// SPDX-License-Identifier: GPL-2.0-or-later

/dts-v1/;
#include "aspeed-g6.dtsi"
#include <dt-bindings/gpio/aspeed-gpio.h>
#include <dt-bindings/i2c/i2c.h>

/ {
	model = "Facebook Anacapa BMC";
	compatible = "facebook,anacapa-bmc", "aspeed,ast2600";

	aliases {
		serial0 = &uart1;
		serial1 = &uart2;
		serial2 = &uart3;
		serial3 = &uart4;
		serial4 = &uart5;
		i2c16 = &i2c0mux0ch0;
		i2c17 = &i2c0mux0ch1;
		i2c18 = &i2c0mux0ch2;
		i2c19 = &i2c0mux0ch3;
		i2c20 = &i2c1mux0ch0;
		i2c21 = &i2c1mux0ch1;
		i2c22 = &i2c1mux0ch2;
		i2c23 = &i2c1mux0ch3;
		i2c24 = &i2c4mux0ch0;
		i2c25 = &i2c4mux0ch1;
		i2c26 = &i2c4mux0ch2;
		i2c27 = &i2c4mux0ch3;
		i2c28 = &i2c4mux0ch4;
		i2c29 = &i2c4mux0ch5;
		i2c30 = &i2c4mux0ch6;
		i2c31 = &i2c4mux0ch7;
		i2c32 = &i2c8mux0ch0;
		i2c33 = &i2c8mux0ch1;
		i2c34 = &i2c8mux0ch2;
		i2c35 = &i2c8mux0ch3;
		i2c36 = &i2c10mux0ch0;
		i2c37 = &i2c10mux0ch1;
		i2c38 = &i2c10mux0ch2;
		i2c39 = &i2c10mux0ch3;
		i2c40 = &i2c10mux0ch4;
		i2c41 = &i2c10mux0ch5;
		i2c42 = &i2c10mux0ch6;
		i2c43 = &i2c10mux0ch7;
		i2c44 = &i2c11mux0ch0;
		i2c45 = &i2c11mux0ch1;
		i2c46 = &i2c11mux0ch2;
		i2c47 = &i2c11mux0ch3;
		i2c48 = &i2c11mux0ch4;
		i2c49 = &i2c11mux0ch5;
		i2c50 = &i2c11mux0ch6;
		i2c51 = &i2c11mux0ch7;
		i2c52 = &i2c13mux0ch0;
		i2c53 = &i2c13mux0ch1;
		i2c54 = &i2c13mux0ch2;
		i2c55 = &i2c13mux0ch3;
		i2c56 = &i2c13mux0ch4;
		i2c57 = &i2c13mux0ch5;
		i2c58 = &i2c13mux0ch6;
		i2c59 = &i2c13mux0ch7;
	};

	chosen {
		stdout-path = "serial4:57600n8";
	};

	iio-hwmon {
		compatible = "iio-hwmon";
		io-channels = <&adc0 0>, <&adc0 1>, <&adc0 2>, <&adc0 3>,
				  <&adc0 4>, <&adc0 5>, <&adc0 6>, <&adc0 7>,
				  <&adc1 2>;
	};

	leds {
		compatible = "gpio-leds";

		led-0 {
			label = "bmc_heartbeat_amber";
			gpios = <&gpio0 ASPEED_GPIO(P, 7) GPIO_ACTIVE_LOW>;
			linux,default-trigger = "heartbeat";
		};

		led-1 {
			label = "fp_id_amber";
			default-state = "off";
			gpios = <&gpio0 ASPEED_GPIO(B, 5) GPIO_ACTIVE_HIGH>;
		};
	};

	memory@80000000 {
		device_type = "memory";
		reg = <0x80000000 0x80000000>;
	};

	reserved-memory {
		#address-cells = <1>;
		#size-cells = <1>;
		ranges;

		video_engine_memory: video {
			size = <0x02c00000>;
			alignment = <0x00100000>;
			compatible = "shared-dma-pool";
			reusable;
		};

		gfx_memory: framebuffer {
			size = <0x01000000>;
			alignment = <0x01000000>;
			compatible = "shared-dma-pool";
			reusable;
		};
	};

	p3v3_bmc_aux: regulator-p3v3-bmc-aux {
		compatible = "regulator-fixed";
		regulator-name = "p3v3_bmc_aux";
		regulator-min-microvolt = <3300000>;
		regulator-max-microvolt = <3300000>;
		regulator-always-on;
	};

