// SPDX-License-Identifier: BSD-3-Clause
/*
 * Copyright (c) 2025, Luca Weiss <luca.weiss@fairphone.com>
 */

/dts-v1/;

#define PMIV0104_SID 7

#include <dt-bindings/leds/common.h>
#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
#include "milos.dtsi"
#include "pm7550.dtsi"
#include "pm8550vs.dtsi"
#include "pmiv0104.dtsi" /* PMIV0108 */
#include "pmk8550.dtsi" /* PMK7635 */
#include "pmr735b.dtsi"

/ {
	model = "The Fairphone (Gen. 6)";
	compatible = "fairphone,fp6", "qcom,milos";
	chassis-type = "handset";

	aliases {
		serial0 = &uart5;
	};

	gpio-keys {
		compatible = "gpio-keys";

		pinctrl-0 = <&volume_up_default>, <&hall_sensor_default>;
		pinctrl-names = "default";

		/* Powered by the always-on vreg_l10b */
		event-hall-sensor {
			label = "Hall Effect Sensor";
			gpios = <&tlmm 70 GPIO_ACTIVE_LOW>;
			linux,input-type = <EV_SW>;
			linux,code = <SW_LID>;
			linux,can-disable;
			wakeup-source;
		};

		key-volume-up {
			label = "Volume Up";
			gpios = <&pm7550_gpios 6 GPIO_ACTIVE_LOW>;
			linux,code = <KEY_VOLUMEUP>;
		};

		switch {
			label = "Switch";
			gpios = <&tlmm 107 GPIO_ACTIVE_HIGH>;
			linux,input-type = <EV_SW>;
			linux,code = <SW_MUTE_DEVICE>;
		};
	};

	pmic-glink {
		compatible = "qcom,milos-pmic-glink",
			     "qcom,sm8550-pmic-glink",
			     "qcom,pmic-glink";
		#address-cells = <1>;
		#size-cells = <0>;
		orientation-gpios = <&tlmm 131 GPIO_ACTIVE_HIGH>;

		connector@0 {
			compatible = "usb-c-connector";
			reg = <0>;

			power-role = "dual";
			data-role = "dual";

			ports {
				#address-cells = <1>;
				#size-cells = <0>;

				port@0 {
					reg = <0>;

					pmic_glink_hs_in: endpoint {
						remote-endpoint = <&usb_1_dwc3_hs>;
					};
				};
			};
		};
	};

	vreg_ff_afvdd_2p8: regulator-ff-afvdd-2p8 {
		compatible = "regulator-fixed";
		regulator-name = "ff_afvdd_2p8";
		regulator-min-microvolt = <2800000>;
		regulator-max-microvolt = <2800000>;
		startup-delay-us = <100>;

		gpio = <&tlmm 93 GPIO_ACTIVE_HIGH>;
		enable-active-high;

		vin-supply = <&vreg_bob>;
	};

	vreg_uw_afvdd_2p8: regulator-uw-afvdd-2p8 {
		compatible = "regulator-fixed";
		regulator-name = "uw_afvdd_2p8";
		regulator-min-microvolt = <2800000>;
		regulator-max-microvolt = <2800000>;
		startup-delay-us = <100>;

		gpio = <&tlmm 23 GPIO_ACTIVE_HIGH>;
		enable-active-high;

		vin-supply = <&vreg_bob>;
	};

	vreg_uw_dvdd: regulator-uw-dvdd {
		compatible = "regulator-fixed";
		regulator-name = "uw_dvdd";
		regulator-min-microvolt = <1200000>;
		regulator-max-microvolt = <1200000>;
		startup-delay-us = <100>;

		gpio = <&tlmm 28 GPIO_ACTIVE_HIGH>;
		enable-active-high;

		vin-supply = <&vreg_s1b>;
	};

	vreg_ois_avdd0_1p8: regulator-ois-avdd0-1p8 {
		compatible = "regulator-fixed";
		regulator-name = "ois_avdd0_1p8";
		regulator-min-microvolt = <1800000>;
		regulator-max-microvolt = <1800000>;
		startup-delay-us = <100>;

		gpio = <&tlmm 27 GPIO_ACTIVE_HIGH>;
		enable-active-high;

		vin-supply = <&vreg_bob>;
	};

