From 4352b8aee98005853aa63f57d6377282de17a33f Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sun, 23 Aug 2026 13:28:57 -0700 Subject: Merge tag 'i3c/for-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux Pull I3C updates from Alexandre Belloni: "A new driver this cycle, for the AMD AXI I3C controller. There are also new features such as IBI wakeup support, SETAASA device discovery and ACPI support for the the DAA methods, meaning we can now communicate with the SPD devices on DDR5 modules. New driver: - AMD AXI I3C master controller Subsystem: - I3C Common Command Code (CCC) handling improvements, especially around GET CCCs - SETAASA device discovery support - ACPI support for all existing DAA methods like SETDASA, SETNEWDA as well as I2C devices on I3C bus - IBI-based wakeup support Drivers: - dw: SETAASA support - mipi-i3c-hci: advertise IBI wakeup capability, AMD_PT I3C controller support, PIO queue management support for HCI v1.2 - renesas: improve suspend to RAM support, add runtime PM support" * tag 'i3c/for-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux: (70 commits) i3c: dw: reduce do_daa time if there's no client i3c: mipi-i3c-hci: Add support for AMD_PT I3C controller i3c: mipi-i3c-hci: Add PIO queue management support for HCI v1.2 i3c: mipi-i3c-hci: Fix missing STAT_IBI_STATUS_THLD in PIO mode i3c: dw: rename "pclk" to "apb" to match dt-binding i3c: dw: make struct dw_i3c_cmd smaller i3c: dw: use COMMAND_PORT_TRANSFER_ARG instead of hardcoding i3c: renesas: Don't register devices when ENTDAA times out i3c: master: dw-i3c-master: fix OD timing for first broadcast i3c: mipi-i3c-hci: Advertise IBI wakeup capability i3c: mipi-i3c-hci: Factor out i3c_hci_sysdev() i3c: mipi-i3c-hci-pci: Propagate I3C wakeup requirements to PCI i3c: master: Reject IBI requests from non-IBI-capable devices i3c: master: Add helper to query bus wakeup requirements i3c: master: Report wakeup events for IBIs i3c: master: Support IBI-based wakeup capability i3c: master: Fix potential UAF in i3c_device_match() i3c: master: Fix potential UAF in i3c_device_uevent() i3c: Make dev->desc locking assumptions explicit i3c: master: Fix use-after-free of master->this ... --- scripts/verify_builtin_ranges.awk | 370 ++++++++++++++++++++++++++++++++++++++ 1 file changed, 370 insertions(+) create mode 100755 scripts/verify_builtin_ranges.awk (limited to 'scripts/verify_builtin_ranges.awk') diff --git a/scripts/verify_builtin_ranges.awk b/scripts/verify_builtin_ranges.awk new file mode 100755 index 000000000..0de7ed521 --- /dev/null +++ b/scripts/verify_builtin_ranges.awk @@ -0,0 +1,370 @@ +#!/usr/bin/gawk -f +# SPDX-License-Identifier: GPL-2.0 +# verify_builtin_ranges.awk: Verify address range data for builtin modules +# Written by Kris Van Hees +# +# Usage: verify_builtin_ranges.awk modules.builtin.ranges System.map \ +# modules.builtin vmlinux.map vmlinux.o.map +# + +# Return the module name(s) (if any) associated with the given object. +# +# If we have seen this object before, return information from the cache. +# Otherwise, retrieve it from the corresponding .cmd file. +# +function get_module_info(fn, mod, obj, s) { + if (fn in omod) + return omod[fn]; + + if (match(fn, /\/[^/]+$/) == 0) + return ""; + + obj = fn; + mod = ""; + fn = substr(fn, 1, RSTART) "." substr(fn, RSTART + 1) ".cmd"; + if (getline s 0) { + mod = substr(s, RSTART + 16, RLENGTH - 16); + gsub(/['"]/, "", mod); + } else if (match(s, /RUST_MODFILE=[^ ]+/) > 0) + mod = substr(s, RSTART + 13, RLENGTH - 13); + } else { + print "ERROR: Failed to read: " fn "\n\n" \ + " For kernels built with O=, cd to \n" \ + " and execute this script as ./source/scripts/..." \ + >"/dev/stderr"; + close(fn); + total = 0; + exit(1); + } + close(fn); + + # A single module (common case) also reflects objects that are not part + # of a module. Some of those objects have names that are also a module + # name (e.g. core). We check the associated module file name, and if + # they do not match, the object is not part of a module. + if (mod !