	spi_gpio: spi {
		compatible = "spi-gpio";
		#address-cells = <1>;
		#size-cells = <0>;

		sck-gpios = <&gpio0 ASPEED_GPIO(Z, 3) GPIO_ACTIVE_HIGH>;
		mosi-gpios = <&gpio0 ASPEED_GPIO(Z, 4) GPIO_ACTIVE_HIGH>;
		miso-gpios = <&gpio0 ASPEED_GPIO(Z, 5) GPIO_ACTIVE_HIGH>;
		cs-gpios = <&gpio0 ASPEED_GPIO(Z, 0) GPIO_ACTIVE_LOW>;
		num-chipselects = <1>;
		status = "okay";

		tpm@0 {
			compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
			spi-max-frequency = <33000000>;
			reg = <0>;
		};
	};
};

&adc0 {
	aspeed,int-vref-microvolt = <2500000>;
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default
		&pinctrl_adc2_default &pinctrl_adc3_default
		&pinctrl_adc4_default &pinctrl_adc5_default
		&pinctrl_adc6_default &pinctrl_adc7_default>;
	status = "okay";
};

&adc1 {
	aspeed,int-vref-microvolt = <2500000>;
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_adc10_default>;
	status = "okay";
};

&ehci1 {
	status = "okay";
};

&fmc {
	status = "okay";

	flash@0 {
		status = "okay";
		m25p,fast-read;
		label = "bmc";
		spi-max-frequency = <50000000>;
#include "openbmc-flash-layout-128.dtsi"
	};

	flash@1 {
		status = "okay";
		m25p,fast-read;
		label = "alt-bmc";
		spi-max-frequency = <50000000>;
	};
};

&gfx {
	status = "okay";
	memory-region = <&gfx_memory>;
};

&gpio0 {
	gpio-line-names =

	/*A0-A7*/
	"","","","","","","","",

	/*B0-B7*/
	"BATTERY_DETECT", "", "", "BMC_READY",
	"", "FM_ID_LED", "", "",

	/*C0-C7*/
	"","","","","","","","",

	/*D0-D7*/
	"","","","","","","","",

	/*E0-E7*/
	"","","","","","","","",

	/*F0-F7*/
	"","","","","","","","",

	/*G0-G7*/
	"FM_MUX1_SEL", "", "", "",
	"", "", "FM_DEBUG_PORT_PRSNT_N", "FM_BMC_DBP_PRESENT_N",

	/*H0-H7*/
	"","","","","","","","",

	/*I0-I7*/
	"", "", "", "",
	"", "FLASH_WP_STATUS", "BMC_JTAG_MUX_SEL", "",

	/*J0-J7*/
	"","","","","","","","",

	/*K0-K7*/
	"","","","","","","","",

	/*L0-L7*/
	"","","","","","","","",

	/*M0-M7*/
	"", "BMC_FRU_WP", "", "",
	"", "", "", "",

	/*N0-N7*/
	"LED_POSTCODE_0", "LED_POSTCODE_1", "LED_POSTCODE_2", "LED_POSTCODE_3",
	"LED_POSTCODE_4", "LED_POSTCODE_5", "LED_POSTCODE_6", "LED_POSTCODE_7",

	/*O0-O7*/
	"","","","","","","","",

	/*P0-P7*/
	"PWR_BTN_BMC_BUF_N", "", "ID_RST_BTN_BMC_N", "",
	"PWR_LED", "", "", "BMC_HEARTBEAT_N",

	/*Q0-Q7*/
	"","","","","","","","",

	/*R0-R7*/
	"","","","","","","","",

	/*S0-S7*/
	"", "", "SYS_BMC_PWRBTN_N", "",
	"", "", "", "RUN_POWER_FAULT",

	/*T0-T7*/
	"","","","","","","","",

	/*U0-U7*/
	"","","","","","","","",

	/*V0-V7*/
	"","","","","","","","",

	/*W0-W7*/
	"","","","","","","","",

	/*X0-X7*/
	"","","","","","","","",

	/*Y0-Y7*/
	"","","","","","","","",

	/*Z0-Z7*/
	"SPI_BMC_TPM_CS2_N", "", "", "SPI_BMC_TPM_CLK",
	"SPI_BMC_TPM_MOSI", "SPI_BMC_TPM_MISO", "", "";
};

