// SPDX-License-Identifier: BSD-3-Clause
/*
 * Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries.
 */

#include <dt-bindings/clock/qcom,dsi-phy-28nm.h>
#include <dt-bindings/clock/qcom,eliza-dispcc.h>
#include <dt-bindings/clock/qcom,eliza-gcc.h>
#include <dt-bindings/clock/qcom,eliza-tcsr.h>
#include <dt-bindings/clock/qcom,rpmh.h>
#include <dt-bindings/dma/qcom-gpi.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interconnect/qcom,eliza-rpmh.h>
#include <dt-bindings/interconnect/qcom,icc.h>
#include <dt-bindings/interconnect/qcom,osm-l3.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/mailbox/qcom-ipcc.h>
#include <dt-bindings/phy/phy-qcom-qmp.h>
#include <dt-bindings/power/qcom,rpmhpd.h>
#include <dt-bindings/soc/qcom,gpr.h>
#include <dt-bindings/soc/qcom,rpmh-rsc.h>
#include <dt-bindings/sound/qcom,q6dsp-lpass-ports.h>

/ {
	interrupt-parent = <&intc>;

	#address-cells = <2>;
	#size-cells = <2>;

	cpus {
		#address-cells = <2>;
		#size-cells = <0>;

		cpu0: cpu@0 {
			device_type = "cpu";
			compatible = "arm,cortex-a520";
			reg = <0x0 0x0>;

			clocks = <&cpufreq_hw 0>;

			power-domains = <&cpu_pd0>;
			power-domain-names = "psci";

			enable-method = "psci";
			next-level-cache = <&l2_0>;
			capacity-dmips-mhz = <1024>;
			dynamic-power-coefficient = <100>;

			qcom,freq-domain = <&cpufreq_hw 0>;
			#cooling-cells = <2>;

			l2_0: l2-cache {
				compatible = "cache";
				cache-level = <2>;
				cache-unified;
				next-level-cache = <&l3>;

				l3: l3-cache {
					compatible = "cache";
					cache-level = <3>;
					cache-unified;
				};
			};
		};

		cpu1: cpu@100 {
			device_type = "cpu";
			compatible = "arm,cortex-a520";
			reg = <0x0 0x100>;

			clocks = <&cpufreq_hw 0>;

			power-domains = <&cpu_pd1>;
			power-domain-names = "psci";

			enable-method = "psci";
			next-level-cache = <&l2_0>;
			capacity-dmips-mhz = <1024>;
			dynamic-power-coefficient = <100>;

			qcom,freq-domain = <&cpufreq_hw 0>;
			#cooling-cells = <2>;
		};

		cpu2: cpu@200 {
			device_type = "cpu";
			compatible = "arm,cortex-a520";
			reg = <0x0 0x200>;

			clocks = <&cpufreq_hw 0>;

			power-domains = <&cpu_pd2>;
			power-domain-names = "psci";

			enable-method = "psci";
			next-level-cache = <&l2_2>;
			capacity-dmips-mhz = <1024>;
			dynamic-power-coefficient = <100>;

			qcom,freq-domain = <&cpufreq_hw 0>;
			#cooling-cells = <2>;

			l2_2: l2-cache {
				compatible = "cache";
				cache-level = <2>;
				cache-unified;
				next-level-cache = <&l3>;
			};
		};

		cpu3: cpu@300 {
			device_type = "cpu";
			compatible = "arm,cortex-a720";
			reg = <0x0 0x300>;

			clocks = <&cpufreq_hw 1>;

			power-domains = <&cpu_pd3>;
			power-domain-names = "psci";

			enable-method = "psci";
			next-level-cache = <&l2_3>;
			capacity-dmips-mhz = <1792>;
			dynamic-power-coefficient = <238>;

			qcom,freq-domain = <&cpufreq_hw 1>;
			#cooling-cells = <2>;

			l2_3: l2-cache {
				compatible = "cache";
				cache-level = <2>;
				cache-unified;
				next-level-cache = <&l3>;
			};
		};

		cpu4: cpu@400 {
			device_type = "cpu";
			compatible = "arm,cortex-a720";
			reg = <0x0 0x400>;

			clocks = <&cpufreq_hw 1>;

			power-domains = <&cpu_pd4>;
			power-domain-names = "psci";

			enable-method = "psci";
			next-level-cache = <&l2_4>;
			capacity-dmips-mhz = <1792>;
			dynamic-power-coefficient = <238>;

			qcom,freq-domain = <&cpufreq_hw 1>;
			#cooling-cells = <2>;

			l2_4: l2-cache {
				compatible = "cache";
				cache-level = <2>;
				cache-unified;
				next-level-cache = <&l3>;
			};
		};

		cpu5: cpu@500 {
			device_type = "cpu";
			compatible = "arm,cortex-a720";
			reg = <0x0 0x500>;

			clocks = <&cpufreq_hw 1>;

			power-domains = <&cpu_pd5>;
			power-domain-names = "psci";

			enable-method = "psci";
			next-level-cache = <&l2_5>;
			capacity-dmips-mhz = <1792>;
			dynamic-power-coefficient = <238>;

			qcom,freq-domain = <&cpufreq_hw 1>;
			#cooling-cells = <2>;

			l2_5: l2-cache {
				compatible = "cache";
				cache-level = <2>;
				cache-unified;
				next-level-cache = <&l3>;
			};
		};

		cpu6: cpu@600 {
			device_type = "cpu";
			compatible = "arm,cortex-a720";
			reg = <0x0 0x600>;

			clocks = <&cpufreq_hw 1>;

			power-domains = <&cpu_pd6>;
			power-domain-names = "psci";

			enable-method = "psci";
			next-level-cache = <&l2_6>;
			capacity-dmips-mhz = <1792>;
			dynamic-power-coefficient = <238>;

			qcom,freq-domain = <&cpufreq_hw 1>;
			#cooling-cells = <2>;

			l2_6: l2-cache {
				compatible = "cache";
				cache-level = <2>;
				cache-unified;
				next-level-cache = <&l3>;
			};
		};

		cpu7: cpu@700 {
			device_type = "cpu";
			compatible = "arm,cortex-x3";
			reg = <0x0 0x700>;

			clocks = <&cpufreq_hw 2>;

			power-domains = <&cpu_pd7>;
			power-domain-names = "psci";

			enable-method = "psci";
			next-level-cache = <&l2_7>;
			capacity-dmips-mhz = <1894>;
			dynamic-power-coefficient = <588>;

			qcom,freq-domain = <&cpufreq_hw 2>;
			#cooling-cells = <2>;

			l2_7: l2-cache {
				compatible = "cache";
				cache-level = <2>;
				cache-unified;
				next-level-cache = <&l3>;
			};
		};

		cpu-map {
			cluster0 {
				core0 {
					cpu = <&cpu0>;
				};

				core1 {
					cpu = <&cpu1>;
				};

				core2 {
					cpu = <&cpu2>;
				};

				core3 {
					cpu = <&cpu3>;
				};

				core4 {
					cpu = <&cpu4>;
				};

				core5 {
					cpu = <&cpu5>;
				};

				core6 {
					cpu = <&cpu6>;
				};

				core7 {
					cpu = <&cpu7>;
				};
			};
		};

		idle-states {
			entry-method = "psci";

			cluster0_c4: cpu-sleep-0 {
				compatible = "arm,idle-state";
				idle-state-name = "silver-rail-power-collapse";
				arm,psci-suspend-param = <0x40000004>;
				entry-latency-us = <550>;
				exit-latency-us = <750>;
				min-residency-us = <6700>;
			};

			cluster1_c4: cpu-sleep-1 {
				compatible = "arm,idle-state";
				idle-state-name = "gold-rail-power-collapse";
				arm,psci-suspend-param = <0x40000004>;
				entry-latency-us = <550>;
				exit-latency-us = <1050>;
				min-residency-us = <7951>;
			};

			cluster2_c4: cpu-sleep-2 {
				compatible = "arm,idle-state";
				idle-state-name = "gold-plus-rail-power-collapse";
				arm,psci-suspend-param = <0x40000004>;
				entry-latency-us = <500>;
				exit-latency-us = <1350>;
				min-residency-us = <7480>;
			};
		};

		domain-idle-states {
			cluster_sleep_0: cluster-sleep-0 {
				compatible = "domain-idle-state";
				arm,psci-suspend-param = <0x41000044>;
				entry-latency-us = <750>;
				exit-latency-us = <2350>;
				min-residency-us = <9144>;
			};

			cluster_sleep_1: cluster-sleep-1 {
				compatible = "domain-idle-state";
				arm,psci-suspend-param = <0x4100b344>;
				entry-latency-us = <2800>;
				exit-latency-us = <4400>;
				min-residency-us = <10150>;
			};
		};
	};

	firmware {
		scm: scm {
			compatible = "qcom,scm-eliza", "qcom,scm";
			interconnects = <&aggre2_noc MASTER_CRYPTO QCOM_ICC_TAG_ALWAYS
					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
			qcom,dload-mode = <&tcsr 0x1a000>;
		};
	};

	clk_virt: interconnect-0 {
		compatible = "qcom,eliza-clk-virt";
		#interconnect-cells = <2>;
		qcom,bcm-voters = <&apps_bcm_voter>;
	};

	mc_virt: interconnect-1 {
		compatible = "qcom,eliza-mc-virt";
		#interconnect-cells = <2>;
		qcom,bcm-voters = <&apps_bcm_voter>;
	};

	memory@a0000000 {
		device_type = "memory";
		/* We expect the bootloader to fill in the size */
		reg = <0x0 0xa0000000 0x0 0x0>;
	};

	psci {
		compatible = "arm,psci-1.0";
		method = "smc";

		cpu_pd0: power-domain-cpu0 {
			#power-domain-cells = <0>;
			power-domains = <&cluster_pd>;
			domain-idle-states = <&cluster0_c4>;
		};

		cpu_pd1: power-domain-cpu1 {
			#power-domain-cells = <0>;
			power-domains = <&cluster_pd>;
			domain-idle-states = <&cluster0_c4>;
		};

		cpu_pd2: power-domain-cpu2 {
			#power-domain-cells = <0>;
			power-domains = <&cluster_pd>;
			domain-idle-states = <&cluster0_c4>;
		};

		cpu_pd3: power-domain-cpu3 {
			#power-domain-cells = <0>;
			power-domains = <&cluster_pd>;
			domain-idle-states = <&cluster1_c4>;
		};

		cpu_pd4: power-domain-cpu4 {
			#power-domain-cells = <0>;
			power-domains = <&cluster_pd>;
			domain-idle-states = <&cluster1_c4>;
		};

		cpu_pd5: power-domain-cpu5 {
			#power-domain-cells = <0>;
			power-domains = <&cluster_pd>;
			domain-idle-states = <&cluster1_c4>;
		};

		cpu_pd6: power-domain-cpu6 {
			#power-domain-cells = <0>;
			power-domains = <&cluster_pd>;
			domain-idle-states = <&cluster1_c4>;
		};

		cpu_pd7: power-domain-cpu7 {
			#power-domain-cells = <0>;
			power-domains = <&cluster_pd>;
			domain-idle-states = <&cluster2_c4>;
		};

		cluster_pd: power-domain-cluster {
			#power-domain-cells = <0>;
			domain-idle-states = <&cluster_sleep_0>,
					     <&cluster_sleep_1>;
		};
	};

	reserved-memory {
		#address-cells = <2>;
		#size-cells = <2>;
		ranges;

		gunyah_hyp_mem: gunyah-hyp@80000000 {
			reg = <0x0 0x80000000 0x0 0xe00000>;
			no-map;
		};

		cpusys_vm_mem: cpusys-vm-mem@80e00000 {
			reg = <0x0 0x80e00000 0x0 0x400000>;
			no-map;
		};

		cpucp_mem: cpucp@81200000 {
			reg = <0x0 0x81200000 0x0 0x100000>;
			no-map;
		};

		xbl_dtlog_mem: xbl-dtlog@81a00000 {
			reg = <0x0 0x81a00000 0x0 0x40000>;
			no-map;
		};

		aop_image_mem: aop-image@81c00000 {
			reg = <0x0 0x81c00000 0x0 0x60000>;
			no-map;
		};

		aop_cmd_db_mem: aop-cmd-db@81c60000 {
			compatible = "qcom,cmd-db";
			reg = <0x0 0x81c60000 0x0 0x20000>;
			no-map;
		};

		/* Merged aop_config, tme_crash_dump, tme_log and uefi_log regions */
		aop_tme_uefi_merged_mem: aop-tme-uefi-merged@81c80000 {
			reg = <0x0 0x81c80000 0x0 0x74000>;
			no-map;
		};

		/* Secdata region can be reused by apps */
		smem_mem: smem@81d00000 {
			compatible = "qcom,smem";
			reg = <0x0 0x81d00000 0x0 0x200000>;
			hwlocks = <&tcsr_mutex 3>;
			no-map;
		};

		cpucp_scandump_mem: cpucp-scandump@82200000 {
			reg = <0x0 0x82200000 0x0 0x180000>;
			no-map;
		};

		adsp_mhi_mem: adsp-mhi@82380000 {
			reg = <0x0 0x82380000 0x0 0x20000>;
			no-map;
		};

		soccp_sdi_mem: soccp-sdi@823a0000 {
			reg = <0x0 0x823a0000 0x0 0x40000>;
			no-map;
		};

		pmic_minii_dump_mem: pmic-minii-dump@823e0000 {
			reg = <0x0 0x823e0000 0x0 0x80000>;
			no-map;
		};

		pvmfw_mem: pvmfw@824a0000 {
			reg = <0x0 0x824a0000 0x0 0x100000>;
			no-map;
		};

		hyp_db_mem: hyp-db@825a0000 {
			reg = <0x0 0x825a0000 0x0 0x60000>;
			no-map;
		};

		global_sync_mem: global-sync@82600000 {
			reg = <0x0 0x82600000 0x0 0x100000>;
			no-map;
		};

		tz_stat_mem: tz-stat@82700000 {
			reg = <0x0 0x82700000 0x0 0x100000>;
			no-map;
		};

		qdss_mem: qdss@82800000 {
			reg = <0x0 0x82800000 0x0 0x2000000>;
			no-map;
		};

		dsm_partition_1_mem: dsm-partition-1@84a00000 {
			reg = <0x0 0x84a00000 0x0 0x3700000>;
			no-map;
		};

		mpss_mem: mpss@88100000 {
			reg = <0x0 0x88100000 0x0 0xcd00000>;
			no-map;
		};

		q6_mpss_dtb_mem: q6-mpss-dtb@94e00000 {
			reg = <0x0 0x94e00000 0x0 0x80000>;
			no-map;
		};

		ipa_fw_mem: ipa-fw@94e80000 {
			reg = <0x0 0x94e80000 0x0 0x10000>;
			no-map;
		};

		ipa_gsi_mem: ipa-gsi@94e90000 {
			reg = <0x0 0x94e90000 0x0 0xa000>;
			no-map;
		};

		gpu_micro_code_mem: gpu-micro-code@94e9a000 {
			reg = <0x0 0x94e9a000 0x0 0x2000>;
			no-map;
		};

		camera_mem: camera@94f00000 {
			reg = <0x0 0x94f00000 0x0 0x800000>;
			no-map;
		};

		camera_2_mem: camera-2@95700000 {
			reg = <0x0 0x95700000 0x0 0x800000>;
			no-map;
		};

		video_mem: video@95f00000 {
			reg = <0x0 0x95f00000 0x0 0x800000>;
			no-map;
		};

		soccp_mem: soccp@96700000 {
			reg = <0x0 0x96700000 0x0 0x180000>;
			no-map;
		};

		wpss_mem: wpss@97000000 {
			reg = <0x0 0x97000000 0x0 0x1900000>;
			no-map;
		};

		cdsp_mem: cdsp@98900000 {
			reg = <0x0 0x98900000 0x0 0x1400000>;
			no-map;
		};

		q6_cdsp_dtb_mem: q6-cdsp-dtb@99d00000 {
			reg = <0x0 0x99d00000 0x0 0x80000>;
			no-map;
		};

		q6_adsp_dtb_mem: q6-adsp-dtb@99d80000 {
			reg = <0x0 0x99d80000 0x0 0x80000>;
			no-map;
		};

		adspslpi_mem: adspslpi@99e00000 {
			reg = <0x0 0x99e00000 0x0 0x2a00000>;
			no-map;
		};

		wlan_msa_mem: wlan-msa@a6400000 {
			reg = <0x0 0xa6400000 0x0 0xc00000>;
			no-map;
		};

		xbl_ramdump_mem: xbl-ramdump@b8000000 {
			reg = <0x0 0xb8000000 0x0 0x1c0000>;
			no-map;
		};

