From 684b413b5483f57c890c171b9400076a0143b918 Mon Sep 17 00:00:00 2001 From: Niklas Cassel Date: Fri, 18 Sep 2026 16:06:42 +0200 Subject: virtio_blk: set the zone write granularity virtblk_read_zoned_limits() reads the write granularity that the device reports in virtio_blk_zoned_characteristics and assigns it to the physical block size and to io_min, but never to the limit that is named after it. queue_limits.zone_write_granularity is left at zero, so blk_validate_zoned_limits() raises it to the logical block size: if (lim->zone_write_granularity < lim->logical_block_size) lim->zone_write_granularity = lim->logical_block_size; A device that reports a granularity coarser than its logical block size, which is what the field exists to express, therefore has it silently reduced. A 512e host managed disk passed through to a guest reports a logical block size of 512 and a write granularity of 4096, and the guest ends up with a zone write granularity of 512. bio_split_alignment() returns lim->zone_write_granularity if it is non-zero and bio_split_io_at() may split a bio with as per bio_split_alignment(). This can real to the write getting rejected by the host drive, as the write is not aligned to the physical block size. zonefs also takes its block size from bdev_zone_write_granularity(), so it would incorrectly use 512 on a disk that requires 4096. sd_zbc_read_zones() sets the limit from the physical block size for the same reason. NVMe ZNS and null_blk leave it unset, but the fallback gives the right answer for them, as their write granularity is the logical block size. virtio carries a separate value that may exceed it. Set the zone write granularity from the value that the device reports. Fixes: 95bfec41bd3d ("virtio-blk: add support for zoned block devices") Signed-off-by: Niklas Cassel Reviewed-by: Stefan Hajnoczi Link: https://patch.msgid.link/20260918140641.2031075-2-cassel@kernel.org Signed-off-by: Jens Axboe --- scripts/package/kernel.spec | 226 ++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 226 insertions(+) create mode 100644 scripts/package/kernel.spec (limited to 'scripts/package/kernel.spec') diff --git a/scripts/package/kernel.spec b/scripts/package/kernel.spec new file mode 100644 index 000000000..46e80970f --- /dev/null +++ b/scripts/package/kernel.spec @@ -0,0 +1,226 @@ +# _arch is undefined if /usr/lib/rpm/platform/*/macros was not included. +%{!?_arch: %define _arch dummy} +%{!?make: %define make make} +%define makeflags %{?_smp_mflags} ARCH=%{ARCH} + +Name: kernel +Summary: The Linux Kernel +Version: %(echo %{KERNELRELEASE} | sed -e 's/-/_/g') +Release: %{pkg_release}%{?dist} +License: GPL +Group: System Environment/Kernel +Vendor: The Linux Community +URL: https://www.kernel.org +Source0: linux.tar.gz +Source1: config +Source2: diff.patch +Provides: kernel-%{KERNELRELEASE} +BuildRequires: bc binutils bison dwarves +BuildRequires: (elfutils-devel or libdw-devel) +BuildRequires: (elfutils-libelf-devel or libelf-devel) flex +BuildRequires: gcc make openssl openssl-devel perl python3 rsync + +%description +The Linux Kernel, the operating system core itself + +%package headers +Summary: Header files for the Linux kernel for use by glibc +Group: Development/System +Obsoletes: kernel-headers < %{version} +Provides: kernel-headers = %{version} +%description headers +Kernel-headers includes the C header files that specify the interface +between the Linux kernel and userspace libraries and programs. The +header files define structures and