// SPDX-License-Identifier: BSD-3-Clause
/*
 * Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries.
 */

/dts-v1/;

#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/pwm/pwm.h>
#include <dt-bindings/sound/qcom,q6dsp-lpass-ports.h>

#include "monaco-monza-som.dtsi"

/ {
	model = "Arduino VENTUNO Q";
	compatible = "arduino,monza", "qcom,qcs8300";

	aliases {
		ethernet0 = &ethernet0;
		i2c1 = &i2c1;
		serial0 = &uart7;
		serial1 = &uart10;
	};

	chosen {
		stdout-path = "serial0:115200n8";
	};

	gpio-keys {
		compatible = "gpio-keys";
		pinctrl-0 = <&gpio_keys_default>;
		pinctrl-names = "default";

		button-home {
			label = "Home Key";
			linux,code = <KEY_HOMEPAGE>;
			gpios = <&tlmm 79 GPIO_ACTIVE_LOW>;
			debounce-interval = <60>;
		};
	};

	hdmi-connector {
		compatible = "hdmi-connector";
		label = "hdmi";
		type = "a";

		port {
			hdmi_connector_in: endpoint {
				remote-endpoint = <&adv7535_out>;
			};
		};
	};

	sound {
		compatible = "qcom,qcs8275-sndcard";
		model = "arduino-monza";
		audio-routing = "IN12",  "Headset Mic12",
				"Headset Mic12",  "MICBIAS",
				"IN56",  "Headset Mic56",
				"Headset Mic56",  "MICBIAS",
				"MIC1",  "MICBIAS",
				"Headphone",  "HPL",
				"Headphone",  "HPR",
				"Receiver",  "RCVL",
				"Receiver",  "RCVR",
				"Speaker",  "SPKL",
				"Speaker",  "SPKR";

		pinctrl-0 = <&quad_mi2s_active>, <&quad_mclk_active>,  <&lpi_i2s4_active>;
		pinctrl-names = "default";

		pri-i2s-playback-dai-link {
			link-name = "Analog Playback";

			codec {
				sound-dai = <&max98091>;
			};

			cpu {
				sound-dai = <&q6apmbedai 137>;
			};

			platform {
				sound-dai = <&q6apm>;
			};
		};

		pri-i2s-capture-dai-link {
			link-name = "Analog Capture";

			codec {
				sound-dai = <&max98091>;
			};

			cpu {
				sound-dai = <&q6apmbedai 138>;
			};

			platform {
				sound-dai = <&q6apm>;
			};
		};

		hdmi-mi2s-playback-dai-link {
			link-name = "HDMI Playback";

			codec {
				sound-dai = <&adv7535>;
			};

			cpu {
				sound-dai = <&q6apmbedai 145>;
			};

			platform {
				sound-dai = <&q6apm>;
			};
		};

		displayport-0-dai-link {
			link-name = "DisplayPort0 Playback";

			codec {
				sound-dai = <&mdss_dp0>;
			};

			cpu {
				sound-dai = <&q6apmbedai DISPLAY_PORT_RX_0>;
			};

			platform {
				sound-dai = <&q6apm>;
			};
		};
	};

	vdc_3v3: regulator-3v3 {
		compatible = "regulator-fixed";
		regulator-name = "vdc_3v3";
		regulator-min-microvolt = <3300000>;
		regulator-max-microvolt = <3300000>;
	};

	vdc_1v8: regulator-1v8 {
		compatible = "regulator-fixed";
		regulator-name = "vdc_1v8";
		regulator-min-microvolt = <1800000>;
		regulator-max-microvolt = <1800000>;
	};

	vdc_5v: regulator-5v0 {
		compatible = "regulator-fixed";
		regulator-name = "vdc_5v";
		regulator-min-microvolt = <5000000>;
		regulator-max-microvolt = <5000000>;
		gpio = <&tlmm 49 GPIO_ACTIVE_HIGH>;
		enable-active-high;
		regulator-always-on;
		startup-delay-us = <20000>;
	};

	vreg_nvme: regulator-3p3-m2 {
		compatible = "regulator-fixed";
		regulator-name = "vreg_m2_3p3";
		regulator-min-microvolt = <3300000>;
		regulator-max-microvolt = <3300000>;
		gpio = <&tlmm 51 GPIO_ACTIVE_HIGH>;
		enable-active-high;
		startup-delay-us = <20000>;
	};
};

&cci1 {
	status = "okay";
};

&cci1_i2c1 {
	fan_controller: fan-controller@2f {
		compatible = "microchip,emc2305";
		reg = <0x2f>;
		#address-cells = <1>;
		#size-cells = <0>;
		#pwm-cells = <3>;

		fan: fan@0 {
			reg = <0x0>;
			pwms = <&fan_controller 26000 PWM_POLARITY_INVERTED 1>;
			#cooling-cells = <2>;
		};
	};
};

