From a5f7a5bb3b7f28ba7e4fa246775b29a0e5537255 Mon Sep 17 00:00:00 2001 From: Jinke Han Date: Tue, 8 Sep 2026 15:37:42 +0800 Subject: x86/kprobes: Fix crash when probing CS CALL instructions When using eBPF to probe CS CALL instructions within a function, a crash can be triggered. The eBPF tool probes offset 257 of the __hrtimer_run_queues() function: <__hrtimer_run_queues+249>: nopl 0x0(%rax,%rax,1) <__hrtimer_run_queues+254>: mov %r14,%rdi <__hrtimer_run_queues+257>: cs call <__x86_indirect_thunk_r12> <__hrtimer_run_queues+263>: mov %eax,%r12d <__hrtimer_run_queues+266>: xchg %ax,%ax <__hrtimer_run_queues+268>: mov %r13,%rdi Which triggers this crash: BUG: unable to handle page fault for address: 00000000000f41c9 #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page PGD 0 P4D 0 Oops: 0002 [#1] SMP NOPTI CPU: 1 PID: 0 Comm: swapper/1 Kdump: loaded Tainted: P RIP: 0010:__hrtimer_run_queues+0x106/0x230 Note that __hrtimer_run_queues+0x106 is __hrtimer_run_queues+262, which is at the 6th byte of the above CS CALL instruction. Since the CS CALL instruction occupies 6 bytes, the exception occurred in the middle of that call instruction. The root cause is that when using eBPF tools to probe in the middle of a function, a kprobe with INT3 is used as the underlying implementation. During single-step emulation of the original CALL instruction, int3_emulate_call() assumes that the probed CALL instruction is 5 bytes long. However, the actual CS-prefixed CALL instruction occupies 6 bytes, so it constructs an incorrect exception return address. When the CPU returns from the kprobe handler, the next instruction to be executed is at the address of the last byte of that CS CALL instruction. Coincidentally, starting from that address, the CPU fetches and decodes a completely different instruction, which ultimately triggers a kernel crash. Fix the issue by using the actual instruction length obtained from the instruction decoder when constructing the exception return address, rather than relying on the hardcoded CALL_INSN_SIZE macro. [ mingo: Refined the changelog ] Fixes: 6256e668b7af ("x86/kprobes: Use int3 instead of debug trap for single-step") Suggested-by: Masami Hiramatsu (Google) Signed-off-by: Jinke Han Signed-off-by: Ingo Molnar Reviewed-by: Masami Hiramatsu (Google) Acked-by: Yafang Shao Acked-by: Borislav Petkov Cc: Peter Zijlstra Link: https://patch.msgid.link/20260908073742.GA10517@didi-ThinkCentre-M920t-N000 --- scripts/check-sysctl-docs | 174 ++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 174 insertions(+) create mode 100755 scripts/check-sysctl-docs (limited to 'scripts/check-sysctl-docs') diff --git a/scripts/check-sysctl-docs b/scripts/check-sysctl-docs new file mode 100755 index 000000000..910fd8a9a --- /dev/null +++ b/scripts/check-sysctl-docs @@ -0,0 +1,174 @@ +#!/usr/bin/env -S gawk -f +# SPDX-License-Identifier: GPL-2.0 + +# Script to check sysctl documentation against source files +# +# Copyright (c) 2020 Stephen Kitt + +# Example invocation: +# scripts/check-sysctl-docs -vtable="kernel" \ +# Documentation/admin-guide/sysctl/kernel.rst \ +# $(git grep -l register_sysctl) +# +# Specify -vdebug=1 to see debugging information + +BEGIN { + if (!table) { + print "Please specify the table to look for using the table variable" > "/dev/stderr" + exit 1 + } + + # Documentation title skiplist + skiplist[0] = "^Documentation for" + skiplist[1] = "Network core options$" + skiplist[2] = "POSIX message queues filesystem$" + skiplist[3] = "Configuration