From e1c13aed4a1641550e8c9518c96f016e1d52d09b Mon Sep 17 00:00:00 2001
From: Yijie Yang <yijie.yang@oss.qualcomm.com>
Date: Tue, 11 Aug 2026 16:46:47 +0800
Subject: dt-bindings: interconnect: qcom-bwmon: Add Maili cpu-bwmon compatible

Add the Qualcomm Maili SoC compatible string for the CPU bandwidth
monitor (BWMONv4). This falls back to the sdm845-bwmon compatible,
consistent with the existing pattern used by other recent SoCs such as
sm8750 and kaanapali.

Signed-off-by: Yijie Yang <yijie.yang@oss.qualcomm.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: Jingyi Wang <jingyi.wang@oss.qualcomm.com>
Link: https://patch.msgid.link/20260811-bwmon-v2-1-80f7f150ab9e@oss.qualcomm.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
---
 tools/perf/Documentation/perf-script.txt | 548 +++++++++++++++++++++++++++++++
 1 file changed, 548 insertions(+)
 create mode 100644 tools/perf/Documentation/perf-script.txt

(limited to 'tools/perf/Documentation/perf-script.txt')

diff --git a/tools/perf/Documentation/perf-script.txt b/tools/perf/Documentation/perf-script.txt
new file mode 100644
index 000000000..200ea2589
--- /dev/null
+++ b/tools/perf/Documentation/perf-script.txt
@@ -0,0 +1,548 @@
+perf-script(1)
+=============
+
+NAME
+----
+perf-script - Read perf.data (created by perf record) and display trace output
+
+SYNOPSIS
+--------
+[verse]
+'perf script' [<options>]
+'perf script' [<options>] record <script> [<record-options>] <command>
+'perf script' [<options>] report <script> [script-args]
+'perf script' [<options>] <script> <required-script-args> [<record-options>] <command>
+'perf script' [<options>] <top-script> [script-args]
+
+DESCRIPTION
+-----------
+This command reads the input file and displays the trace recorded.
+
+There are several variants of perf script:
+
+  'perf script' to see a detailed trace of the workload that was
+  recorded.
+
+  You can also run a set of pre-canned scripts that aggregate and
+  summarize the raw trace data in various ways (the list of scripts is
+  available via 'perf script -l').  The following variants allow you to
+  record and run those scripts:
+
+  'perf script record <script> <command>' to record the events required
+  for 'perf script report'.  <script> is the name displayed in the
+  output of 'perf script --list' i.e. the actual script name minus any
+  language extension.  If <command> is not specified, the events are
+  recorded using the -a (system-wide) 'perf record' option.
+
+  'perf script report <script> [args]' to run and display the results
+  of <script>.  <script> is the name displayed in the output of 'perf
+  script --list' i.e. the actual script name minus any language
+  extension.  The perf.data output from a previous run of 'perf script
+  record <script>' is used and should be present for this command to
+  succeed.  [args] refers to the (mainly optional) args expected by
+  the script.
+
+  'perf script <script> <required-script-args> <command>' to both
+  record the events required for <script> and to run the <script>
+  using 'live-mode' i.e. without writing anything to disk.  <script>
+  is the name displayed in the output of 'perf script --list' i.e. the
+  actual script name minus any language extension.  If <command> is
+  not specified, the events are recorded using the -a (system-wide)
+  'perf record' option.  If <script> has any required args, they
+  should be specified before <command>.  This mode doesn't allow for
+  optional script args to be specified; if optional script args are
+  desired, they can be specified using separate 'perf script record'
+  and 'perf script report' commands, with the stdout of the record step
+  piped to the stdin of the report script, using the '-o -' and '-i -'
+  options of the corresponding commands.
+
+  'perf script <top-script>' to both record the events required for
+  <top-script> and to run the <top-script> using 'live-mode'
+  i.e. without writing anything to disk.  <top-script> is the name
+  displayed in the output of 'perf script --list' i.e. the actual
+  script name minus any language extension; a <top-script> is defined
+  as any script name ending with the string 'top'.
+
+  [<record-options>] can be passed to the record steps of 'perf script
+  record' and 'live-mode' variants; this isn't possible however for
+  <top-script> 'live-mode' or 'perf script report' variants.
+
+  See the 'SEE ALSO' section for links to language-specific
+  information on how to write and run your own trace scripts.
+
+OPTIONS
+-------
+<command>...::
+	Any command you can specify in a shell.