&gpio1 {
	gpio-line-names =
	/*18A0-18A7*/
	"","","","","","","","",

	/*18B0-18B7*/
	"","","","",
	"FM_BOARD_BMC_REV_ID0", "FM_BOARD_BMC_REV_ID1",
	"FM_BOARD_BMC_REV_ID2", "",

	/*18C0-18C7*/
	"","","","","","","","",

	/*18D0-18D7*/
	"","","","","","","","",

	/*18E0-18E3*/
	"FM_BMC_PROT_LS_EN", "AC_PWR_BMC_BTN_N", "", "";
};

// L Bridge Board
&i2c0 {
	status = "okay";

	eeprom@50 {
		compatible = "atmel,24c2048";
		reg = <0x50>;
		pagesize = <128>;
	};

	i2c-mux@70 {
		compatible = "nxp,pca9546";
		reg = <0x70>;
		#address-cells = <1>;
		#size-cells = <0>;
		i2c-mux-idle-disconnect;

		i2c0mux0ch0: i2c@0 {
			reg = <0>;
			#address-cells = <1>;
			#size-cells = <0>;
		};
		i2c0mux0ch1: i2c@1 {
			reg = <1>;
			#address-cells = <1>;
			#size-cells = <0>;
		};
		i2c0mux0ch2: i2c@2 {
			reg = <2>;
			#address-cells = <1>;
			#size-cells = <0>;
		};
		i2c0mux0ch3: i2c@3 {
			reg = <3>;
			#address-cells = <1>;
			#size-cells = <0>;
		};
	};
};

// R Bridge Board
&i2c1 {
	status = "okay";

	eeprom@50 {
		compatible = "atmel,24c2048";
		reg = <0x50>;
		pagesize = <128>;
	};

	i2c-mux@70 {
		compatible = "nxp,pca9546";
		reg = <0x70>;
		#address-cells = <1>;
		#size-cells = <0>;
		i2c-mux-idle-disconnect;

		i2c1mux0ch0: i2c@0 {
			reg = <0>;
			#address-cells = <1>;
			#size-cells = <0>;
		};
		i2c1mux0ch1: i2c@1 {
			reg = <1>;
			#address-cells = <1>;
			#size-cells = <0>;
		};
		i2c1mux0ch2: i2c@2 {
			reg = <2>;
			#address-cells = <1>;
			#size-cells = <0>;
		};
		i2c1mux0ch3: i2c@3 {
			reg = <3>;
			#address-cells = <1>;
			#size-cells = <0>;
		};
	};
};

// MB - E1.S
&i2c4 {
	status = "okay";

	i2c-mux@70 {
		compatible = "nxp,pca9548";
		reg = <0x70>;
		#address-cells = <1>;
		#size-cells = <0>;
		i2c-mux-idle-disconnect;

		i2c4mux0ch0: i2c@0 {
			reg = <0>;
			#address-cells = <1>;
			#size-cells = <0>;
		};
		i2c4mux0ch1: i2c@1 {
			reg = <1>;
			#address-cells = <1>;
			#size-cells = <0>;
		};
		i2c4mux0ch2: i2c@2 {
			reg = <2>;
			#address-cells = <1>;
			#size-cells = <0>;
		};
		i2c4mux0ch3: i2c@3 {
			reg = <3>;
			#address-cells = <1>;
			#size-cells = <0>;
		};
		i2c4mux0ch4: i2c@4 {
			reg = <4>;
			#address-cells = <1>;
			#size-cells = <0>;
		};
		i2c4mux0ch5: i2c@5 {
			reg = <5>;
			#address-cells = <1>;
			#size-cells = <0>;
		};
		i2c4mux0ch6: i2c@6 {
			reg = <6>;
			#address-cells = <1>;
			#size-cells = <0>;
		};
		i2c4mux0ch7: i2c@7 {
			reg = <7>;
			#address-cells = <1>;
			#size-cells = <0>;
		};
	};
};

// AMC
&i2c5 {
	status = "okay";
};

// MB
&i2c6 {
	status = "okay";

	// HPM FRU
	eeprom@50 {
		compatible = "atmel,24c256";
		reg = <0x50>;
	};
};

// SCM
&i2c7 {
	status = "okay";