		/* Merged tz_reserved, xbl_sc, and qtee regions */
		tz_merged_mem: tz-merged@d8000000 {
			reg = <0x0 0xd8000000 0x0 0x600000>;
			no-map;
		};

		trust_ui_vm_mem: trust-ui-vm@f3800000 {
			reg = <0x0 0xf3800000 0x0 0x4400000>;
			no-map;
		};

		oem_vm_mem: oem-vm@f7c00000 {
			reg = <0x0 0xf7c00000 0x0 0x4c00000>;
			no-map;
		};

		llcc_lpi_mem: llcc-lpi@ff800000 {
			reg = <0x0 0xff800000 0x0 0x180000>;
			no-map;
		};
	};

	smp2p-adsp {
		compatible = "qcom,smp2p";
		qcom,smem = <443>, <429>;
		interrupts-extended = <&ipcc IPCC_CLIENT_LPASS
					     IPCC_MPROC_SIGNAL_SMP2P
					     IRQ_TYPE_EDGE_RISING>;
		mboxes = <&ipcc IPCC_CLIENT_LPASS
				IPCC_MPROC_SIGNAL_SMP2P>;

		qcom,local-pid = <0>;
		qcom,remote-pid = <2>;

		smp2p_adsp_out: master-kernel {
			qcom,entry-name = "master-kernel";
			#qcom,smem-state-cells = <1>;
		};

		smp2p_adsp_in: slave-kernel {
			qcom,entry-name = "slave-kernel";
			interrupt-controller;
			#interrupt-cells = <2>;
		};
	};

	soc: soc@0 {
		compatible = "simple-bus";

		#address-cells = <2>;
		#size-cells = <2>;
		dma-ranges = <0x0 0x0 0x0 0x0 0x10 0x0>;
		ranges = <0x0 0x0 0x0 0x0 0x10 0x0>;

		gcc: clock-controller@100000 {
			compatible = "qcom,eliza-gcc";
			reg = <0x0 0x00100000 0x0 0x1f4200>;

			clocks = <&bi_tcxo_div2>,
				 <&sleep_clk>,
				 <0>,
				 <0>,
				 <&ufs_mem_phy 0>,
				 <&ufs_mem_phy 1>,
				 <&ufs_mem_phy 2>,
				 <0>;

			power-domains = <&rpmhpd RPMHPD_CX>;

			#clock-cells = <1>;
			#reset-cells = <1>;
			#power-domain-cells = <1>;
		};

		ipcc: mailbox@406000 {
			compatible = "qcom,eliza-ipcc", "qcom,ipcc";
			reg = <0x0 0x00406000 0x0 0x1000>;

			interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>;
			interrupt-controller;
			#interrupt-cells = <3>;

			#mbox-cells = <2>;
		};

		gpi_dma2: dma-controller@800000 {
			compatible = "qcom,eliza-gpi-dma", "qcom,sm6350-gpi-dma";
			reg = <0x0 0x00800000 0x0 0x60000>;

			interrupts = <GIC_SPI 588 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 589 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 590 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 591 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 592 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 593 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 594 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 595 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 596 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 597 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 598 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 599 IRQ_TYPE_LEVEL_HIGH>;

			dma-channels = <12>;
			dma-channel-mask = <0x3f>;
			#dma-cells = <3>;

			iommus = <&apps_smmu 0x436 0>;

			dma-coherent;
		};

		qupv3_2: geniqup@8c0000 {
			compatible = "qcom,geni-se-qup";
			reg = <0x0 0x008c0000 0x0 0x2000>;

			clocks = <&gcc GCC_QUPV3_WRAP_2_M_AHB_CLK>,
				 <&gcc GCC_QUPV3_WRAP_2_S_AHB_CLK>;
			clock-names = "m-ahb",
				      "s-ahb";

			iommus = <&apps_smmu 0x423 0x0>;

			#address-cells = <2>;
			#size-cells = <2>;
			ranges;

			i2c8: i2c@880000 {
				compatible = "qcom,geni-i2c";
				reg = <0x0 0x00880000 0x0 0x4000>;

				interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;

				clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>;
				clock-names = "se";

				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ACTIVE_ONLY>,
						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
						 &mc_virt  SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
				interconnect-names = "qup-core",
						     "qup-config",
						     "qup-memory";

				dmas = <&gpi_dma2 0 0 QCOM_GPI_I2C>,
				       <&gpi_dma2 1 0 QCOM_GPI_I2C>;
				dma-names = "tx",
					    "rx";

				pinctrl-0 = <&qup_i2c8_data_clk>;
				pinctrl-names = "default";

				#address-cells = <1>;
				#size-cells = <0>;

				status = "disabled";
			};

			spi8: spi@880000 {
				compatible = "qcom,geni-spi";
				reg = <0x0 0x00880000 0x0 0x4000>;

				interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;

				clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>;
				clock-names = "se";

				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ACTIVE_ONLY>,
						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
						 &mc_virt  SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
				interconnect-names = "qup-core",
						     "qup-config",
						     "qup-memory";

				dmas = <&gpi_dma2 0 0 QCOM_GPI_SPI>,
				       <&gpi_dma2 1 0 QCOM_GPI_SPI>;
				dma-names = "tx",
					    "rx";

				pinctrl-0 = <&qup_spi8_data_clk>, <&qup_spi8_cs>;
				pinctrl-names = "default";

				#address-cells = <1>;
				#size-cells = <0>;

				status = "disabled";
			};

			i2c9: i2c@884000 {
				compatible = "qcom,geni-i2c";
				reg = <0x0 0x00884000 0x0 0x4000>;

				interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>;

				clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>;
				clock-names = "se";

				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ACTIVE_ONLY>,
						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
						 &mc_virt  SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
				interconnect-names = "qup-core",
						     "qup-config",
						     "qup-memory";

				dmas = <&gpi_dma2 0 1 QCOM_GPI_I2C>,
				       <&gpi_dma2 1 1 QCOM_GPI_I2C>;
				dma-names = "tx",
					    "rx";

				pinctrl-0 = <&qup_i2c9_data_clk>;
				pinctrl-names = "default";

				#address-cells = <1>;
				#size-cells = <0>;

				status = "disabled";
			};

			spi9: spi@884000 {
				compatible = "qcom,geni-spi";
				reg = <0x0 0x00884000 0x0 0x4000>;

				interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>;

				clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>;
				clock-names = "se";

				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ACTIVE_ONLY>,
						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
						 &mc_virt  SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
				interconnect-names = "qup-core",
						     "qup-config",
						     "qup-memory";

				dmas = <&gpi_dma2 0 1 QCOM_GPI_SPI>,
				       <&gpi_dma2 1 1 QCOM_GPI_SPI>;
				dma-names = "tx",
					    "rx";

				pinctrl-0 = <&qup_spi9_data_clk>, <&qup_spi9_cs>;
				pinctrl-names = "default";

				#address-cells = <1>;
				#size-cells = <0>;

				status = "disabled";
			};

			i2c10: i2c@888000 {
				compatible = "qcom,geni-i2c";
				reg = <0x0 0x00888000 0x0 0x4000>;

				interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>;

				clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>;
				clock-names = "se";

				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ACTIVE_ONLY>,
						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
						 &mc_virt  SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
				interconnect-names = "qup-core",
						     "qup-config",
						     "qup-memory";

				dmas = <&gpi_dma2 0 2 QCOM_GPI_I2C>,
				       <&gpi_dma2 1 2 QCOM_GPI_I2C>;
				dma-names = "tx",
					    "rx";

				pinctrl-0 = <&qup_i2c10_data_clk>;
				pinctrl-names = "default";

				#address-cells = <1>;
				#size-cells = <0>;

				status = "disabled";
			};

			spi10: spi@888000 {
				compatible = "qcom,geni-spi";
				reg = <0x0 0x00888000 0x0 0x4000>;

				interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>;

				clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>;
				clock-names = "se";

				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ACTIVE_ONLY>,
						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
						 &mc_virt  SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
				interconnect-names = "qup-core",
						     "qup-config",
						     "qup-memory";

				dmas = <&gpi_dma2 0 2 QCOM_GPI_SPI>,
				       <&gpi_dma2 1 2 QCOM_GPI_SPI>;
				dma-names = "tx",
					    "rx";

				pinctrl-0 = <&qup_spi10_data_clk>, <&qup_spi10_cs>;
				pinctrl-names = "default";

				#address-cells = <1>;
				#size-cells = <0>;

				status = "disabled";
			};

			i2c11: i2c@88c000 {
				compatible = "qcom,geni-i2c";
				reg = <0x0 0x0088c000 0x0 0x4000>;

				interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>;

				clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>;
				clock-names = "se";

				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ACTIVE_ONLY>,
						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
						 &mc_virt  SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
				interconnect-names = "qup-core",
						     "qup-config",
						     "qup-memory";

				dmas = <&gpi_dma2 0 3 QCOM_GPI_I2C>,
				       <&gpi_dma2 1 3 QCOM_GPI_I2C>;
				dma-names = "tx",
					    "rx";

				pinctrl-0 = <&qup_i2c11_data_clk>;
				pinctrl-names = "default";

				#address-cells = <1>;
				#size-cells = <0>;

				status = "disabled";
			};

			spi11: spi@88c000 {
				compatible = "qcom,geni-spi";
				reg = <0x0 0x0088c000 0x0 0x4000>;

				interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>;

				clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>;
				clock-names = "se";

				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ACTIVE_ONLY>,
						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
						 &mc_virt  SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
				interconnect-names = "qup-core",
						     "qup-config",
						     "qup-memory";

				dmas = <&gpi_dma2 0 3 QCOM_GPI_SPI>,
				       <&gpi_dma2 1 3 QCOM_GPI_SPI>;
				dma-names = "tx",
					    "rx";

				pinctrl-0 = <&qup_spi11_data_clk>, <&qup_spi11_cs>;
				pinctrl-names = "default";

				#address-cells = <1>;
				#size-cells = <0>;

				status = "disabled";
			};

			i2c12: i2c@890000 {
				compatible = "qcom,geni-i2c";
				reg = <0x0 0x00890000 0x0 0x4000>;

				interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>;

				clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>;
				clock-names = "se";

				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ACTIVE_ONLY>,
						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
						 &mc_virt  SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
				interconnect-names = "qup-core",
						     "qup-config",
						     "qup-memory";

				dmas = <&gpi_dma2 0 4 QCOM_GPI_I2C>,
				       <&gpi_dma2 1 4 QCOM_GPI_I2C>;
				dma-names = "tx",
					    "rx";

				pinctrl-0 = <&qup_i2c12_data_clk>;
				pinctrl-names = "default";

				#address-cells = <1>;
				#size-cells = <0>;

				status = "disabled";
			};

			spi12: spi@890000 {
				compatible = "qcom,geni-spi";
				reg = <0x0 0x00890000 0x0 0x4000>;

				interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>;

				clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>;
				clock-names = "se";

				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ACTIVE_ONLY>,
						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
						 &mc_virt  SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
				interconnect-names = "qup-core",
						     "qup-config",
						     "qup-memory";

				dmas = <&gpi_dma2 0 4 QCOM_GPI_SPI>,
				       <&gpi_dma2 1 4 QCOM_GPI_SPI>;
				dma-names = "tx",
					    "rx";

				pinctrl-0 = <&qup_spi12_data_clk>, <&qup_spi12_cs>;
				pinctrl-names = "default";

				#address-cells = <1>;
				#size-cells = <0>;

				status = "disabled";
			};

			uart13: serial@894000 {
				compatible = "qcom,geni-uart";
				reg = <0x0 0x00894000 0x0 0x4000>;

				interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>;

				clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>;
				clock-names = "se";

				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>;
				interconnect-names = "qup-core",
						     "qup-config";

				pinctrl-0 = <&qup_uart13_default>;
				pinctrl-names = "default";

				status = "disabled";
			};

			i2c14: i2c@898000 {
				compatible = "qcom,geni-i2c";
				reg = <0x0 0x00898000 0x0 0x4000>;

				interrupts = <GIC_SPI 461 IRQ_TYPE_LEVEL_HIGH>;

				clocks = <&gcc GCC_QUPV3_WRAP2_S6_CLK>;
				clock-names = "se";

				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ACTIVE_ONLY>,
						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
						 &mc_virt  SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
				interconnect-names = "qup-core",
						     "qup-config",
						     "qup-memory";

				dmas = <&gpi_dma2 0 6 QCOM_GPI_I2C>,
				       <&gpi_dma2 1 6 QCOM_GPI_I2C>;
				dma-names = "tx",
					    "rx";

				pinctrl-0 = <&qup_i2c14_data_clk>;
				pinctrl-names = "default";

