From f146c7bc85a51f95c05e0f8173d484eb301ece78 Mon Sep 17 00:00:00 2001 From: Danilo Krummrich Date: Thu, 13 Aug 2026 18:52:04 +0200 Subject: PCI: Add pci_irq_type() to query the allocated interrupt type Add a helper that returns PCI_IRQ_MSIX, PCI_IRQ_MSI, or PCI_IRQ_INTX based on the interrupt type the PCI core selected after pci_alloc_irq_vectors(). Several drivers already open-code this check against pdev->msix_enabled and pdev->msi_enabled, or even open code this helper [1]. A common helper avoids the duplication and keeps drivers from accessing the bitfield directly (see also [2]). Acked-by: Bjorn Helgaas Tested-by: John Hubbard Link: https://elixir.bootlin.com/linux/v7.1/source/drivers/net/ethernet/aquantia/atlantic/aq_pci_func.c#L196 [1] Inspired-by: John Hubbard Link: https://lore.kernel.org/all/DKKG2QM3YJYB.Z2H2B2UXJ75N@kernel.org/ [2] Reviewed-by: Gary Guo Link: https://patch.msgid.link/20260813165234.620555-5-dakr@kernel.org [ Add missing pci_irq_type() stub for CONFIG_PCI=n. ] Signed-off-by: Danilo Krummrich --- tools/testing/vsock/README | 86 ++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 86 insertions(+) create mode 100644 tools/testing/vsock/README (limited to 'tools/testing/vsock/README') diff --git a/tools/testing/vsock/README b/tools/testing/vsock/README new file mode 100644 index 000000000..680ce666c --- /dev/null +++ b/tools/testing/vsock/README @@ -0,0 +1,86 @@ +AF_VSOCK test suite +------------------- +These tests exercise net/vmw_vsock/ host<->guest sockets for VMware, KVM, and +Hyper-V. + +The following tests are available: + + * vsock_test - core AF_VSOCK socket functionality + * vsock_diag_test - vsock_diag.ko module for listing open sockets + +The following prerequisite steps are not automated and must be performed prior +to running tests: + +1. Build the kernel, make headers_install, and build these tests. +2. Install the kernel and tests on the host. +3. Install the kernel and tests inside the guest. +4. Boot the guest and ensure that the AF_VSOCK transport is enabled. + +Invoke test binaries in both directions as follows: + + # host=server, guest=client + (host)# $TEST_BINARY --mode=server \ + --control-port=1234 \ + --peer-cid=3 + (guest)# $TEST_BINARY --mode=client \ + --control-host=$HOST_IP \ + --control-port=1234 \ + --peer-cid=2 + + # host=client, guest=server + (guest)# $TEST_BINARY --mode=server \ + --control-port=1234 \ + --peer-cid=2 + (host)# $TEST_BINARY --mode=client \ + --control-port=$GUEST_IP \ + --control-port=1234 \ + --peer-cid=3 + +Some tests are designed to produce kernel memory leaks. Leaks detection, +however, is deferred to Kernel Memory Leak Detector. It is recommended to enable +kmemleak (CONFIG_DEBUG_KMEMLEAK=y) and explicitly trigger a scan after each test +suite run, e.g. + + # echo clear > /sys/kernel/debug/kmemleak + # $TEST_BINARY ... + # echo "wait for any grace periods" && sleep 2 + # echo scan > /sys/kernel/debug/kmemleak + # echo "wait for kmemleak" && sleep 5 + # echo scan > /sys/kernel/debug/kmemleak + # cat /sys/kernel/debug/kmemleak + +For more information see Documentation/dev-tools/kmemleak.rst. + +vsock_perf utility +------------------- +'vsock_perf' is a simple tool to measure vsock performance. It works in +sender/receiver modes: sender connect to peer at the specified port and +starts data transmission to the receiver. After data processing is done, +it prints several metrics(see below). + +Usage: +# run as sender +# connect to CID 2, port 1234, send 1G of data, tx buf size is 1M +./vsock_perf --sender 2 --port 1234 --bytes 1G --buf-size 1M + +Output: +tx performance: A Gbits/s + +Output explanation: +A is calculated as "number of bits to send" / "time in tx loop" + +# run as receiver +# listen port 1234, rx buf size is 1M, socket buf size is 1G, SO_RCVLOWAT is 64K +./vsock_perf --port 1234 --buf-size 1M --vsk-size 1G --rcvlowat 64K + +Output: +rx performance: A Gbits/s +total in 'read()': B sec +POLLIN wakeups: C +average in 'read()': D ns + +Output explanation: +A is calculated as "number of received bits" / "time in rx loop". +B is time, spent in 'read()' system call(excluding 'poll()') +C is number of 'poll()' wake ups with POLLIN bit set. +D is B / C, e.g. average amount of time, spent in single 'read()'. -- cgit v1.3.1