};

// MB - PDB
&i2c8 {
	status = "okay";

	i2c-mux@72 {
		compatible = "nxp,pca9546";
		reg = <0x72>;
		#address-cells = <1>;
		#size-cells = <0>;
		i2c-mux-idle-disconnect;

		i2c8mux0ch0: i2c@0 {
			reg = <0>;
			#address-cells = <1>;
			#size-cells = <0>;

			adc@1f {
				compatible = "ti,adc128d818";
				reg = <0x1f>;
				ti,mode = /bits/ 8 <1>;
			};

			gpio@22 {
				compatible = "nxp,pca9555";
				reg = <0x22>;
				gpio-controller;
				#gpio-cells = <2>;

				interrupt-parent = <&sgpiom0>;
				interrupts = <174 IRQ_TYPE_LEVEL_LOW>;

				gpio-line-names =
					"RPDB_FAN_FULL_SPEED_R_N", "RPDB_I2C_TEMP75_U8_ALERT_R_N",
					"RPDB_I2C_TMP432_U29_ALERT_R_N", "RPDB_GLOBAL_WP",
					"RPDB_FAN_CT_FAN_FAIL_R_N", "",
					"", "",
					"RPDB_ALERT_P50V_HSC2_R_N", "RPDB_ALERT_P50V_HSC3_R_N",
					"RPDB_ALERT_P50V_HSC4_R_N", "RPDB_ALERT_P50V_STBY_R_N",
					"RPDB_I2C_P12V_MB_VRM_ALERT_R_N",
					"RPDB_I2C_P12V_STBY_VRM_ALERT_R_N",
					"RPDB_PGD_P3V3_STBY_PWRGD_R",
					"RPDB_P12V_STBY_VRM_PWRGD_BUF_R";
			};

			gpio@24 {
				compatible = "nxp,pca9555";
				reg = <0x24>;
				gpio-controller;
				#gpio-cells = <2>;

				interrupt-parent = <&sgpiom0>;
				interrupts = <174 IRQ_TYPE_LEVEL_LOW>;

				gpio-line-names =
					"RPDB_EAM2_PRSNT_MOS_N_R", "RPDB_EAM3_PRSNT_MOS_N_R",
					"RPDB_PWRGD_P50V_HSC4_SYS_R",
					"RPDB_PWRGD_P50V_STBY_SYS_BUF_R",
					"RPDB_P50V_FAN1_R2_PG", "RPDB_P50V_FAN2_R2_PG",
					"RPDB_P50V_FAN3_R2_PG", "RPDB_P50V_FAN4_R2_PG",
					"", "RPDB_FAN1_PRSNT_N_R",
					"", "RPDB_FAN2_PRSNT_N_R",
					"RPDB_FAN3_PRSNT_N_R", "RPDB_FAN4_PRSNT_N_R",
					"", "";
			};

			// R-PDB FRU
			eeprom@50 {
				compatible = "atmel,24c128";
				reg = <0x50>;
			};
		};
		i2c8mux0ch1: i2c@1 {
			reg = <1>;
			#address-cells = <1>;
			#size-cells = <0>;

			gpio@22 {
				compatible = "nxp,pca9555";
				reg = <0x22>;
				gpio-controller;
				#gpio-cells = <2>;

				interrupt-parent = <&sgpiom0>;
				interrupts = <174 IRQ_TYPE_LEVEL_LOW>;

				gpio-line-names =
					"LPDB_FAN_FULL_SPEED_R_N","LPDB_I2C_TEMP75_U8_ALERT_R_N",
					"LPDB_I2C_TMP432_U29_ALERT_R_N","LPDB_GLOBAL_WP",
					"LPDB_FAN_CT_FAN_FAIL_R_N","",
					"","",
					"LPDB_ALERT_P50V_HSC0_R_N","LPDB_ALERT_P50V_HSC1_R_N",
					"LPDB_ALERT_P50V_HSC5_R_N","LPDB_I2C_P12V_SW_VRM_ALERT_R_N",
					"LPDB_EAM0_PRSNT_MOS_N_R","LPDB_EAM1_PRSNT_MOS_N_R",
					"LPDB_PWRGD_P50V_HSC5_SYS_R","";
			};

			gpio@24 {
				compatible = "nxp,pca9555";
				reg = <0x24>;
				gpio-controller;
				#gpio-cells = <2>;