constants that are needed for +building most standard programs and are also needed for rebuilding the +glibc package. + +%if %{with_devel} +%package devel +Summary: Development package for building kernel modules to match the %{version} kernel +Group: System Environment/Kernel +AutoReqProv: no +%description -n kernel-devel +This package provides kernel headers and makefiles sufficient to build modules +against the %{version} kernel package. +%endif + +%if %{with_debuginfo_manual} +%package debuginfo +Summary: Debug information package for the Linux kernel +Group: Development/Debug +AutoReq: 0 +AutoProv: 1 +%description debuginfo +This package provides debug information for the kernel image and modules from the +%{version} package. +%define install_mod_strip 1 +%endif + +%if %{with_debuginfo_rpm} +# list of debuginfo-related options taken from distribution kernel.spec +# files +%undefine _include_minidebuginfo +%undefine _find_debuginfo_dwz_opts +%undefine _unique_build_ids +%undefine _unique_debug_names +%undefine _unique_debug_srcs +%undefine _debugsource_packages +%undefine _debuginfo_subpackages + +# Preserve .BTF and .BTF.base sections in kernel modules during debuginfo +# stripping. find-debuginfo.sh uses eu-strip which removes non-allocated ELF +# sections like .BTF by default. .BTF.base is required for BTF distillation +# support; without it, module BTF validation fails. +%global with_keep_section %(%{__find_debuginfo} --help 2>&1 | grep -c keep-section) +%if %{with_keep_section} +%global _find_debuginfo_opts -r --keep-section .BTF --keep-section .BTF.base +%else +%global _find_debuginfo_opts -r +%endif + +%global _missing_build_ids_terminate_build 1 +%global _no_recompute_build_ids 1 +%{debug_package} + +# later, we make all modules executable so that find-debuginfo.sh strips +# them up. but they don't actually need to be executable, so remove the +# executable bit, taking care to do it _after_ find-debuginfo.sh has run +%define __spec_install_post \ + %{?__debug_package:%{__debug_install_post}} \ + %{__arch_install_post} \ + %{__os_install_post} \ + find %{buildroot}/lib/modules/%{KERNELRELEASE} -name "*.ko" -type f \\\ + | xargs --no-run-if-empty chmod u-x +%else +%define __spec_install_post /usr/lib/rpm/brp-compress || : +%endif +# some (but not all) versions of rpmbuild emit %%debug_package with +# %%install. since we've already emitted it manually, that would cause +# a package redefinition error. ensure that doesn't happen +%define debug_package %{nil} + +%prep +%setup -q -n linux +cp %{SOURCE1} .config +patch -p1 < %{SOURCE2} + +%build +%{make} %{makeflags} KERNELRELEASE=%{KERNELRELEASE} KBUILD_BUILD_VERSION=%{release} + +%install +mkdir -p %{buildroot}/lib/modules/%{KERNELRELEASE} +cp $(%{make} %{makeflags} -s image_name) %{buildroot}/lib/modules/%{KERNELRELEASE}/vmlinuz +# DEPMOD=true makes depmod no-op. We do not package depmod-generated files. +%{make} %{makeflags} INSTALL_MOD_PATH=%{buildroot} %{?install_mod_strip:INSTALL_MOD_STRIP=1} DEPMOD=true modules_install +%{make} %{makeflags} INSTALL_HDR_PATH=%{buildroot}/usr headers_install +cp System.map %{buildroot}/lib/modules/%{KERNELRELEASE} +cp .config %{buildroot}/lib/modules/%{KERNELRELEASE}/config +if %{make} %{makeflags} run-command KBUILD_RUN_COMMAND='test -d ${srctree}/arch/${SRCARCH}/boot/dts' 2>/dev/null; then + %{make} %{makeflags} INSTALL_DTBS_PATH=%{buildroot}/lib/modules/%{KERNELRELEASE}/dtb dtbs_install +fi +ln -fns /usr/src/kernels/%{KERNELRELEASE} %{buildroot}/lib/modules/%{KERNELRELEASE}/build +%if %{with_devel} +%{make} %{makeflags} run-command KBUILD_RUN_COMMAND='${srctree}/scripts/package/install-extmod-build %{buildroot}/usr/src/kernels/%{KERNELRELEASE}' +%endif + +{ + echo "/lib/modules/%{KERNELRELEASE}" + + for x in alias alias.bin builtin.alias.bin builtin.bin dep dep.bin \ + devname softdep symbols symbols.bin weakdep; do + echo "%ghost /lib/modules/%{KERNELRELEASE}/modules.