 0>,
				     <GIC_SPI 366 IRQ_TYPE_LEVEL_HIGH 0>,
				     <GIC_SPI 367 IRQ_TYPE_LEVEL_HIGH 0>,
				     <GIC_SPI 368 IRQ_TYPE_LEVEL_HIGH 0>,
				     <GIC_SPI 369 IRQ_TYPE_LEVEL_HIGH 0>;
			iommus = <&apps_smmu 0x1a0 0x1>;
			qcom,msa-fixed-perm;

			status = "disabled";
		};

		intc: interrupt-controller@f200000 {
			compatible = "arm,gic-v3";
			reg = <0x0 0xf200000 0x0 0x10000>,
			      <0x0 0xf240000 0x0 0x80000>;

			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH 0>;

			#interrupt-cells = <4>;
			interrupt-controller;

			#redistributor-regions = <1>;
			redistributor-stride = <0x0 0x20000>;

			#address-cells = <2>;
			#size-cells = <2>;
			ranges;

			ppi-partitions {
				ppi_cluster0: interrupt-partition-0 {
					affinity = <&cpu0 &cpu1 &cpu2>;
				};

				ppi_cluster1: interrupt-partition-1 {
					affinity = <&cpu3>;
				};
			};
		};

		apcs_glb: mailbox@f400000 {
			compatible = "qcom,shikra-apss-shared", "qcom,sdm845-apss-shared";
			reg = <0x0 0x0f400000 0x0 0x1000>;
			#mbox-cells = <1>;
		};

		watchdog@f410000 {
			compatible = "qcom,apss-wdt-shikra", "qcom,kpss-wdt";
			reg = <0x0 0x0f410000 0x0 0x1000>;
			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH 0>,
				     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH 0>;
			clocks = <&sleep_clk>;
		};

		timer@f420000 {
			compatible = "arm,armv7-timer-mem";
			reg = <0x0 0x0f420000  0x0 0x1000>;

			#address-cells = <1>;
			#size-cells = <1>;
			ranges = <0x0 0x0 0x0 0x10000000>;

			frame@f421000 {
				reg = <0x0f421000 0x1000>,
				      <0x0f422000 0x1000>;
				frame-number = <0>;
				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH 0>,
					     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH 0>;
			};

			frame@f423000 {
				reg = <0x0f423000 0x1000>;
				frame-number = <1>;
				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH 0>;
				status = "disabled";
			};

			frame@f425000 {
				reg = <0x0f425000 0x1000>;
				frame-number = <2>;
				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH 0>;
				status = "disabled";
			};

			frame@f427000 {
				reg = <0x0f427000 0x1000>;
				frame-number = <3>;
				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH 0>;
				status = "disabled";
			};

			frame@f429000 {
				reg = <0x0f429000 0x1000>;
				frame-number = <4>;
				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH 0>;
				status = "disabled";
			};

			frame@f42b000 {
				reg = <0x0f42b000 0x1000>;
				frame-number = <5>;
				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH 0>;
				status = "disabled";
			};

			frame@f42d000 {
				reg = <0x0f42d000 0x1000>;
				frame-number = <6>;
				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH 0>;
				status = "disabled";
			};
		};

		epss_l3: interconnect@fd90000 {
			compatible = "qcom,shikra-epss-l3";
			reg = <0x0 0x0fd90000 0x0 0x1000>;
			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, <&gcc GPLL0>;
			clock-names = "xo", "alternate";
			#interconnect-cells = <1>;
		};

		cpufreq_hw: cpufreq@fd91000 {
			compatible = "qcom,shikra-epss";
			reg = <0x0 0x0fd91000 0x0 0x1000>,
			      <0x0 0x0fd92000 0x0 0x1000>;
			reg-names = "freq-domain0",
				    "freq-domain1";

			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, <&gcc GPLL0>;
			clock-names = "xo", "alternate";

			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH 0>,
				     <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH 0>;
			interrupt-names = "dcvsh-irq-0",
					  "dcvsh-irq-1";