options" + skiplist[4] = ". /proc/sys/fs" + skiplist[5] = "^Introduction$" + skiplist[6] = "^seccomp$" + skiplist[7] = "^pty$" + skiplist[8] = "^firmware_config$" + skiplist[9] = "^random$" +} + +# The following globals are used: +# documented: maps documented entries (each key is an entry) +# entries: maps ctl_table names and procnames to counts (so +# enumerating the subkeys for a given ctl_table lists its +# procnames) +# curtable: the name of the current ctl_table struct +# curentry: the name of the current proc entry (procname when parsing +# a ctl_table, constructed path when parsing a ctl_path) + + +# Remove punctuation from the given value +function trimpunct(value) { + while (value ~ /^["&]/) { + value = substr(value, 2) + } + while (value ~ /[]["&,}]$/) { + value = substr(value, 1, length(value) - 1) + } + return value +} + +# Print the information for the given entry +function printentry(entry) { + seen[entry]++ + printf "* %s from %s", entry, file[entry] + if (documented[entry]) { + printf " (documented)" + } + print "" +} + + +# Stage 1: build the list of documented entries +FNR == NR && /^=+$/ { + for (i in skiplist) { + if (prevline ~ skiplist[i]) { + next + } + } + + # The previous line is a section title, parse it + $0 = prevline + if (debug) print "Parsing " $0 + inbrackets = 0 + for (i = 1; i <= NF; i++) { + if (length($i) == 0) { + continue + } + if (!inbrackets && substr($i, 1, 1) == "(") { + inbrackets = 1 + } + if (!inbrackets) { + token = trimpunct($i) + if (length(token) > 0 && token != "and") { + if (debug) print trimpunct($i) + documented[trimpunct($i)]++ + } + } + if (inbrackets && substr($i, length($i), 1) == ")") { + inbrackets = 0 + } + } +} + +FNR == NR { + prevline = $0 + next +} + + +# Stage 2: process each file and find all sysctl tables +BEGINFILE { + delete entries + curtable = "" + curentry = "" + delete vars + if (debug) print "Processing file " FILENAME +} + +/^static( const)? struct ctl_table/ { + match($0, /static( const)? struct ctl_table ([^][]+)/, tables) + curtable = tables[2] + if (debug) print "Processing table " curtable +} + +/^};$/ { + curtable = "" + curentry = "" + delete vars +} + +curtable && /\.procname[\t ]*=[\t ]*".+"/ { + match($0, /.procname[\t ]*=[\t ]*"([^"]+)"/, names) + curentry = names[1] + if (debug) print "Adding entry " curentry " to table " curtable + entries[curtable][curentry]++ + file[curentry] = FILENAME +} + +curtable && /UCOUNT_ENTRY.*/ { + match($0, /UCOUNT_ENTRY\("([^"]+)"\)/, names) + curentry = names[1] + if (debug) print "Adding entry " curentry " to table " curtable + entries[curtable][curentry]++ + file[curentry] = FILENAME +} + +/register_sysctl.*/ { + match($0, /register_sysctl(|_init|_sz)\("([^"]+)" *, *([^,)]+)/, tables) + if (debug) print "Registering table " tables[3] " at " tables[2] + if (tables[2] == table) { + for (entry in entries[tables[3]]) { + printentry(entry) + } + } +} + +/kmemdup.*/ { + match($0, /([^ \t]+) *= *kmemdup\(([^,]+) *,/, names) + if (debug) print "Found variable " names[1] " for table " names[2] + if (names[2] in entries) { + vars[names[1]] = names[2] + } +} + +/__register_sysctl_table.*/ { + match($0, /__register_sysctl_table\([^,]+, *"([^"]+)" *, *([^,]+)/, tables) + if (debug) print "Registering variable table " tables[2] " at " tables[1] + if (tables[1] == table && tables[2] in vars) { + for (entry in entries[vars[tables[2]]]) { + printentry(entry) + } + } +} + +END { + for (entry in documented) { + if (!seen[entry]) + print "No implementation for " entry + } +} -- cgit v1.3.1