				#address-cells = <1>;
				#size-cells = <0>;

				status = "disabled";
			};

			spi14: spi@898000 {
				compatible = "qcom,geni-spi";
				reg = <0x0 0x00898000 0x0 0x4000>;

				interrupts = <GIC_SPI 461 IRQ_TYPE_LEVEL_HIGH>;

				clocks = <&gcc GCC_QUPV3_WRAP2_S6_CLK>;
				clock-names = "se";

				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ACTIVE_ONLY>,
						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
						 &mc_virt  SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
				interconnect-names = "qup-core",
						     "qup-config",
						     "qup-memory";

				dmas = <&gpi_dma2 0 6 QCOM_GPI_SPI>,
				       <&gpi_dma2 1 6 QCOM_GPI_SPI>;
				dma-names = "tx",
					    "rx";

				pinctrl-0 = <&qup_spi14_data_clk>, <&qup_spi14_cs>;
				pinctrl-names = "default";

				#address-cells = <1>;
				#size-cells = <0>;

				status = "disabled";
			};

			i2c15: i2c@89c000 {
				compatible = "qcom,geni-i2c";
				reg = <0x0 0x0089c000 0x0 0x4000>;

				interrupts = <GIC_SPI 462 IRQ_TYPE_LEVEL_HIGH>;

				clocks = <&gcc GCC_QUPV3_WRAP2_S7_CLK>;
				clock-names = "se";

				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ACTIVE_ONLY>,
						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
						 &mc_virt  SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
				interconnect-names = "qup-core",
						     "qup-config",
						     "qup-memory";

				dmas = <&gpi_dma2 0 7 QCOM_GPI_I2C>,
				       <&gpi_dma2 1 7 QCOM_GPI_I2C>;
				dma-names = "tx",
					    "rx";

				pinctrl-0 = <&qup_i2c15_data_clk>;
				pinctrl-names = "default";

				#address-cells = <1>;
				#size-cells = <0>;

				status = "disabled";
			};

			spi15: spi@89c000 {
				compatible = "qcom,geni-spi";
				reg = <0x0 0x0089c000 0x0 0x4000>;

				interrupts = <GIC_SPI 462 IRQ_TYPE_LEVEL_HIGH>;

				clocks = <&gcc GCC_QUPV3_WRAP2_S7_CLK>;
				clock-names = "se";

				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ACTIVE_ONLY>,
						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
						 &mc_virt  SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
				interconnect-names = "qup-core",
						     "qup-config",
						     "qup-memory";

				dmas = <&gpi_dma2 0 7 QCOM_GPI_SPI>,
				       <&gpi_dma2 1 7 QCOM_GPI_SPI>;
				dma-names = "tx",
					    "rx";

				pinctrl-0 = <&qup_spi15_data_clk>, <&qup_spi15_cs>;
				pinctrl-names = "default";

				#address-cells = <1>;
				#size-cells = <0>;

				status = "disabled";
			};
		};

		gpi_dma1: dma-controller@a00000 {
			compatible = "qcom,eliza-gpi-dma", "qcom,sm6350-gpi-dma";
			reg = <0x0 0x00a00000 0x0 0x60000>;

			interrupts = <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 284 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 294 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 295 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 296 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>;

			dma-channels = <12>;
			dma-channel-mask = <0x3f>;
			#dma-cells = <3>;

			iommus = <&apps_smmu 0xb6 0x0>;

			dma-coherent;
		};

		qupv3_1: geniqup@ac0000 {
			compatible = "qcom,geni-se-qup";
			reg = <0x0 0x00ac0000 0x0 0x2000>;

			clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>,
				 <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>;
			clock-names = "m-ahb",
				      "s-ahb";

			iommus = <&apps_smmu 0xa3 0x0>;

			#address-cells = <2>;
			#size-cells = <2>;
			ranges;

			i2c0: i2c@a80000 {
				compatible = "qcom,geni-i2c";
				reg = <0x0 0x00a80000 0x0 0x4000>;

				interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;

				clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
				clock-names = "se";

				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>,
						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
				interconnect-names = "qup-core",
						     "qup-config",
						     "qup-memory";

				dmas = <&gpi_dma1 0 0 QCOM_GPI_I2C>,
				       <&gpi_dma1 1 0 QCOM_GPI_I2C>;
				dma-names = "tx",
					    "rx";

				pinctrl-0 = <&qup_i2c0_data_clk>;
				pinctrl-names = "default";

				#address-cells = <1>;
				#size-cells = <0>;

				status = "disabled";
			};

			spi0: spi@a80000 {
				compatible = "qcom,geni-spi";
				reg = <0x0 0x00a80000 0x0 0x4000>;

				interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;

				clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
				clock-names = "se";

				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>,
						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
				interconnect-names = "qup-core",
						     "qup-config",
						     "qup-memory";

				dmas = <&gpi_dma1 0 0 QCOM_GPI_SPI>,
				       <&gpi_dma1 1 0 QCOM_GPI_SPI>;
				dma-names = "tx",
					    "rx";

				pinctrl-0 = <&qup_spi0_data_clk>, <&qup_spi0_cs>;
				pinctrl-names = "default";

				#address-cells = <1>;
				#size-cells = <0>;

				status = "disabled";
			};

			i2c1: i2c@a84000 {
				compatible = "qcom,geni-i2c";
				reg = <0x0 0x00a84000 0x0 0x4000>;

				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;

				clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
				clock-names = "se";

				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>,
						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
				interconnect-names = "qup-core",
						     "qup-config",
						     "qup-memory";

				dmas = <&gpi_dma1 0 1 QCOM_GPI_I2C>,
				       <&gpi_dma1 1 1 QCOM_GPI_I2C>;
				dma-names = "tx",
					    "rx";

				pinctrl-0 = <&qup_i2c1_data_clk>;
				pinctrl-names = "default";

				#address-cells = <1>;
				#size-cells = <0>;

				status = "disabled";
			};

			spi1: spi@a84000 {
				compatible = "qcom,geni-spi";
				reg = <0x0 0x00a84000 0x0 0x4000>;

				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;

				clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
				clock-names = "se";

				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>,
						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
				interconnect-names = "qup-core",
						     "qup-config",
						     "qup-memory";

				dmas = <&gpi_dma1 0 1 QCOM_GPI_SPI>,
				       <&gpi_dma1 1 1 QCOM_GPI_SPI>;
				dma-names = "tx",
					    "rx";

				pinctrl-0 = <&qup_spi1_data_clk>, <&qup_spi1_cs>;
				pinctrl-names = "default";

				#address-cells = <1>;
				#size-cells = <0>;

				status = "disabled";
			};

			i2c2: i2c@a88000 {
				compatible = "qcom,geni-i2c";
				reg = <0x0 0x00a88000 0x0 0x4000>;

				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;

				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
				clock-names = "se";

				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>,
						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
				interconnect-names = "qup-core",
						     "qup-config",
						     "qup-memory";

				dmas = <&gpi_dma1 0 2 QCOM_GPI_I2C>,
				       <&gpi_dma1 1 2 QCOM_GPI_I2C>;
				dma-names = "tx",
					    "rx";

				pinctrl-0 = <&qup_i2c2_data_clk>;
				pinctrl-names = "default";

				#address-cells = <1>;
				#size-cells = <0>;

				status = "disabled";
			};

			spi2: spi@a88000 {
				compatible = "qcom,geni-spi";
				reg = <0x0 0x00a88000 0x0 0x4000>;

				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;

				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
				clock-names = "se";

				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>,
						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
				interconnect-names = "qup-core",
						     "qup-config",
						     "qup-memory";

				dmas = <&gpi_dma1 0 2 QCOM_GPI_SPI>,
				       <&gpi_dma1 1 2 QCOM_GPI_SPI>;
				dma-names = "tx",
					    "rx";

				pinctrl-0 = <&qup_spi2_data_clk>, <&qup_spi2_cs>;
				pinctrl-names = "default";

				#address-cells = <1>;
				#size-cells = <0>;

				status = "disabled";
			};

			i2c3: i2c@a8c000 {
				compatible = "qcom,geni-i2c";
				reg = <0x0 0x00a8c000 0x0 0x4000>;

				interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;

				clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
				clock-names = "se";

				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>,
						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
				interconnect-names = "qup-core",
						     "qup-config",
						     "qup-memory";

				dmas = <&gpi_dma1 0 3 QCOM_GPI_I2C>,
				       <&gpi_dma1 1 3 QCOM_GPI_I2C>;
				dma-names = "tx",
					    "rx";

				pinctrl-0 = <&qup_i2c3_data_clk>;
				pinctrl-names = "default";

				#address-cells = <1>;
				#size-cells = <0>;

				status = "disabled";
			};

			spi3: spi@a8c000 {
				compatible = "qcom,geni-spi";
				reg = <0x0 0x00a8c000 0x0 0x4000>;

				interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;

				clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
				clock-names = "se";

				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>,
						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
				interconnect-names = "qup-core",
						     "qup-config",
						     "qup-memory";

				dmas = <&gpi_dma1 0 3 QCOM_GPI_SPI>,
				       <&gpi_dma1 1 3 QCOM_GPI_SPI>;
				dma-names = "tx",
					    "rx";

				pinctrl-0 = <&qup_spi3_data_clk>, <&qup_spi3_cs>;
				pinctrl-names = "default";

				#address-cells = <1>;
				#size-cells = <0>;

				status = "disabled";
			};

			i2c4: i2c@a90000 {
				compatible = "qcom,geni-i2c";
				reg = <0x0 0x00a90000 0x0 0x4000>;

				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;

				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
				clock-names = "se";

				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>,
						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
				interconnect-names = "qup-core",
						     "qup-config",
						     "qup-memory";

				dmas = <&gpi_dma1 0 4 QCOM_GPI_I2C>,
				       <&gpi_dma1 1 4 QCOM_GPI_I2C>;
				dma-names = "tx",
					    "rx";

				pinctrl-0 = <&qup_i2c4_data_clk>;
				pinctrl-names = "default";

				#address-cells = <1>;
				#size-cells = <0>;

				status = "disabled";
			};

			spi4: spi@a90000 {
				compatible = "qcom,geni-spi";
				reg = <0x0 0x00a90000 0x0 0x4000>;

				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;

				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
				clock-names = "se";

				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>,
						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
				interconnect-names = "qup-core",
						     "qup-config",
						     "qup-memory";

				dmas = <&gpi_dma1 0 4 QCOM_GPI_SPI>,
				       <&gpi_dma1 1 4 QCOM_GPI_SPI>;
				dma-names = "tx",
					    "rx";

				pinctrl-0 = <&qup_spi4_clk>, <&qup_spi4_cs>,
					    <&qup_spi4_data>;
				pinctrl-names = "default";

				#address-cells = <1>;
				#size-cells = <0>;

				status = "disabled";
			};

			uart5: serial@a94000 {
				compatible = "qcom,geni-uart";
				reg = <0x0 0x00a94000 0x0 0x4000>;

				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;

				clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
				clock-names = "se";

				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>;
				interconnect-names = "qup-core",
						     "qup-config";

				pinctrl-0 = <&qup_uart5_default>, <&qup_uart5_cts_rts>;
				pinctrl-names = "default";

				status = "disabled";
			};

			uart6: serial@a98000 {
				compatible = "qcom,geni-uart";
				reg = <0x0 0x00a98000 0x0 0x4000>;

				interrupts = <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH>;

				clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>;
				clock-names = "se";

				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>;
				interconnect-names = "qup-core",
						     "qup-config";

				pinctrl-0 = <&qup_uart6_default>, <&qup_uart6_cts_rts>;
				pinctrl-names = "default";

				status = "disabled";
			};

			i2c7: i2c@a9c000 {
				compatible = "qcom,geni-i2c";
				reg = <0x0 0x00a9c000 0x0 0x4000>;

				interrupts = <GIC_SPI 579 IRQ_TYPE_LEVEL_HIGH>;

				clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>;
				clock-names = "se";

				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>,
						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
				interconnect-names = "qup-core",
						     "qup-config",
						     "qup-memory";

				dmas = <&gpi_dma1 0 7 QCOM_GPI_I2C>,
				       <&gpi_dma1 1 7 QCOM_GPI_I2C>;
				dma-names = "tx",
					    "rx";

				pinctrl-0 = <&qup_i2c7_data_clk>;
				pinctrl-names = "default";

				#address-cells = <1>;
				#size-cells = <0>;

				status = "disabled";
			};

			spi7: spi@a9c000 {
				compatible = "qcom,geni-spi";
				reg = <0x0 0x00a9c000 0x0 0x4000>;

				interrupts = <GIC_SPI 579 IRQ_TYPE_LEVEL_HIGH>;

				clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>;
				clock-names = "se";

				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>,
						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
				interconnect-names = "qup-core",
						     "qup-config",
						     "qup-memory";

				dmas = <&gpi_dma1 0 7 QCOM_GPI_SPI>,
				       <&gpi_dma1 1 7 QCOM_GPI_SPI>;
				dma-names = "tx",
					    "rx";

				pinctrl-0 = <&qup_spi7_data_clk>, <&qup_spi7_cs>;
				pinctrl-names = "default";

