From 22098763a10d9c1340827fcf6edab66f153b27f0 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sun, 13 Sep 2026 12:27:00 -0700 Subject: Merge tag 'trace-v7.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace Pull tracing fixes from Steven Rostedt: - Don't destroy user event fields when removal fails User event fields are destroyed before the event is removed from visibility. But that can fail leaving the still visible event with no fields. Move the destroying of the fields to after the event is successfully removed from visibility. - Initialize function graph state is fork before calling copy_exec_state() For non-CLONE_VM forks, copy_exec_state() allocates a new task_exec_state. If that allocation fails, ftrace_graph_exit_task() will free the tasks ret_stack pointer. Since that pointer is still using the parent's ret_stack, it mistakenly frees the parent's pointer too. Call ftrace_graph_init() on the task first which will NULL out the new tasks's ret_stack and if the copy fails, it will not free anything. - Remove FGRAPH_MAX_INDEX The macro FGRAPH_MAX_INDEX was added but never used. Remove it. - Save ent_size in function graph printing of nested functions The function graph tracer needs to look at the next event to see if the next event is the return of the current function entry. If it is, it prints a single line: ktime_get(); Otherwise it prints it like a nested function: tick_nohz_irq_exit() { ktime_get(); kcpustat_irq_exit(); } In order to look at the next event, it must save the current event so that it has the information to print from it. It saves the event in the iterator descriptor called "ent". What it doesn't save is the ent_size of the event which is now used to know if the function graph arguments are to be printed. The peek doesn't save the size so the size used happens to be that of the size of the last event that was seen. Save the entry event size in the iterator descriptor so that the correct size is used. - Fix several errors with freeing data in the histogram code The histogram code had a lot of leaked or or incorrect accounting when failures happen. Correct them. - Fix histogram regression of .percent and .graph modifiers Up until 6.3 histogram values could have "percent" or "graph" modifiers that changed how they were printed. But a change that added restricting histograms values from being strings, stack traces and other modifiers inadvertently prevented them from using the percent and graph modifiers, which were legal use cases for values. Put back the percent and graph modifiers. - Fix various typos in the comments - Set the trace_clock before initializing a histogram with clock argument The histogram API allows the user to specific which trace clock to use via a "clock=" string. The histogram is set up first before the clock is checked. If the passed in clock is not valid, it exits without fully fixing up the histogram leaving it on the list and a use-after-free can trigger. Update the clock argument first and if it fails then exit gracefully before the histogram trigger is placed on any lists. - Restore :mod: trailer after parsing in ftrace_set_clr_event The function ftrace_set_clr_event() modifies the parse string and needs to put it back to what was passed in. It searches for ":mod:" via a strsep() but fails to put back the first ':' in the string. Add back the ':' in the passed in string. - Take trace_array reference when opening a tracer options file The options files are dynamically created and some tracers add their own options. When a tracer adds their own list of options, the trace_array holding them has an array to hold the list of options for each tracer. This array increases in size via a krealloc(), and the new entry gets a newly allocated array to hold the options of the new tracer being added. The element in each entry of the tracer's option array holds a pointer back to the trace_array, a pointer to the tracer it is associated to, a pointer to the flags of the option. The issue is that these arrays are freed when the trace_array is freed when its instance it represents is removed from the instances directory. There's a race that an open of one of these options files can happen when the instance is being removed. Add a new helper function to be called by the open function of the options file to iterate all existing trace_arrays under a lock and find the one that has the given option element in one of it's tracer arrays. If found, then update the associated trace_array's reference counter to keep it from being freed. If not found, have the open call return -ENODEV. - Disable interrupts when acquiring the lock in rb_wake_up_waiters() The function rb_wake_up_waiters() assumes it will be called in interrupt context and does not disable irqs when taking cpu_buffer->reader_lock, which can be called in hard interrupt context. The issue is in PREEMPT_RT, this function is called in thread context leaving this lock open to a deadlock. Take the lock with interrupts disabled. - Use rcu_assign_pointer() for tmp_ops filter hash The tmp_ops used in update_ftrace_direct_mod() assigns its filter_hash field directly, but that field is annotated as __rcu and sparse complains. Assign it with rcu_assign_pointer() - Fix use-after-free in enable_trigger_private_data_free() The trace_event_call is accessed through the event_trigger_data's trace_event_file pointer to put the trace_event_call on freeing. The issue is that the trace_event_file data may have been freed already causing a use-after-free. Add a field to the event_trigger_data that points directly to the trace_event_call so that it can decrement its reference directly without needing to go through the trace_event_file. - Fix accounting of buffer data remote headers trace_buffer_desc_size() and trace_remote_alloc_buffer() undercount the number of pages is needed for the asked for size as it doesn't take into account the meta data on each page. Add a helper function to do the calculation properly and use that in these functions. - Catch nr_page_va overflow in ring_buffer_desc sizing The number of pages per remote ring buffer is capped by ring_buffer_desc::nr_page_va (32 bits). A buffer_size large enough to overflow that field would silently allocate a descriptor smaller than what was asked for. - Do not resize the subbuf order if any per_cpu buffer is disabled The mmapping of ring buffers disables resizing the subbuffers, but it is done per-cpu whereas the subbuf size change is done for all the per_cpu buffers under the buffer->mutex. It could change the size of some while the mapping is happening on others. Have the resize of the subbuf order check all the per_cpu buffers under the lock to see if any of them is disabled before starting and causing an inconsistency between buffers that are being mapped. * tag 'trace-v7.