				interrupt-parent = <&sgpiom0>;
				interrupts = <174 IRQ_TYPE_LEVEL_LOW>;

				gpio-line-names =
					"LPDB_P50V_FAN1_R2_PG","LPDB_P50V_FAN2_R2_PG",
					"LPDB_P50V_FAN3_R2_PG","LPDB_P50V_FAN4_R2_PG",
					"LPDB_P50V_FAN5_R2_PG","LPDB_FAN1_PRSNT_N_R",
					"LPDB_FAN2_PRSNT_N_R","LPDB_FAN3_PRSNT_N_R",
					"LPDB_FAN4_PRSNT_N_R","LPDB_FAN5_PRSNT_N_R",
					"","",
					"","",
					"","";
			};

			// L-PDB FRU
			eeprom@50 {
				compatible = "atmel,24c128";
				reg = <0x50>;
			};
		};
		i2c8mux0ch2: i2c@2 {
			reg = <2>;
			#address-cells = <1>;
			#size-cells = <0>;
		};
		i2c8mux0ch3: i2c@3 {
			reg = <3>;
			#address-cells = <1>;
			#size-cells = <0>;
		};
	};
};

// SCM
&i2c9 {
	status = "okay";

	// SCM FRU
	eeprom@50 {
		compatible = "atmel,24c128";
		reg = <0x50>;
	};

	// BSM FRU
	eeprom@56 {
		compatible = "atmel,24c64";
		reg = <0x56>;
	};
};

// R Bridge Board
&i2c10 {
	status = "okay";

	i2c-mux@71 {
		compatible = "nxp,pca9548";
		reg = <0x71>;
		#address-cells = <1>;
		#size-cells = <0>;
		i2c-mux-idle-disconnect;

		i2c10mux0ch0: i2c@0 {
			reg = <0>;
			#address-cells = <1>;
			#size-cells = <0>;
		};
		i2c10mux0ch1: i2c@1 {
			reg = <1>;
			#address-cells = <1>;
			#size-cells = <0>;
		};
		i2c10mux0ch2: i2c@2 {
			reg = <2>;
			#address-cells = <1>;
			#size-cells = <0>;
		};
		i2c10mux0ch3: i2c@3 {
			reg = <3>;
			#address-cells = <1>;
			#size-cells = <0>;
		};
		i2c10mux0ch4: i2c@4 {
			reg = <4>;
			#address-cells = <1>;
			#size-cells = <0>;
		};
		i2c10mux0ch5: i2c@5 {
			reg = <5>;
			#address-cells = <1>;
			#size-cells = <0>;

			gpio@22 {
				compatible = "nxp,pca9555";
				reg = <0x22>;
				gpio-controller;
				#gpio-cells = <2>;

				gpio-line-names =
					"","",
					"","RBB_CPLD_REFRESH_IN_PRGRS_R_L",
					"RBB_EAM0_NIC_CBL_PRSNT_R_L","RBB_EAM1_NIC_CBL_PRSNT_R_L",
					"RBB_AINIC_JTAG_MUX_R2_SEL","RBB_SPI_MUX0_R2_SEL",
					"RBB_AINIC_PRSNT_R_L","RBB_AINIC_OE_R_N",
					"RBB_AINIC_BOARD_R2_ID","RBB_RST_USB2_HUB_R_N",
					"RBB_RST_FT4222_R_N","RBB_RST_MCP2210_R_N",
					"","";
			};

			// R Bridge Board FRU
			eeprom@52 {
				compatible = "atmel,24c256";
				reg = <0x52>;
			};
		};
		i2c10mux0ch6: i2c@6 {
			reg = <6>;
			#address-cells = <1>;
			#size-cells = <0>;
		};
		i2c10mux0ch7: i2c@7 {
			reg = <7>;
			#address-cells = <1>;
			#size-cells = <0>;
		};
	};
};