				#address-cells = <1>;
				#size-cells = <0>;

				status = "disabled";
			};
		};

		sdhc_1: mmc@f44000 {
			compatible = "qcom,eliza-sdhci", "qcom,sdhci-msm-v5";
			reg = <0x0 0x00f44000 0x0 0x1000>,
			      <0x0 0x00f45000 0x0 0x1000>;
			reg-names = "hc",
				    "cqhci";

			interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH>;
			interrupt-names = "hc_irq",
					  "pwr_irq";

			clocks = <&gcc GCC_SDCC1_AHB_CLK>,
				 <&gcc GCC_SDCC1_APPS_CLK>,
				 <&rpmhcc RPMH_CXO_CLK>;
			clock-names = "iface",
				      "core",
				      "xo";

			interconnects = <&aggre2_noc MASTER_SDCC_1 QCOM_ICC_TAG_ALWAYS
					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
					 &config_noc 30 /*TODO: SLAVE_SDCC_1*/ QCOM_ICC_TAG_ACTIVE_ONLY>;
			interconnect-names = "sdhc-ddr",
					     "cpu-sdhc";

			power-domains = <&rpmhpd RPMHPD_CX>;
			operating-points-v2 = <&sdhc1_opp_table>;

			qcom,dll-config = <0x000f44ec>;
			qcom,ddr-config = <0x80040868>;

			iommus = <&apps_smmu 0x520 0x0>;
			dma-coherent;

			bus-width = <8>;

			resets = <&gcc GCC_SDCC1_BCR>;

			status = "disabled";

			sdhc1_opp_table: opp-table {
				compatible = "operating-points-v2";

				opp-100000000 {
					opp-hz = /bits/ 64 <100000000>;
					required-opps = <&rpmhpd_opp_low_svs>;
				};

				opp-384000000 {
					opp-hz = /bits/ 64 <384000000>;
					required-opps = <&rpmhpd_opp_svs_l1>;
				};
			};
		};

		cnoc_main: interconnect@1500000 {
			compatible = "qcom,eliza-cnoc-main";
			reg = <0x0 0x01500000 0x0 0x16080>;
			qcom,bcm-voters = <&apps_bcm_voter>;
			#interconnect-cells = <2>;
		};

		config_noc: interconnect@1600000 {
			compatible = "qcom,eliza-cnoc-cfg";
			reg = <0x0 0x01600000 0x0 0x5200>;
			qcom,bcm-voters = <&apps_bcm_voter>;
			#interconnect-cells = <2>;
		};

		system_noc: interconnect@1680000 {
			compatible = "qcom,eliza-system-noc";
			reg = <0x0 0x01680000 0x0 0x40000>;
			qcom,bcm-voters = <&apps_bcm_voter>;
			#interconnect-cells = <2>;
		};

		pcie_noc: interconnect@16c0000 {
			compatible = "qcom,eliza-pcie-anoc";
			reg = <0x0 0x016c0000 0x0 0x11400>;
			qcom,bcm-voters = <&apps_bcm_voter>;
			clocks = <&gcc GCC_AGGRE_NOC_PCIE_AXI_CLK>,
				 <&gcc GCC_CFG_NOC_PCIE_ANOC_AHB_CLK>;
			#interconnect-cells = <2>;
		};

		aggre1_noc: interconnect@16e0000 {
			compatible = "qcom,eliza-aggre1-noc";
			reg = <0x0 0x016e0000 0x0 0x16400>;
			qcom,bcm-voters = <&apps_bcm_voter>;
			clocks = <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>,
				 <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>;
			#interconnect-cells = <2>;
		};

		aggre2_noc: interconnect@1700000 {
			compatible = "qcom,eliza-aggre2-noc";
			reg = <0x0 0x01700000 0x0 0x1f400>;
			qcom,bcm-voters = <&apps_bcm_voter>;
			clocks = <&rpmhcc RPMH_IPA_CLK>;
			#interconnect-cells = <2>;
		};

		mmss_noc: interconnect@1780000 {
			compatible = "qcom,eliza-mmss-noc";
			reg = <0x0 0x01780000 0x0 0x7d800>;
			qcom,bcm-voters = <&apps_bcm_voter>;
			#interconnect-cells = <2>;
		};

		ufs_mem_phy: phy@1d80000 {
			compatible = "qcom,eliza-qmp-ufs-phy",
				     "qcom,sm8650-qmp-ufs-phy";
			reg = <0x0 0x01d80000 0x0 0x2000>;

			clocks = <&rpmhcc RPMH_CXO_CLK>,
				 <&gcc GCC_UFS_PHY_PHY_AUX_CLK>,
				 <&tcsr TCSR_UFS_CLKREF_EN>;
			clock-names = "ref",
				      "ref_aux",
				      "qref";

			resets = <&ufs_mem_hc 0>;
			reset-names = "ufsphy";

			power-domains = <&gcc GCC_UFS_MEM_PHY_GDSC>;

			#clock-cells = <1>;
			#phy-cells = <0>;

			status = "disabled";
		};

		ufs_mem_hc: ufshc@1d84000 {
			compatible = "qcom,eliza-ufshc",
				     "qcom,ufshc",
				     "jedec,ufs-2.0";
			reg = <0x0 0x01d84000 0x0 0x3000>,
			      <0x0 0x01da0000 0x0 0x15000>;
			reg-names = "std",
				    "mcq";

			interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;

			clocks = <&gcc GCC_UFS_PHY_AXI_CLK>,
				 <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>,
				 <&gcc GCC_UFS_PHY_AHB_CLK>,
				 <&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>,
				 <&rpmhcc RPMH_LN_BB_CLK3>,
				 <&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>,
				 <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>,
				 <&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>;
			clock-names = "core_clk",
				      "bus_aggr_clk",
				      "iface_clk",
				      "core_clk_unipro",
				      "ref_clk",
				      "tx_lane0_sync_clk",
				      "rx_lane0_sync_clk",
				      "rx_lane1_sync_clk";

			operating-points-v2 = <&ufs_opp_table>;

			resets = <&gcc GCC_UFS_PHY_BCR>;
			reset-names = "rst";

			interconnects = <&aggre1_noc MASTER_UFS_MEM QCOM_ICC_TAG_ALWAYS
					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
					 &config_noc SLAVE_UFS_MEM_CFG QCOM_ICC_TAG_ACTIVE_ONLY>;
			interconnect-names = "ufs-ddr",
					     "cpu-ufs";

			power-domains = <&gcc GCC_UFS_PHY_GDSC>;
			required-opps = <&rpmhpd_opp_nom>;

			iommus = <&apps_smmu 0x60 0x0>;
			dma-coherent;

			msi-parent = <&gic_its 0x60>;

			lanes-per-direction = <2>;
			qcom,ice = <&ice>;

			phys = <&ufs_mem_phy>;
			phy-names = "ufsphy";

			#reset-cells = <1>;

			status = "disabled";

			ufs_opp_table: opp-table {
				compatible = "operating-points-v2";

				opp-100000000 {
					opp-hz = /bits/ 64 <100000000>,
						 /bits/ 64 <0>,
						 /bits/ 64 <0>,
						 /bits/ 64 <100000000>,
						 /bits/ 64 <0>,
						 /bits/ 64 <0>,
						 /bits/ 64 <0>,
						 /bits/ 64 <0>;
					required-opps = <&rpmhpd_opp_low_svs>;
				};

				opp-201500000 {
					opp-hz = /bits/ 64 <201500000>,
						 /bits/ 64 <0>,
						 /bits/ 64 <0>,
						 /bits/ 64 <201500000>,
						 /bits/ 64 <0>,
						 /bits/ 64 <0>,
						 /bits/ 64 <0>,
						 /bits/ 64 <0>;
					required-opps = <&rpmhpd_opp_svs_l1>;
				};

				opp-403000000 {
					opp-hz = /bits/ 64 <403000000>,
						 /bits/ 64 <0>,
						 /bits/ 64 <0>,
						 /bits/ 64 <403000000>,
						 /bits/ 64 <0>,
						 /bits/ 64 <0>,
						 /bits/ 64 <0>,
						 /bits/ 64 <0>;
					required-opps = <&rpmhpd_opp_nom>;
				};
			};
		};

		ice: crypto@1d88000 {
			compatible = "qcom,eliza-inline-crypto-engine",
				     "qcom,inline-crypto-engine";
			reg = <0x0 0x01d88000 0x0 0x18000>;

			clocks = <&gcc GCC_UFS_PHY_ICE_CORE_CLK>,
				 <&gcc GCC_UFS_PHY_AHB_CLK>;
			clock-names = "core",
				      "iface";
			power-domains = <&gcc GCC_UFS_PHY_GDSC>;
		};

		cryptobam: dma-controller@1dc4000 {
			compatible = "qcom,bam-v1.7.4", "qcom,bam-v1.7.0";
			reg = <0x0 0x01dc4000 0x0 0x28000>;

			interrupts = <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>;

			#dma-cells = <1>;

			iommus = <&apps_smmu 0x480 0>,
				 <&apps_smmu 0x481 0>;

			qcom,ee = <0>;
			qcom,num-ees = <4>;
			num-channels = <20>;
			qcom,controlled-remotely;
		};

		crypto: crypto@1dfa000 {
			compatible = "qcom,eliza-qce", "qcom,sm8150-qce", "qcom,qce";
			reg = <0x0 0x01dfa000 0x0 0x6000>;

			interconnects = <&aggre2_noc MASTER_CRYPTO QCOM_ICC_TAG_ALWAYS
					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
			interconnect-names = "memory";

			dmas = <&cryptobam 4>, <&cryptobam 5>;
			dma-names = "rx", "tx";

			iommus = <&apps_smmu 0x480 0>,
				 <&apps_smmu 0x481 0>;
		};

		tcsr_mutex: hwlock@1f40000 {
			compatible = "qcom,tcsr-mutex";
			reg = <0x0 0x01f40000 0x0 0x20000>;
			#hwlock-cells = <1>;
		};

		tcsr: clock-controller@1fbf000 {
			compatible = "qcom,eliza-tcsr", "syscon";
			reg = <0x0 0x01fbf000 0x0 0x21000>;

			clocks = <&rpmhcc RPMH_CXO_CLK>;

			#clock-cells = <1>;
			#reset-cells = <1>;
		};

		remoteproc_adsp: remoteproc@3000000 {
			compatible = "qcom,eliza-adsp-pas", "qcom,sm8550-adsp-pas";
			reg = <0x0 0x03000000 0x0 0x10000>;

			interrupts-extended = <&pdc 6 IRQ_TYPE_EDGE_RISING>,
					      <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>,
					      <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>,
					      <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>,
					      <&smp2p_adsp_in 3 IRQ_TYPE_EDGE_RISING>,
					      <&smp2p_adsp_in 7 IRQ_TYPE_EDGE_RISING>;
			interrupt-names = "wdog",
					  "fatal",
					  "ready",
					  "handover",
					  "stop-ack",
					  "shutdown-ack";

			clocks = <&rpmhcc RPMH_CXO_CLK>;
			clock-names = "xo";

			power-domains = <&rpmhpd RPMHPD_LCX>,
					<&rpmhpd RPMHPD_LMX>;
			power-domain-names = "lcx",
					     "lmx";

			interconnects = <&lpass_lpicx_noc MASTER_LPASS_PROC QCOM_ICC_TAG_ALWAYS
					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;

			memory-region = <&adspslpi_mem>, <&q6_adsp_dtb_mem>;

			qcom,qmp = <&aoss_qmp>;

			qcom,smem-states = <&smp2p_adsp_out 0>;
			qcom,smem-state-names = "stop";

			status = "disabled";

			glink-edge {
				interrupts-extended = <&ipcc IPCC_CLIENT_LPASS
							     IPCC_MPROC_SIGNAL_GLINK_QMP
							     IRQ_TYPE_EDGE_RISING>;
				mboxes = <&ipcc IPCC_CLIENT_LPASS
						IPCC_MPROC_SIGNAL_GLINK_QMP>;

				label = "lpass";
				qcom,remote-pid = <2>;

				gpr {
					compatible = "qcom,gpr";
					qcom,glink-channels = "adsp_apps";
					qcom,domain = <GPR_DOMAIN_ID_ADSP>;
					qcom,intents = <512 20>;
					#address-cells = <1>;
					#size-cells = <0>;

					q6apm: service@1 {
						compatible = "qcom,q6apm";
						reg = <GPR_APM_MODULE_IID>;
						#sound-dai-cells = <0>;
						qcom,protection-domain = "avs/audio",
									 "msm/adsp/audio_pd";

						q6apmbedai: bedais {
							compatible = "qcom,q6apm-lpass-dais";
							#sound-dai-cells = <1>;
						};

						q6apmdai: dais {
							compatible = "qcom,q6apm-dais";
							iommus = <&apps_smmu 0x1001 0x80>,
								 <&apps_smmu 0x1061 0x0>;
						};
					};

					q6prm: service@2 {
						compatible = "qcom,q6prm";
						reg = <GPR_PRM_MODULE_IID>;
						qcom,protection-domain = "avs/audio",
									 "msm/adsp/audio_pd";

						q6prmcc: clock-controller {
							compatible = "qcom,q6prm-lpass-clocks";
							#clock-cells = <2>;
						};
					};
				};
			};
		};

		lpass_wsamacro: codec@6b00000 {
			compatible = "qcom,eliza-lpass-wsa-macro",
				     "qcom,sm8550-lpass-wsa-macro";
			reg = <0x0 0x06b00000 0x0 0x1000>;

			clocks = <&q6prmcc LPASS_CLK_ID_WSA_CORE_TX_MCLK
					   LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
				 <&q6prmcc LPASS_HW_MACRO_VOTE
					   LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
				 <&q6prmcc LPASS_HW_DCODEC_VOTE
					   LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
				 <&lpass_vamacro>;
			clock-names = "mclk",
				      "macro",
				      "dcodec",
				      "fsgen";

			#clock-cells = <0>;
			clock-output-names = "mclk";
			#sound-dai-cells = <1>;
		};

		swr0: soundwire@6b10000 {
			compatible = "qcom,soundwire-v2.1.0",
				     "qcom,soundwire-v2.0.0";
			reg = <0x0 0x06b10000 0x0 0x10000>;
			interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;

			clocks = <&lpass_wsamacro>;
			clock-names = "iface";

			label = "WSA";

			qcom,din-ports = <4>;
			qcom,dout-ports = <9>;

			qcom,ports-sinterval =
				/bits/ 16 <0x07 0x1f 0x3f 0x07 0x1f 0x3f
					   0x18f 0x18f 0x18f 0x0f 0x0f 0xff 0x31f>;
			qcom,ports-offset1 =
				/bits/ 8 <0x01 0x03 0x05 0x02 0x04 0x15
					  0x00 0x00 0x00 0x06 0x0d 0xff 0x00>;
			qcom,ports-offset2 =
				/bits/ 8 <0xff 0x07 0x1f 0xff 0x07 0x1f
					  0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
			qcom,ports-hstart =
				/bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff
					  0x08 0x0e 0x0e 0xff 0xff 0xff 0x0f>;
			qcom,ports-hstop =
				/bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff
					  0x08 0x0e 0x0e 0xff 0xff 0xff 0x0f>;
			qcom,ports-word-length =
				/bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff
					  0x08 0x0f 0x0f 0x00 0xff 0xff 0x18>;
			qcom,ports-block-pack-mode =
				/bits/ 8 <0x00 0x01 0x01 0x00 0x01 0x01
					  0x00 0x01 0x01 0x01 0x01 0x00 0x00>;
			qcom,ports-block-group-count =
				/bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff
					  0xff 0x00 0x00 0xff 0xff 0xff 0xff>;
			qcom,ports-lane-control =
				/bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff
					  0xff 0x00 0x00 0xff 0xff 0xff 0xff>;