+
+-D::
+--dump-raw-trace=::
+        Display verbose dump of the trace data.
+
+--dump-unsorted-raw-trace=::
+        Same as --dump-raw-trace but not sorted in time order.
+
+-L::
+--Latency=::
+        Show latency attributes (irqs/preemption disabled, etc).
+
+-l::
+--list=::
+        Display a list of available trace scripts.
+
+-s ['lang']::
+--script=::
+        Process trace data with the given script ([lang]:script[.ext]).
+	If the string 'lang' is specified in place of a script name, a
+        list of supported languages will be displayed instead.
+
+-g::
+--gen-script=::
+	Generate a starter script. If a language is given then the
+        script is named perf-script.[ext] according to the
+        language. If a file path is given then python is used for
+        files ending '.py' and perl used for files ending '.pl'.
+
+--dlfilter=<file>::
+	Filter sample events using the given shared object file.
+	Refer linkperf:perf-dlfilter[1]
+
+--dlarg=<arg>::
+	Pass 'arg' as an argument to the dlfilter. --dlarg may be repeated
+	to add more arguments.
+
+--list-dlfilters::
+        Display a list of available dlfilters. Use with option -v (must come
+        before option --list-dlfilters) to show long descriptions.
+
+-a::
+        Force system-wide collection.  Scripts run without a <command>
+        normally use -a by default, while scripts run with a <command>
+        normally don't - this option allows the latter to be run in
+        system-wide mode.
+
+-i::
+--input=::
+        Input file name. (default: perf.data unless stdin is a fifo)
+
+-d::
+--debug-mode::
+        Do various checks like samples ordering and lost events.
+
+-F::
+--fields::
+        Comma separated list of fields to print. Options are:
+        comm, tid, pid, time, cpu, event, trace, ip, sym, dso, dsoff, addr, symoff,
+        srcline, period, iregs, uregs, brstack, brstacksym, flags, bpf-output,
+        brstackinsn, brstackinsnlen, brstackdisasm, brstackoff, callindent, insn, disasm,
+        insnlen, synth, phys_addr, metric, misc, srccode, ipc, data_page_size,
+        code_page_size, ins_lat, machine_pid, vcpu, cgroup, retire_lat, brcntr,
+
+        Field list can be prepended with the type, trace, sw or hw,
+        to indicate to which event type the field list applies.
+        e.g., -F sw:comm,tid,time,ip,sym  and -F trace:time,cpu,trace
+
+		perf script -F <fields>
+
+	is equivalent to:
+
+		perf script -F trace:<fields> -F sw:<fields> -F hw:<fields>
+
+	i.e., the specified fields apply to all event types if the type string
+	is not given.
+
+	In addition to overriding fields, it is also possible to add or remove
+	fields from the defaults. For example
+
+		-F -cpu,+insn
+
+	removes the cpu field and adds the insn field. Adding/removing fields
+	cannot be mixed with normal overriding.
+
+	The arguments are processed in the order received. A later usage can
+	reset a prior request. e.g.:
+
+		-F trace: -F comm,tid,time,ip,sym
+
+	The first -F suppresses trace events (field list is ""), but then the
+	second invocation sets the fields to comm,tid,time,ip,sym. In this case a
+	warning is given to the user:
+
+		"Overriding previous field request for all events."
+
+	Alternatively, consider the order:
+
+		-F comm,tid,time,ip,sym -F trace:
+
+	The first -F sets the fields for all events and the second -F
+	suppresses trace events. The user is given a warning message about
+	the override, and the result of the above is that only S/W and H/W
+	events are displayed with the given fields.
+
+	It's possible tp add/remove fields only for specific event type:
+
+		-Fsw:-cpu,-period
+
+	removes cpu and period from software events.
+
+	For the 'wildcard' option if a user selected field is invalid for an
+	event type, a message is displayed to the user that the option is
+	ignored for that type. For example:
+
+		$ perf script -F comm,tid,trace
+		'trace' not valid for hardware events. Ignoring.
+		'trace' not valid for software events. Ignoring.
+
+	Alternatively, if the type is given an invalid field is specified it
+	is an error. For example:
+
+        perf script -v -F sw:comm,tid,trace
+        'trace' not valid for software events.
+
+	At this point usage is displayed, and perf-script exits.