	vreg_ois_vdd: regulator-ois-vdd {
		compatible = "regulator-fixed";
		regulator-name = "ois_vdd";
		regulator-min-microvolt = <3300000>;
		regulator-max-microvolt = <3300000>;
		startup-delay-us = <100>;

		gpio = <&tlmm 24 GPIO_ACTIVE_HIGH>;
		enable-active-high;

		vin-supply = <&vph_pwr>;
	};

	vreg_oled_dvdd_1p2: regulator-oled-dvdd-1p2 {
		compatible = "regulator-fixed";
		regulator-name = "oled_dvdd_1p2";
		regulator-min-microvolt = <1200000>;
		regulator-max-microvolt = <1200000>;

		gpio = <&tlmm 54 GPIO_ACTIVE_HIGH>;
		enable-active-high;

		vin-supply = <&vreg_s2b>;

		regulator-boot-on;
	};

	vreg_s1j: regulator-pm3001a-s1j {
		compatible = "regulator-fixed";
		regulator-name = "pm3001a_s1j";
		regulator-min-microvolt = <2200000>;
		regulator-max-microvolt = <2200000>;
		startup-delay-us = <1000>;

		gpio = <&pmr735b_gpios 1 GPIO_ACTIVE_HIGH>;
		enable-active-high;

		vin-supply = <&vph_pwr>;

		pinctrl-0 = <&s1j_enable_default>;
		pinctrl-names = "default";
	};

	vreg_vtof_ldo_3p3: regulator-vtof-ldo-3p3 {
		compatible = "regulator-fixed";
		regulator-name = "vtof_ldo_3p3";
		regulator-min-microvolt = <3300000>;
		regulator-max-microvolt = <3300000>;
		startup-delay-us = <100>;

		gpio = <&tlmm 76 GPIO_ACTIVE_HIGH>;
		enable-active-high;

		vin-supply = <&vph_pwr>;
	};

	vph_pwr: regulator-vph-pwr {
		compatible = "regulator-fixed";

		regulator-name = "vph_pwr";
		regulator-min-microvolt = <3700000>;
		regulator-max-microvolt = <3700000>;

		regulator-always-on;
		regulator-boot-on;
	};

	thermal-zones {
		pm8008-thermal {
			polling-delay-passive = <100>;
			thermal-sensors = <&pm8008>;

			trips {
				trip0 {
					temperature = <95000>;
					hysteresis = <0>;
					type = "passive";
				};

				trip1 {
					temperature = <115000>;
					hysteresis = <0>;
					type = "critical";
				};
			};
		};
	};
};

&apps_rsc {
	regulators-0 {
		compatible = "qcom,pm7550-rpmh-regulators";

		vdd-l1-supply = <&vreg_s1b>;
		vdd-l2-l3-supply = <&vreg_s3b>;
		vdd-l4-l5-supply = <&vreg_s2b>;
		vdd-l6-supply = <&vreg_s2b>;
		vdd-l7-supply = <&vreg_s1b>;
		vdd-l8-supply = <&vreg_s1b>;
		vdd-l9-l10-supply = <&vreg_s1b>;
		vdd-l11-supply = <&vreg_s1b>;
		vdd-l12-l14-supply = <&vreg_bob>;
		vdd-l13-l16-supply = <&vreg_bob>;
		vdd-l15-l17-l18-l19-l20-l21-l22-l23-supply = <&vreg_bob>;
		vdd-s1-supply = <&vph_pwr>;
		vdd-s2-supply = <&vph_pwr>;
		vdd-s3-supply = <&vph_pwr>;
		vdd-s4-supply = <&vph_pwr>;
		vdd-s5-supply = <&vph_pwr>;
		vdd-s6-supply = <&vph_pwr>;

		qcom,pmic-id = "b";