&ethernet0 {
	phy-mode = "2500base-x";
	phy-handle = <&hsgmii_phy0>;

	pinctrl-0 = <&ethernet0_default>;
	pinctrl-names = "default";

	snps,mtl-rx-config = <&mtl_rx_setup>;
	snps,mtl-tx-config = <&mtl_tx_setup>;

	status = "okay";

	mdio {
		compatible = "snps,dwmac-mdio";
		#address-cells = <1>;
		#size-cells = <0>;

		hsgmii_phy0: ethernet-phy@1c {
			compatible = "ethernet-phy-id004d.d101";
			reg = <0x1c>;
			reset-gpios = <&tlmm 50 GPIO_ACTIVE_LOW>;
			reset-assert-us = <11000>;
			reset-deassert-us = <70000>;
		};
	};

	mtl_rx_setup: rx-queues-config {
		snps,rx-queues-to-use = <4>;
		snps,rx-sched-sp;

		queue0 {
			snps,dcb-algorithm;
			snps,map-to-dma-channel = <0x0>;
			snps,route-up;
			snps,priority = <0x1>;
		};

		queue1 {
			snps,dcb-algorithm;
			snps,map-to-dma-channel = <0x1>;
			snps,route-ptp;
		};

		queue2 {
			snps,avb-algorithm;
			snps,map-to-dma-channel = <0x2>;
			snps,route-avcp;
		};

		queue3 {
			snps,avb-algorithm;
			snps,map-to-dma-channel = <0x3>;
			snps,priority = <0xc>;
		};
	};

	mtl_tx_setup: tx-queues-config {
		snps,tx-queues-to-use = <4>;

		queue0 {
			snps,dcb-algorithm;
		};

		queue1 {
			snps,dcb-algorithm;
		};

		queue2 {
			snps,avb-algorithm;
			snps,send_slope = <0x1000>;
			snps,idle_slope = <0x1000>;
			snps,high_credit = <0x3e800>;
			snps,low_credit = <0xffc18000>;
		};

		queue3 {
			snps,avb-algorithm;
			snps,send_slope = <0x1000>;
			snps,idle_slope = <0x1000>;
			snps,high_credit = <0x3e800>;
			snps,low_credit = <0xffc18000>;
		};
	};
};

&i2c12 {
	clock-frequency = <400000>;

	status = "okay";

	typec@8 {
		compatible = "cypress,cypd4226";
		reg = <0x08>;
		pinctrl-0 = <&typec_default_state>;
		pinctrl-names = "default";
		interrupts-extended = <&tlmm 3 IRQ_TYPE_LEVEL_LOW>;

		#address-cells = <1>;
		#size-cells = <0>;

		connector@0 {
			compatible = "usb-c-connector";
			reg = <0>;
			label = "USB-C";
			data-role = "dual";
			power-role = "dual";

			ports {
				#address-cells = <1>;
				#size-cells = <0>;

				port@0 {
					reg = <0>;

					ucsi_hs_ccg_p0: endpoint {
						remote-endpoint = <&usb_1_dwc3_hs>;
					};
				};

				port@1 {
					reg = <1>;

					ucsi_ss_ccg_p0: endpoint {
						remote-endpoint = <&usb_1_dwc3_ss>;
					};
				};
			};
		};
	};

	max98091: audio-codec@10 {
		compatible = "maxim,max98091";
		reg = <0x10>;
		pinctrl-0 = <&max98091_default>;
		pinctrl-names = "default";
		interrupts-extended = <&tlmm 16 IRQ_TYPE_LEVEL_HIGH>; /* GPIO_16 */
		clocks = <&q6prmcc LPASS_CLK_ID_MCLK_3 LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
		clock-names = "mclk";
		#sound-dai-cells = <0>;
	};

	adv7535: bridge@3d {
		compatible = "adi,adv7535";
		reg = <0x3d>;
		pinctrl-0 = <&adv7535_default>;
		pinctrl-names = "default";
		interrupts-extended = <&tlmm 93 IRQ_TYPE_EDGE_FALLING>;
		avdd-supply = <&vdc_1v8>;
		dvdd-supply = <&vdc_1v8>;
		pvdd-supply = <&vdc_1v8>;
		a2vdd-supply = <&vdc_1v8>;
		v3p3-supply = <&vdc_3v3>;
		v1p2-supply = <&vdc_1v8>;
		adi,dsi-lanes = <4>;
		#sound-dai-cells = <0>;

		ports {
			#address-cells = <1>;
			#size-cells = <0>;

			port@0 {
				reg = <0>;
				adv7535_in: endpoint {
					remote-endpoint = <&mdss_dsi0_out>;
				};
			};

			port@1 {
				reg = <1>;
				adv7535_out: endpoint {
					remote-endpoint = <&hdmi_connector_in>;
				};
			};
		};
	};

	power-sensor@40 {
		compatible = "ti,ina232";
		reg = <0x40>;
		shunt-resistor = <2000>;
	};
};

