From cf9610f9116d55c5a66ef9f1faecacabd93a9322 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Mon, 24 Aug 2026 08:46:03 -0700 Subject: Merge tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control updates from Linus Walleij: "Core changes: - Use the non-blocking mux_state_try_select() in the generic MUX pin control back-end - Free pin maps on pinctrl_generic_to_map() failure in the core helpers New hardware pin control: - Qualcomm Maili TLMM SoC, PMG1110 PMIC, and Eliza LPASS LPI TLMM SoC (this is for the low power audio, LPASS = Low Power Audio SubSystem portions) - Upboard support on top of the Intel pin controller - Apple T6030 and T6031 support (just compatible strings) - Samsung Exynos 8855 SoC - Mediatek MT6858 SoC - Rockchip RK3308B and RV1106 SoCs - Airoha EN7523 and AN7563 SoCs Improvements: - Qualcomm TLMM GPIOs are unconditionally marked as wakeup capable - Qualcomm improvements on top of the Qualcomm PDC (power domain controller) irqchip improvements from tglx:s tree - Qualcomm IPQ806x and IPQ9650 non-urgent pin grop fixups - The NPCM8xx driver has been put into shape fixing many pin and group definitions - Some non-urgent Tegra 264 pin assignments are fixed up - Some non-urgent fixups to Airoha AN7581 and AN7583 registers and pin assignments, missing features etc" * tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (130 commits) dt-bindings: pinctrl: Convert TI DA850 pupd to DT schema pinctrl: meson: sync some modify from A4 pinctrl: meson: a4: Add input enable pin configuration pinctrl: realtek: rtd1625: remove unused group name spdif_sel pinctrl: realtek: rtd1625: fix base_bit for VE4 GPIO 13 dt-bindings: pinctrl: microchip,pic32mzda-pinctrl: Convert to DT schema Revert "Merge branch 'ib-rsk7204' into devel" pinctrl: rockchip: Add RV1106 pinctrl support dt-bindings: pinctrl: rockchip: Add RV1106 compatible pinctrl: rockchip: Decode drive strength in the get function pinctrl: fix PINCTRL_GENERIC_MUX not always being selectable pinctrl: airoha: add support of an7563 SoC dt-bindings: pinctrl: airoha: add support of an7563 pin controller pinctrl: airoha: try to find chip scu node by phandle first pinctrl: airoha: add support of en7523 SoC dt-bindings: pinctrl: airoha: add support of en7523 pin controller pinctrl: airoha: an7583: add support for olt pinmux pinctrl: airoha: an7583: add support for pon_alt pinmux pinctrl: airoha: an7583: add support for npu_uart pinmux dt-bindings: pinctrl: airoha: an7583: add missed features ... --- tools/testing/memblock/README | 115 ++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 115 insertions(+) create mode 100644 tools/testing/memblock/README (limited to 'tools/testing/memblock/README') diff --git a/tools/testing/memblock/README b/tools/testing/memblock/README new file mode 100644 index 000000000..b435f48d8 --- /dev/null +++ b/tools/testing/memblock/README @@ -0,0 +1,115 @@ +================== +Memblock simulator +================== + +Introduction +============ + +Memblock is a boot time memory allocator[1] that manages memory regions before +the actual memory management is initialized. Its APIs allow to register physical +memory regions, mark them as available or reserved, allocate a block of memory +within the requested range and/or in specific NUMA node, and many more. + +Because it is used so early in the booting process, testing and debugging it is +difficult. This test suite, usually referred as memblock simulator, is +an attempt at testing the memblock mechanism. It runs one monolithic test that +consist of a series of checks that exercise both the basic operations and +allocation functionalities of memblock. The main data structure of the boot time +memory allocator is initialized at the build time, so the checks here reuse its +instance throughout the duration of the test. To ensure that tests don't affect +each other, region arrays are reset in between. + +As this project uses the actual memblock code and has to run in user space, +some of the kernel definitions were stubbed by the initial commit that +introduced memblock simulator (commit 16802e55dea9 ("memblock tests: Add +skeleton of the memblock simulator")) and a few preparation commits just +before it. Most of them don't match the kernel implementation, so one should +consult them first before making any significant changes to the project. + +Usage +===== + +To run the tests, build the main target and run it: + +$ make && ./main + +A successful run produces no output. It is possible to control the behavior +by passing options from command line. For example, to include verbose output, +append the `-v` options when you run the tests: + +$ ./main -v + +This will print information about which functions are being tested and the +number of test cases that passed. + +For the full list of options from command line, see `./main --help`. + +It is also possible to override different configuration parameters to change +the test functions. For example, to simulate enabled NUMA, use: + +$ make NUMA=1 + +For the full list of build options, see `make help`. + +Project structure +================= + +The project has one target, main, which calls a group of checks for basic and +allocation functions. Tests for each group are defined in dedicated files, as it +can be seen here: + +memblock +|-- asm ------------------, +|-- lib |-- implement function and struct stubs +|-- linux ------------------' +|-- scripts +| |-- Makefile.include -- handles `make` parameters +|-- tests +| |-- alloc_api.(c|h) -- memblock_alloc tests +| |-- alloc_helpers_api.(c|h) -- memblock_alloc_from tests +| |-- alloc_nid_api.(c|h) -- memblock_alloc_try_nid tests +| |-- basic_api.(c|h) -- memblock_add/memblock_reserve/... tests +| |-- common.(c|h) -- helper functions for resetting memblock; +|-- main.c --------------. dummy physical memory definition +|-- Makefile `- test runner +|-- README +|-- TODO +|-- .gitignore + +Simulating physical memory +========================== + +Some allocation functions clear the memory in the process, so it is required for +memblock to track valid memory ranges. To achieve this, the test suite registers +with memblock memory stored by test_memory struct. It is a small wrapper that +points to a block of memory allocated via malloc. For each group of allocation +tests, dummy physical memory is allocated, added to memblock, and then released +at the end of the test run. The structure of a test runner checking allocation +functions is as follows: + +int memblock_alloc_foo_checks(void) +{ + reset_memblock_attributes(); /* data structure reset */ + dummy_physical_memory_init(); /* allocate and register memory */ + + (...allocation checks...) + + dummy_physical_memory_cleanup(); /* free the memory */ +} + +There's no need to explicitly free the dummy memory from memblock via +memblock_free() call. The entry will be erased by reset_memblock_regions(), +called at the beginning of each test. + +Known issues +============ + +1. Tests for memblock_alloc_low() can't be easily implemented. The function uses + ARCH_LOW_ADDRESS_LIMIT marco, which can't be changed to point at the low + memory of the memory_block. + +References +========== + +1. Boot time memory management documentation page: + https://www.kernel.org/doc/html/latest/core-api/boot-time-mm.html -- cgit v1.3.1