			#address-cells = <2>;
			#size-cells = <0>;
			#sound-dai-cells = <1>;

			status = "disabled";
		};

		lpass_lpiaon_noc: interconnect@7400000 {
			compatible = "qcom,eliza-lpass-lpiaon-noc";
			reg = <0x0 0x07400000 0x0 0x19080>;
			qcom,bcm-voters = <&apps_bcm_voter>;
			#interconnect-cells = <2>;
		};

		lpass_lpicx_noc: interconnect@7420000 {
			compatible = "qcom,eliza-lpass-lpicx-noc";
			reg = <0x0 0x07420000 0x0 0x44080>;
			qcom,bcm-voters = <&apps_bcm_voter>;
			#interconnect-cells = <2>;
		};

		lpass_vamacro: codec@7660000 {
			compatible = "qcom,eliza-lpass-va-macro",
				     "qcom,sm8550-lpass-va-macro";
			reg = <0x0 0x07660000 0x0 0x2000>;

			clocks = <&q6prmcc LPASS_CLK_ID_TX_CORE_MCLK
					   LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
				 <&q6prmcc LPASS_HW_MACRO_VOTE
					   LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
				 <&q6prmcc LPASS_HW_DCODEC_VOTE
					   LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
			clock-names = "mclk",
				      "macro",
				      "dcodec";

			#clock-cells = <0>;
			clock-output-names = "fsgen";
			#sound-dai-cells = <1>;
		};

		lpass_tlmm: pinctrl@7760000 {
			compatible = "qcom,eliza-lpass-lpi-pinctrl";
			reg = <0x0 0x07760000 0x0 0x20000>;

			clocks = <&q6prmcc LPASS_HW_MACRO_VOTE
					   LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
				 <&q6prmcc LPASS_HW_DCODEC_VOTE
					   LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
			clock-names = "core", "audio";

			gpio-controller;
			#gpio-cells = <2>;
			gpio-ranges = <&lpass_tlmm 0 0 23>;

			dmic01_default: dmic01-default-state {
				clk-pins {
					pins = "gpio6";
					function = "dmic1_clk";
					drive-strength = <8>;
					output-high;
				};

				data-pins {
					pins = "gpio7";
					function = "dmic1_data";
					drive-strength = <8>;
					input-enable;
				};
			};

			dmic23_default: dmic23-default-state {
				clk-pins {
					pins = "gpio8";
					function = "dmic2_clk";
					drive-strength = <8>;
					output-high;
				};

				data-pins {
					pins = "gpio9";
					function = "dmic2_data";
					drive-strength = <8>;
					input-enable;
				};
			};

			dmic45_default: dmic45-default-state {
				clk-pins {
					pins = "gpio12";
					function = "dmic3_clk";
					drive-strength = <8>;
					output-high;
				};

				data-pins {
					pins = "gpio13";
					function = "dmic3_data";
					drive-strength = <8>;
					input-enable;
				};
			};

			dmic67_default: dmic67-default-state {
				clk-pins {
					pins = "gpio21";
					function = "dmic4_clk";
					drive-strength = <8>;
					output-high;
				};

				data-pins {
					pins = "gpio22";
					function = "dmic4_data";
					drive-strength = <8>;
					input-enable;
				};
			};

			wsa_swr_active: wsa-swr-active-state {
				clk-pins {
					pins = "gpio10";
					function = "wsa_swr_clk";
					drive-strength = <2>;
					slew-rate = <1>;
					bias-disable;
				};

				data-pins {
					pins = "gpio11";
					function = "wsa_swr_data";
					drive-strength = <2>;
					slew-rate = <1>;
					bias-bus-hold;
				};
			};
		};

		sdhc_2: mmc@8804000 {
			compatible = "qcom,eliza-sdhci", "qcom,sdhci-msm-v5";
			reg = <0x0 0x08804000 0x0 0x1000>;

			interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
			interrupt-names = "hc_irq",
					  "pwr_irq";

			clocks = <&gcc GCC_SDCC2_AHB_CLK>,
				 <&gcc GCC_SDCC2_APPS_CLK>,
				 <&rpmhcc RPMH_CXO_CLK>;
			clock-names = "iface",
				      "core",
				      "xo";

			interconnects = <&aggre2_noc MASTER_SDCC_2 QCOM_ICC_TAG_ALWAYS
					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
					 &config_noc SLAVE_SDCC_2 QCOM_ICC_TAG_ACTIVE_ONLY>;
			interconnect-names = "sdhc-ddr",
					     "cpu-sdhc";

			power-domains = <&rpmhpd RPMHPD_CX>;
			operating-points-v2 = <&sdhc2_opp_table>;

			qcom,dll-config = <0x0007442c>;
			qcom,ddr-config = <0x80040868>;

			iommus = <&apps_smmu 0x540 0x0>;
			dma-coherent;

			bus-width = <4>;

			resets = <&gcc GCC_SDCC2_BCR>;

			status = "disabled";

			sdhc2_opp_table: opp-table {
				compatible = "operating-points-v2";

				opp-100000000 {
					opp-hz = /bits/ 64 <100000000>;
					required-opps = <&rpmhpd_opp_low_svs>;
				};

				opp-202000000 {
					opp-hz = /bits/ 64 <202000000>;
					required-opps = <&rpmhpd_opp_svs_l1>;
				};
			};
		};

		usb_hsphy: phy@88e3000 {
			compatible = "qcom,eliza-snps-eusb2-phy",
				     "qcom,sm8550-snps-eusb2-phy";
			reg = <0x0 0x088e3000 0x0 0x154>;
			#phy-cells = <0>;

			clocks = <&tcsr TCSR_USB2_CLKREF_EN>;
			clock-names = "ref";

			resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>;

			status = "disabled";
		};

		usb_dp_qmpphy: phy@88e8000 {
			compatible = "qcom,eliza-qmp-usb3-dp-phy",
				     "qcom,sm8650-qmp-usb3-dp-phy";
			reg = <0x0 0x088e8000 0x0 0x4000>;

			clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>,
				 <&tcsr TCSR_USB3_CLKREF_EN>,
				 <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>,
				 <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
			clock-names = "aux",
				      "ref",
				      "com_aux",
				      "usb3_pipe";

			resets = <&gcc GCC_USB3_PHY_PRIM_BCR>,
				 <&gcc GCC_USB3_DP_PHY_PRIM_BCR>;
			reset-names = "phy",
				      "common";

			power-domains = <&gcc GCC_USB3_PHY_GDSC>;

			#clock-cells = <1>;
			#phy-cells = <1>;

			mode-switch;
			orientation-switch;

			status = "disabled";

			ports {
				#address-cells = <1>;
				#size-cells = <0>;

				port@0 {
					reg = <0>;

					usb_dp_qmpphy_out: endpoint {
					};
				};

				port@1 {
					reg = <1>;

					usb_dp_qmpphy_usb_ss_in: endpoint {
						remote-endpoint = <&usb_dwc3_ss>;
					};
				};

				port@2 {
					reg = <2>;

					usb_dp_qmpphy_dp_in: endpoint {
						remote-endpoint = <&mdss_dp0_out>;
					};
				};
			};
		};

		usb: usb@a600000 {
			compatible = "qcom,eliza-dwc3", "qcom,snps-dwc3";
			reg = <0x0 0x0a600000 0x0 0xfc100>;

			interrupts-extended = <&intc GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>,
					      <&intc GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
					      <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
					      <&pdc 14 IRQ_TYPE_EDGE_BOTH>,
					      <&pdc 15 IRQ_TYPE_EDGE_BOTH>,
					      <&pdc 17 IRQ_TYPE_LEVEL_HIGH>;
			interrupt-names = "dwc_usb3",
					  "pwr_event",
					  "hs_phy_irq",
					  "dp_hs_phy_irq",
					  "dm_hs_phy_irq",
					  "ss_phy_irq";

			clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>,
				 <&gcc GCC_USB30_PRIM_MASTER_CLK>,
				 <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>,
				 <&gcc GCC_USB30_PRIM_SLEEP_CLK>,
				 <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
				 <&rpmhcc RPMH_CXO_CLK>;
			clock-names = "cfg_noc",
				      "core",
				      "iface",
				      "sleep",
				      "mock_utmi",
				      "xo";

			assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
					  <&gcc GCC_USB30_PRIM_MASTER_CLK>;
			assigned-clock-rates = <19200000>,
					       <200000000>;

			resets = <&gcc GCC_USB30_PRIM_BCR>;

			phys = <&usb_hsphy>,
			       <&usb_dp_qmpphy QMP_USB43DP_USB3_PHY>;
			phy-names = "usb2-phy",
				    "usb3-phy";

			interconnects = <&aggre1_noc MASTER_USB3_0 QCOM_ICC_TAG_ALWAYS
					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
					 &config_noc SLAVE_USB3_0 QCOM_ICC_TAG_ACTIVE_ONLY>;
			interconnect-names = "usb-ddr", "apps-usb";

			iommus = <&apps_smmu 0x40 0x0>;

			power-domains = <&gcc GCC_USB30_PRIM_GDSC>;
			required-opps = <&rpmhpd_opp_nom>;

			snps,hird-threshold = /bits/ 8 <0x0>;
			snps,usb2-gadget-lpm-disable;
			snps,dis_u2_susphy_quirk;
			snps,dis_enblslpm_quirk;
			snps,dis-u1-entry-quirk;
			snps,dis-u2-entry-quirk;
			snps,is-utmi-l1-suspend;
			snps,usb3_lpm_capable;
			snps,usb2-lpm-disable;
			snps,has-lpm-erratum;
			tx-fifo-resize;

			dma-coherent;
			usb-role-switch;

			status = "disabled";

			ports {
				#address-cells = <1>;
				#size-cells = <0>;

				port@0 {
					reg = <0>;

					usb_dwc3_hs: endpoint {
					};
				};

				port@1 {
					reg = <1>;

					usb_dwc3_ss: endpoint {
						remote-endpoint = <&usb_dp_qmpphy_usb_ss_in>;
					};
				};
			};
		};

		mdss: display-subsystem@ae00000 {
			compatible = "qcom,eliza-mdss";
			reg = <0x0 0x0ae00000 0x0 0x1000>;
			reg-names = "mdss";
			ranges;

			interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;

			clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
				 <&gcc GCC_DISP_HF_AXI_CLK>,
				 <&dispcc DISP_CC_MDSS_MDP_CLK>;

			resets = <&dispcc DISP_CC_MDSS_CORE_BCR>;

			interconnects = <&mmss_noc MASTER_MDP QCOM_ICC_TAG_ALWAYS
					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
					 &config_noc SLAVE_DISPLAY_CFG QCOM_ICC_TAG_ACTIVE_ONLY>;
			interconnect-names = "mdp0-mem",
					     "cpu-cfg";

			power-domains = <&dispcc MDSS_GDSC>;

			iommus = <&apps_smmu 0x800 0x2>;

			interrupt-controller;
			#interrupt-cells = <1>;

			#address-cells = <2>;
			#size-cells = <2>;

			status = "disabled";

			mdss_mdp: display-controller@ae01000 {
				compatible = "qcom,eliza-dpu";
				reg = <0x0 0x0ae01000 0x0 0x93000>,
				      <0x0 0x0aeb0000 0x0 0x3000>;
				reg-names = "mdp",
					    "vbif";

				interrupts-extended = <&mdss 0>;

				clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
					 <&dispcc DISP_CC_MDSS_AHB_CLK>,
					 <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>,
					 <&dispcc DISP_CC_MDSS_MDP_CLK>,
					 <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
				clock-names = "nrt_bus",
					      "iface",
					      "lut",
					      "core",
					      "vsync";

				assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
				assigned-clock-rates = <19200000>;

				operating-points-v2 = <&mdp_opp_table>;

				power-domains = <&rpmhpd RPMHPD_CX>;

				ports {
					#address-cells = <1>;
					#size-cells = <0>;

					port@0 {
						reg = <0>;

						dpu_intf1_out: endpoint {
							remote-endpoint = <&mdss_dsi0_in>;
						};
					};

					port@1 {
						reg = <1>;

						dpu_intf2_out: endpoint {
							remote-endpoint = <&mdss_dsi1_in>;
						};
					};

					port@2 {
						reg = <2>;

						dpu_intf0_out: endpoint {
							remote-endpoint = <&mdss_dp0_in>;
						};
					};
					/* TODO: HDMI */
				};

				mdp_opp_table: opp-table {
					compatible = "operating-points-v2";

					opp-150000000 {
						opp-hz = /bits/ 64 <150000000>;
						required-opps = <&rpmhpd_opp_low_svs_d1>;
					};

					opp-207000000 {
						opp-hz = /bits/ 64 <207000000>;
						required-opps = <&rpmhpd_opp_low_svs>;
					};

					opp-342000000 {
						opp-hz = /bits/ 64 <342000000>;
						required-opps = <&rpmhpd_opp_svs>;
					};

					opp-417000000 {
						opp-hz = /bits/ 64 <417000000>;
						required-opps = <&rpmhpd_opp_svs_l1>;
					};

					opp-532000000 {
						opp-hz = /bits/ 64 <532000000>;
						required-opps = <&rpmhpd_opp_nom>;
					};

					opp-600000000 {
						opp-hz = /bits/ 64 <600000000>;
						required-opps = <&rpmhpd_opp_nom_l1>;
					};

					opp-660000000 {
						opp-hz = /bits/ 64 <660000000>;
						required-opps = <&rpmhpd_opp_turbo>;
					};
				};
			};

			mdss_dsi0: dsi@ae94000 {
				compatible = "qcom,eliza-dsi-ctrl", "qcom,sm8750-dsi-ctrl",
					     "qcom,mdss-dsi-ctrl";
				reg = <0x0 0x0ae94000 0x0 0x400>;
				reg-names = "dsi_ctrl";

				interrupts-extended = <&mdss 4>;

				clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
					 <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
					 <&dispcc DISP_CC_MDSS_PCLK0_CLK>,
					 <&dispcc DISP_CC_MDSS_ESC0_CLK>,
					 <&dispcc DISP_CC_MDSS_AHB_CLK>,
					 <&gcc GCC_DISP_HF_AXI_CLK>,
					 <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>,
					 <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>,
					 <&dispcc DISP_CC_ESYNC0_CLK>,
					 <&dispcc DISP_CC_OSC_CLK>,
					 <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>,
					 <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
				clock-names = "byte",
					      "byte_intf",
					      "pixel",
					      "core",
					      "iface",
					      "bus",
					      "dsi_pll_pixel",
					      "dsi_pll_byte",
					      "esync",
					      "osc",
					      "byte_src",
					      "pixel_src";

				operating-points-v2 = <&mdss_dsi_opp_table>;

				phys = <&mdss_dsi0_phy>;
				phy-names = "dsi";