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: (25 commits) ring-buffer: Check resize_disabled before publishing the new subbuf order tracing/remotes: Catch nr_page_va overflow in ring_buffer_desc sizing tracing/remotes: Account for ring buffer page header in size calculation tracing: Don't dereference trace_event_file in deferred trigger free ftrace: Use rcu_assign_pointer() for tmp_ops filter hash ring-buffer: Acquire the lock with irqsave in rb_wake_up_waiters() tracing: Take trace_array reference when opening a tracer options file tracing: Fix ring_buffer_read_page_size() kernel-doc tracing: Restore :mod: trailer after parsing in ftrace_set_clr_event() tracing: Fix memory corruption from a "STACKTRACE" histogram key tracing: Fix memory corruption from the histogram stacktrace modifier tracing: Undo the registration when enabling the histogram trigger fails tracing: Take the reference before publishing the named histogram trigger tracing: Set the trace clock before registering the histogram trigger tracing: Fix typo "preceeded" in comment tracing: Fix typo "availabe" in comment tracing: Let histogram values keep the percent and graph modifiers tracing: Keep the entry count when the histogram stats allocation fails tracing: Free histogram the field rejected for a bad modifier tracing: Free histogram the var ref when its initialization fails ... --- tools/testing/selftests/firmware/.gitignore | 2 + tools/testing/selftests/firmware/Makefile | 10 + tools/testing/selftests/firmware/config | 6 + tools/testing/selftests/firmware/fw_fallback.sh | 283 +++++++++++ tools/testing/selftests/firmware/fw_filesystem.sh | 546 ++++++++++++++++++++++ tools/testing/selftests/firmware/fw_lib.sh | 236 ++++++++++ tools/testing/selftests/firmware/fw_namespace.c | 148 ++++++ tools/testing/selftests/firmware/fw_run_tests.sh | 79 ++++ tools/testing/selftests/firmware/fw_upload.sh | 214 +++++++++ tools/testing/selftests/firmware/settings | 8 + 10 files changed, 1532 insertions(+) create mode 100644 tools/testing/selftests/firmware/.gitignore create mode 100644 tools/testing/selftests/firmware/Makefile create mode 100644 tools/testing/selftests/firmware/config create mode 100755 tools/testing/selftests/firmware/fw_fallback.sh create mode 100755 tools/testing/selftests/firmware/fw_filesystem.sh create mode 100755 tools/testing/selftests/firmware/fw_lib.sh create mode 100644 tools/testing/selftests/firmware/fw_namespace.c create mode 100755 tools/testing/selftests/firmware/fw_run_tests.sh create mode 100755 tools/testing/selftests/firmware/fw_upload.sh create mode 100644 tools/testing/selftests/firmware/settings (limited to 'tools/testing/selftests/firmware') diff --git a/tools/testing/selftests/firmware/.gitignore b/tools/testing/selftests/firmware/.gitignore new file mode 100644 index 000000000..62abc92a9 --- /dev/null +++ b/tools/testing/selftests/firmware/.gitignore @@ -0,0 +1,2 @@ +# SPDX-License-Identifier: GPL-2.0-only +fw_namespace diff --git a/tools/testing/selftests/firmware/Makefile b/tools/testing/selftests/firmware/Makefile new file mode 100644 index 000000000..7992969de --- /dev/null +++ b/tools/testing/selftests/firmware/Makefile @@ -0,0 +1,10 @@ +# SPDX-License-Identifier: GPL-2.0-only +# Makefile for firmware loading selftests +CFLAGS = -Wall \ + -O2 + +TEST_PROGS := fw_run_tests.sh +TEST_FILES := fw_fallback.sh fw_filesystem.sh fw_upload.sh fw_lib.sh +TEST_GEN_FILES := fw_namespace + +include ../lib.mk diff --git a/tools/testing/selftests/firmware/config b/tools/testing/selftests/firmware/config new file mode 100644 index 000000000..6e402519b --- /dev/null +++ b/tools/testing/selftests/firmware/config @@ -0,0 +1,6 @@ +CONFIG_TEST_FIRMWARE=y +CONFIG_FW_LOADER=y +CONFIG_FW_LOADER_USER_HELPER=y +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_FW_UPLOAD=y diff --git a/tools/testing/selftests/firmware/fw_fallback.sh b/tools/testing/selftests/firmware/fw_fallback.sh new file mode 100755 index 000000000..70d18be46 --- /dev/null +++ b/tools/testing/selftests/firmware/fw_fallback.sh @@ -0,0 +1,283 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 +# This validates that the kernel will fall back to using the fallback mechanism +# to load firmware it can't find on disk itself. We must request a firmware +# that the kernel won't find, and any installed helper (e.g. udev) also +# won't find so that we can do the load ourself manually. +set -e + +TEST_REQS_FW_SYSFS_FALLBACK="yes" +TEST_REQS_FW_SET_CUSTOM_PATH="no" +TEST_DIR=$(dirname $0) +source $TEST_DIR/fw_lib.sh + +check_mods +check_setup +verify_reqs +setup_tmp_file + +trap "test_finish" EXIT + +load_fw() +{ + local name="$1" + local file="$2" + + # This will block until our load (below) has finished. + echo -n "$name" >"$DIR"/trigger_request & + + # Give kernel a chance to react. + local timeout=10 + while [ ! -e "$DIR"/"$name"/loading ]; do + sleep 0.1 + timeout=$(( $timeout - 1 )) + if [ "$timeout" -eq 0 ]; then + echo "$0: firmware interface never appeared" >&2 + exit 1 + fi + done + + echo 1 >"$DIR"/"$name"/loading + cat "$file" >"$DIR"/"$name"/data + echo 0 >"$DIR"/"$name"/loading + + # Wait for request to finish. + wait +} + +load_fw_cancel() +{ + local name="$1" + local file="$2" + + # This will block until our load (below) has finished. + echo -n "$name" >"$DIR"/trigger_request 2>/dev/null & + + # Give kernel a chance to react. + local timeout=10 + while [ ! -e "$DIR"/"$name"/loading ]; do + sleep 0.1 + timeout=$(( $timeout - 1 )) + if [ "$timeout" -eq 0 ]; then + echo "$0: firmware interface never appeared" >&2 + exit 1 + fi + done + + echo -1 >"$DIR"/"$name"/loading + + # Wait for request to finish. + wait +} + +load_fw_custom() +{ + if [ ! -e "$DIR"/trigger_custom_fallback ]; then + echo "$0: custom fallback trigger not present, ignoring test" >&2 + exit $ksft_skip + fi + + local name="$1" + local file="$2" + + echo -n "$name" >"$DIR"/trigger_custom_fallback 2>/dev/null & + + # Give kernel a chance to react. + local timeout=10 + while [ ! -e "$DIR"/"$name"/loading ]; do + sleep 0.1 + timeout=$(( $timeout - 1 )) + if [ "$timeout" -eq 0 ]; then + echo "$0: firmware interface never appeared" >&2 + exit 1 + fi + done + + echo 1 >"$DIR"/"$name"/loading + cat "$file" >"$DIR"/"$name"/data + echo 0 >"$DIR"/"$name"/loading + + # Wait for request to finish. + wait + return 0 +} + + +load_fw_custom_cancel() +{ + if [ ! -e "$DIR"/trigger_custom_fallback ]; then + echo "$0: canceling custom fallback trigger not present, ignoring test" >&2 + exit $ksft_skip + fi + + local name="$1" + local file="$2" + + echo -n "$name" >"$DIR"/trigger_custom_fallback 2>/dev/null & + + # Give kernel a chance to react. + local timeout=10 + while [ ! -e "$DIR"/"$name"/loading ]; do + sleep 0.1 + timeout=$(( $timeout - 1 )) + if [ "$timeout" -eq 0 ]; then + echo "$0: firmware interface never appeared" >&2 + exit 1 + fi + done + + echo -1 >"$DIR"/"$name"/loading + + # Wait for request to finish. + wait + return 0 +} + +load_fw_fallback_with_child() +{ + local name="$1" + local file="$2" + + # This is the value already set but we want to be explicit + echo 4 >/sys/class/firmware/timeout + + sleep 1 & + SECONDS_BEFORE=$(date +%s) + echo -n "$name" >"$DIR"/trigger_request 2>/dev/null + SECONDS_AFTER=$(date +%s) + SECONDS_DELTA=$(($SECONDS_AFTER - $SECONDS_BEFORE)) + if [ "$SECONDS_DELTA" -lt 4 ]; then + RET=1 + else + RET=0 + fi + wait + return $RET +} + +test_syfs_timeout() +{ + DEVPATH="$DIR"/"nope-$NAME"/loading + + # Test failure when doing nothing (timeout works). + echo -n 2 >/sys/class/firmware/timeout + echo -n "nope-$NAME" >"$DIR"/trigger_request 2>/dev/null & + + # Give the kernel some time to load the loading file, must be less + # than the timeout above. + sleep 1 + if [ ! -f $DEVPATH ]; then + echo "$0: fallback mechanism immediately cancelled" + echo "" + echo "The file never appeared: $DEVPATH" + echo "" + echo "This might be a distribution udev rule setup by your distribution" + echo "to immediately cancel all fallback requests, this must be" + echo "removed before running these tests. To confirm look for" + echo "a firmware rule like /lib/udev/rules.d/50-firmware.rules" + echo "and see if you have something like this:" + echo "" + echo "SUBSYSTEM==\"firmware\", ACTION==\"add\", ATTR{loading}=\"-1\"" + echo "" + echo "If you do remove this file or comment out this line before" + echo "proceeding with these tests." + exit 1 + fi + + if diff -q "$FW" /dev/test_firmware >/dev/null ; then + echo "$0: firmware was not expected to match" >&2 + exit 1 + else + echo "$0: timeout works" + fi +} + +run_sysfs_main_tests() +{ + test_syfs_timeout + # Put timeout high enough for us to do work but not so long that failures + # slow down this test too much. + echo 4 >/sys/class/firmware/timeout + + # Load this script instead of the desired firmware. + load_fw "$NAME" "$0" + if diff -q "$FW" /dev/test_firmware >/dev/null ; then + echo "$0: firmware was not expected to match" >&2 + exit 1 + else + echo "$0: firmware comparison works" + fi + + # Do a proper load, which should work correctly. + load_fw "$NAME" "$FW" + if ! diff -q "$FW" /dev/test_firmware >/dev/null ; then + echo "$0: firmware was not loaded" >&2 + exit 1 + else + echo "$0: fallback mechanism works" + fi + + load_fw_cancel "nope-$NAME" "$FW" + if diff -q "$FW" /dev/test_firmware >/dev/null ; then + echo "$0: firmware was expected to be cancelled" >&2 + exit 1 + else + echo "$0: cancelling fallback mechanism works" + fi + + set +e + load_fw_fallback_with_child "nope-signal-$NAME" "$FW" + if [ "$?" -eq 0 ]; then + echo "$0: SIGCHLD on sync ignored as expected" >&2 + else + echo "$0: error - sync firmware request cancelled due to SIGCHLD" >&2 + exit 1 + fi + set -e +} + +run_sysfs_custom_load_tests() +{ + RANDOM_FILE_PATH=$(setup_random_file) + RANDOM_FILE="$(basename $RANDOM_FILE_PATH)" + if load_fw_custom "$RANDOM_FILE" "$RANDOM_FILE_PATH" ; then + if ! diff -q "$RANDOM_FILE_PATH" /dev/test_firmware >/dev/null ; then + echo "$0: firmware was not loaded" >&2 + exit 1 + else + echo "$0: custom fallback loading mechanism works" + fi + fi + + RANDOM_FILE_PATH=$(setup_random_file) + RANDOM_FILE="$(basename $RANDOM_FILE_PATH)" + if load_fw_custom "$RANDOM_FILE" "$RANDOM_FILE_PATH" ; then + if ! diff -q "$RANDOM_FILE_PATH" /dev/test_firmware >/dev/null ; then + echo "$0: firmware was not loaded" >&2 + exit 1 + else + echo "$0: custom fallback loading mechanism works" + fi + fi + + RANDOM_FILE_REAL="$RANDOM_FILE_PATH" + FAKE_RANDOM_FILE_PATH=$(setup_random_file_fake) + FAKE_RANDOM_FILE="$(basename $FAKE_RANDOM_FILE_PATH)" + + if load_fw_custom_cancel "$FAKE_RANDOM_FILE" "$RANDOM_FILE_REAL" ; then + if diff -q "$RANDOM_FILE_PATH" /dev/test_firmware >/dev/null ; then + echo "$0: firmware was expected to be cancelled" >&2 + exit 1 + else + echo "$0: cancelling custom fallback mechanism works" + fi + fi +} + +if [ "$HAS_FW_LOADER_USER_HELPER_FALLBACK" = "yes" ]; then + run_sysfs_main_tests +fi + +run_sysfs_custom_load_tests + +exit 0 diff --git