~ / /) { + if (!(mod in mods)) + mod = ""; + } + + gsub(/([^/ ]*\/)+/, "", mod); + gsub(/-/, "_", mod); + + # At this point, mod is a single (valid) module name, or a list of + # module names (that do not need validation). + omod[obj] = mod; + + return mod; +} + +# Return a representative integer value for a given hexadecimal address. +# +# Since all kernel addresses fall within the same memory region, we can safely +# strip off the first 6 hex digits before performing the hex-to-dec conversion, +# thereby avoiding integer overflows. +# +function addr2val(val) { + sub(/^0x/, "", val); + if (length(val) == 16) + val = substr(val, 5); + return strtonum("0x" val); +} + +# Determine the kernel build directory to use (default is .). +# +BEGIN { + if (ARGC < 6) { + print "Syntax: verify_builtin_ranges.awk \n" \ + " \n" \ + >"/dev/stderr"; + total = 0; + exit(1); + } +} + +# (1) Load the built-in module address range data. +# +ARGIND == 1 { + ranges[FNR] = $0; + rcnt++; + next; +} + +# (2) Annotate System.map symbols with module names. +# +ARGIND == 2 { + addr = addr2val($1); + name = $3; + + while (addr >= mod_eaddr) { + if (sect_symb) { + if (sect_symb != name) + next; + + sect_base = addr - sect_off; + if (dbg) + printf "[%s] BASE (%s) %016x - %016x = %016x\n", sect_name, sect_symb, addr, sect_off, sect_base >"/dev/stderr"; + sect_symb = 0; + } + + if (++ridx > rcnt) + break; + + $0 = ranges[ridx]; + sub(/-/, " "); + if ($4 != "=") { + sub(/-/, " "); + mod_saddr = strtonum("0x" $2) + sect_base; + mod_eaddr = strtonum("0x" $3) + sect_base; + $1 = $2 = $3 = ""; + sub(/^ +/, ""); + mod_name = $0; + + if (dbg) + printf "[%s] %s from %016x to %016x\n", sect_name, mod_name, mod_saddr, mod_eaddr >"/dev/stderr"; + } else { + sect_name = $1; + sect_off = strtonum("0x" $2); + sect_symb = $5; + } + } + + idx = addr"-"name; + if (addr >= mod_saddr && addr < mod_eaddr) + sym2mod[idx] = mod_name; + + next; +} + +# Once we are done annotating the System.map, we no longer need the ranges data. +# +FNR == 1 && ARGIND == 3 { + delete ranges; +} + +# (3) Build a lookup map of built-in module names. +# +# Lines from modules.builtin will be like: +# kernel/crypto/lzo-rle.ko +# and we record the object name "crypto/lzo-rle". +# +ARGIND == 3 { + sub(/kernel\//, ""); # strip off "kernel/" prefix + sub(/\.ko$/, ""); # strip off .ko suffix + + mods[$1] = 1; + next; +} + +# (4) Get a list of symbols (per object). +# +# Symbols by object are read from vmlinux.map, with fallback to vmlinux.o.map +# if vmlinux is found to have inked in vmlinux.o. +# + +# If we were able to get the data we need from vmlinux.map, there is no need to +# process vmlinux.o.map. +# +FNR == 1 && ARGIND == 5 && total > 0 { + if (dbg) + printf "Note: %s is not needed.\n", FILENAME >"/dev/stderr"; + exit; +} + +# First determine whether we are dealing with a GNU ld or LLVM lld linker map. +# +ARGIND >= 4 && FNR == 1 && NF == 7 && $1 == "VMA" && $7 == "Symbol" { + map_is_lld = 1; + next; +} + +# (LLD) Convert a section record fronm lld format to ld format. +# +ARGIND >= 4 && map_is_lld && NF == 5 && /[0-9] [^ ]+$/ { + $0 = $5 " 0x"$1 " 0x"$3 " load address 0x"$2; +} + +# (LLD) Convert an object record from lld format to ld format. +# +ARGIND >= 4 && map_is_lld && NF == 5 && $5 ~ /:\(/ { + if (/\.a\(/ && !/ vmlinux\.a\(/) + next; + + gsub(/\)/, ""); + sub(/:\(/, " "); + sub(/ vmlinux\.a\(/, " "); + $0 = " "$6 " 0x"$1 " 0x"$3 " " $5; +} + +# (LLD) Convert a symbol record from lld format to ld format. +# +ARGIND >= 4 && map_is_lld && NF == 5 && $5 ~ /^[A-Za-z_][A-Za-z0-9_]*$/ { + $0 = " 0x" $1 " " $5; +} + +# (LLD) We do not need any other ldd linker map records. +# +ARGIND >= 4 && map_is_lld && /^[0-9a-f]{16} / { + next; +} + +# Handle section records with long section names (spilling onto a 2nd line). +# +ARGIND >= 4 && !map_is_lld && NF == 1 && /^[^ ]/ { + s = $0; + getline; + $0 = s " " $0; +} + +# Next section - previous one is done. +# +ARGIND >= 4 && /^[^ ]/ { + sect = 0; +} + +# Get the (top level) section name. +# +ARGIND >= 4 && /^\./ { + # Explicitly ignore a few sections that are not relevant here. + if ($1 ~ /^\.orc_/ || $1 ~ /_sites$/ || $1 ~ /\.percpu/) + next; + + # Sections with a 0-address can be ignored as well (in vmlinux.map). + if (ARGIND == 4 && $2 ~ /^0x0+$/) + next; + + sect = $1; + + next; +} + +# If we are not currently in a section we care about, ignore records. +# +!sect { + next; +} + +# Handle object records with long section names (spilling onto a 2nd line). +# +ARGIND >= 4 && /^ [^ \*]/ && NF == 1 { + # If the section name is long, the remainder of the entry is found on + # the next line. + s = $0; + getline; + $0 = s " " $0; +} + +# Objects linked in from static libraries are ignored. +# If the object is vmlinux.o, we need to consult vmlinux.o.map for per-object +# symbol information +# +ARGIND == 4 && /^ [^ ]/ && NF == 4 { + if ($4 ~ /\.a\(/) + next; + + idx = sect":"$1; + if (!(idx in sect_addend)) { + sect_addend[idx] = addr2val($2); + if (dbg) + printf "ADDEND %s = %016x\n", idx, sect_addend[idx] >"/dev/stderr"; + } + if ($4 == "vmlinux.o") { + need_o_map = 1; + next; + } +} + +# If data from vmlinux.o.map is needed, we only process section and object +# records from vmlinux.map to determine which section we need to pay attention +# to in vmlinux.o.map. So skip everything else from vmlinux.map. +# +ARGIND == 4 && need_o_map { + next; +} + +# Get module information for the current object. +# +ARGIND >= 4 && /^ [^ ]/ && NF == 4 { + msect = $1; + mod_name = get_module_info($4); + mod_eaddr = addr2val($2) + addr2val($3); + + next; +} + +# Process a symbol record. +# +# Evaluate the module information obtained from vmlinux.map (or vmlinux.o.map) +# as follows: +# - For all symbols in a given object: +# - If the symbol is annotated with the same module name(s) that the object +# belongs to, count it as a match. +# - Otherwise: +# - If the symbol is known to have duplicates of which at least one is +# in a built-in module, disregard it. +# - If the symbol us not annotated with any module name(s) AND the +# object belongs to built-in modules, count it as missing. +# - Otherwise, count it as a mismatch. +# +ARGIND >= 4 && /^ / && NF == 2 && $1 ~ /^0x/ { + idx = sect":"msect; + if (!(idx in sect_addend)) + next; + + addr = addr2val($1); + + # Handle the rare but annoying case where a 0-size symbol is placed at + # the byte *after* the module range. Based on vmlinux.map it will be + # considered part of the current object, but it falls just beyond the + # module address range. Unfortunately, its address could be at the + # start of another built-in module, so the only safe thing to do is to + # ignore it. + if (mod_name && addr == mod_eaddr) + next; + + # If we are processing vmlinux.o.map, we need to apply the base address + # of the section to the relative address on the record. + # + if (ARGIND == 5) + addr += sect_addend[idx]; + + idx = addr"-"$2; + mod = ""; + if (idx in sym2mod) { + mod = sym2mod[idx]; + if (sym2mod[idx] == mod_name) { + mod_matches++; + matches++; + } else if (mod_name == "") { + print $2 " in " mod " (should NOT be)"; + mismatches++; + } else { + print $2 " in " mod " (should be " mod_name ")"; + mismatches++; + } + } else if (mod_name != "") { + print $2 " should be in " mod_name; + missing++; + } else + matches++; + + total++; + + next; +} + +# Issue the comparison report. +# +END { + if (total) { + printf "Verification of %s:\n", ARGV[1]; + printf " Correct matches: %6d (%d%% of total)\n", matches, 100 * matches / total; + printf " Module matches: %6d (%d%% of matches)\n", mod_matches, 100 * mod_matches / matches; + printf " Mismatches: %6d (%d%% of total)\n", mismatches, 100 * mismatches / total; + printf " Missing: %6d (%d%% of total)\n", missing, 100 * missing / total; + + if (mismatches || missing) + exit(1); + } +} -- cgit v1.3.1