+
+	The flags field is synthesized and may have a value when Instruction
+	Trace decoding. The flags are "bcrosyiABExghDt" which stand for branch,
+	call, return, conditional, system, asynchronous, interrupt,
+	transaction abort, trace begin, trace end, in transaction, VM-Entry,
+	VM-Exit, interrupt disabled and interrupt disable toggle respectively.
+	Known combinations of flags are printed more nicely e.g.
+	"call" for "bc", "return" for "br", "jcc" for "bo", "jmp" for "b",
+	"int" for "bci", "iret" for "bri", "syscall" for "bcs", "sysret" for "brs",
+	"async" for "by", "hw int" for "bcyi", "tx abrt" for "bA", "tr strt" for "bB",
+	"tr end" for "bE", "vmentry" for "bcg", "vmexit" for "bch".
+	However the "x", "D" and "t" flags will be displayed separately in those
+	cases e.g. "jcc     (xD)" for a condition branch within a transaction
+	with interrupts disabled. Note, interrupts becoming disabled is "t",
+	whereas interrupts becoming enabled is "Dt".
+
+	The callindent field is synthesized and may have a value when
+	Instruction Trace decoding. For calls and returns, it will display the
+	name of the symbol indented with spaces to reflect the stack depth.
+
+	When doing instruction trace decoding, insn, disasm and insnlen give the
+	instruction bytes, disassembled instructions (requires libcapstone support)
+	and the instruction length of the current instruction respectively.
+
+	The synth field is used by synthesized events which may be created when
+	Instruction Trace decoding.
+
+	The ipc (instructions per cycle) field is synthesized and may have a value when
+	Instruction Trace decoding.
+
+	The machine_pid and vcpu fields are derived from data resulting from using
+	perf inject to insert a perf.data file recorded inside a virtual machine into
+	a perf.data file recorded on the host at the same time.
+
+	The cgroup fields requires sample having the cgroup id which is saved
+	when "--all-cgroups" option is passed to 'perf record'.
+
+	Finally, a user may not set fields to none for all event types.
+	i.e., -F "" is not allowed.
+
+	The brstack output includes branch related information with raw addresses using the
+	FROM/TO/EVENT/INTX/ABORT/CYCLES/TYPE/SPEC syntax in the following order:
+	FROM  : branch source instruction
+	TO    : branch target instruction
+	EVENT : M=branch target or direction was mispredicted
+	        P=branch target or direction was predicted
+	        N=branch not-taken
+	        -=no event or not supported
+	INTX  : X=branch inside a transactional region
+	        -=branch not in transaction region or not supported
+	ABORT : A=TSX abort entry
+	        -=not aborted region or not supported
+	CYCLES: the number of cycles that have elapsed since the last branch was recorded
+	TYPE  : branch type: COND/UNCOND/IND/CALL/IND_CALL/RET etc.
+	        -=not supported
+	SPEC  : branch speculation info: SPEC_WRONG_PATH/NON_SPEC_CORRECT_PATH/SPEC_CORRECT_PATH
+	        -=not supported
+
+	The brstacksym is identical to brstack, except that the FROM and TO addresses are printed in a symbolic form if possible.
+
+	When brstackinsn is specified the full assembler sequences of branch sequences for each sample
+	is printed. This is the full execution path leading to the sample. This is only supported when the
+	sample was recorded with perf record -b or -j any.
+
+	Use brstackinsnlen to print the brstackinsn lenght. For example, you
+	can’t know the next sequential instruction after an unconditional branch unless
+	you calculate that based on its length.
+
+	brstackdisasm acts like brstackinsn, but will print disassembled instructions if
+	perf is built with the capstone library.
+
+	The brstackoff field will print an offset into a specific dso/binary.
+
+	With the metric option perf script can compute metrics for
+	sampling periods, similar to perf stat. This requires
+	specifying a group with multiple events defining metrics with the :S option
+	for perf record. perf will sample on the first event, and
+	print computed metrics for all the events in the group. Please note
+	that the metric computed is averaged over the whole sampling
+	period (since the last sample), not just for the sample point.
+
+	For sample events it's possible to display misc field with -F +misc option,
+	following letters are displayed for each bit:
+
+	  PERF_RECORD_MISC_KERNEL               K
+	  PERF_RECORD_MISC_USER                 U
+	  PERF_RECORD_MISC_HYPERVISOR           H
+	  PERF_RECORD_MISC_GUEST_KERNEL         G
+	  PERF_RECORD_MISC_GUEST_USER           g
+	  PERF_RECORD_MISC_MMAP_DATA*           M
+	  PERF_RECORD_MISC_COMM_EXEC            E
+	  PERF_RECORD_MISC_SWITCH_OUT           S
+	  PERF_RECORD_MISC_SWITCH_OUT_PREEMPT   Sp
+
+	  $ perf script -F +misc ...