				#address-cells = <1>;
				#size-cells = <0>;

				status = "disabled";

				ports {
					#address-cells = <1>;
					#size-cells = <0>;

					port@0 {
						reg = <0>;

						mdss_dsi0_in: endpoint {
							remote-endpoint = <&dpu_intf1_out>;
						};
					};

					port@1 {
						reg = <1>;

						mdss_dsi0_out: endpoint {
						};
					};
				};

				mdss_dsi_opp_table: opp-table {
					compatible = "operating-points-v2";

					opp-140630000 {
						opp-hz = /bits/ 64 <140630000>;
						required-opps = <&rpmhpd_opp_low_svs_d1>;
					};

					opp-187500000 {
						opp-hz = /bits/ 64 <187500000>;
						required-opps = <&rpmhpd_opp_low_svs>;
					};

					opp-300000000 {
						opp-hz = /bits/ 64 <300000000>;
						required-opps = <&rpmhpd_opp_svs>;
					};

					opp-358000000 {
						opp-hz = /bits/ 64 <358000000>;
						required-opps = <&rpmhpd_opp_svs_l1>;
					};
				};
			};

			mdss_dsi0_phy: phy@ae95000 {
				compatible = "qcom,eliza-dsi-phy-4nm", "qcom,sm8650-dsi-phy-4nm";
				reg = <0x0 0x0ae95000 0x0 0x200>,
				      <0x0 0x0ae95200 0x0 0x300>,
				      <0x0 0x0ae95500 0x0 0x400>;
				reg-names = "dsi_phy",
					    "dsi_phy_lane",
					    "dsi_pll";

				clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
					 <&bi_tcxo_div2>;
				clock-names = "iface",
					      "ref";

				#clock-cells = <1>;
				#phy-cells = <0>;

				status = "disabled";
			};

			mdss_dsi1: dsi@ae96000 {
				compatible = "qcom,eliza-dsi-ctrl", "qcom,sm8750-dsi-ctrl",
					     "qcom,mdss-dsi-ctrl";
				reg = <0x0 0x0ae96000 0x0 0x400>;
				reg-names = "dsi_ctrl";

				interrupts-extended = <&mdss 5>;

				clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK>,
					 <&dispcc DISP_CC_MDSS_BYTE1_INTF_CLK>,
					 <&dispcc DISP_CC_MDSS_PCLK1_CLK>,
					 <&dispcc DISP_CC_MDSS_ESC1_CLK>,
					 <&dispcc DISP_CC_MDSS_AHB_CLK>,
					 <&gcc GCC_DISP_HF_AXI_CLK>,
					 <&mdss_dsi1_phy DSI_PIXEL_PLL_CLK>,
					 <&mdss_dsi1_phy DSI_BYTE_PLL_CLK>,
					 <&dispcc DISP_CC_ESYNC1_CLK>,
					 <&dispcc DISP_CC_OSC_CLK>,
					 <&dispcc DISP_CC_MDSS_BYTE1_CLK_SRC>,
					 <&dispcc DISP_CC_MDSS_PCLK1_CLK_SRC>;
				clock-names = "byte",
					      "byte_intf",
					      "pixel",
					      "core",
					      "iface",
					      "bus",
					      "dsi_pll_pixel",
					      "dsi_pll_byte",
					      "esync",
					      "osc",
					      "byte_src",
					      "pixel_src";

				operating-points-v2 = <&mdss_dsi_opp_table>;

				phys = <&mdss_dsi1_phy>;
				phy-names = "dsi";

				#address-cells = <1>;
				#size-cells = <0>;

				status = "disabled";

				ports {
					#address-cells = <1>;
					#size-cells = <0>;

					port@0 {
						reg = <0>;

						mdss_dsi1_in: endpoint {
							remote-endpoint = <&dpu_intf2_out>;
						};
					};

					port@1 {
						reg = <1>;

						mdss_dsi1_out: endpoint {
						};
					};
				};
			};

			mdss_dsi1_phy: phy@ae97000 {
				compatible = "qcom,eliza-dsi-phy-4nm", "qcom,sm8650-dsi-phy-4nm";
				reg = <0x0 0x0ae97000 0x0 0x200>,
				      <0x0 0x0ae97200 0x0 0x300>,
				      <0x0 0x0ae97500 0x0 0x400>;
				reg-names = "dsi_phy",
					    "dsi_phy_lane",
					    "dsi_pll";

				clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
					 <&bi_tcxo_div2>;
				clock-names = "iface",
					      "ref";

				#clock-cells = <1>;
				#phy-cells = <0>;

				status = "disabled";
			};

			mdss_dp0: displayport-controller@af54000 {
				compatible = "qcom,eliza-dp", "qcom,sm8650-dp";
				reg = <0x0 0x0af54000 0x0 0x200>,
				      <0x0 0x0af54200 0x0 0x200>,
				      <0x0 0x0af55000 0x0 0xc00>,
				      <0x0 0x0af56000 0x0 0x400>,
				      <0x0 0x0af57000 0x0 0x400>,
				      <0x0 0x0af58000 0x0 0x400>,
				      <0x0 0x0af59000 0x0 0x400>,
				      <0x0 0x0af5a000 0x0 0x600>,
				      <0x0 0x0af5b000 0x0 0x600>;

				interrupts-extended = <&mdss 12>;

				clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
					 <&dispcc DISP_CC_MDSS_DPTX0_AUX_CLK>,
					 <&dispcc DISP_CC_MDSS_DPTX0_LINK_CLK>,
					 <&dispcc DISP_CC_MDSS_DPTX0_LINK_INTF_CLK>,
					 <&dispcc DISP_CC_MDSS_DPTX0_PIXEL0_CLK>,
					 <&dispcc DISP_CC_MDSS_DPTX0_PIXEL1_CLK>;
				clock-names = "core_iface",
					      "core_aux",
					      "ctrl_link",
					      "ctrl_link_iface",
					      "stream_pixel",
					      "stream_1_pixel";

				assigned-clocks = <&dispcc DISP_CC_MDSS_DPTX0_LINK_CLK_SRC>,
						  <&dispcc DISP_CC_MDSS_DPTX0_PIXEL0_CLK_SRC>,
						  <&dispcc DISP_CC_MDSS_DPTX0_PIXEL1_CLK_SRC>;
				assigned-clock-parents = <&usb_dp_qmpphy QMP_USB43DP_DP_LINK_CLK>,
							 <&usb_dp_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>,
							 <&usb_dp_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>;

				operating-points-v2 = <&dp_opp_table>;

				power-domains = <&rpmhpd RPMHPD_CX>;

				phys = <&usb_dp_qmpphy QMP_USB43DP_DP_PHY>;
				phy-names = "dp";

				#sound-dai-cells = <0>;

				status = "disabled";

				dp_opp_table: opp-table {
					compatible = "operating-points-v2";

					opp-270000000 {
						opp-hz = /bits/ 64 <270000000>;
						required-opps = <&rpmhpd_opp_low_svs>;
					};

					opp-540000000 {
						opp-hz = /bits/ 64 <540000000>;
						required-opps = <&rpmhpd_opp_svs_l1>;
					};

					opp-810000000 {
						opp-hz = /bits/ 64 <810000000>;
						required-opps = <&rpmhpd_opp_nom>;
					};
				};

				ports {
					#address-cells = <1>;
					#size-cells = <0>;

					port@0 {
						reg = <0>;

						mdss_dp0_in: endpoint {
							remote-endpoint = <&dpu_intf0_out>;
						};
					};

					port@1 {
						reg = <1>;

						mdss_dp0_out: endpoint {
							data-lanes = <0 1 2 3>;
							remote-endpoint = <&usb_dp_qmpphy_dp_in>;
						};
					};
				};
			};
		};

		dispcc: clock-controller@af00000 {
			compatible = "qcom,eliza-dispcc";
			reg = <0x0 0x0af00000 0x0 0x20000>;

			clocks = <&bi_tcxo_div2>,
				 <&bi_tcxo_ao_div2>,
				 <&gcc GCC_DISP_AHB_CLK>,
				 <&sleep_clk>,
				 <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>,
				 <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>,
				 <&mdss_dsi1_phy DSI_BYTE_PLL_CLK>,
				 <&mdss_dsi1_phy DSI_PIXEL_PLL_CLK>,
				 <&usb_dp_qmpphy QMP_USB43DP_DP_LINK_CLK>,
				 <&usb_dp_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>,
				 <0>, /* dp1 */
				 <0>,
				 <0>, /* dp2 */
				 <0>,
				 <0>, /* dp3 */
				 <0>,
				 <0>; /* HDMI phy */

			power-domains = <&rpmhpd RPMHPD_MX>;
			required-opps = <&rpmhpd_opp_low_svs>;

			#clock-cells = <1>;
			#reset-cells = <1>;
			#power-domain-cells = <1>;
		};

		lpass_ag_noc: interconnect@7e40000 {
			compatible = "qcom,eliza-lpass-ag-noc";
			reg = <0x0 0x07e40000 0x0 0xe080>;
			qcom,bcm-voters = <&apps_bcm_voter>;
			#interconnect-cells = <2>;
		};

		pdc: interrupt-controller@b220000 {
			compatible = "qcom,eliza-pdc", "qcom,pdc";
			reg = <0x0 0x0b220000 0x0 0x10000>,
			      <0x0 0x174000f0 0x0 0x64>;

			qcom,pdc-ranges = <0 480 8>, <8 719 1>, <9 718 1>,
					  <10 230 1>, <11 724 1>, <12 716 1>,
					  <13 727 1>, <14 720 1>, <15 726 1>,
					  <16 721 1>, <17 262 1>, <18 70 1>,
					  <19 723 1>, <20 234 1>, <22 725 1>,
					  <23 231 1>, <24 504 5>, <30 510 8>,
					  <40 520 6>, <51 531 4>, <58 538 2>,
					  <61 541 5>, <66 92 1>, <67 547 13>,
					  <80 240 1>, <81 235 1>, <82 310 2>,
					  <84 248 1>, <85 241 1>, <86 238 2>,
					  <88 254 1>, <89 509 1>, <90 563 1>,
					  <91 259 2>, <93 201 1>, <94 246 1>,
					  <95 93 1>, <96 611 29>, <125 63 1>,
					  <126 366 2>, <128 374 1>, <129 377 1>,
					  <130 428 1>, <131 434 2>, <133 437 1>,
					  <134 452 2>, <136 458 2>, <138 464 11>,
					  <149 671 1>, <150 688 1>, <151 714 2>,
					  <153 722 1>, <154 255 1>, <155 269 2>,
					  <157 276 1>, <158 287 1>, <159 306 4>;
			#interrupt-cells = <2>;
			interrupt-parent = <&intc>;
			interrupt-controller;
		};

		tsens0: thermal-sensor@c228000 {
			compatible = "qcom,eliza-tsens", "qcom,tsens-v2";
			reg = <0x0 0x0c228000 0x0 0x1000>,
			      <0x0 0x0c222000 0x0 0x1000>;

			interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 560 IRQ_TYPE_LEVEL_HIGH>;
			interrupt-names = "uplow",
					  "critical";

			#qcom,sensors = <13>;

			#thermal-sensor-cells = <1>;
		};

		tsens1: thermal-sensor@c229000 {
			compatible = "qcom,eliza-tsens", "qcom,tsens-v2";
			reg = <0x0 0x0c229000 0x0 0x1000>,
			      <0x0 0x0c223000 0x0 0x1000>;

			interrupts = <GIC_SPI 507 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 561 IRQ_TYPE_LEVEL_HIGH>;
			interrupt-names = "uplow",
					  "critical";

			#qcom,sensors = <14>;

			#thermal-sensor-cells = <1>;
		};

		tsens2: thermal-sensor@c22a000 {
			compatible = "qcom,eliza-tsens", "qcom,tsens-v2";
			reg = <0x0 0x0c22a000 0x0 0x1000>,
			      <0x0 0x0c224000 0x0 0x1000>;

			interrupts = <GIC_SPI 508 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 562 IRQ_TYPE_LEVEL_HIGH>;
			interrupt-names = "uplow",
					  "critical";

			#qcom,sensors = <5>;

			#thermal-sensor-cells = <1>;
		};

		aoss_qmp: power-management@c300000 {
			compatible = "qcom,eliza-aoss-qmp", "qcom,aoss-qmp";
			reg = <0x0 0x0c300000 0x0 0x400>;

			interrupts-extended = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP
						     IRQ_TYPE_EDGE_RISING>;

			mboxes = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP>;

			#clock-cells = <0>;
		};

		spmi: arbiter@c400000 {
			compatible = "qcom,eliza-spmi-pmic-arb",
				     "qcom,x1e80100-spmi-pmic-arb";
			reg = <0x0 0x0c400000 0x0 0x3000>,
			      <0x0 0x0c500000 0x0 0x400000>,
			      <0x0 0x0c440000 0x0 0x80000>;
			reg-names = "core",
				    "chnls",
				    "obsrvr";

			qcom,ee = <0>;
			qcom,channel = <0>;

			#address-cells = <2>;
			#size-cells = <2>;
			ranges;

			spmi_bus0: spmi@c42d000 {
				reg = <0x0 0x0c42d000 0x0 0x4000>,
				      <0x0 0x0c4c0000 0x0 0x10000>;
				reg-names = "cnfg",
					    "intr";

				interrupt-names = "periph_irq";
				interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>;
				interrupt-controller;
				#interrupt-cells = <4>;

				#address-cells = <2>;
				#size-cells = <0>;
			};

			spmi_bus1: spmi@c432000 {
				reg = <0x0 0x0c432000 0x0 0x4000>,
				      <0x0 0x0c4d0000 0x0 0x10000>;
				reg-names = "cnfg",
					    "intr";

				interrupt-names = "periph_irq";
				interrupts-extended = <&pdc 3 IRQ_TYPE_LEVEL_HIGH>;
				interrupt-controller;
				#interrupt-cells = <4>;

				#address-cells = <2>;
				#size-cells = <0>;
			};
		};

		tlmm: pinctrl@f100000 {
			compatible = "qcom,eliza-tlmm";
			reg = <0x0 0x0f100000 0x0 0xf00000>;

