From cf9610f9116d55c5a66ef9f1faecacabd93a9322 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Mon, 24 Aug 2026 08:46:03 -0700 Subject: Merge tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control updates from Linus Walleij: "Core changes: - Use the non-blocking mux_state_try_select() in the generic MUX pin control back-end - Free pin maps on pinctrl_generic_to_map() failure in the core helpers New hardware pin control: - Qualcomm Maili TLMM SoC, PMG1110 PMIC, and Eliza LPASS LPI TLMM SoC (this is for the low power audio, LPASS = Low Power Audio SubSystem portions) - Upboard support on top of the Intel pin controller - Apple T6030 and T6031 support (just compatible strings) - Samsung Exynos 8855 SoC - Mediatek MT6858 SoC - Rockchip RK3308B and RV1106 SoCs - Airoha EN7523 and AN7563 SoCs Improvements: - Qualcomm TLMM GPIOs are unconditionally marked as wakeup capable - Qualcomm improvements on top of the Qualcomm PDC (power domain controller) irqchip improvements from tglx:s tree - Qualcomm IPQ806x and IPQ9650 non-urgent pin grop fixups - The NPCM8xx driver has been put into shape fixing many pin and group definitions - Some non-urgent Tegra 264 pin assignments are fixed up - Some non-urgent fixups to Airoha AN7581 and AN7583 registers and pin assignments, missing features etc" * tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (130 commits) dt-bindings: pinctrl: Convert TI DA850 pupd to DT schema pinctrl: meson: sync some modify from A4 pinctrl: meson: a4: Add input enable pin configuration pinctrl: realtek: rtd1625: remove unused group name spdif_sel pinctrl: realtek: rtd1625: fix base_bit for VE4 GPIO 13 dt-bindings: pinctrl: microchip,pic32mzda-pinctrl: Convert to DT schema Revert "Merge branch 'ib-rsk7204' into devel" pinctrl: rockchip: Add RV1106 pinctrl support dt-bindings: pinctrl: rockchip: Add RV1106 compatible pinctrl: rockchip: Decode drive strength in the get function pinctrl: fix PINCTRL_GENERIC_MUX not always being selectable pinctrl: airoha: add support of an7563 SoC dt-bindings: pinctrl: airoha: add support of an7563 pin controller pinctrl: airoha: try to find chip scu node by phandle first pinctrl: airoha: add support of en7523 SoC dt-bindings: pinctrl: airoha: add support of en7523 pin controller pinctrl: airoha: an7583: add support for olt pinmux pinctrl: airoha: an7583: add support for pon_alt pinmux pinctrl: airoha: an7583: add support for npu_uart pinmux dt-bindings: pinctrl: airoha: an7583: add missed features ... --- sound/soc/codecs/rt286.h | 200 +++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 200 insertions(+) create mode 100644 sound/soc/codecs/rt286.h (limited to 'sound/soc/codecs/rt286.h') diff --git a/sound/soc/codecs/rt286.h b/sound/soc/codecs/rt286.h new file mode 100644 index 000000000..4b7a3bd60 --- /dev/null +++ b/sound/soc/codecs/rt286.h @@ -0,0 +1,200 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * rt286.h -- RT286 ALSA SoC audio driver + * + * Copyright 2011 Realtek Microelectronics + * Author: Johnny Hsu + */ + +#ifndef __RT286_H__ +#define __RT286_H__ + +#define VERB_CMD(V, N, D) ((N << 20) | (V << 8) | D) + +#define RT286_AUDIO_FUNCTION_GROUP 