From cf9610f9116d55c5a66ef9f1faecacabd93a9322 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Mon, 24 Aug 2026 08:46:03 -0700 Subject: Merge tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control updates from Linus Walleij: "Core changes: - Use the non-blocking mux_state_try_select() in the generic MUX pin control back-end - Free pin maps on pinctrl_generic_to_map() failure in the core helpers New hardware pin control: - Qualcomm Maili TLMM SoC, PMG1110 PMIC, and Eliza LPASS LPI TLMM SoC (this is for the low power audio, LPASS = Low Power Audio SubSystem portions) - Upboard support on top of the Intel pin controller - Apple T6030 and T6031 support (just compatible strings) - Samsung Exynos 8855 SoC - Mediatek MT6858 SoC - Rockchip RK3308B and RV1106 SoCs - Airoha EN7523 and AN7563 SoCs Improvements: - Qualcomm TLMM GPIOs are unconditionally marked as wakeup capable - Qualcomm improvements on top of the Qualcomm PDC (power domain controller) irqchip improvements from tglx:s tree - Qualcomm IPQ806x and IPQ9650 non-urgent pin grop fixups - The NPCM8xx driver has been put into shape fixing many pin and group definitions - Some non-urgent Tegra 264 pin assignments are fixed up - Some non-urgent fixups to Airoha AN7581 and AN7583 registers and pin assignments, missing features etc" * tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (130 commits) dt-bindings: pinctrl: Convert TI DA850 pupd to DT schema pinctrl: meson: sync some modify from A4 pinctrl: meson: a4: Add input enable pin configuration pinctrl: realtek: rtd1625: remove unused group name spdif_sel pinctrl: realtek: rtd1625: fix base_bit for VE4 GPIO 13 dt-bindings: pinctrl: microchip,pic32mzda-pinctrl: Convert to DT schema Revert "Merge branch 'ib-rsk7204' into devel" pinctrl: rockchip: Add RV1106 pinctrl support dt-bindings: pinctrl: rockchip: Add RV1106 compatible pinctrl: rockchip: Decode drive strength in the get function pinctrl: fix PINCTRL_GENERIC_MUX not always being selectable pinctrl: airoha: add support of an7563 SoC dt-bindings: pinctrl: airoha: add support of an7563 pin controller pinctrl: airoha: try to find chip scu node by phandle first pinctrl: airoha: add support of en7523 SoC dt-bindings: pinctrl: airoha: add support of en7523 pin controller pinctrl: airoha: an7583: add support for olt pinmux pinctrl: airoha: an7583: add support for pon_alt pinmux pinctrl: airoha: an7583: add support for npu_uart pinmux dt-bindings: pinctrl: airoha: an7583: add missed features ... --- tools/perf/util/zstd.c | 152 +++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 152 insertions(+) create mode 100644 tools/perf/util/zstd.c (limited to 'tools/perf/util/zstd.c') diff --git a/tools/perf/util/zstd.c b/tools/perf/util/zstd.c new file mode 100644 index 000000000..d98014902 --- /dev/null +++ b/tools/perf/util/zstd.c @@ -0,0 +1,152 @@ +// SPDX-License-Identifier: GPL-2.0 + +#include +#include + +#include "util/compress.h" +#include "util/debug.h" + +int zstd_init(struct zstd_data *data, int level) +{ + data->comp_level = level; + data->dstream = NULL; + data->cstream = NULL; + return 0; +} + +int zstd_fini(struct zstd_data *data) +{ + if (data->dstream) { + ZSTD_freeDStream(data->dstream); + data->dstream = NULL; + } + + if (data->cstream) { + ZSTD_freeCStream(data->cstream); + data->cstream = NULL; + } + + return 0; +} + +ssize_t zstd_compress_stream_to_records(struct zstd_data *data, void *dst, size_t dst_size, + void *src, size_t src_size, size_t max_record_size, + ssize_t process_header(void *record, size_t dst_size, + size_t data_size)) +{ + size_t ret, compressed = 0; + ssize_t size; + ZSTD_inBuffer input = { src, src_size, 0 }; + ZSTD_outBuffer output; + void *record; + + if (!data->cstream) { + data->cstream = ZSTD_createCStream(); + if (data->cstream == NULL) { + pr_err("Couldn't create compression stream.\n"); + return -1; + } + + ret = ZSTD_initCStream(data->cstream, data->comp_level); + if (ZSTD_isError(ret)) { + pr_err("Failed to initialize compression stream: %s\n", + ZSTD_getErrorName(ret)); + return -1; + } + } + + while (input.pos < input.size) { + record = dst; + size = process_header(record, dst_size, 0); + /* Output buffer full — cannot fit even the record header */ + if (size < 0) + goto reset; + compressed += size; + dst += size; + dst_size -= size; + output = (ZSTD_outBuffer){ dst, (dst_size > max_record_size) ? + max_record_size : dst_size, 0 }; + ret = ZSTD_compressStream(data->cstream, &output, &input); + ZSTD_flushStream(data->cstream, &output); + if (ZSTD_isError(ret)) { + pr_err("failed to compress %ld bytes: %s\n", + (long)src_size, ZSTD_getErrorName(ret)); + goto reset; + } + compressed += output.pos; + dst += output.pos; + dst_size -= output.pos; + /* + * No progress: ZSTD couldn't emit any bytes into the + * remaining output buffer. Calling process_header + * with output.pos=0 would re-trigger header initialization, + * double-subtracting the header size from dst_size and + * underflowing the unsigned counter. + */ + if (output.pos == 0) + goto reset; + size = process_header(record, dst_size, output.pos); + if (size < 0) + goto reset; + compressed += size; + dst += size; + dst_size -= size; + } + + return compressed; + +reset: + /* Reset so the context is usable if the caller retries */ + ret = ZSTD_initCStream(data->cstream, data->comp_level); + if (ZSTD_isError(ret)) + pr_err("failed to reset compression context: %s\n", + ZSTD_getErrorName(ret)); + return -1; +} + +size_t zstd_decompress_stream(struct zstd_data *data, void *src, size_t src_size, + void *dst, size_t dst_size) +{ + size_t ret; + ZSTD_inBuffer input = { src, src_size, 0 }; + ZSTD_outBuffer output = { dst, dst_size, 0 }; + + if (!data->dstream) { + data->dstream = ZSTD_createDStream(); + if (data->dstream == NULL) { + pr_err("Couldn't create decompression stream.\n"); + return 0; + } + + ret = ZSTD_initDStream(data->dstream); + if (ZSTD_isError(ret)) { + pr_err("Failed to initialize decompression stream: %s\n", + ZSTD_getErrorName(ret)); + return 0; + } + } + while (input.pos < input.size) { + size_t prev_in = input.pos; + size_t prev_out = output.pos; + + ret = ZSTD_decompressStream(data->dstream, &output, &input); + if (ZSTD_isError(ret)) { + pr_err("failed to decompress (B): %zd -> %zd, dst_size %zd : %s\n", + src_size, output.pos, dst_size, ZSTD_getErrorName(ret)); + return 0; + } + /* + * Neither stream advanced — decompression is stuck. + * Return 0 (error) rather than partial output: perf + * uses ZSTD_flushStream (not ZSTD_endStream), so the + * stream is continuous across compressed events. + * Discarding unconsumed input would desynchronize the + * decompressor, causing the next call to produce + * garbage that could be misinterpreted as valid events. + */ + if (input.pos == prev_in && output.pos == prev_out) + return 0; + } + + return output.pos; +} -- cgit v1.3.1