// L Bridge Board
&i2c11 {
	status = "okay";

	i2c-mux@71 {
		compatible = "nxp,pca9548";
		reg = <0x71>;
		#address-cells = <1>;
		#size-cells = <0>;
		i2c-mux-idle-disconnect;

		i2c11mux0ch0: i2c@0 {
			reg = <0>;
			#address-cells = <1>;
			#size-cells = <0>;
		};
		i2c11mux0ch1: i2c@1 {
			reg = <1>;
			#address-cells = <1>;
			#size-cells = <0>;
		};
		i2c11mux0ch2: i2c@2 {
			reg = <2>;
			#address-cells = <1>;
			#size-cells = <0>;
		};
		i2c11mux0ch3: i2c@3 {
			reg = <3>;
			#address-cells = <1>;
			#size-cells = <0>;
		};
		i2c11mux0ch4: i2c@4 {
			reg = <4>;
			#address-cells = <1>;
			#size-cells = <0>;
		};
		i2c11mux0ch5: i2c@5 {
			reg = <5>;
			#address-cells = <1>;
			#size-cells = <0>;

			gpio@22 {
				compatible = "nxp,pca9555";
				reg = <0x22>;
				gpio-controller;
				#gpio-cells = <2>;

				gpio-line-names =
					"","",
					"","LBB_CPLD_REFRESH_IN_PRGRS_R_L",
					"LBB_EAM0_NIC_CBL_PRSNT_R_L","LBB_EAM1_NIC_CBL_PRSNT_R_L",
					"LBB_AINIC_JTAG_MUX_R2_SEL","LBB_SPI_MUX0_R2_SEL",
					"LBB_AINIC_PRSNT_R_L","LBB_AINIC_OE_R_N",
					"LBB_AINIC_BOARD_R2_ID","LBB_RST_USB2_HUB_R_N",
					"LBB_RST_FT4222_R_N","LBB_RST_MCP2210_R_N",
					"","";
			};

			// L Bridge Board FRU
			eeprom@52 {
				compatible = "atmel,24c256";
				reg = <0x52>;
			};
		};
		i2c11mux0ch6: i2c@6 {
			reg = <6>;
			#address-cells = <1>;
			#size-cells = <0>;
		};
		i2c11mux0ch7: i2c@7 {
			reg = <7>;
			#address-cells = <1>;
			#size-cells = <0>;
		};
	};
};

// Debug Card
&i2c12 {
	status = "okay";
};

// MB
&i2c13 {
	status = "okay";

	i2c-mux@70 {
		compatible = "nxp,pca9548";
		reg = <0x70>;
		#address-cells = <1>;
		#size-cells = <0>;
		i2c-mux-idle-disconnect;

		i2c13mux0ch0: i2c@0 {
			reg = <0>;
			#address-cells = <1>;
			#size-cells = <0>;
		};
		i2c13mux0ch1: i2c@1 {
			reg = <1>;
			#address-cells = <1>;
			#size-cells = <0>;
		};
		i2c13mux0ch2: i2c@2 {
			reg = <2>;
			#address-cells = <1>;
			#size-cells = <0>;
		};
		i2c13mux0ch3: i2c@3 {
			reg = <3>;
			#address-cells = <1>;
			#size-cells = <0>;

			adc@1f {
				compatible = "ti,adc128d818";
				reg = <0x1f>;
				ti,mode = /bits/ 8 <1>;
			};
		};
		i2c13mux0ch4: i2c@4 {
			reg = <4>;
			#address-cells = <1>;
			#size-cells = <0>;

			// HPM BRD ID FRU
			eeprom@51 {
				compatible = "atmel,24c256";
				reg = <0x51>;
			};
		};
		i2c13mux0ch5: i2c@5 {
			reg = <5>;
			#address-cells = <1>;
			#size-cells = <0>;
		};
		i2c13mux0ch6: i2c@6 {
			reg = <6>;
			#address-cells = <1>;
			#size-cells = <0>;
		};
		i2c13mux0ch7: i2c@7 {
			reg = <7>;
			#address-cells = <1>;
			#size-cells = <0>;

			nfc@28 {
				compatible = "nxp,nxp-nci-i2c";
				reg = <0x28>;

				interrupt-parent = <&sgpiom0>;
				interrupts = <156 IRQ_TYPE_LEVEL_HIGH>;

				enable-gpios = <&sgpiom0 241 GPIO_ACTIVE_HIGH>;
			};
		};
	};
};

// SCM
&i2c14 {
	status = "okay";
};

&i2c15 {
	status = "okay";
};

&kcs2 {
	aspeed,lpc-io-reg = <0xca8>;
	status = "okay";
};

&kcs3 {
	aspeed,lpc-io-reg = <0xca2>;
	status = "okay";
};

&lpc_ctrl {
	status = "okay";
};