&mdss {
	status = "okay";
};

&mdss_dp0 {
	status = "okay";
};

&mdss_dp0_out {
	data-lanes = <0 1 2 3>;
	link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
};

&mdss_dp0_phy {
	status = "okay";
};

&mdss_dsi0 {
	status = "okay";
};

&mdss_dsi0_out {
	remote-endpoint = <&adv7535_in>;
	data-lanes = <0 1 2 3>;
};

&mdss_dsi0_phy {
	status = "okay";
};

&pcie0 {
	pinctrl-0 = <&pcie0_default_state>;
	pinctrl-names = "default";

	vddpe-3v3-supply = <&vdc_3v3>;
};

&pcie1 {
	pinctrl-0 = <&pcie1_default_state>;
	pinctrl-names = "default";

	vddpe-3v3-supply = <&vreg_nvme>;
};

&pcieport0 {
	reset-gpios = <&tlmm 2 GPIO_ACTIVE_LOW>;

	pcie@0,0 {
		#address-cells = <3>;
		#size-cells = <2>;
		device_type = "pci";
		bus-range = <0x01 0xff>;
		ranges;
		reg = <0x010000 0x00 0x00 0x00 0x00>;

		pcie@2,0 {
			#address-cells = <3>;
			#size-cells = <2>;
			device_type = "pci";
			bus-range = <0x00 0xff>;
			ranges;
			reg = <0x021000 0x00 0x00 0x00 0x00>;

			usb@0 {
				compatible = "pci104c,8241";
				reg = <0 0 0 0 0>;
				ti,pwron-active-high;
			};
		};
	};
};

&pcieport1 {
	reset-gpios = <&tlmm 23 GPIO_ACTIVE_LOW>;
};

&thermal_zones {
	cpuss-0-0-thermal {
		polling-delay = <2000>;

		trips {
			cpuss0_active: cpuss-active {
				temperature = <32000>;
				hysteresis = <2000>;
				type = "active";
			};
		};

		cooling-maps {
			map-active {
				trip = <&cpuss0_active>;
				cooling-device = <&fan 0 THERMAL_NO_LIMIT>;
			};
		};
	};
};

&tlmm {
	pcie0_default_state: pcie0-default-state {
		wake-pins {
			pins = "gpio0";
			function = "gpio";
			drive-strength = <2>;
			bias-pull-up;
		};

		clkreq-pins {
			pins = "gpio1";
			function = "pcie0_clkreq";
			drive-strength = <2>;
			bias-pull-up;
		};

		perst-pins {
			pins = "gpio2";
			function = "gpio";
			drive-strength = <2>;
			bias-pull-up;
		};
	};

	typec_default_state: typec-default-state {
		pins = "gpio3";
		function = "gpio";
		bias-disable;
	};

	ethernet0_default: ethernet0-default-state {
		ethernet0_mdc: ethernet0-mdc-pins {
			pins = "gpio5";
			function = "emac0_mdc";
			drive-strength = <16>;
			bias-pull-up;
		};

		ethernet0_mdio: ethernet0-mdio-pins {
			pins = "gpio6";
			function = "emac0_mdio";
			drive-strength = <16>;
			bias-pull-up;
		};
	};

	max98091_default: max98091-default-state {
		pins = "gpio16";
		function = "gpio";
		bias-pull-up;
	};

	pcie1_default_state: pcie1-default-state {
		wake-pins {
			pins = "gpio21";
			function = "gpio";
			drive-strength = <2>;
			bias-pull-up;
		};

		clkreq-pins {
			pins = "gpio22";
			function = "pcie1_clkreq";
			drive-strength = <2>;
			bias-pull-up;
		};

		perst-pins {
			pins = "gpio23";
			function = "gpio";
			drive-strength = <2>;
			bias-pull-up;
		};
	};

	gpio_keys_default: gpio-keys-default-state {
		pins = "gpio79";
		function = "gpio";
		bias-disable;
	};

	adv7535_default: adv7535-default-state {
		pins = "gpio93";
		function = "gpio";
		bias-pull-up;
	};
};

&uart7 {
	status = "okay";
};

&uart10 {
	status = "okay";

	bluetooth: bluetooth {
		compatible = "qcom,qca2066-bt";
		enable-gpios = <&tlmm 55 GPIO_ACTIVE_HIGH>;
		clocks = <&sleep_clk>;
	};
};

&usb_1 {
	status = "okay";
};

&usb_1_dwc3_hs {
	remote-endpoint = <&ucsi_hs_ccg_p0>;
};

&usb_1_dwc3_ss {
	remote-endpoint = <&ucsi_ss_ccg_p0>;
};

/* Internally connected to the MCU (e.g. for DFU). */
&usb_2 {
	dr_mode = "host";

	status = "okay";
};