a/tools/testing/selftests/firmware/fw_filesystem.sh b/tools/testing/selftests/firmware/fw_filesystem.sh new file mode 100755 index 000000000..1a99aea05 --- /dev/null +++ b/tools/testing/selftests/firmware/fw_filesystem.sh @@ -0,0 +1,546 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 +# This validates that the kernel will load firmware out of its list of +# firmware locations on disk. Since the user helper does similar work, +# we reset the custom load directory to a location the user helper doesn't +# know so we can be sure we're not accidentally testing the user helper. +set -e + +TEST_REQS_FW_SYSFS_FALLBACK="no" +TEST_REQS_FW_SET_CUSTOM_PATH="yes" +TEST_DIR=$(dirname $0) +source $TEST_DIR/fw_lib.sh + +RUN_XZ="xz -C crc32 --lzma2=dict=2MiB" +RUN_ZSTD="zstd -q" + +check_mods +check_setup +verify_reqs +setup_tmp_file + +trap "test_finish" EXIT + +if [ "$HAS_FW_LOADER_USER_HELPER" = "yes" ]; then + # Turn down the timeout so failures don't take so long. + echo 1 >/sys/class/firmware/timeout +fi + +if printf '\000' >"$DIR"/trigger_request 2> /dev/null; then + echo "$0: empty filename should not succeed" >&2 + exit 1 +fi + +if [ ! -e "$DIR"/trigger_async_request ]; then + echo "$0: empty filename: async trigger not present, ignoring test" >&2 + exit $ksft_skip +else + if printf '\000' >"$DIR"/trigger_async_request 2> /dev/null; then + echo "$0: empty filename should not succeed (async)" >&2 + exit 1 + fi +fi + +# Request a firmware that doesn't exist, it should fail. +if echo -n "nope-$NAME" >"$DIR"/trigger_request 2> /dev/null; then + echo "$0: firmware shouldn't have loaded" >&2 + exit 1 +fi +if diff -q "$FW" /dev/test_firmware >/dev/null ; then + echo "$0: firmware was not expected to match" >&2 + exit 1 +else + if [ "$HAS_FW_LOADER_USER_HELPER" = "yes" ]; then + echo "$0: timeout works" + fi +fi + +# This should succeed via kernel load or will fail after 1 second after +# being handed over to the user helper, which won't find the fw either. +if ! echo -n "$NAME" >"$DIR"/trigger_request ; then + echo "$0: could not trigger request" >&2 + exit 1 +fi + +# Verify the contents are what we expect. +if ! diff -q "$FW" /dev/test_firmware >/dev/null ; then + echo "$0: firmware was not loaded" >&2 + exit 1 +else + echo "$0: filesystem loading works" +fi + +# Try the asynchronous version too +if [ ! -e "$DIR"/trigger_async_request ]; then + echo "$0: firmware loading: async trigger not present, ignoring test" >&2 + exit $ksft_skip +else + if ! echo -n "$NAME" >"$DIR"/trigger_async_request ; then + echo "$0: could not trigger async request" >&2 + exit 1 + fi + + # Verify the contents are what we expect. + if ! diff -q "$FW" /dev/test_firmware >/dev/null ; then + echo "$0: firmware was not loaded (async)" >&2 + exit 1 + else + echo "$0: async filesystem loading works" + fi +fi + +# Try platform (EFI embedded fw) loading too +if [ ! -e "$DIR"/trigger_request_platform ]; then + echo "$0: firmware loading: platform trigger not present, ignoring test" >&2 +else + if printf '\000' >"$DIR"/trigger_request_platform 2> /dev/null; then + echo "$0: empty filename should not succeed (platform)" >&2 + exit 1 + fi + + # Note we echo a non-existing name, since files on the file-system + # are preferred over firmware embedded inside the platform's firmware + # The test adds a fake entry with the requested name to the platform's + # fw list, so the name does not matter as long as it does not exist + if ! echo -n "nope-$NAME" >"$DIR"/trigger_request_platform ; then + echo "$0: could not trigger request platform" >&2 + exit 1 + fi + + # The test verifies itself that the loaded firmware contents matches + # the contents for the fake platform fw entry it added. + echo "$0: platform loading works" +fi + +### Batched requests tests +test_config_present() +{ + if [ ! -f $DIR/reset ]; then + echo "Configuration triggers not present, ignoring test" + exit $ksft_skip + fi +} + +# Defaults : +# +# send_uevent: 1 +# sync_direct: 0 +# name: test-firmware.bin +# num_requests: 4 +config_reset() +{ + echo 1 > $DIR/reset +} + +release_all_firmware() +{ + echo 1 > $DIR/release_all_firmware +} + +config_set_name() +{ + echo -n $1 > $DIR/config_name +} + +config_set_into_buf() +{ + echo 1 > $DIR/config_into_buf +} + +config_unset_into_buf() +{ + echo 0 > $DIR/config_into_buf +} + +config_set_buf_size() +{ + echo $1 > $DIR/config_buf_size +} + +config_set_file_offset() +{ + echo $1 > $DIR/config_file_offset +} + +config_set_partial() +{ + echo 1 > $DIR/config_partial +} + +config_unset_partial() +{ + echo 0 > $DIR/config_partial +} + +config_set_sync_direct() +{ + echo 1 > $DIR/config_sync_direct +} + +config_unset_sync_direct() +{ + echo 0 > $DIR/config_sync_direct +} + +config_set_uevent() +{ + echo 1 > $DIR/config_send_uevent +} + +config_unset_uevent() +{ + echo 0 > $DIR/config_send_uevent +} + +config_trigger_sync() +{ + echo -n 1 > $DIR/trigger_batched_requests 2>/dev/null +} + +config_trigger_async() +{ + echo -n 1 > $DIR/trigger_batched_requests_async 2> /dev/null +} + +config_set_read_fw_idx() +{ + echo -n $1 > $DIR/config_read_fw_idx 2> /dev/null +} + +read_firmwares() +{ + if [ "$(cat $DIR/config_into_buf)" == "1" ]; then + fwfile="$FW_INTO_BUF" + else + fwfile="$FW" + fi + if [ "$1" = "componly" ]; then + fwfile="${fwfile}-orig" + fi + for i in $(seq 0 3); do + config_set_read_fw_idx $i + # Verify the contents are what we expect. + # -Z required for now -- check for yourself, md5sum + # on $FW and DIR/read_firmware will yield the same. Even + # cmp agrees, so something is off. + if ! diff -q -Z "$fwfile" $DIR/read_firmware 2>/dev/null ; then + echo "request #$i: firmware was not loaded" >&2 + exit 1 + fi + done +} + +read_partial_firmwares() +{ + if [ "$(cat $DIR/config_into_buf)" == "1" ]; then + fwfile="${FW_INTO_BUF}" + else + fwfile="${FW}" + fi + + if [ "$1" = "componly" ]; then + fwfile="${fwfile}-orig" + fi + + # Strip fwfile down to match partial offset and length + partial_data="$(cat $fwfile)" + partial_data="${partial_data:$2:$3}" + + for i in $(seq 0 3); do + config_set_read_fw_idx $i + + read_firmware="$(cat $DIR/read_firmware)" + + # Verify the contents are what we expect. + if [ $read_firmware != $partial_data ]; then + echo "request #$i: partial firmware was not loaded" >&2 + exit 1 + fi + done +} + +read_firmwares_expect_nofile() +{ + for i in $(seq 0 3); do + config_set_read_fw_idx $i + # Ensures contents differ + if diff -q -Z "$FW" $DIR/read_firmware 2>/dev/null ; then + echo "request $i: file was not expected to match" >&2 + exit 1 + fi + done +} + +test_batched_request_firmware_nofile() +{ + echo -n "Batched request_firmware() nofile try #$1: " + config_reset + config_set_name nope-test-firmware.bin + config_trigger_sync + read_firmwares_expect_nofile + release_all_firmware + echo "OK" +} + +test_batched_request_firmware_into_buf_nofile() +{ + echo -n "Batched request_firmware_into_buf() nofile try #$1: " + config_reset + config_set_name nope-test-firmware.bin + config_set_into_buf + config_trigger_sync + read_firmwares_expect_nofile + release_all_firmware + echo "OK" +} + +test_request_partial_firmware_into_buf_nofile() +{ + echo -n "Test request_partial_firmware_into_buf() off=$1 size=$2 nofile: " + config_reset + config_set_name nope-test-firmware.bin + config_set_into_buf + config_set_partial + config_set_buf_size $2 + config_set_file_offset $1 + config_trigger_sync + read_firmwares_expect_nofile + release_all_firmware + echo "OK" +} + +test_batched_request_firmware_direct_nofile() +{ + echo -n "Batched request_firmware_direct() nofile try #$1: " + config_reset + config_set_name nope-test-firmware.bin + config_set_sync_direct + config_trigger_sync + release_all_firmware + echo "OK" +} + +test_request_firmware_nowait_uevent_nofile() +{ + echo -n "Batched request_firmware_nowait(uevent=true) nofile try #$1: " + config_reset + config_set_name nope-test-firmware.bin + config_trigger_async + release_all_firmware + echo "OK" +} + +test_wait_and_cancel_custom_load() +{ + if [ "$HAS_FW_LOADER_USER_HELPER" != "yes" ]; then + return + fi + local timeout=10 + name=$1 + while [ ! -e "$DIR"/"$name"/loading ]; do + sleep 0.1 + timeout=$(( $timeout - 1 )) + if [ "$timeout" -eq 0 ]; then + echo "firmware interface never appeared:" >&2 + echo "$DIR/$name/loading" >&2 + exit 1 + fi + done + echo -1 >"$DIR"/"$name"/loading +} + +test_request_firmware_nowait_custom_nofile() +{ + echo -n "Batched request_firmware_nowait(uevent=false) nofile try #$1: " + config_reset + config_unset_uevent + RANDOM_FILE_PATH=$(setup_random_file_fake) + RANDOM_FILE="$(basename $RANDOM_FILE_PATH)" + config_set_name $RANDOM_FILE + config_trigger_async & + test_wait_and_cancel_custom_load $RANDOM_FILE + wait + release_all_firmware + echo "OK" +} + +test_batched_request_firmware() +{ + echo -n "Batched request_firmware() $2 try #$1: " + config_reset + config_trigger_sync + read_firmwares $2 + release_all_firmware + echo "OK" +} + +test_batched_request_firmware_into_buf() +{ + echo -n "Batched request_firmware_into_buf() $2 try #$1: " + config_reset + config_set_name $TEST_FIRMWARE_INTO_BUF_FILENAME + config_set_into_buf + config_trigger_sync + read_firmwares $2 + release_all_firmware + echo "OK" +} + +test_batched_request_firmware_direct() +{ + echo -n "Batched request_firmware_direct() $2 try #$1: " + config_reset + config_set_sync_direct + config_trigger_sync + release_all_firmware + echo "OK" +} + +test_request_firmware_nowait_uevent() +{ + echo -n "Batched request_firmware_nowait(uevent=true) $2 try #$1: " + config_reset + config_trigger_async + release_all_firmware + echo "OK" +} + +test_request_firmware_nowait_custom() +{ + echo -n "Batched request_firmware_nowait(uevent=false) $2 try #$1: " + config_reset + config_unset_uevent + RANDOM_FILE_PATH=$(setup_random_file) + RANDOM_FILE="$(basename $RANDOM_FILE_PATH)" + if [ -n "$2" -a "$2" != "normal" ]; then + compress_"$2"_"$COMPRESS_FORMAT" $RANDOM_FILE_PATH + fi + config_set_name $RANDOM_FILE + config_trigger_async + release_all_firmware + echo "OK" +} + +test_request_partial_firmware_into_buf() +{ + echo -n "Test request_partial_firmware_into_buf() off=$1 size=$2: " + config_reset + config_set_name $TEST_FIRMWARE_INTO_BUF_FILENAME + config_set_into_buf + config_set_partial + config_set_buf_size $2 + config_set_file_offset $1 + config_trigger_sync + read_partial_firmwares normal $1 $2 + release_all_firmware + echo "OK" +} + +do_tests () +{ + mode="$1" + suffix="$2" + + for i in $(seq 1 5); do + test_batched_request_firmware$suffix $i $mode + done + + for i in $(seq 1 5); do + test_batched_request_firmware_into_buf$suffix $i $mode + done + + for i in $(seq 1 5); do + test_batched_request_firmware_direct$suffix $i $mode + done + + for i in $(seq 1 5); do + test_request_firmware_nowait_uevent$suffix $i $mode + done + + for i in $(seq 1 5); do + test_request_firmware_nowait_custom$suffix $i $mode + done +} + +# Only continue if batched request triggers are present on the +# test-firmware driver +test_config_present + +# test with the file present +echo +echo "Testing with the file present..." +do_tests normal + +# Partial loads cannot use fallback, so do not repeat tests. +test_request_partial_firmware_into_buf 0 10 +test_request_partial_firmware_into_buf 0 5 +test_request_partial_firmware_into_buf 1 6 +test_request_partial_firmware_into_buf 2 10 + +# Test for file not found, errors are expected, the failure would be +# a hung task, which would require a hard reset. +echo +echo "Testing with the file missing..." +do_tests nofile _nofile + +# Partial loads cannot use fallback, so do not repeat tests. +test_request_partial_firmware_into_buf_nofile 0 10 +test_request_partial_firmware_into_buf_nofile 0 5 +test_request_partial_firmware_into_buf_nofile 1 6 +test_request_partial_firmware_into_buf_nofile 2 10 + +test_request_firmware_compressed () +{ + export COMPRESS_FORMAT="$1" + + # test with both