&mac2 {
	status = "okay";
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_ncsi3_default>;
	use-ncsi;
};

&sgpiom0 {
	ngpios = <128>;
	bus-frequency = <2000000>;
	gpio-line-names =
	/*in - out - in - out */
	/* A0-A7 line 0-15 */
	"", "FM_CPU0_SYS_RESET_N", "", "CPU0_KBRST_N",
	"", "FM_CPU0_PROCHOT_trigger_N", "", "FM_CLR_CMOS_R_P0",
	"", "Force_I3C_SEL", "", "SYSTEM_Force_Run_AC_Cycle",
	"", "", "", "",

	/* B0-B7 line 16-31 */
	"Channel0_leakage_EAM3", "FM_CPU_FPGA_JTAG_MUX_SEL",
	"Channel1_leakage_EAM0", "FM_SCM_JTAG_MUX_SEL",
	"Channel2_leakage_Manifold1", "FM_BRIDGE_JTAG_MUX_SEL",
	"Channel3_leakage", "FM_CPU0_NMI_SYNC_FLOOD_N",
	"Channel4_leakage_Manifold2", "",
	"Channel5_leakage_EAM1", "",
	"Channel6_leakage_CPU_DIMM", "",
	"Channel7_leakage_EAM2", "",

	/* C0-C7 line 32-47 */
	"RSVD_RMC_GPIO3", "", "", "",
	"", "", "", "",
	"LEAK_DETECT_RMC_N", "JTAG_CPLD_TRST_R_N", "", "",
	"", "", "", "",

	/* D0-D7 line 48-63 */
	"PWRGD_PDB_EAMHSC0_CPLD_PG_R", "",
	"PWRGD_PDB_EAMHSC1_CPLD_PG_R", "",
	"PWRGD_PDB_EAMHSC2_CPLD_PG_R", "",
	"PWRGD_PDB_EAMHSC3_CPLD_PG_R", "",
	"AMC_BRD_PRSNT_CPLD_L", "", "", "",
	"", "", "", "",

	/* E0-E7 line 64-79 */
	"AMC_PDB_EAMHSC0_CPLD_EN_R", "",
	"AMC_PDB_EAMHSC1_CPLD_EN_R", "",
	"AMC_PDB_EAMHSC2_CPLD_EN_R", "",
	"AMC_PDB_EAMHSC3_CPLD_EN_R", "",
	"", "", "", "",
	"", "", "", "",

	/* F0-F7 line 80-95 */
	"PWRGD_PVDDCR_CPU1_P0", "SGPIO_READY",
	"PWRGD_PVDDCR_CPU0_P0", "",
	"", "", "", "",
	"", "", "", "",

	/* G0-G7 line 96-111 */
	"L_PRSNT_EDSFF0_N", "",
	"L_PRSNT_EDSFF1_N", "",
	"R_PRSNT_EDSFF2_N", "",
	"R_PRSNT_EDSFF3_N", "",
	"HPM_EDSFF_PG", "",
	"PWRGD_CHEH_CPU0_FPGA", "",
	"PWRGD_CHAD_CPU0_FPGA", "FM_BMC_READY_PLD",
	"", "",

	/* H0-H7 line 112-127 */
	"PWRGD_P3V3", "",
	"P12V_DDR_IP_PWRGD_R", "",
	"P12V_DDR_AH_PWRGD_R", "",
	"PWRGD_P12V_VRM1_CPLD_PG_R", "",
	"PWRGD_P12V_VRM0_CPLD_PG_R", "",
	"PWRGD_PDB_HSC4_CPLD_PG_R", "",
	"PWRGD_PVDD18_S5_P0_PG", "",
	"PWRGD_PVDD33_S5_P0_PG", "",

	/* I0-I7 line 128-143 */
	"EAM0_BRD_PRSNT_R_L", "",
	"EAM1_BRD_PRSNT_R_L", "",
	"EAM2_BRD_PRSNT_R_L", "",
	"EAM3_BRD_PRSNT_R_L", "",
	"EAM0_CPU_MOD_PWR_GD_R", "",
	"EAM1_CPU_MOD_PWR_GD_R", "",
	"PRSNT_EDSFF_BOOT_N", "",
	"EAM3_CPU_MOD_PWR_GD_R", "",