+	   sched-messaging  1414 K     28690.636582:       4590 cycles ...
+	   sched-messaging  1407 U     28690.636600:     325620 cycles ...
+	   sched-messaging  1414 K     28690.636608:      19473 cycles ...
+	  misc field ___________/
+
+-k::
+--vmlinux=<file>::
+        vmlinux pathname
+
+--kallsyms=<file>::
+        kallsyms pathname
+
+--symfs=<directory[,layout]>::
+        Look for files with symbols relative to this directory. The optional
+        layout can be 'hierarchy' (default, matches full path) or 'flat'
+        (only matches base name). This is useful when debug files are stored
+        in a flat directory structure.
+
+-G::
+--hide-call-graph::
+        When printing symbols do not display call chain.
+
+--stop-bt::
+        Stop display of callgraph at these symbols
+
+-C::
+--cpu:: Only report samples for the list of CPUs provided. Multiple CPUs can
+	be provided as a comma-separated list with no space: 0,1. Ranges of
+	CPUs are specified with -: 0-2. Default is to report samples on all
+	CPUs.
+
+-c::
+--comms=::
+	Only display events for these comms. CSV that understands
+	file://filename entries.
+
+--pid=::
+	Only show events for given process ID (comma separated list).
+
+--tid=::
+	Only show events for given thread ID (comma separated list).
+
+-I::
+--show-info::
+	Display extended information about the perf.data file. This adds
+	information which may be very large and thus may clutter the display.
+	It currently includes: cpu and numa topology of the host system.
+	It can only be used with the perf script report mode.
+
+--show-kernel-path::
+	Try to resolve the path of [kernel.kallsyms]
+
+--show-task-events
+	Display task related events (e.g. FORK, COMM, EXIT).
+
+--show-mmap-events
+	Display mmap related events (e.g. MMAP, MMAP2).
+
+--show-namespace-events
+	Display namespace events i.e. events of type PERF_RECORD_NAMESPACES.
+
+--show-switch-events
+	Display context switch events i.e. events of type PERF_RECORD_SWITCH or
+	PERF_RECORD_SWITCH_CPU_WIDE.
+
+--show-lost-events
+	Display lost events i.e. events of type PERF_RECORD_LOST.
+
+--show-round-events
+	Display finished round events i.e. events of type PERF_RECORD_FINISHED_ROUND.
+
+--show-bpf-events
+	Display bpf events i.e. events of type PERF_RECORD_KSYMBOL and PERF_RECORD_BPF_EVENT.
+
+--show-cgroup-events
+	Display cgroup events i.e. events of type PERF_RECORD_CGROUP.
+
+--show-text-poke-events
+	Display text poke events i.e. events of type PERF_RECORD_TEXT_POKE and
+	PERF_RECORD_KSYMBOL.
+
+--demangle::
+	Demangle symbol names to human readable form. It's enabled by default,
+	disable with --no-demangle.
+
+--demangle-kernel::
+	Demangle kernel symbol names to human readable form (for C++ kernels).
+
+--addr2line=<path>::
+	Path to addr2line binary.
+
+--header
+	Show perf.data header.
+
+--header-only
+	Show only perf.data header.
+
+--itrace::
+	Options for decoding instruction tracing data. The options are:
+
+include::itrace.txt[]
+
+	To disable decoding entirely, use --no-itrace.
+
+--full-source-path::
+	Show the full path for source files for srcline output.
+
+--max-stack::
+        Set the stack depth limit when parsing the callchain, anything
+        beyond the specified depth will be ignored. This is a trade-off
+        between information loss and faster processing especially for
+        workloads that can have a very long callchain stack.
+        Note that when using the --itrace option the synthesized callchain size
+        will override this value if the synthesized callchain size is bigger.
+
+        Default: 127
+
+--ns::
+	Use 9 decimal places when displaying time (i.e. show the nanoseconds)
+
+-f::
+--force::
+	Don't do ownership validation.