files present + compress_both_"$COMPRESS_FORMAT" $FW + compress_both_"$COMPRESS_FORMAT" $FW_INTO_BUF + + config_set_name $NAME + echo + echo "Testing with both plain and $COMPRESS_FORMAT files present..." + do_tests both + + # test with only compressed file present + mv "$FW" "${FW}-orig" + mv "$FW_INTO_BUF" "${FW_INTO_BUF}-orig" + + config_set_name $NAME + echo + echo "Testing with only $COMPRESS_FORMAT file present..." + do_tests componly + + mv "${FW}-orig" "$FW" + mv "${FW_INTO_BUF}-orig" "$FW_INTO_BUF" +} + +compress_both_XZ () +{ + $RUN_XZ -k "$@" +} + +compress_componly_XZ () +{ + $RUN_XZ "$@" +} + +compress_both_ZSTD () +{ + $RUN_ZSTD -k "$@" +} + +compress_componly_ZSTD () +{ + $RUN_ZSTD --rm "$@" +} + +if test "$HAS_FW_LOADER_COMPRESS_XZ" = "yes"; then + test_request_firmware_compressed XZ +fi + +if test "$HAS_FW_LOADER_COMPRESS_ZSTD" = "yes"; then + test_request_firmware_compressed ZSTD +fi + +exit 0 diff --git a/tools/testing/selftests/firmware/fw_lib.sh b/tools/testing/selftests/firmware/fw_lib.sh new file mode 100755 index 000000000..7bffd6780 --- /dev/null +++ b/tools/testing/selftests/firmware/fw_lib.sh @@ -0,0 +1,236 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 + +# Library of helpers for test scripts. +set -e + +DIR=/sys/devices/virtual/misc/test_firmware + +PROC_CONFIG="/proc/config.gz" +TEST_DIR=$(dirname $0) + +# We need to load a different file to test request_firmware_into_buf +# I believe the issue is firmware loaded cached vs. non-cached +# with same filename is bungled. +# To reproduce rename this to test-firmware.bin +TEST_FIRMWARE_INTO_BUF_FILENAME=test-firmware-into-buf.bin + +# Kselftest framework requirement - SKIP code is 4. +ksft_skip=4 + +print_reqs_exit() +{ + echo "You must have the following enabled in your kernel:" >&2 + cat $TEST_DIR/config >&2 + exit $ksft_skip +} + +test_modprobe() +{ + if [ ! -d $DIR ]; then + print_reqs_exit + fi +} + +check_mods() +{ + local uid=$(id -u) + if [ $uid -ne 0 ]; then + echo "skip all tests: must be run as root" >&2 + exit $ksft_skip + fi + + trap "test_modprobe" EXIT + if [ ! -d $DIR ]; then + modprobe test_firmware + fi + if [ ! -f $PROC_CONFIG ]; then + if modprobe configs 2>/dev/null; then + echo "Loaded configs module" + if [ ! -f $PROC_CONFIG ]; then + echo "You must have the following enabled in your kernel:" >&2 + cat $TEST_DIR/config >&2 + echo "Resorting to old heuristics" >&2 + fi + else + echo "Failed to load configs module, using old heuristics" >&2 + fi + fi +} + +check_setup() +{ + HAS_FW_LOADER_USER_HELPER="$(kconfig_has CONFIG_FW_LOADER_USER_HELPER=y)" + HAS_FW_LOADER_USER_HELPER_FALLBACK="$(kconfig_has CONFIG_FW_LOADER_USER_HELPER_FALLBACK=y)" + HAS_FW_LOADER_COMPRESS_XZ="$(kconfig_has CONFIG_FW_LOADER_COMPRESS_XZ=y)" + HAS_FW_LOADER_COMPRESS_ZSTD="$(kconfig_has CONFIG_FW_LOADER_COMPRESS_ZSTD=y)" + HAS_FW_UPLOAD="$(kconfig_has CONFIG_FW_UPLOAD=y)" + PROC_FW_IGNORE_SYSFS_FALLBACK="0" + PROC_FW_FORCE_SYSFS_FALLBACK="0" + + if [ -z $PROC_SYS_DIR ]; then + PROC_SYS_DIR="/proc/sys/kernel" + fi + + FW_PROC="${PROC_SYS_DIR}/firmware_config" + FW_FORCE_SYSFS_FALLBACK="$FW_PROC/force_sysfs_fallback" + FW_IGNORE_SYSFS_FALLBACK="$FW_PROC/ignore_sysfs_fallback" + + if [ -f $FW_FORCE_SYSFS_FALLBACK ]; then + PROC_FW_FORCE_SYSFS_FALLBACK="$(cat $FW_FORCE_SYSFS_FALLBACK)" + fi + + if [ -f $FW_IGNORE_SYSFS_FALLBACK ]; then + PROC_FW_IGNORE_SYSFS_FALLBACK="$(cat $FW_IGNORE_SYSFS_FALLBACK)" + fi + + if [ "$PROC_FW_FORCE_SYSFS_FALLBACK" = "1" ]; then + HAS_FW_LOADER_USER_HELPER="yes" + HAS_FW_LOADER_USER_HELPER_FALLBACK="yes" + fi + + if [ "$PROC_FW_IGNORE_SYSFS_FALLBACK" = "1" ]; then + HAS_FW_LOADER_USER_HELPER_FALLBACK="no" + HAS_FW_LOADER_USER_HELPER="no" + fi + + if [ "$HAS_FW_LOADER_USER_HELPER" = "yes" ]; then + OLD_TIMEOUT="$(cat /sys/class/firmware/timeout)" + fi + + OLD_FWPATH="$(cat /sys/module/firmware_class/parameters/path)" + + if [ "$HAS_FW_LOADER_COMPRESS_XZ" = "yes" ]; then + if ! which xz 2> /dev/null > /dev/null; then + HAS_FW_LOADER_COMPRESS_XZ="" + fi + fi + if [ "$HAS_FW_LOADER_COMPRESS_ZSTD" = "yes" ]; then + if ! which zstd 2> /dev/null > /dev/null; then + HAS_FW_LOADER_COMPRESS_ZSTD="" + fi + fi +} + +verify_reqs() +{ + if [ "$TEST_REQS_FW_SYSFS_FALLBACK" = "yes" ]; then + if [ ! "$HAS_FW_LOADER_USER_HELPER" = "yes" ]; then + echo "usermode helper disabled so ignoring test" + exit 0 + fi + fi + if [ "$TEST_REQS_FW_UPLOAD" = "yes" ]; then + if [ ! "$HAS_FW_UPLOAD" = "yes" ]; then + echo "firmware upload disabled so ignoring test" + exit 0 + fi + fi +} + +setup_tmp_file() +{ + FWPATH=$(mktemp -d) + FW="$FWPATH/test-firmware.bin" + echo "ABCD0123" >"$FW" + FW_INTO_BUF="$FWPATH/$TEST_FIRMWARE_INTO_BUF_FILENAME" + echo "EFGH4567" >"$FW_INTO_BUF" + NAME=$(basename "$FW") + if [ "$TEST_REQS_FW_SET_CUSTOM_PATH" = "yes" ]; then + echo -n "$FWPATH" >/sys/module/firmware_class/parameters/path + fi +} + +__setup_random_file() +{ + RANDOM_FILE_PATH="$(mktemp -p $FWPATH)" + # mktemp says dry-run -n is unsafe, so... + if [[ "$1" = "fake" ]]; then + rm -rf $RANDOM_FILE_PATH + sync + else + echo "ABCD0123" >"$RANDOM_FILE_PATH" + fi + echo $RANDOM_FILE_PATH +} + +setup_random_file() +{ + echo $(__setup_random_file) +} + +setup_random_file_fake() +{ + echo $(__setup_random_file fake) +} + +proc_set_force_sysfs_fallback() +{ + if [ -f $FW_FORCE_SYSFS_FALLBACK ]; then + echo -n $1 > $FW_FORCE_SYSFS_FALLBACK + check_setup + fi +} + +proc_set_ignore_sysfs_fallback() +{ + if [ -f $FW_IGNORE_SYSFS_FALLBACK ]; then + echo -n $1 > $FW_IGNORE_SYSFS_FALLBACK + check_setup + fi +} + +proc_restore_defaults() +{ + proc_set_force_sysfs_fallback 0 + proc_set_ignore_sysfs_fallback 0 +} + +test_finish() +{ + if [ "$HAS_FW_LOADER_USER_HELPER" = "yes" ]; then + echo "$OLD_TIMEOUT" >/sys/class/firmware/timeout + fi + if [ "$TEST_REQS_FW_SET_CUSTOM_PATH" = "yes" ]; then + if [ "$OLD_FWPATH" = "" ]; then + # A zero-length write won't work; write a null byte + printf '\000' >/sys/module/firmware_class/parameters/path + else + echo -n "$OLD_FWPATH" >/sys/module/firmware_class/parameters/path + fi + fi + if [ -f $FW ]; then + rm -f "$FW" + fi + if [ -f $FW_INTO_BUF ]; then + rm -f "$FW_INTO_BUF" + fi + if [ -d $FWPATH ]; then + rm -rf "$FWPATH" + fi + proc_restore_defaults +} + +kconfig_has() +{ + if [ -f $PROC_CONFIG ]; then + if zgrep -q $1 $PROC_CONFIG 2>/dev/null; then + echo "yes" + else + echo "no" + fi + else + # We currently don't have easy heuristics to infer this + # so best we can do is just try to use the kernel assuming + # you had enabled it. This matches the old behaviour. + if [ "$1" = "CONFIG_FW_LOADER_USER_HELPER_FALLBACK=y" ]; then + echo "yes" + elif [ "$1" = "CONFIG_FW_LOADER_USER_HELPER=y" ]; then + if [ -d /sys/class/firmware/ ]; then + echo yes + else + echo no + fi + fi + fi +} diff --git a/tools/testing/selftests/firmware/fw_namespace.c b/tools/testing/selftests/firmware/fw_namespace.c new file mode 100644 index 000000000..04757dc7e --- /dev/null +++ b/tools/testing/selftests/firmware/fw_namespace.c @@ -0,0 +1,148 @@ +// SPDX-License-Identifier: GPL-2.0 +/* Test triggering of loading of firmware from different mount + * namespaces. Expect firmware to be always loaded from the mount + * namespace of PID 1. */ +#define _GNU_SOURCE +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +static char *fw_path = NULL; + +static void die(char *fmt, ...) +{ + va_list ap; + + va_start(ap, fmt); + vfprintf(stderr, fmt, ap); + va_end(ap); + if (fw_path) + unlink(fw_path); + umount("/lib/firmware"); + exit(EXIT_FAILURE); +} + +static void trigger_fw(const char *fw_name, const char *sys_path) +{ + int fd; + + fd = open(sys_path, O_WRONLY); + if (fd < 0) + die("open failed: %s\n", + strerror(errno)); + if (write(fd, fw_name, strlen(fw_name)) != strlen(fw_name)) + exit(EXIT_FAILURE); + close(fd); +} + +static void setup_fw(const char *fw_path) +{ + int fd; + const char fw[] = "ABCD0123"; + + fd = open(fw_path, O_WRONLY | O_CREAT, 0600); + if (fd < 0) + die("open failed: %s\n", + strerror(errno)); + if (write(fd, fw, sizeof(fw) -1) != sizeof(fw) -1) + die("write failed: %s\n", + strerror(errno)); + close(fd); +} + +static bool test_fw_in_ns(const char *fw_name, const char *sys_path, bool block_fw_in_parent_ns) +{ + pid_t child; + + if (block_fw_in_parent_ns) + if (mount("test", "/lib/firmware", "tmpfs", MS_RDONLY, NULL) == -1) + die("blocking firmware in parent ns failed\n"); + + child = fork(); + if (child == -1) { + die("fork failed: %s\n", + strerror(errno)); + } + if (child != 0) { /* parent */ + pid_t pid; + int status; + + pid = waitpid(child, &status, 0); + if (pid == -1) { + die("waitpid failed: %s\n", + strerror(errno)); + } + if (pid != child) { + die("waited for %d got %d\n", + child, pid); + } + if (!WIFEXITED(status)) { + die("child did not terminate cleanly\n"); + } + if (block_fw_in_parent_ns) + umount("/lib/firmware"); + return WEXITSTATUS(status) == EXIT_SUCCESS; + } + + if (unshare(CLONE_NEWNS) != 0) { + die("unshare(CLONE_NEWNS) failed: %s\n", + strerror(errno)); + } + if (mount(NULL, "/", NULL, MS_SLAVE|MS_REC, NULL) == -1) + die("remount root in child ns failed\n"); + + if (!block_fw_in_parent_ns) { + if (mount("test", "/lib/firmware", "tmpfs", MS_RDONLY, NULL) == -1) + die("blocking firmware in child ns failed\n"); + } else + umount("/lib/firmware"); + + trigger_fw(fw_name, sys_path); + + exit(EXIT_SUCCESS); +} + +int main(int argc, char **argv) +{ + const char *fw_name = "test-firmware.bin"; + char *sys_path; + if (argc != 2) + die("usage: %s sys_path\n", argv[0]); + + /* Mount tmpfs to /lib/firmware so we don't have to assume + that it is writable for us.*/ + if (mount("test", "/lib/firmware", "tmpfs", 0, NULL) == -1) + die("mounting tmpfs to /lib/firmware failed\n"); + + sys_path = argv[1]; + if (asprintf(&fw_path, "/lib/firmware/%s", fw_name) < 0) + die("error: failed to build full fw_path\n"); + + setup_fw(fw_path); + + setvbuf(stdout, NULL, _IONBF, 0); + /* Positive case: firmware in PID1 mount namespace */ + printf("Testing with firmware in parent namespace (assumed to be same file system as PID1)\n"); + if (!test_fw_in_ns(fw_name, sys_path, false)) + die("error: failed to access firmware\n"); + + /* Negative case: firmware in child mount namespace, expected to fail */ + printf("Testing with firmware in child namespace\n"); + if (test_fw_in_ns(fw_name, sys_path, true)) + die("error: firmware access did not fail\n"); + + unlink(fw_path); + free(fw_path); + umount("/lib/firmware"); + exit(EXIT_SUCCESS); +} diff --git a/tools/testing/selftests/firmware/fw_run_tests.sh b/tools/testing/selftests/firmware/fw_run_tests.sh new file mode 100755 index 000000000..f6d95a2d5 --- /dev/null +++ b/tools/testing/selftests/firmware/fw_run_tests.sh @@ -0,0 +1,79 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 + +# This runs all known tests across all known possible configurations we could +# emulate in one run. + +set -e + +TEST_DIR=$(dirname $0) +source $TEST_DIR/fw_lib.sh + +export HAS_FW_LOADER_USER_HELPER="" +export HAS_FW_LOADER_USER_HELPER_FALLBACK="" +export HAS_FW_LOADER_COMPRESS="" + +run_tests() +{ + proc_set_force_sysfs_fallback $1 + proc_set_ignore_sysfs_fallback $2 + $TEST_DIR/fw_filesystem.sh + + proc_set_force_sysfs_fallback $1 + proc_set_ignore_sysfs_fallback $2 + $TEST_DIR/fw_fallback.sh + + proc_set_force_sysfs_fallback $1 + proc_set_ignore_sysfs_fallback $2 + $TEST_DIR/fw_upload.sh +} + +run_test_config_0001() +{ + echo "-----------------------------------------------------" + echo "Running kernel configuration test 1 -- rare" + echo "Emulates:" + echo "CONFIG_FW_LOADER=y" + echo "CONFIG_FW_LOADER_USER_HELPER=n" + echo "CONFIG_FW_LOADER_USER_HELPER_FALLBACK=n" + run_tests 0 1 +} + +run_test_config_0002() +{ + echo "-----------------------------------------------------" + echo "Running kernel configuration test 2 -- distro" + echo "Emulates:" + echo "CONFIG_FW_LOADER=y" + echo "CONFIG_FW_LOADER_USER_HELPER=y" + echo "CONFIG_FW_LOADER_USER_HELPER_FALLBACK=n" + proc_set_ignore_sysfs_fallback 0 + run_tests 0 0 +} + +run_test_config_0003() +{ + echo "-----------------------------------------------------" + echo "Running kernel configuration test 3 -- android" + echo "Emulates:" + echo "CONFIG_FW_LOADER=y" + echo "CONFIG_FW_LOADER_USER_HELPER=y" + echo "CONFIG_FW_LOADER_USER_HELPER_FALLBACK=y" + run_tests 1 0 +} + +check_mods +check_setup + +echo "Running namespace test: " +$TEST_DIR/fw_namespace $DIR/trigger_request +echo "OK" + +if [ -f $FW_FORCE_SYSFS_FALLBACK ]; then + run_test_config_0001 + run_test_config_0002 + run_test_config_0003 +else + echo "Running basic kernel configuration, working with your config" + run_tests +fi diff --git a/tools/testing/selftests/firmware/fw_upload.sh b/tools/testing/selftests/firmware/fw_upload.sh new file mode 100755 index 000000000..c7a6f06c9 --- /dev/null +++ b/tools/testing/selftests/firmware/fw_upload.sh @@ -0,0 +1,214 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 +# This validates the user-initiated fw upload mechanism of the firmware +# loader. It verifies that one or more firmware devices can be created +# for a device driver. It also verifies the data transfer, the +# cancellation support, and the error flows. +set -e + +TEST_REQS_FW_UPLOAD="yes" +TEST_DIR=$(dirname $0) + +progress_states="preparing transferring programming" +errors="hw-error + timeout + device-busy + invalid-file-size + read-write-error + flash-wearout" +error_abort="user-abort" +fwname1=fw1 +fwname2=fw2 +fwname3=fw3 + +source $TEST_DIR/fw_lib.sh + +check_mods +check_setup +verify_reqs + +trap "upload_finish" EXIT + +upload_finish() { + local fwdevs="$fwname1 $fwname2 $fwname3" + + for name in $fwdevs; do + if [ -e "$DIR/$name" ]; then + echo -n "$name" > "$DIR"/upload_unregister + fi + done +} + +upload_fw() { + local name="$1" + local file="$2" + + echo 1 > "$DIR"/"$name"/loading + cat "$file" > "$DIR"/"$name"/data + echo 0 > "$DIR"/"$name"/loading +} + +verify_fw() { + local name="$1" + local file="$2" + + echo -n "$name" > "$DIR"/config_upload_name + if ! cmp "$file" "$DIR"/upload_read > /dev/null 2>&1; then + echo "$0: firmware compare for $name did not match" >&2 + exit 1 + fi + + echo "$0: firmware upload for $name works" >&2 + return 0 +} + +inject_error() { + local name="$1" + local status="$2" + local error="$3" + + echo 1 > "$DIR"/"$name"/loading + echo -n "inject":"$status":"$error" > "$DIR"/"$name"/data + echo 0 > "$DIR"/"$name"/loading +} + +await_status() { + local name="$1" + local expected="$2" + local status + local i + + let i=0 + while [ $i -lt 50 ]; do + status=$(cat "$DIR"/"$name"/status) + if [ "$status" = "$expected" ]; then + return 0; + fi + sleep 1e-03 + let i=$i+1 + done + + echo "$0: Invalid status: Expected $expected, Actual $status" >&2 + return 1; +} + +await_idle() { + local name="$1" + + await_status "$name" "idle" + return $? +} + +expect_error() { + local name="$1" + local expected="$2" + local error=$(cat "$DIR"/"$name"/error) + + if [ "$error" != "$expected" ]; then + echo "Invalid error: Expected $expected, Actual $error" >&2 + return 1 + fi + + return 0 +} + +random_firmware() { + local bs="$1" + local count="$2" + local file=$(mktemp -p /tmp uploadfwXXX.bin) + + dd if=/dev/urandom of="$file" bs="$bs" count="$count" > /dev/null 2>&1 + echo "$file" +} + +test_upload_cancel() { + local name="$1" + local status + + for status in $progress_states; do + inject_error $name $status $error_abort + if ! await_status $name $status; then + exit 1 + fi + + echo 1 > "$DIR"/"$name"/cancel + + if ! await_idle $name; then + exit 1 + fi + + if ! expect_error $name "$status":"$error_abort"; then + exit 1 + fi + done + + echo "$0: firmware upload cancellation works" + return 0 +} + +test_error_handling() { + local name=$1 + local status + local error + + for status in $progress_states; do + for error in $errors; do + inject_error $name $status $error + + if ! await_idle $name; then + exit 1 + fi + + if ! expect_error $name "$status":"$error"; then + exit 1 + fi + + done + done + echo "$0: firmware upload error handling works" +} + +test_fw_too_big() { + local name=$1 + local fw_too_big=`random_firmware 512 5` + local expected="preparing:invalid-file-size" + + upload_fw $name $fw_too_big + rm -f $fw_too_big + + if ! await_idle $name; then + exit 1 + fi + + if ! expect_error $name $expected; then + exit 1 + fi + + echo "$0: oversized firmware error handling works" +} + +echo -n "$fwname1" > "$DIR"/upload_register +echo -n "$fwname2" > "$DIR"/upload_register +echo -n "$fwname3" > "$DIR"/upload_register + +test_upload_cancel $fwname1 +test_error_handling $fwname1 +test_fw_too_big $fwname1 + +fw_file1=`random_firmware 512 4` +fw_file2=`random_firmware 512 3` +fw_file3=`random_firmware 512 2` + +upload_fw $fwname1 $fw_file1 +upload_fw $fwname2 $fw_file2 +upload_fw $fwname3 $fw_file3 + +verify_fw ${fwname1} ${fw_file1} +verify_fw ${fwname2} ${fw_file2} +verify_fw ${fwname3} ${fw_file3} + +echo -n "$fwname1" > "$DIR"/upload_unregister +echo -n "$fwname2" > "$DIR"/upload_unregister +echo -n "$fwname3" > "$DIR"/upload_unregister + +exit 0 diff --git a/tools/testing/selftests/firmware/settings b/tools/testing/selftests/firmware/settings new file mode 100644 index 000000000..085e664ee --- /dev/null +++ b/tools/testing/selftests/firmware/settings @@ -0,0 +1,8 @@ +# The async firmware timeout is set to 1 second (but ends up being effectively +# 2 seconds). There are 3 test configs, each done with and without firmware +# present, each with 2 "nowait" functions tested 5 times. Expected time for a +# normal execution should be 2 * 3 * 2 * 2 * 5 = 120 seconds for those alone. +# Additionally, fw_fallback may take 5 seconds for internal timeouts in each +# of the 3 configs, so at least another 15 seconds are needed. Add another +# 10 seconds for each testing config: 120 + 15 + 30 +timeout=165 -- cgit v1.3.1