	/* J0-J7 line 144-159 */
	"PRSNT_L_BIRDGE_R", "",
	"PRSNT_R_BIRDGE_R", "",
	"BRIDGE_L_MAIN_PG_R", "",
	"BRIDGE_R_MAIN_PG_R", "",
	"BRIDGE_L_STBY_PG_R", "",
	"BRIDGE_R_STBY_PG_R", "",
	"", "", "", "",

	/* K0-K7 line 160-175 */
	"ADC_I2C_ALERT_N", "",
	"TEMP_I2C_ALERT_R_L", "",
	"CPU0_VR_SMB_ALERT_CPLD_N", "",
	"COVER_INTRUDER_R_N", "",
	"HANDLE_INTRUDER_CPLD_N", "",
	"IRQ_MCIO_CPLD_WAKE_R_N", "",
	"APML_CPU0_ALERT_R_N", "",
	"PDB_ALERT_R_N", "",

	/* L0-L7 line 176-191 */
	"L_EDSFF0_PG", "", "L_EDSFF1_PG", "",
	"R_EDSFF2_PG", "", "R_EDSFF3_PG", "",
	"CPU0_CORETYPE0", "", "CPU0_CORETYPE1", "",
	"CPU0_CORETYPE2", "", "FM_BIOS_POST_CMPLT_R_N", "",

	/* M0-M7 line 192-207 */
	"EAM0_SMERR_CPLD_R_L", "",
	"EAM1_SMERR_CPLD_R_L", "",
	"EAM2_SMERR_CPLD_R_L", "",
	"EAM3_SMERR_CPLD_R_L", "",
	"CPU0_SMERR_N_R", "",
	"CPU0_NV_SAVE_N_R", "",
	"PDB_PWR_LOSS_CPLD_N", "",
	"IRQ_BMC_SMI_ACTIVE_R_N", "",

	/* N0-N7 line 208-223 */
	"AMCROT_BMC_S5_RDY_R", "",
	"AMC_RDY_R", "",
	"AMC_STBY_PGOOD_R", "",
	"CPU_AMC_SLP_S5_R_L", "",
	"AMC_CPU_EAMPG_R", "",
	"", "", "", "",

	/* O0-O7 line 224-239 */
	"HPM_PWR_FAIL", "Port80_b0",
	"FM_DIMM_IP_FAIL", "Port80_b1",
	"FM_DIMM_AH_FAIL", "Port80_b2",
	"AMC_THERMTRIP_ASSERT", "Port80_b3",
	"CPU_THERMTRIP_ASSERT", "Port80_b4",
	"PVDDCR_SOC_P0_OCP_L", "Port80_b5",
	"CPLD_SGPIO_RDY", "Port80_b6",
	"", "Port80_b7",

	/* P0-P7 line 240-255 */
	"CPU0_SLP_S5_N_R", "NFC_VEN",
	"CPU0_SLP_S3_N_R", "",
	"FM_CPU0_PWRGD", "",
	"PWRGD_RMC", "",
	"FM_RST_CPU0_RESET_N", "",
	"FM_PWRGD_CPU0_PWROK", "",
	"wS5_PWR_Ready", "",
	"wS0_ON_N", "PWRGD_P1V0_AUX";
	status = "okay";
};

// BIOS Flash
&spi2 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_spi2_default>;
	status = "okay";
	reg = <0x1e631000 0xc4>, <0x50000000 0x8000000>;

	flash@0 {
		compatible = "jedec,spi-nor";
		label = "pnor";
		spi-max-frequency = <12000000>;
		spi-tx-bus-width = <2>;
		spi-rx-bus-width = <2>;
		status = "okay";
	};
};

// HOST BIOS Debug
&uart1 {
	status = "okay";
};

&uart3 {
	status = "okay";
};

&uart4 {
	status = "okay";
};

// BMC Debug Console
&uart5 {
	status = "okay";
};

&uart_routing {
	status = "okay";
};

&uhci {
	status = "okay";
};

&vhub {
	status = "okay";
	pinctrl-names = "default";
};

&video {
	status = "okay";
	memory-region = <&video_engine_memory>;
};

&wdt1 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_wdtrst1_default>;
	aspeed,reset-type = "soc";
	aspeed,external-signal;
	aspeed,ext-push-pull;
	aspeed,ext-active-high;
	aspeed,ext-pulse-duration = <256>;
	status = "okay";
};