		vreg_s1b: smps1 {
			regulator-name = "vreg_s1b";
			regulator-min-microvolt = <1800000>;
			regulator-max-microvolt = <2080000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_s2b: smps2 {
			regulator-name = "vreg_s2b";
			regulator-min-microvolt = <1256000>;
			regulator-max-microvolt = <1408000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_s3b: smps3 {
			regulator-name = "vreg_s3b";
			regulator-min-microvolt = <880000>;
			regulator-max-microvolt = <1040000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_l2b: ldo2 {
			regulator-name = "vreg_l2b";
			regulator-min-microvolt = <880000>;
			regulator-max-microvolt = <912000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_l3b: ldo3 {
			regulator-name = "vreg_l3b";
			regulator-min-microvolt = <880000>;
			regulator-max-microvolt = <912000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_l4b: ldo4 {
			regulator-name = "vreg_l4b";
			regulator-min-microvolt = <1200000>;
			regulator-max-microvolt = <1200000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_l5b: ldo5 {
			regulator-name = "vreg_l5b";
			regulator-min-microvolt = <1200000>;
			regulator-max-microvolt = <1200000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_l7b: ldo7 {
			regulator-name = "vreg_l7b";
			regulator-min-microvolt = <1800000>;
			regulator-max-microvolt = <1800000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_l8b: ldo8 {
			regulator-name = "vreg_l8b";
			regulator-min-microvolt = <1800000>;
			regulator-max-microvolt = <1800000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_l9b: ldo9 {
			regulator-name = "vreg_l9b";
			regulator-min-microvolt = <1800000>;
			regulator-max-microvolt = <1800000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_l10b: ldo10 {
			regulator-name = "vreg_l10b";
			regulator-min-microvolt = <1800000>;
			regulator-max-microvolt = <1800000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
			/* Hall sensor VDD */
			regulator-always-on;
		};

		vreg_l11b: ldo11 {
			regulator-name = "vreg_l11b";
			regulator-min-microvolt = <1800000>;
			regulator-max-microvolt = <1800000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_l12b: ldo12 {
			regulator-name = "vreg_l12b";
			/*
			 * Skip voltage voting for UFS VCC.
			 */
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_l13b: ldo13 {
			regulator-name = "vreg_l13b";
			regulator-min-microvolt = <2700000>;
			regulator-max-microvolt = <3300000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_l14b: ldo14 {
			regulator-name = "vreg_l14b";
			regulator-min-microvolt = <3300000>;
			regulator-max-microvolt = <3304000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_l15b: ldo15 {
			regulator-name = "vreg_l15b";
			regulator-min-microvolt = <3300000>;
			regulator-max-microvolt = <3304000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_l16b: ldo16 {
			regulator-name = "vreg_l16b";
			regulator-min-microvolt = <3008000>;
			regulator-max-microvolt = <3008000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_l17b: ldo17 {
			regulator-name = "vreg_l17b";
			regulator-min-microvolt = <3104000>;
			regulator-max-microvolt = <3104000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_l18b: ldo18 {
			regulator-name = "vreg_l18b";
			regulator-min-microvolt = <2800000>;
			regulator-max-microvolt = <2800000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_l19b: ldo19 {
			regulator-name = "vreg_l19b";
			regulator-min-microvolt = <3000000>;
			regulator-max-microvolt = <3000000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_l20b: ldo20 {
			regulator-name = "vreg_l20b";
			regulator-min-microvolt = <1620000>;
			regulator-max-microvolt = <3544000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_l21b: ldo21 {
			regulator-name = "vreg_l21b";
			regulator-min-microvolt = <1620000>;
			regulator-max-microvolt = <3544000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_l22b: ldo22 {
			regulator-name = "vreg_l22b";
			regulator-min-microvolt = <3200000>;
			regulator-max-microvolt = <3200000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_l23b: ldo23 {
			regulator-name = "vreg_l23b";
			regulator-min-microvolt = <1650000>;
			regulator-max-microvolt = <3544000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_bob: bob {
			regulator-name = "vreg_bob";
			regulator-min-microvolt = <3008000>;
			regulator-max-microvolt = <3960000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};
	};

	regulators-1 {
		compatible = "qcom,pm8550vs-rpmh-regulators";

		vdd-l1-supply = <&vreg_s3b>;
		vdd-l3-supply = <&vreg_s3b>;

		qcom,pmic-id = "c";

		vreg_l2c: ldo2 {
			regulator-name = "vreg_l2c";
			regulator-min-microvolt = <320000>;
			regulator-max-microvolt = <650000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};
	};

	regulators-2 {
		compatible = "qcom,pmr735b-rpmh-regulators";

		vdd-l1-l2-supply = <&vreg_s3b>;
		vdd-l3-supply = <&vreg_s3b>;
		vdd-l4-supply = <&vreg_s1b>;
		vdd-l5-supply = <&vreg_s2b>;
		vdd-l6-supply = <&vreg_s2b>;
		vdd-l7-l8-supply = <&vreg_s2b>;
		vdd-l9-supply = <&vreg_s3b>;
		vdd-l10-supply = <&vreg_s1b>;
		vdd-l11-supply = <&vreg_s3b>;
		vdd-l12-supply = <&vreg_s3b>;