0x01 +#define RT286_DAC_OUT1 0x02 +#define RT286_DAC_OUT2 0x03 +#define RT286_ADC_IN1 0x09 +#define RT286_ADC_IN2 0x08 +#define RT286_MIXER_IN 0x0b +#define RT286_MIXER_OUT1 0x0c +#define RT286_MIXER_OUT2 0x0d +#define RT286_DMIC1 0x12 +#define RT286_DMIC2 0x13 +#define RT286_SPK_OUT 0x14 +#define RT286_MIC1 0x18 +#define RT286_LINE1 0x1a +#define RT286_BEEP 0x1d +#define RT286_SPDIF 0x1e +#define RT286_VENDOR_REGISTERS 0x20 +#define RT286_HP_OUT 0x21 +#define RT286_MIXER_IN1 0x22 +#define RT286_MIXER_IN2 0x23 + +#define RT286_SET_PIN_SFT 6 +#define RT286_SET_PIN_ENABLE 0x40 +#define RT286_SET_PIN_DISABLE 0 +#define RT286_SET_EAPD_HIGH 0x2 +#define RT286_SET_EAPD_LOW 0 + +#define RT286_MUTE_SFT 7 + +/* Verb commands */ +#define RT286_GET_PARAM(NID, PARAM) VERB_CMD(AC_VERB_PARAMETERS, NID, PARAM) +#define RT286_SET_POWER(NID) VERB_CMD(AC_VERB_SET_POWER_STATE, NID, 0) +#define RT286_SET_AUDIO_POWER RT286_SET_POWER(RT286_AUDIO_FUNCTION_GROUP) +#define RT286_SET_HPO_POWER RT286_SET_POWER(RT286_HP_OUT) +#define RT286_SET_SPK_POWER RT286_SET_POWER(RT286_SPK_OUT) +#define RT286_SET_DMIC1_POWER RT286_SET_POWER(RT286_DMIC1) +#define RT286_SPK_MUX\ + VERB_CMD(AC_VERB_SET_CONNECT_SEL, RT286_SPK_OUT, 0) +#define RT286_HPO_MUX\ + VERB_CMD(AC_VERB_SET_CONNECT_SEL, RT286_HP_OUT, 0) +#define RT286_ADC0_MUX\ + VERB_CMD(AC_VERB_SET_CONNECT_SEL, RT286_MIXER_IN1, 0) +#define RT286_ADC1_MUX\ + VERB_CMD(AC_VERB_SET_CONNECT_SEL, RT286_MIXER_IN2, 0) +#define RT286_SET_MIC1\ + VERB_CMD(AC_VERB_SET_PIN_WIDGET_CONTROL, RT286_MIC1, 0) +#define RT286_SET_PIN_HPO\ + VERB_CMD(AC_VERB_SET_PIN_WIDGET_CONTROL, RT286_HP_OUT, 0) +#define RT286_SET_PIN_SPK\ + VERB_CMD(AC_VERB_SET_PIN_WIDGET_CONTROL, RT286_SPK_OUT, 0) +#define RT286_SET_PIN_DMIC1\ + VERB_CMD(AC_VERB_SET_PIN_WIDGET_CONTROL, RT286_DMIC1, 0) +#define RT286_SPK_EAPD\ + VERB_CMD(AC_VERB_SET_EAPD_BTLENABLE, RT286_SPK_OUT, 0) +#define RT286_SET_AMP_GAIN_HPO\ + VERB_CMD(AC_VERB_SET_AMP_GAIN_MUTE, RT286_HP_OUT, 0) +#define RT286_SET_AMP_GAIN_ADC_IN1\ + VERB_CMD(AC_VERB_SET_AMP_GAIN_MUTE, RT286_ADC_IN1, 0) +#define RT286_SET_AMP_GAIN_ADC_IN2\ + VERB_CMD(AC_VERB_SET_AMP_GAIN_MUTE, RT286_ADC_IN2, 0) +#define RT286_GET_HP_SENSE\ + VERB_CMD(AC_VERB_GET_PIN_SENSE, RT286_HP_OUT, 0) +#define RT286_GET_MIC1_SENSE\ + VERB_CMD(AC_VERB_GET_PIN_SENSE, RT286_MIC1, 0) +#define RT286_SET_DMIC2_DEFAULT\ + VERB_CMD(AC_VERB_SET_CONFIG_DEFAULT_BYTES_3, RT286_DMIC2, 0) +#define RT286_DACL_GAIN\ + VERB_CMD(AC_VERB_SET_AMP_GAIN_MUTE, RT286_DAC_OUT1, 0xa000) +#define RT286_DACR_GAIN\ + VERB_CMD(AC_VERB_SET_AMP_GAIN_MUTE, RT286_DAC_OUT1, 0x9000) +#define RT286_ADCL_GAIN\ + VERB_CMD(AC_VERB_SET_AMP_GAIN_MUTE, RT286_ADC_IN1, 0x6000) +#define RT286_ADCR_GAIN\ + VERB_CMD(AC_VERB_SET_AMP_GAIN_MUTE, RT286_ADC_IN1, 0x5000) +#define RT286_MIC_GAIN\ + VERB_CMD(AC_VERB_SET_AMP_GAIN_MUTE, RT286_MIC1, 0x7000) +#define RT286_SPOL_GAIN\ + VERB_CMD(AC_VERB_SET_AMP_GAIN_MUTE, RT286_SPK_OUT, 0xa000) +#define RT286_SPOR_GAIN\ + VERB_CMD(AC_VERB_SET_AMP_GAIN_MUTE, RT286_SPK_OUT, 0x9000) +#define RT286_HPOL_GAIN\ + VERB_CMD(AC_VERB_SET_AMP_GAIN_MUTE, RT286_HP_OUT, 0xa000) +#define RT286_HPOR_GAIN\ + VERB_CMD(AC_VERB_SET_AMP_GAIN_MUTE, RT286_HP_OUT, 0x9000) +#define RT286_F_DAC_SWITCH\ + VERB_CMD(AC_VERB_SET_AMP_GAIN_MUTE, RT286_MIXER_OUT1, 0x7000) +#define RT286_F_RECMIX_SWITCH\ + VERB_CMD(AC_VERB_SET_AMP_GAIN_MUTE, RT286_MIXER_OUT1, 0x7100) +#define RT286_REC_MIC_SWITCH\ + VERB_CMD(AC_VERB_SET_AMP_GAIN_MUTE, RT286_MIXER_IN, 0x7000) +#define RT286_REC_I2S_SWITCH\ + VERB_CMD(AC_VERB_SET_AMP_GAIN_MUTE, RT286_MIXER_IN, 0x7100) +#define RT286_REC_LINE_SWITCH\ + VERB_CMD(AC_VERB_SET_AMP_GAIN_MUTE, RT286_MIXER_IN, 0x7200) +#define RT286_REC_BEEP_SWITCH\ + VERB_CMD(AC_VERB_SET_AMP_GAIN_MUTE, RT286_MIXER_IN, 0x7300) +#define RT286_DAC_FORMAT\ + VERB_CMD(AC_VERB_SET_STREAM_FORMAT, RT286_DAC_OUT1, 0) +#define RT286_ADC_FORMAT\ + VERB_CMD(AC_VERB_SET_STREAM_FORMAT, RT286_ADC_IN1, 0) +#define RT286_COEF_INDEX\ + VERB_CMD(AC_VERB_SET_COEF_INDEX, RT286_VENDOR_REGISTERS, 0) +#define RT286_PROC_COEF\ + VERB_CMD(AC_VERB_SET_PROC_COEF, RT286_VENDOR_REGISTERS, 0) +#define RT286_SET_GPIO_MASK\ + VERB_CMD(AC_VERB_SET_GPIO_MASK, RT286_AUDIO_FUNCTION_GROUP, 0) +#define RT286_SET_GPIO_DIRECTION\ + VERB_CMD(AC_VERB_SET_GPIO_DIRECTION, RT286_AUDIO_FUNCTION_GROUP, 0) +#define RT286_SET_GPIO_DATA\ + VERB_CMD(AC_VERB_SET_GPIO_DATA, RT286_AUDIO_FUNCTION_GROUP, 0) + +/* Index registers */ +#define RT286_A_BIAS_CTRL1 0x01 +#define RT286_A_BIAS_CTRL2 0x02 +#define RT286_POWER_CTRL1 0x03 +#define RT286_A_BIAS_CTRL3 0x04 +#define RT286_POWER_CTRL2 0x08 +#define RT286_I2S_CTRL1 0x09 +#define RT286_I2S_CTRL2 0x0a +#define RT286_CLK_DIV 0x0b +#define RT286_DC_GAIN 0x0d +#define RT286_POWER_CTRL3 0x0f +#define RT286_MIC1_DET_CTRL 0x19 +#define RT286_MISC_CTRL1 0x20 +#define RT286_GPIO_CTRL 0x29 +#define RT286_IRQ_CTRL 0x33 +#define RT286_PLL_CTRL1 0x49 +#define RT286_CBJ_CTRL1 0x4f +#define RT286_CBJ_CTRL2 0x50 +#define RT286_PLL_CTRL 0x63 +#define RT286_DEPOP_CTRL1 0x66 +#define RT286_DEPOP_CTRL2 0x67 +#define RT286_DEPOP_CTRL3 0x68 +#define RT286_DEPOP_CTRL4 0x69 + +/* SPDIF (0x06) */ +#define RT286_SPDIF_SEL_SFT 0 +#define RT286_SPDIF_SEL_PCM0 0 +#define RT286_SPDIF_SEL_PCM1 1 +#define RT286_SPDIF_SEL_SPOUT 2 +#define RT286_SPDIF_SEL_PP 3 + +/* RECMIX (0x0b) */ +#define RT286_M_REC_BEEP_SFT 0 +#define RT286_M_REC_LINE1_SFT 1 +#define RT286_M_REC_MIC1_SFT 2 +#define RT286_M_REC_I2S_SFT 3 + +/* Front (0x0c) */ +#define RT286_M_FRONT_DAC_SFT 0 +#define RT286_M_FRONT_REC_SFT 1 + +/* SPK-OUT (0x14) */ +#define RT286_M_SPK_MUX_SFT 14 +#define RT286_SPK_SEL_MASK 0x1 +#define RT286_SPK_SEL_SFT 0 +#define RT286_SPK_SEL_F 0 +#define RT286_SPK_SEL_S 1 + +/* HP-OUT (0x21) */ +#define RT286_M_HP_MUX_SFT 14 +#define RT286_HP_SEL_MASK 0x1 +#define RT286_HP_SEL_SFT 0 +#define RT286_HP_SEL_F 0 +#define RT286_HP_SEL_S 1 + +/* ADC (0x22) (0x23) */ +#define RT286_ADC_SEL_MASK 0x7 +#define RT286_ADC_SEL_SFT 0 +#define RT286_ADC_SEL_SURR 0 +#define RT286_ADC_SEL_FRONT 1 +#define RT286_ADC_SEL_DMIC 2 +#define RT286_ADC_SEL_BEEP 4 +#define RT286_ADC_SEL_LINE1 5 +#define RT286_ADC_SEL_I2S 6 +#define RT286_ADC_SEL_MIC1 7 + +#define RT286_SCLK_S_MCLK 0 +#define RT286_SCLK_S_PLL 1 + +enum { + RT286_AIF1, + RT286_AIF2, + RT286_AIFS, +}; + +#endif /* __RT286_H__ */ + -- cgit v1.3.1