			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;

			gpio-controller;
			#gpio-cells = <2>;

			interrupt-controller;
			#interrupt-cells = <2>;

			gpio-ranges = <&tlmm 0 0 184>;
			wakeup-parent = <&pdc>;

			qup_i2c0_data_clk: qup-i2c0-data-clk-state {
				pins = "gpio28", "gpio29";
				function = "qup1_se0";
				drive-strength = <2>;
				bias-pull-up;
			};

			qup_spi0_cs: qup-spi0-cs-state {
				pins = "gpio31";
				function = "qup1_se0";
				drive-strength = <6>;
				bias-disable;
			};

			qup_spi0_data_clk: qup-spi0-data-clk-state {
				/* MISO, MOSI, CLK */
				pins = "gpio28", "gpio29", "gpio30";
				function = "qup1_se0";
				drive-strength = <6>;
				bias-disable;
			};

			qup_i2c1_data_clk: qup-i2c1-data-clk-state {
				pins = "gpio32", "gpio33";
				function = "qup1_se1";
				drive-strength = <2>;
				bias-pull-up;
			};

			qup_spi1_cs: qup-spi1-cs-state {
				pins = "gpio35";
				function = "qup1_se1";
				drive-strength = <6>;
				bias-disable;
			};

			qup_spi1_data_clk: qup-spi1-data-clk-state {
				/* MISO, MOSI, CLK */
				pins = "gpio32", "gpio33", "gpio34";
				function = "qup1_se1";
				drive-strength = <6>;
				bias-disable;
			};

			qup_i2c2_data_clk: qup-i2c2-data-clk-state {
				pins = "gpio52", "gpio53";
				function = "qup1_se2";
				drive-strength = <2>;
				bias-pull-up;
			};

			qup_spi2_cs: qup-spi2-cs-state {
				pins = "gpio55";
				function = "qup1_se2";
				drive-strength = <6>;
				bias-disable;
			};

			qup_spi2_data_clk: qup-spi2-data-clk-state {
				/* MISO, MOSI, CLK */
				pins = "gpio52", "gpio53", "gpio54";
				function = "qup1_se2";
				drive-strength = <6>;
				bias-disable;
			};

			qup_i2c3_data_clk: qup-i2c3-data-clk-state {
				pins = "gpio44", "gpio45";
				function = "qup1_se3";
				drive-strength = <2>;
				bias-pull-up;
			};

			qup_spi3_cs: qup-spi3-cs-state {
				pins = "gpio47";
				function = "qup1_se3";
				drive-strength = <6>;
				bias-disable;
			};

			qup_spi3_data_clk: qup-spi3-data-clk-state {
				/* MISO, MOSI, CLK */
				pins = "gpio44", "gpio45", "gpio46";
				function = "qup1_se3";
				drive-strength = <6>;
				bias-disable;
			};

			qup_i2c4_data_clk: qup-i2c4-data-clk-state {
				pins = "gpio36", "gpio37";
				function = "qup1_se4_01";
				drive-strength = <2>;
				bias-pull-up;
			};

			qup_spi4_clk: qup-spi4-clk-state {
				pins = "gpio37";
				function = "qup1_se4_23";
				drive-strength = <6>;
				bias-disable;
			};

			qup_spi4_cs: qup-spi4-cs-state {
				pins = "gpio36";
				function = "qup1_se4_23";
				drive-strength = <6>;
				bias-disable;
			};

			qup_spi4_data: qup-spi4-data-state {
				pins = "gpio36", "gpio37";
				function = "qup1_se4_01";
				drive-strength = <6>;
				bias-disable;
			};

			qup_uart5_default: qup-uart5-default-state {
				/* TX, RX */
				pins = "gpio134", "gpio135";
				function = "qup1_se5";
				drive-strength = <2>;
				bias-pull-up;
			};

			qup_uart5_cts_rts: qup-uart5-cts-rts-state {
				/* CTS, RTS */
				pins = "gpio132", "gpio133";
				function = "qup1_se5";
				drive-strength = <2>;
				bias-pull-down;
			};

			qup_uart6_default: qup-uart6-default-state {
				/* TX, RX */
				pins = "gpio42", "gpio40";
				function = "qup1_se6";
				drive-strength = <2>;
				bias-pull-up;
			};

			qup_uart6_cts_rts: qup-uart6-cts-rts-state {
				/* CTS, RTS */
				pins = "gpio40", "gpio42";
				function = "qup1_se6";
				drive-strength = <2>;
				bias-pull-down;
			};

			qup_i2c7_data_clk: qup-i2c7-data-clk-state {
				pins = "gpio81", "gpio80";
				function = "qup1_se7";
				drive-strength = <2>;
				bias-pull-up;
			};

			qup_spi7_cs: qup-spi7-cs-state {
				pins = "gpio78";
				function = "qup1_se7";
				drive-strength = <6>;
				bias-disable;
			};

			qup_spi7_data_clk: qup-spi7-data-clk-state {
				pins = "gpio81", "gpio80", "gpio114";
				function = "qup1_se7";
				drive-strength = <6>;
				bias-disable;
			};

			qup_i2c8_data_clk: qup-i2c8-data-clk-state {
				pins = "gpio0", "gpio1";
				function = "qup2_se0";
				drive-strength = <2>;
				bias-pull-up;
			};

			qup_spi8_cs: qup-spi8-cs-state {
				pins = "gpio3";
				function = "qup2_se0";
				drive-strength = <6>;
				bias-disable;
			};

			qup_spi8_data_clk: qup-spi8-data-clk-state {
				pins = "gpio0", "gpio1", "gpio2";
				function = "qup2_se0";
				drive-strength = <6>;
				bias-disable;
			};

			qup_i2c9_data_clk: qup-i2c9-data-clk-state {
				pins = "gpio4", "gpio5";
				function = "qup2_se1";
				drive-strength = <2>;
				bias-pull-up;
			};

			qup_spi9_cs: qup-spi9-cs-state {
				pins = "gpio7";
				function = "qup2_se1";
				drive-strength = <6>;
				bias-disable;
			};

			qup_spi9_data_clk: qup-spi9-data-clk-state {
				pins = "gpio4", "gpio5", "gpio6";
				function = "qup2_se1";
				drive-strength = <6>;
				bias-disable;
			};

			qup_i2c10_data_clk: qup-i2c10-data-clk-state {
				pins = "gpio8", "gpio9";
				function = "qup2_se2";
				drive-strength = <2>;
				bias-pull-up;
			};

			qup_spi10_cs: qup-spi10-cs-state {
				pins = "gpio11";
				function = "qup2_se2";
				drive-strength = <6>;
				bias-disable;
			};

			qup_spi10_data_clk: qup-spi10-data-clk-state {
				pins = "gpio8", "gpio9", "gpio10";
				function = "qup2_se2";
				drive-strength = <6>;
				bias-disable;
			};

			qup_i2c11_data_clk: qup-i2c11-data-clk-state {
				pins = "gpio79", "gpio97";
				function = "qup2_se3";
				drive-strength = <2>;
				bias-pull-up;
			};

			qup_spi11_cs: qup-spi11-cs-state {
				pins = "gpio116";
				function = "qup2_se3";
				drive-strength = <6>;
				bias-disable;
			};

			qup_spi11_data_clk: qup-spi11-data-clk-state {
				pins = "gpio79", "gpio97", "gpio100";
				function = "qup2_se3";
				drive-strength = <6>;
				bias-disable;
			};

			qup_i2c12_data_clk: qup-i2c12-data-clk-state {
				pins = "gpio12", "gpio13";
				function = "qup2_se4";
				drive-strength = <2>;
				bias-pull-up;
			};

			qup_spi12_cs: qup-spi12-cs-state {
				pins = "gpio27";
				function = "qup2_se4";
				drive-strength = <6>;
				bias-disable;
			};

			qup_spi12_data_clk: qup-spi12-data-clk-state {
				pins = "gpio12", "gpio13", "gpio26";
				function = "qup2_se4";
				drive-strength = <6>;
				bias-disable;
			};

			qup_uart13_default: qup-uart13-default-state {
				/* TX, RX */
				pins = "gpio18", "gpio19";
				function = "qup2_se5";
				drive-strength = <2>;
				bias-pull-up;
			};

			qup_i2c14_data_clk: qup-i2c14-data-clk-state {
				pins = "gpio20", "gpio21";
				function = "qup2_se6";
				drive-strength = <2>;
				bias-pull-up;
			};

			qup_spi14_cs: qup-spi14-cs-state {
				pins = "gpio23";
				function = "qup2_se6";
				drive-strength = <6>;
				bias-disable;
			};

			qup_spi14_data_clk: qup-spi14-data-clk-state {
				/* MISO, MOSI, CLK */
				pins = "gpio20", "gpio21", "gpio22";
				function = "qup2_se6";
				drive-strength = <6>;
				bias-disable;
			};

			qup_i2c15_data_clk: qup-i2c15-data-clk-state {
				pins = "gpio27", "gpio26";
				function = "qup2_se7";
				drive-strength = <2>;
				bias-pull-up;
			};

			qup_spi15_cs: qup-spi15-cs-state {
				pins = "gpio12";
				function = "qup2_se7";
				drive-strength = <6>;
				bias-disable;
			};

			qup_spi15_data_clk: qup-spi15-data-clk-state {
				/* MISO, MOSI, CLK */
				pins = "gpio27", "gpio26", "gpio13";
				function = "qup2_se7";
				drive-strength = <6>;
				bias-disable;
			};

			sdc1_default: sdc1-default-state {
				clk-pins {
					pins = "gpio121";
					function = "sdc1";
					drive-strength = <12>;
					bias-disable;
				};

				cmd-pins {
					pins = "gpio123";
					function = "sdc1";
					drive-strength = <12>;
					bias-pull-up;
				};

				data-pins {
					pins = "gpio124", "gpio125",
					       "gpio126", "gpio127",
					       "gpio128", "gpio129",
					       "gpio130", "gpio131";
					function = "sdc1";
					drive-strength = <12>;
					bias-pull-up;
				};

				rclk-pins {
					pins = "gpio120";
					function = "sdc1";
					bias-pull-down;
				};
			};

			sdc1_sleep: sdc1-sleep-state {
				clk-pins {
					pins = "gpio121";
					function = "sdc1";
					drive-strength = <2>;
					bias-disable;
				};

				cmd-pins {
					pins = "gpio123";
					function = "sdc1";
					drive-strength = <2>;
					bias-pull-up;
				};

				data-pins {
					pins = "gpio124", "gpio125",
					       "gpio126", "gpio127",
					       "gpio128", "gpio129",
					       "gpio130", "gpio131";
					function = "sdc1";
					drive-strength = <2>;
					bias-pull-up;
				};

				rclk-pins {
					pins = "gpio120";
					function = "sdc1";
					bias-pull-down;
				};
			};

			sdc2_default: sdc2-default-state {
				clk-pins {
					pins = "gpio62";
					function = "sdc2";
					drive-strength = <16>;
					bias-disable;
				};

				cmd-pins {
					pins = "gpio51";
					function = "sdc2";
					drive-strength = <10>;
					bias-pull-up;
				};

				data-pins {
					pins = "gpio38", "gpio39",
					       "gpio48", "gpio49";
					function = "sdc2";
					drive-strength = <10>;
					bias-pull-up;
				};
			};

			sdc2_sleep: sdc2-sleep-state {
				clk-pins {
					pins = "gpio62";
					function = "sdc2";
					drive-strength = <2>;
					bias-disable;
				};

				cmd-pins {
					pins = "gpio51";
					function = "sdc2";
					drive-strength = <2>;
					bias-pull-up;
				};

				data-pins {
					pins = "gpio38", "gpio39",
					       "gpio48", "gpio49";
					function = "sdc2";
					drive-strength = <2>;
					bias-pull-up;
				};
			};
		};

		sram@14680000 {
			compatible = "qcom,eliza-imem", "mmio-sram";
			reg = <0x0 0x14680000 0x0 0x2c000>;
			ranges = <0x0 0x0 0x14680000 0x2c000>;

			no-memory-wc;

			#address-cells = <1>;
			#size-cells = <1>;

			pil-reloc-sram@94c {
				compatible = "qcom,pil-reloc-info";
				reg = <0x94c 0xc8>;
			};

			ipa_modem_tables: modem-tables-sram@3000 {
				reg = <0x3000 0x2000>;
			};
		};

		apps_smmu: iommu@15000000 {
			compatible = "qcom,eliza-smmu-500", "qcom,smmu-500", "arm,mmu-500";
			reg = <0x0 0x15000000 0x0 0x100000>;

			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 409 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 412 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 707 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 690 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 691 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 692 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 693 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 694 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 695 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 696 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 697 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 410 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 488 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 489 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 490 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 491 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 492 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 493 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 494 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 495 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 496 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 497 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 498 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 499 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 500 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 501 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 502 IRQ_TYPE_LEVEL_HIGH>;

			#iommu-cells = <2>;
			#global-interrupts = <1>;

			dma-coherent;
		};

		intc: interrupt-controller@17100000 {
			compatible = "arm,gic-v3";
			reg = <0x0 0x17100000 0x0 0x10000>,
			      <0x0 0x17180000 0x0 0x200000>;

			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;

			#interrupt-cells = <3>;
			interrupt-controller;

			#redistributor-regions = <1>;
			redistributor-stride = <0x0 0x40000>;

			#address-cells = <2>;
			#size-cells = <2>;
			ranges;

			gic_its: msi-controller@17140000 {
				compatible = "arm,gic-v3-its";
				reg = <0x0 0x17140000 0x0 0x40000>;

				msi-controller;
				#msi-cells = <1>;
			};
		};

		apps_rsc: rsc@17a00000 {
			compatible = "qcom,rpmh-rsc";
			reg = <0x0 0x17a00000 0x0 0x10000>,
			      <0x0 0x17a10000 0x0 0x10000>,
			      <0x0 0x17a20000 0x0 0x10000>;
			reg-names = "drv-0",
				    "drv-1",
				    "drv-2";

			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;

			power-domains = <&cluster_pd>;
			label = "apps_rsc";

			qcom,tcs-offset = <0xd00>;
			qcom,drv-id = <2>;
			qcom,tcs-config = <ACTIVE_TCS 3>,
					  <SLEEP_TCS 2>,
					  <WAKE_TCS 2>,
					  <CONTROL_TCS 0>;

			apps_bcm_voter: bcm-voter {
				compatible = "qcom,bcm-voter";
			};

			rpmhcc: clock-controller {
				compatible = "qcom,eliza-rpmh-clk";
				#clock-cells = <1>;
				clocks = <&xo_board>;
				clock-names = "xo";
			};

			rpmhpd: power-controller {
				compatible = "qcom,eliza-rpmhpd";

				operating-points-v2 = <&rpmhpd_opp_table>;