		qcom,pmic-id = "f";

		vreg_l1f: ldo1 {
			regulator-name = "vreg_l1f";
			regulator-min-microvolt = <852000>;
			regulator-max-microvolt = <950000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_l2f: ldo2 {
			regulator-name = "vreg_l2f";
			regulator-min-microvolt = <751000>;
			regulator-max-microvolt = <824000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_l3f: ldo3 {
			regulator-name = "vreg_l3f";
			regulator-min-microvolt = <650000>;
			regulator-max-microvolt = <880000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_l4f: ldo4 {
			regulator-name = "vreg_l4f";
			regulator-min-microvolt = <1700000>;
			regulator-max-microvolt = <1950000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_l5f: ldo5 {
			regulator-name = "vreg_l5f";
			regulator-min-microvolt = <1140000>;
			regulator-max-microvolt = <1260000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_l6f: ldo6 {
			regulator-name = "vreg_l6f";
			regulator-min-microvolt = <1200000>;
			regulator-max-microvolt = <1200000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_l7f: ldo7 {
			regulator-name = "vreg_l7f";
			regulator-min-microvolt = <1080000>;
			regulator-max-microvolt = <1350000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_l8f: ldo8 {
			regulator-name = "vreg_l8f";
			regulator-min-microvolt = <1100000>;
			regulator-max-microvolt = <1320000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_l9f: ldo9 {
			regulator-name = "vreg_l9f";
			regulator-min-microvolt = <870000>;
			regulator-max-microvolt = <970000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_l10f: ldo10 {
			regulator-name = "vreg_l10f";
			regulator-min-microvolt = <1500000>;
			regulator-max-microvolt = <1800000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_l11f: ldo11 {
			regulator-name = "vreg_l11f";
			regulator-min-microvolt = <320000>;
			regulator-max-microvolt = <864000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};
	};
};

&cci0 {
	status = "okay";
};

&cci0_i2c0 {
	/* Main cam: Sony IMX896 @ 0x1a */

	eeprom@50 {
		compatible = "puya,p24c128f", "atmel,24c128";
		reg = <0x50>;
		vcc-supply = <&vreg_l6p>;
		read-only;
	};

	/* Dongwoon DW9784 VCM/OIS @ 0x72 */
};


&cci0_i2c1 {
	/* Awinic AW86017 VCM @ 0x0c */
	/* UW cam: OmniVision OV13B10 @ 0x36 */

	eeprom@52 {
		compatible = "puya,p24c128f", "atmel,24c128";
		reg = <0x52>;
		vcc-supply = <&vreg_l6p>;
		read-only;
	};
};

&cci1 {
	/* cci1_i2c0 is not used for CCI */
	pinctrl-0 = <&cci1_1_default>;
	pinctrl-1 = <&cci1_1_sleep>;

	status = "okay";
};

&cci1_i2c1 {
	/* Awinic AW86016 VCM @ 0x0c */
	/* Front cam: Samsung S5KKD1 @ 0x3d */

	eeprom@51 {
		compatible = "puya,p24c128f", "atmel,24c128";
		reg = <0x51>;
		vcc-supply = <&vreg_l6p>;
		read-only;
	};
};

&gcc {
	protected-clocks = <GCC_PCIE_1_AUX_CLK>, <GCC_PCIE_1_AUX_CLK_SRC>,
			   <GCC_PCIE_1_CFG_AHB_CLK>, <GCC_PCIE_1_MSTR_AXI_CLK>,
			   <GCC_PCIE_1_PHY_RCHNG_CLK>, <GCC_PCIE_1_PHY_RCHNG_CLK_SRC>,
			   <GCC_PCIE_1_PIPE_CLK>, <GCC_PCIE_1_PIPE_CLK_SRC>,
			   <GCC_PCIE_1_PIPE_DIV2_CLK>, <GCC_PCIE_1_PIPE_DIV2_CLK_SRC>,
			   <GCC_PCIE_1_SLV_AXI_CLK>, <GCC_PCIE_1_SLV_Q2A_AXI_CLK>;
};