			#freq-domain-cells = <1>;
			#clock-cells = <1>;
		};
	};

	thermal_zones: thermal-zones {
		aoss0-thermal {
			thermal-sensors = <&tsens0 0>;

			trips {
				trip-point0 {
					temperature = <110000>;
					hysteresis = <5000>;
					type = "hot";
				};

				aoss0-critical {
					temperature = <115000>;
					hysteresis = <0>;
					type = "critical";
				};
			};
		};

		cpu-0-0-thermal {
			thermal-sensors = <&tsens0 1>;

			trips {
				trip-point0 {
					temperature = <110000>;
					hysteresis = <5000>;
					type = "hot";
				};

				cpu00-critical {
					temperature = <115000>;
					hysteresis = <0>;
					type = "critical";
				};
			};
		};

		cpu-0-1-thermal {
			thermal-sensors = <&tsens0 2>;

			trips {
				trip-point0 {
					temperature = <110000>;
					hysteresis = <5000>;
					type = "hot";
				};

				cpu01-critical {
					temperature = <115000>;
					hysteresis = <0>;
					type = "critical";
				};
			};
		};

		cpu-1-0-thermal {
			thermal-sensors = <&tsens0 3>;

			trips {
				trip-point0 {
					temperature = <110000>;
					hysteresis = <5000>;
					type = "hot";
				};

				cpu10-critical {
					temperature = <115000>;
					hysteresis = <0>;
					type = "critical";
				};
			};
		};

		cpu-1-1-thermal {
			thermal-sensors = <&tsens0 4>;

			trips {
				trip-point0 {
					temperature = <110000>;
					hysteresis = <5000>;
					type = "hot";
				};

				cpu11-critical {
					temperature = <115000>;
					hysteresis = <0>;
					type = "critical";
				};
			};
		};

		cpuss0-thermal {
			thermal-sensors = <&tsens0 5>;

			trips {
				trip-point0 {
					temperature = <110000>;
					hysteresis = <5000>;
					type = "hot";
				};

				cpuss0-critical {
					temperature = <115000>;
					hysteresis = <0>;
					type = "critical";
				};
			};
		};

		gpuss-thermal {
			thermal-sensors = <&tsens0 6>;

			trips {
				trip-point0 {
					temperature = <110000>;
					hysteresis = <5000>;
					type = "hot";
				};

				gpuss-critical {
					temperature = <115000>;
					hysteresis = <0>;
					type = "critical";
				};
			};
		};

		nsp-thermal {
			thermal-sensors = <&tsens0 7>;

			trips {
				trip-point0 {
					temperature = <110000>;
					hysteresis = <5000>;
					type = "hot";
				};

				nsp-critical {
					temperature = <115000>;
					hysteresis = <0>;
					type = "critical";
				};
			};
		};

		mdmss0-thermal {
			thermal-sensors = <&tsens0 8>;

			trips {
				trip-point0 {
					temperature = <110000>;
					hysteresis = <5000>;
					type = "hot";
				};

				mdmss0-critical {
					temperature = <115000>;
					hysteresis = <0>;
					type = "critical";
				};
			};
		};

		mdmss1-thermal {
			thermal-sensors = <&tsens0 9>;

			trips {
				trip-point0 {
					temperature = <110000>;
					hysteresis = <5000>;
					type = "hot";
				};

				mdmss1-critical {
					temperature = <115000>;
					hysteresis = <0>;
					type = "critical";
				};
			};
		};

		camera-thermal {
			thermal-sensors = <&tsens0 10>;

			trips {
				trip-point0 {
					temperature = <110000>;
					hysteresis = <5000>;
					type = "hot";
				};

				camera-critical {
					temperature = <115000>;
					hysteresis = <0>;
					type = "critical";
				};
			};
		};

		video-thermal {
			thermal-sensors = <&tsens0 11>;

			trips {
				trip-point0 {
					temperature = <110000>;
					hysteresis = <5000>;
					type = "hot";
				};

				video-critical {
					temperature = <115000>;
					hysteresis = <0>;
					type = "critical";
				};
			};
		};

		cpu-0-2-thermal {
			thermal-sensors = <&tsens0 12>;

			trips {
				trip-point0 {
					temperature = <110000>;
					hysteresis = <5000>;
					type = "hot";
				};

				cpu02-critical {
					temperature = <115000>;
					hysteresis = <0>;
					type = "critical";
				};
			};
		};

		cpuss1-thermal {
			thermal-sensors = <&tsens0 13>;

			trips {
				trip-point0 {
					temperature = <110000>;
					hysteresis = <5000>;
					type = "hot";
				};

				cpuss1-critical {
					temperature = <115000>;
					hysteresis = <0>;
					type = "critical";
				};
			};
		};
	};

	timer {
		compatible = "arm,armv8-timer";

		interrupts = <GIC_PPI 1 IRQ_TYPE_LEVEL_LOW 0>,
			     <GIC_PPI 2 IRQ_TYPE_LEVEL_LOW 0>,
			     <GIC_PPI 3 IRQ_TYPE_LEVEL_LOW 0>,
			     <GIC_PPI 0 IRQ_TYPE_LEVEL_LOW 0>;
	};
};