From cf9610f9116d55c5a66ef9f1faecacabd93a9322 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Mon, 24 Aug 2026 08:46:03 -0700 Subject: Merge tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control updates from Linus Walleij: "Core changes: - Use the non-blocking mux_state_try_select() in the generic MUX pin control back-end - Free pin maps on pinctrl_generic_to_map() failure in the core helpers New hardware pin control: - Qualcomm Maili TLMM SoC, PMG1110 PMIC, and Eliza LPASS LPI TLMM SoC (this is for the low power audio, LPASS = Low Power Audio SubSystem portions) - Upboard support on top of the Intel pin controller - Apple T6030 and T6031 support (just compatible strings) - Samsung Exynos 8855 SoC - Mediatek MT6858 SoC - Rockchip RK3308B and RV1106 SoCs - Airoha EN7523 and AN7563 SoCs Improvements: - Qualcomm TLMM GPIOs are unconditionally marked as wakeup capable - Qualcomm improvements on top of the Qualcomm PDC (power domain controller) irqchip improvements from tglx:s tree - Qualcomm IPQ806x and IPQ9650 non-urgent pin grop fixups - The NPCM8xx driver has been put into shape fixing many pin and group definitions - Some non-urgent Tegra 264 pin assignments are fixed up - Some non-urgent fixups to Airoha AN7581 and AN7583 registers and pin assignments, missing features etc" * tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (130 commits) dt-bindings: pinctrl: Convert TI DA850 pupd to DT schema pinctrl: meson: sync some modify from A4 pinctrl: meson: a4: Add input enable pin configuration pinctrl: realtek: rtd1625: remove unused group name spdif_sel pinctrl: realtek: rtd1625: fix base_bit for VE4 GPIO 13 dt-bindings: pinctrl: microchip,pic32mzda-pinctrl: Convert to DT schema Revert "Merge branch 'ib-rsk7204' into devel" pinctrl: rockchip: Add RV1106 pinctrl support dt-bindings: pinctrl: rockchip: Add RV1106 compatible pinctrl: rockchip: Decode drive strength in the get function pinctrl: fix PINCTRL_GENERIC_MUX not always being selectable pinctrl: airoha: add support of an7563 SoC dt-bindings: pinctrl: airoha: add support of an7563 pin controller pinctrl: airoha: try to find chip scu node by phandle first pinctrl: airoha: add support of en7523 SoC dt-bindings: pinctrl: airoha: add support of en7523 pin controller pinctrl: airoha: an7583: add support for olt pinmux pinctrl: airoha: an7583: add support for pon_alt pinmux pinctrl: airoha: an7583: add support for npu_uart pinmux dt-bindings: pinctrl: airoha: an7583: add missed features ... --- tools/testing/vsock/README | 86 ++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 86 insertions(+) create mode 100644 tools/testing/vsock/README (limited to 'tools/testing/vsock/README') diff --git a/tools/testing/vsock/README b/tools/testing/vsock/README new file mode 100644 index 000000000..680ce666c --- /dev/null +++ b/tools/testing/vsock/README @@ -0,0 +1,86 @@ +AF_VSOCK test suite +------------------- +These tests exercise net/vmw_vsock/ host<->guest sockets for VMware, KVM, and +Hyper-V. + +The following tests are available: + + * vsock_test - core AF_VSOCK socket functionality + * vsock_diag_test - vsock_diag.ko module for listing open sockets + +The following prerequisite steps are not automated and must be performed prior +to running tests: + +1. Build the kernel, make headers_install, and build these tests. +2. Install the kernel and tests on the host. +3. Install the kernel and tests inside the guest. +4. Boot the guest and ensure that the AF_VSOCK transport is enabled. + +Invoke test binaries in both directions as follows: + + # host=server, guest=client + (host)# $TEST_BINARY --mode=server \ + --control-port=1234 \ + --peer-cid=3 + (guest)# $TEST_BINARY --mode=client \ + --control-host=$HOST_IP \ + --control-port=1234 \ + --peer-cid=2 + + # host=client, guest=server + (guest)# $TEST_BINARY --mode=server \ + --control-port=1234 \ + --peer-cid=2 + (host)# $TEST_BINARY --mode=client \ + --control-port=$GUEST_IP \ + --control-port=1234 \ + --peer-cid=3 + +Some tests are designed to produce kernel memory leaks. Leaks detection, +however, is deferred to Kernel Memory Leak Detector. It is recommended to enable +kmemleak (CONFIG_DEBUG_KMEMLEAK=y) and explicitly trigger a scan after each test +suite run, e.g. + + # echo clear > /sys/kernel/debug/kmemleak + # $TEST_BINARY ... + # echo "wait for any grace periods" && sleep 2 + # echo scan > /sys/kernel/debug/kmemleak + # echo "wait for kmemleak" && sleep 5 + # echo scan > /sys/kernel/debug/kmemleak + # cat /sys/kernel/debug/kmemleak + +For more information see Documentation/dev-tools/kmemleak.rst. + +vsock_perf utility +------------------- +'vsock_perf' is a simple tool to measure vsock performance. It works in +sender/receiver modes: sender connect to peer at the specified port and +starts data transmission to the receiver. After data processing is done, +it prints several metrics(see below). + +Usage: +# run as sender +# connect to CID 2, port 1234, send 1G of data, tx buf size is 1M +./vsock_perf --sender 2 --port 1234 --bytes 1G --buf-size 1M + +Output: +tx performance: A Gbits/s + +Output explanation: +A is calculated as "number of bits to send" / "time in tx loop" + +# run as receiver +# listen port 1234, rx buf size is 1M, socket buf size is 1G, SO_RCVLOWAT is 64K +./vsock_perf --port 1234 --buf-size 1M --vsk-size 1G --rcvlowat 64K + +Output: +rx performance: A Gbits/s +total in 'read()': B sec +POLLIN wakeups: C +average in 'read()': D ns + +Output explanation: +A is calculated as "number of received bits" / "time in rx loop". +B is time, spent in 'read()' system call(excluding 'poll()') +C is number of 'poll()' wake ups with POLLIN bit set. +D is B / C, e.g. average amount of time, spent in single 'read()'. -- cgit v1.3.1