${x}" + done + + for x in System.map config vmlinuz; do + echo "%ghost /boot/${x}-%{KERNELRELEASE}" + done + + if [ -d "%{buildroot}/lib/modules/%{KERNELRELEASE}/dtb" ];then + find "%{buildroot}/lib/modules/%{KERNELRELEASE}/dtb" -printf "%%%ghost /boot/dtb-%{KERNELRELEASE}/%%P\n" + fi + + echo "%exclude /lib/modules/%{KERNELRELEASE}/build" +} > %{buildroot}/kernel.list + +%if 0%{with_debuginfo_manual}%{with_debuginfo_rpm} > 0 +# copying vmlinux directly to the debug directory means it will not get +# stripped (but its source paths will still be collected + fixed up) +mkdir -p %{buildroot}/usr/lib/debug/lib/modules/%{KERNELRELEASE} +cp vmlinux %{buildroot}/usr/lib/debug/lib/modules/%{KERNELRELEASE} +%endif + +%if %{with_debuginfo_rpm} +# make modules executable so that find-debuginfo.sh strips them. this +# will be undone later in %%__spec_install_post +find %{buildroot}/lib/modules/%{KERNELRELEASE} -name "*.ko" -type f \ + | xargs --no-run-if-empty chmod u+x +%endif + +%if %{with_debuginfo_manual} +echo /usr/lib/debug/lib/modules/%{KERNELRELEASE}/vmlinux > %{buildroot}/debuginfo.list +while read -r mod; do + mod="${mod%.o}.ko" + dbg="%{buildroot}/usr/lib/debug/lib/modules/%{KERNELRELEASE}/kernel/${mod}" + buildid=$("${READELF:-readelf}" -n "${mod}" | sed -n 's@^.*Build ID: \(..\)\(.*\)@\1/\2@p') + link="%{buildroot}/usr/lib/debug/.build-id/${buildid}.debug" + + mkdir -p "${dbg%/*}" "${link%/*}" + "${OBJCOPY:-objcopy}" --only-keep-debug "${mod}" "${dbg}" + ln -sf --relative "${dbg}" "${link}" + + echo "${dbg#%{buildroot}}" >> %{buildroot}/debuginfo.list + echo "${link#%{buildroot}}" >> %{buildroot}/debuginfo.list +done < modules.order +%endif + +%clean +rm -rf %{buildroot} +%if %{with_debuginfo_rpm} +rm -f debugfiles.list debuglinks.list debugsourcefiles.list debugsources.list \ + elfbins.list +%endif + +%post +if [ -x /usr/bin/kernel-install ]; then + /usr/bin/kernel-install add %{KERNELRELEASE} /lib/modules/%{KERNELRELEASE}/vmlinuz +fi +for file in vmlinuz System.map config; do + if ! cmp --silent "/lib/modules/%{KERNELRELEASE}/${file}" "/boot/${file}-%{KERNELRELEASE}"; then + cp "/lib/modules/%{KERNELRELEASE}/${file}" "/boot/${file}-%{KERNELRELEASE}" + fi +done +if [ -d "/lib/modules/%{KERNELRELEASE}/dtb" ] && \ + ! diff -rq "/lib/modules/%{KERNELRELEASE}/dtb" "/boot/dtb-%{KERNELRELEASE}" >/dev/null 2>&1; then + rm -rf "/boot/dtb-%{KERNELRELEASE}" + cp -r "/lib/modules/%{KERNELRELEASE}/dtb" "/boot/dtb-%{KERNELRELEASE}" +fi +if [ ! -e "/lib/modules/%{KERNELRELEASE}/modules.dep" ]; then + /usr/sbin/depmod %{KERNELRELEASE} +fi + +%preun +if [ -x /usr/bin/kernel-install ]; then +kernel-install remove %{KERNELRELEASE} +fi + +%files -f %{buildroot}/kernel.list +%defattr (-, root, root) +%exclude /kernel.list + +%files headers +%defattr (-, root, root) +/usr/include + +%if %{with_devel} +%files devel +%defattr (-, root, root) +/usr/src/kernels/%{KERNELRELEASE} +/lib/modules/%{KERNELRELEASE}/build +%endif + +%if %{with_debuginfo_manual} +%files -f %{buildroot}/debuginfo.list debuginfo +%defattr (-, root, root) +%exclude /debuginfo.list +%endif -- cgit v1.3.1