&i2c1 {
	/* Samsung NFC @ 0x27 */

	status = "okay";
};

&i2c3 {
	/* AW88261FCR amplifier (top) @ 0x34 */
	/* AW88261FCR amplifier (bottom) @ 0x35 */

	status = "okay";
};

&i2c7 {
	status = "okay";

	pm8008: pmic@8 {
		compatible = "qcom,pm8008";
		reg = <0x8>;

		interrupts-extended = <&tlmm 125 IRQ_TYPE_EDGE_RISING>;
		reset-gpios = <&pmr735b_gpios 3 GPIO_ACTIVE_LOW>;

		vdd-l1-l2-supply = <&vreg_s2b>;
		vdd-l3-l4-supply = <&vreg_bob>;
		vdd-l5-supply = <&vreg_bob>;
		vdd-l6-supply = <&vreg_s1b>;
		vdd-l7-supply = <&vreg_bob>;

		pinctrl-0 = <&pm8008_int_default>, <&pm8008_reset_n_default>;
		pinctrl-names = "default";

		gpio-controller;
		#gpio-cells = <2>;
		gpio-ranges = <&pm8008 0 0 2>;

		interrupt-controller;
		#interrupt-cells = <2>;

		#thermal-sensor-cells = <0>;

		regulators {
			vreg_l1p: ldo1 {
				regulator-name = "vreg_l1p";
				regulator-min-microvolt = <1000000>;
				regulator-max-microvolt = <1200000>;
			};

			vreg_l2p: ldo2 {
				regulator-name = "vreg_l2p";
				regulator-min-microvolt = <950000>;
				regulator-max-microvolt = <1144000>;
			};

			vreg_l3p: ldo3 {
				regulator-name = "vreg_l3p";
				regulator-min-microvolt = <2700000>;
				regulator-max-microvolt = <3000000>;
			};

			vreg_l4p: ldo4 {
				regulator-name = "vreg_l4p";
				regulator-min-microvolt = <2700000>;
				regulator-max-microvolt = <2900000>;
			};

			vreg_l5p: ldo5 {
				regulator-name = "vreg_l5p";
				regulator-min-microvolt = <2704000>;
				regulator-max-microvolt = <2900000>;
			};

			vreg_l6p: ldo6 {
				regulator-name = "vreg_l6p";
				regulator-min-microvolt = <1700000>;
				regulator-max-microvolt = <1896000>;
			};

			vreg_l7p: ldo7 {
				regulator-name = "vreg_l7p";
				regulator-min-microvolt = <2700000>;
				regulator-max-microvolt = <3400000>;
			};
		};
	};

	/* VL53L3 ToF @ 0x29 */

	vibrator@5a {
		compatible = "awinic,aw86938", "awinic,aw86927";
		reg = <0x5a>;

		interrupts-extended = <&tlmm 80 IRQ_TYPE_EDGE_FALLING>;
		reset-gpios = <&tlmm 78 GPIO_ACTIVE_LOW>;

		pinctrl-0 = <&aw86938_int_default>, <&aw86938_reset_default>;
		pinctrl-names = "default";
	};
};

&ipa {
	firmware-name = "qcom/milos/fairphone/fp6/ipa_fws.mbn";
	memory-region = <&ipa_fw_mem>;

	qcom,gsi-loader = "self";

	status = "okay";
};

&pm8550vs_c {
	status = "okay";
};

&pmiv0104_eusb2_repeater {
	vdd18-supply = <&vreg_l7b>;
	vdd3-supply = <&vreg_l17b>;

	qcom,tune-res-fsdif = /bits/ 8 <0x5>;
	qcom,tune-usb2-amplitude = /bits/ 8 <0x8>;
	qcom,tune-usb2-disc-thres = /bits/ 8 <0x7>;
	qcom,tune-usb2-preem = /bits/ 8 <0x6>;
};

&pmr735b_gpios {
	s1j_enable_default: s1j-enable-default-state {
		pins = "gpio1";
		function = PMIC_GPIO_FUNC_NORMAL;
		power-source = <0>;
		bias-disable;
		output-low;
	};

	pm8008_reset_n_default: pm8008-reset-n-default-state {
		pins = "gpio3";
		function = PMIC_GPIO_FUNC_NORMAL;
		bias-pull-down;
	};
};