+
+--time::
+	Only analyze samples within given time window: <start>,<stop>. Times
+	have the format seconds.nanoseconds. If start is not given (i.e. time
+	string is ',x.y') then analysis starts at the beginning of the file. If
+	stop time is not given (i.e. time string is 'x.y,') then analysis goes
+	to end of file. Multiple ranges can be separated by spaces, which
+	requires the argument to be quoted e.g. --time "1234.567,1234.789 1235,"
+
+	Also support time percent with multiple time ranges. Time string is
+	'a%/n,b%/m,...' or 'a%-b%,c%-%d,...'.
+
+	For example:
+	Select the second 10% time slice:
+	perf script --time 10%/2
+
+	Select from 0% to 10% time slice:
+	perf script --time 0%-10%
+
+	Select the first and second 10% time slices:
+	perf script --time 10%/1,10%/2
+
+	Select from 0% to 10% and 30% to 40% slices:
+	perf script --time 0%-10%,30%-40%
+
+--max-blocks::
+	Set the maximum number of program blocks to print with brstackinsn for
+	each sample.
+
+--reltime::
+	Print time stamps relative to trace start.
+
+--deltatime::
+	Print time stamps relative to previous event.
+
+--per-event-dump::
+	Create per event files with a "perf.data.EVENT.dump" name instead of
+        printing to stdout, useful, for instance, for generating flamegraphs.
+
+--inline::
+	If a callgraph address belongs to an inlined function, the inline stack
+	will be printed. Each entry has function name and file/line. Enabled by
+	default, disable with --no-inline.
+
+--insn-trace[=<raw|disasm>]::
+	Show instruction stream in bytes (raw) or disassembled (disasm)
+	for intel_pt traces. The default is 'raw'. To use xed, combine
+	'raw' with --xed to show disassembly done by xed.
+
+--xed::
+	Run xed disassembler on output. Requires installing the xed disassembler.
+
+-S::
+--symbols=symbol[,symbol...]::
+	Only consider the listed symbols. Symbols are typically a name
+	but they may also be hexadecimal address.
+
+	The hexadecimal address may be the start address of a symbol or
+	any other address to filter the trace records
+
+	For example, to select the symbol noploop or the address 0x4007a0:
+	perf script --symbols=noploop,0x4007a0
+
+	Support filtering trace records by symbol name, start address of
+	symbol, any hexadecimal address and address range.
+
+	The comparison order is:
+
+	1. symbol name comparison
+	2. symbol start address comparison.
+	3. any hexadecimal address comparison.
+	4. address range comparison (see --addr-range).
+
+--addr-range::
+       Use with -S or --symbols to list traced records within address range.
+
+       For example, to list the traced records within the address range
+       [0x4007a0, 0x0x4007a9]:
+       perf script -S 0x4007a0 --addr-range 10
+
+--dsos=::
+	Only consider symbols in these DSOs.
+
+--call-trace::
+	Show call stream for intel_pt traces. The CPUs are interleaved, but
+	can be filtered with -C.
+
+--call-ret-trace::
+	Show call and return stream for intel_pt traces.
+
+--graph-function::
+	For itrace only show specified functions and their callees for
+	itrace. Multiple functions can be separated by comma.
+
+--switch-on EVENT_NAME::
+	Only consider events after this event is found.
+
+--switch-off EVENT_NAME::
+	Stop considering events after this event is found.
+
+--show-on-off-events::
+	Show the --switch-on/off events too.
+
+--stitch-lbr::
+	Show callgraph with stitched LBRs, which may have more complete
+	callgraph. The perf.data file must have been obtained using
+	perf record --call-graph lbr.
+	Disabled by default. In common cases with call stack overflows,
+	it can recreate better call stacks than the default lbr call stack
+	output. But this approach is not foolproof. There can be cases
+	where it creates incorrect call stacks from incorrect matches.
+	The known limitations include exception handing such as
+	setjmp/longjmp will have calls/returns not match.
+
+--merge-callchains::
+	Enable merging deferred user callchains if available.  This is the
+	default behavior.  If you want to see separate CALLCHAIN_DEFERRED
+	records for some reason, use --no-merge-callchains explicitly.
+
+:GMEXAMPLECMD: script
+:GMEXAMPLESUBCMD:
+include::guest-files.txt[]
+
+SEE ALSO
+--------
+linkperf:perf-record[1], linkperf:perf-script-perl[1],
+linkperf:perf-script-python[1], linkperf:perf-intel-pt[1],
+linkperf:perf-dlfilter[1]
-- 
cgit v1.3.1