				#power-domain-cells = <1>;

				rpmhpd_opp_table: opp-table {
					compatible = "operating-points-v2";

					rpmhpd_opp_ret: opp-16 {
						opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>;
					};

					rpmhpd_opp_min_svs: opp-48 {
						opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
					};

					rpmhpd_opp_low_svs_d3: opp-50 {
						opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D3>;
					};

					rpmhpd_opp_low_svs_d2: opp-52 {
						opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D2>;
					};

					rpmhpd_opp_low_svs_d1: opp-56 {
						opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D1>;
					};

					rpmhpd_opp_low_svs_d0: opp-60 {
						opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D0>;
					};

					rpmhpd_opp_low_svs: opp-64 {
						opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
					};

					rpmhpd_opp_low_svs_l1: opp-80 {
						opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_L1>;
					};

					rpmhpd_opp_svs: opp-128 {
						opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
					};

					rpmhpd_opp_svs_l0: opp-144 {
						opp-level = <RPMH_REGULATOR_LEVEL_SVS_L0>;
					};

					rpmhpd_opp_svs_l1: opp-192 {
						opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
					};

					rpmhpd_opp_svs_l2: opp-224 {
						opp-level = <RPMH_REGULATOR_LEVEL_SVS_L2>;
					};

					rpmhpd_opp_nom: opp-256 {
						opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
					};

					rpmhpd_opp_nom_l1: opp-320 {
						opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
					};

					rpmhpd_opp_nom_l2: opp-336 {
						opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>;
					};

					rpmhpd_opp_turbo: opp-384 {
						opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
					};

					rpmhpd_opp_turbo_l1: opp-416 {
						opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
					};

					rpmhpd_opp_turbo_l2: opp-432 {
						opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L2>;
					};

					rpmhpd_opp_turbo_l3: opp-448 {
						opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L3>;
					};

					rpmhpd_opp_turbo_l4: opp-452 {
						opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L4>;
					};

					rpmhpd_opp_super_turbo_no_cpr: opp-480 {
						opp-level = <RPMH_REGULATOR_LEVEL_SUPER_TURBO_NO_CPR>;
					};
				};
			};
		};

		epss_l3: interconnect@17d90000 {
			compatible = "qcom,eliza-epss-l3", "qcom,epss-l3";
			reg = <0x0 0x17d90000 0x0 0x1000>;

			clocks = <&bi_tcxo_div2>, <&gcc GCC_GPLL0>;
			clock-names = "xo", "alternate";

			#interconnect-cells = <1>;
		};

		cpufreq_hw: cpufreq@17d91000 {
			compatible = "qcom,eliza-cpufreq-epss", "qcom,cpufreq-epss";
			reg = <0x0 0x17d91000 0x0 0x1000>,
			      <0x0 0x17d92000 0x0 0x1000>,
			      <0x0 0x17d93000 0x0 0x1000>;
			reg-names = "freq-domain0",
				    "freq-domain1",
				    "freq-domain2";

			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
			interrupt-names = "dcvsh-irq-0",
					  "dcvsh-irq-1",
					  "dcvsh-irq-2";

			clocks = <&bi_tcxo_div2>, <&gcc GCC_GPLL0>;
			clock-names = "xo", "alternate";

			#freq-domain-cells = <1>;
			#clock-cells = <1>;
		};

		pmu@24091000 {
			compatible = "qcom,eliza-llcc-bwmon", "qcom,sc7280-llcc-bwmon";
			reg = <0x0 0x24091000 0x0 0x1000>;

			interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;

			interconnects = <&mc_virt MASTER_LLCC QCOM_ICC_TAG_ACTIVE_ONLY
					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>;

			operating-points-v2 = <&llcc_bwmon_opp_table>;

			llcc_bwmon_opp_table: opp-table {
				compatible = "operating-points-v2";

				opp-0 {
					opp-peak-kBps = <2188800>;
				};

				opp-1 {
					opp-peak-kBps = <5414400>;
				};

				opp-2 {
					opp-peak-kBps = <6220800>;
				};

				opp-3 {
					opp-peak-kBps = <6835200>;
				};

				opp-4 {
					opp-peak-kBps = <8371200>;
				};

				opp-5 {
					opp-peak-kBps = <10944000>;
				};

				opp-6 {
					opp-peak-kBps = <12748800>;
				};

				opp-7 {
					opp-peak-kBps = <14745600>;
				};

				opp-8 {
					opp-peak-kBps = <16896000>;
				};
			};
		};

		pmu@240b7400 {
			compatible = "qcom,eliza-cpu-bwmon", "qcom,sdm845-bwmon";
			reg = <0x0 0x240b7400 0x0 0x600>;

			interrupts = <GIC_SPI 581 IRQ_TYPE_LEVEL_HIGH>;

			interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
					 &gem_noc SLAVE_LLCC QCOM_ICC_TAG_ACTIVE_ONLY>;

			operating-points-v2 = <&cpu_bwmon_opp_table>;

			cpu_bwmon_opp_table: opp-table {
				compatible = "operating-points-v2";

				opp-0 {
					opp-peak-kBps = <307200>;
				};

				opp-1 {
					opp-peak-kBps = <5600000>;
				};

				opp-2 {
					opp-peak-kBps = <8528000>;
				};

				opp-3 {
					opp-peak-kBps = <11120000>;
				};

				opp-4 {
					opp-peak-kBps = <14000000>;
				};

				opp-5 {
					opp-peak-kBps = <14928000>;
				};

				opp-6 {
					opp-peak-kBps = <17056000>;
				};
			};
		};

		gem_noc: interconnect@24100000 {
			compatible = "qcom,eliza-gem-noc";
			reg = <0x0 0x24100000 0x0 0x163080>;
			qcom,bcm-voters = <&apps_bcm_voter>;
			#interconnect-cells = <2>;
		};

		system-cache-controller@24800000 {
			compatible = "qcom,eliza-llcc";
			reg = <0x0 0x24800000 0x0 0x200000>,
			      <0x0 0x24c00000 0x0 0x200000>,
			      <0x0 0x26800000 0x0 0x200000>,
			      <0x0 0x26c00000 0x0 0x200000>;
			reg-names = "llcc0_base",
				    "llcc2_base",
				    "llcc_broadcast_base",
				    "llcc_broadcast_and_base";

			interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>;
		};

		nsp_noc: interconnect@320c0000 {
			compatible = "qcom,eliza-nsp-noc";
			reg = <0x0 0x320c0000 0x0 0xe080>;
			qcom,bcm-voters = <&apps_bcm_voter>;
			#interconnect-cells = <2>;
		};
	};

	thermal-zones {
		aoss0-thermal {
			thermal-sensors = <&tsens0 0>;

			trips {
				aoss-hot {
					temperature = <110000>;
					hysteresis = <1000>;
					type = "hot";
				};

				aoss-critical {
					temperature = <115000>;
					hysteresis = <0>;
					type = "critical";
				};
			};
		};

		aoss1-thermal {
			thermal-sensors = <&tsens1 0>;

			trips {
				aoss-hot {
					temperature = <110000>;
					hysteresis = <1000>;
					type = "hot";
				};

				aoss-critical {
					temperature = <115000>;
					hysteresis = <0>;
					type = "critical";
				};
			};
		};

		aoss2-thermal {
			thermal-sensors = <&tsens2 0>;

			trips {
				aoss-hot {
					temperature = <110000>;
					hysteresis = <1000>;
					type = "hot";
				};

				aoss-critical {
					temperature = <115000>;
					hysteresis = <0>;
					type = "critical";
				};
			};
		};

		camera0-thermal {
			thermal-sensors = <&tsens1 12>;

			trips {
				camera-hot {
					temperature = <110000>;
					hysteresis = <1000>;
					type = "hot";
				};

				camera-critical {
					temperature = <115000>;
					hysteresis = <0>;
					type = "critical";
				};
			};
		};

		camera1-thermal {
			thermal-sensors = <&tsens1 13>;

			trips {
				camera-hot {
					temperature = <110000>;
					hysteresis = <1000>;
					type = "hot";
				};

				camera-critical {
					temperature = <115000>;
					hysteresis = <0>;
					type = "critical";
				};
			};
		};

		cpu0-thermal {
			thermal-sensors = <&tsens1 1>;

			trips {
				cpu-critical {
					temperature = <110000>;
					hysteresis = <1000>;
					type = "critical";
				};
			};
		};

		cpu1-thermal {
			thermal-sensors = <&tsens1 2>;

			trips {
				cpu-critical {
					temperature = <110000>;
					hysteresis = <1000>;
					type = "critical";
				};
			};
		};

		cpu2-thermal {
			thermal-sensors = <&tsens1 3>;

			trips {
				cpu-critical {
					temperature = <110000>;
					hysteresis = <1000>;
					type = "critical";
				};
			};
		};

		cpu3-top-thermal {
			thermal-sensors = <&tsens0 3>;

			trips {
				cpu-critical {
					temperature = <110000>;
					hysteresis = <1000>;
					type = "critical";
				};
			};
		};

		cpu3-bottom-thermal {
			thermal-sensors = <&tsens0 4>;

			trips {
				cpu-critical {
					temperature = <110000>;
					hysteresis = <1000>;
					type = "critical";
				};
			};
		};

		cpu4-top-thermal {
			thermal-sensors = <&tsens0 5>;

			trips {
				cpu-critical {
					temperature = <110000>;
					hysteresis = <1000>;
					type = "critical";
				};
			};
		};

		cpu4-bottom-thermal {
			thermal-sensors = <&tsens0 6>;

			trips {
				cpu-critical {
					temperature = <110000>;
					hysteresis = <1000>;
					type = "critical";
				};
			};
		};

		cpu5-top-thermal {
			thermal-sensors = <&tsens0 7>;

			trips {
				cpu-critical {
					temperature = <110000>;
					hysteresis = <1000>;
					type = "critical";
				};
			};
		};

		cpu5-bottom-thermal {
			thermal-sensors = <&tsens0 8>;

			trips {
				cpu-critical {
					temperature = <110000>;
					hysteresis = <1000>;
					type = "critical";
				};
			};
		};

		cpu6-top-thermal {
			thermal-sensors = <&tsens0 9>;

			trips {
				cpu-critical {
					temperature = <110000>;
					hysteresis = <1000>;
					type = "critical";
				};
			};
		};

		cpu6-bottom-thermal {
			thermal-sensors = <&tsens0 10>;

			trips {
				cpu-critical {
					temperature = <110000>;
					hysteresis = <1000>;
					type = "critical";
				};
			};
		};

		cpu7-top-thermal {
			thermal-sensors = <&tsens0 11>;

			trips {
				cpu-critical {
					temperature = <110000>;
					hysteresis = <1000>;
					type = "critical";
				};
			};
		};

		cpu7-bottom-thermal {
			thermal-sensors = <&tsens0 12>;

			trips {
				cpu-critical {
					temperature = <110000>;
					hysteresis = <1000>;
					type = "critical";
				};
			};
		};

		cpuss0-thermal {
			thermal-sensors = <&tsens0 1>;

			trips {
				cpuss-hot {
					temperature = <110000>;
					hysteresis = <1000>;
					type = "hot";
				};

				cpuss-critical {
					temperature = <115000>;
					hysteresis = <0>;
					type = "critical";
				};
			};
		};

		cpuss1-thermal {
			thermal-sensors = <&tsens0 2>;

			trips {
				cpuss-hot {
					temperature = <110000>;
					hysteresis = <1000>;
					type = "hot";
				};

				cpuss-critical {
					temperature = <115000>;
					hysteresis = <0>;
					type = "critical";
				};
			};
		};

		ddr-thermal {
			thermal-sensors = <&tsens1 11>;

			trips {
				ddr-hot {
					temperature = <110000>;
					hysteresis = <1000>;
					type = "hot";
				};

				ddr-critical {
					temperature = <115000>;
					hysteresis = <0>;
					type = "critical";
				};
			};
		};

		gpuss0-thermal {
			polling-delay-passive = <10>;

			thermal-sensors = <&tsens1 8>;

			trips {
				gpu-alert {
					temperature = <95000>;
					hysteresis = <1000>;
					type = "passive";
				};

				gpu-hot {
					temperature = <110000>;
					hysteresis = <1000>;
					type = "hot";
				};

				gpu-critical {
					temperature = <115000>;
					hysteresis = <0>;
					type = "critical";
				};
			};
		};

		gpuss1-thermal {
			polling-delay-passive = <10>;

			thermal-sensors = <&tsens1 9>;

			trips {
				gpu-alert {
					temperature = <95000>;
					hysteresis = <1000>;
					type = "passive";
				};

				gpu-hot {
					temperature = <110000>;
					hysteresis = <1000>;
					type = "hot";
				};

				gpu-critical {
					temperature = <115000>;
					hysteresis = <0>;
					type = "critical";
				};
			};
		};

		modem0-thermal {
			thermal-sensors = <&tsens2 1>;

			trips {
				modem-hot {
					temperature = <110000>;
					hysteresis = <1000>;
					type = "hot";
				};

				modem-critical {
					temperature = <115000>;
					hysteresis = <0>;
					type = "critical";
				};
			};
		};

		modem1-thermal {
			thermal-sensors = <&tsens2 2>;

			trips {
				modem-hot {
					temperature = <110000>;
					hysteresis = <1000>;
					type = "hot";
				};

				modem-critical {
					temperature = <115000>;
					hysteresis = <0>;
					type = "critical";
				};
			};
		};

		modem2-thermal {
			thermal-sensors = <&tsens2 3>;

			trips {
				modem-hot {
					temperature = <110000>;
					hysteresis = <1000>;
					type = "hot";
				};

				modem-critical {
					temperature = <115000>;
					hysteresis = <0>;
					type = "critical";
				};
			};
		};

		modem3-thermal {
			thermal-sensors = <&tsens2 4>;

			trips {
				modem-hot {
					temperature = <110000>;
					hysteresis = <1000>;
					type = "hot";
				};

				modem-critical {
					temperature = <115000>;
					hysteresis = <0>;
					type = "critical";
				};
			};
		};

		nsphmx0-thermal {
			thermal-sensors = <&tsens1 6>;

			trips {
				nsphmx-hot {
					temperature = <110000>;
					hysteresis = <1000>;
					type = "hot";
				};

				nsphmx-critical {
					temperature = <115000>;
					hysteresis = <0>;
					type = "critical";
				};
			};
		};

		nsphmx1-thermal {
			thermal-sensors = <&tsens1 7>;

			trips {
				nsphmx-hot {
					temperature = <110000>;
					hysteresis = <1000>;
					type = "hot";
				};

				nsphmx-critical {
					temperature = <115000>;
					hysteresis = <0>;
					type = "critical";
				};
			};
		};

		nsphvx0-thermal {
			thermal-sensors = <&tsens1 4>;

			trips {
				nsphvx-hot {
					temperature = <110000>;
					hysteresis = <1000>;
					type = "hot";
				};

				nsphvx-critical {
					temperature = <115000>;
					hysteresis = <0>;
					type = "critical";
				};
			};
		};

		nsphvx1-thermal {
			thermal-sensors = <&tsens1 5>;

			trips {
				nsphvx-hot {
					temperature = <110000>;
					hysteresis = <1000>;
					type = "hot";
				};

				nsphvx-critical {
					temperature = <115000>;
					hysteresis = <0>;
					type = "critical";
				};
			};
		};

		video-thermal {
			thermal-sensors = <&tsens1 10>;

			trips {
				video-hot {
					temperature = <110000>;
					hysteresis = <1000>;
					type = "hot";
				};

				video-critical {
					temperature = <115000>;
					hysteresis = <0>;
					type = "critical";
				};
			};
		};
	};

	timer {
		compatible = "arm,armv8-timer";

		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
	};
};