&pm7550_gpios {
	volume_up_default: volume-up-default-state {
		pins = "gpio6";
		function = PMIC_GPIO_FUNC_NORMAL;
		power-source = <1>;
		bias-pull-up;
	};
};

&pm7550_flash {
	status = "okay";

	led-0 {
		function = LED_FUNCTION_FLASH;
		color = <LED_COLOR_ID_WHITE>;
		led-sources = <1>, <4>;
		led-max-microamp = <350000>;
		flash-max-microamp = <1500000>;
		flash-max-timeout-us = <400000>;
	};
};

&pon_pwrkey {
	status = "okay";
};

&pon_resin {
	linux,code = <KEY_VOLUMEDOWN>;

	status = "okay";
};

&qupv3_id_0 {
	status = "okay";
};

&qupv3_id_1 {
	status = "okay";
};

&remoteproc_adsp {
	firmware-name = "qcom/milos/fairphone/fp6/adsp.mbn",
			"qcom/milos/fairphone/fp6/adsp_dtb.mbn";

	status = "okay";
};

&remoteproc_cdsp {
	firmware-name = "qcom/milos/fairphone/fp6/cdsp.mbn",
			"qcom/milos/fairphone/fp6/cdsp_dtb.mbn";

	status = "okay";
};

&remoteproc_mpss {
	firmware-name = "qcom/milos/fairphone/fp6/modem.mbn";

	status = "okay";
};

&remoteproc_wpss {
	firmware-name = "qcom/milos/fairphone/fp6/wpss.mbn";

	status = "okay";
};

&rmtfs_mem {
	/* Increase the size from 2.5 MiB to 6 MiB */
	reg = <0x0 0xe1f00000 0x0 0x600000>;
};

&sdhc_2 {
	cd-gpios = <&tlmm 65 GPIO_ACTIVE_HIGH>;

	vmmc-supply = <&vreg_l13b>;
	vqmmc-supply = <&vreg_l23b>;
	no-sdio;
	no-mmc;

	pinctrl-0 = <&sdc2_default>, <&sdc2_card_det_n>;
	pinctrl-1 = <&sdc2_sleep>, <&sdc2_card_det_n>;
	pinctrl-names = "default", "sleep";

	status = "okay";
};

&spi0 {
	/* Eswin EPH8621 touchscreen @ 0 */
};

&tlmm {
	gpio-reserved-ranges = <8 4>, /* Fingerprint SPI */
			       <13 1>, /* NC */
			       <63 2>; /* WLAN UART */

	sdc2_card_det_n: sdc2-card-det-state {
		pins = "gpio65";
		function = "gpio";
		drive-strength = <2>;
		bias-pull-up;
	};

	hall_sensor_default: hall-sensor-default-state {
		pins = "gpio70";
		function = "gpio";
		drive-strength = <2>;
		bias-disable;
	};

	aw86938_reset_default: aw86938-reset-default-state {
		pins = "gpio78";
		function = "gpio";
		drive-strength = <2>;
		bias-pull-down;
	};

	aw86938_int_default: aw86938-int-default-state {
		pins = "gpio80";
		function = "gpio";
		drive-strength = <2>;
		bias-pull-up;
	};

	pm8008_int_default: pm8008-int-default-state {
		pins = "gpio125";
		function = "gpio";
		drive-strength = <2>;
		bias-disable;
	};
};

&uart5 {
	status = "okay";
};

&ufs_mem_hc {
	reset-gpios = <&tlmm 167 GPIO_ACTIVE_LOW>;

	vcc-supply = <&vreg_l12b>;
	vcc-max-microamp = <800000>;
	vccq-supply = <&vreg_l5f>;
	vccq-max-microamp = <750000>;

	status = "okay";
};

&ufs_mem_phy {
	vdda-phy-supply = <&vreg_l2b>;
	vdda-pll-supply = <&vreg_l4b>;

	status = "okay";
};

&usb_1 {
	dr_mode = "otg";

	/* USB 2.0 only, HW does not support USB 3.x */
	qcom,select-utmi-as-pipe-clk;

	status = "okay";
};

&usb_1_dwc3_hs {
	remote-endpoint = <&pmic_glink_hs_in>;
};

&usb_1_hsphy {
	vdd-supply = <&vreg_l2b>;
	vdda12-supply = <&vreg_l4b>;

	phys = <&pmiv0104_eusb2_repeater>;

	status = "okay";
};