From 106b4a2a78b2a2f14885604891957b84bba502db Mon Sep 17 00:00:00 2001 From: Adrian Betschart Date: Fri, 11 Sep 2026 17:13:14 +0200 Subject: drm/amd/display: Try RGB before YCbCr 4:4:4 in stream validation amdgpu_dm_create_validate_stream_for_sink() walks encoding_order[] and uses the first encoding that validates. YCbCr 4:4:4 is listed before RGB, so an HDMI sink that advertises 4:4:4 gets YCbCr 4:4:4 whenever the "color format" property is left at AUTO, even though RGB fits the same link. That contradicts the documented AUTO behaviour for HDMI in enum drm_connector_color_format (RGB, falling back to YCbCr 4:2:0 only when the bandwidth is not available or the mode is 4:2:0-only), which the amdgpu implementation of the property also describes. It also leaves the "Broadcast RGB" property without effect on such sinks, since the quantization range it selects only applies to RGB output. Try RGB first. The mask still holds every encoding the sink supports, so a mode that cannot carry RGB falls back exactly as before. For reference, v7.2 picked RGB here unless YCbCr 4:4:4 was forced through debugfs, while earlier kernels picked YCbCr 4:4:4 for any HDMI sink that advertised it. Fixes: 0b0ff65d3ca1 ("drm/amd/display: Refactor stream validation") Suggested-by: Adolfo Rodrigues Assisted-by: Claude Code:claude-fable-5-1 Signed-off-by: Adrian Betschart Reviewed-by: Fangzhi Zuo Tested-by: Adolfo Rodrigues Tested-by: Daniel Wheeler Signed-off-by: Alex Deucher (cherry picked from commit 7de432bc753133764dc40d37f9388da56de251e7) --- scripts/bash-completion/make | 451 +++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 451 insertions(+) create mode 100644 scripts/bash-completion/make (limited to 'scripts/bash-completion') diff --git a/scripts/bash-completion/make b/scripts/bash-completion/make new file mode 100644 index 000000000..42e8dcead --- /dev/null +++ b/scripts/bash-completion/make @@ -0,0 +1,451 @@ +# SPDX-License-Identifier: GPL-2.0-only +# bash completion for GNU make with kbuild extension -*- shell-script -*- + +# Load the default completion script for make. It is typically located at +# /usr/share/bash-completion/completions/make, but we do not rely on it. +__kbuild_load_default_make_completion() +{ + local -a dirs=("${BASH_COMPLETION_USER_DIR:-${XDG_DATA_HOME:-$HOME/.local/share}/bash-completion}/completions") + local ifs=$IFS IFS=: dir compfile this_dir + + for dir in ${XDG_DATA_DIRS:-/usr/local/share:/usr/share}; do + dirs+=("$dir"/bash-completion/completions) + done + IFS=$ifs + + this_dir="$(realpath "$(dirname "${BASH_SOURCE[0]}")")" + + for dir in "${dirs[@]}"; do + if [[ ! -d ${dir} || ${dir} = "${this_dir}" ]]; then + continue + fi + + for compfile in make make.bash _make; do + compfile=$dir/$compfile + # Avoid trying to source dirs; https://bugzilla.redhat.com/903540 + if [[ -f ${compfile} ]] && . "${compfile}" &>/dev/null; then + + __kbuild_default_make_completion=$( + # shellcheck disable=SC2046 # word splitting is the point here + set -- $(complete -p make) + + while [[ $# -gt 1 && "$1" != -F ]]; do + shift + done + + if [[ "$1" = -F ]]; then + echo "$2" + fi + ) + + return + fi + done + done +} + +__kbuild_load_default_make_completion + +__kbuild_handle_variable() +{ + local var=${1%%=*} + local cur=${cur#"${var}"=} + local srctree=$2 + local keywords=() + + case $var in + ARCH) + # sub-directories under arch/ + keywords+=($(find "${srctree}/arch" -mindepth 1 -maxdepth 1 -type d -printf '%P\n')) + # architectures hard-coded in the top Makefile + keywords+=(i386 x86_64 sparc32 sparc64 parisc64) + ;; + CROSS_COMPILE) + # toolchains with a full path + local cross_compile=() + local c c2 + _filedir + + for c in "${COMPREPLY[@]}"; do + # eval for tilde expansion + # suppress error, as this fails when it contains a space + eval "c2=${c}" 2>/dev/null || continue + if [[ ${c} == *-elfedit && ! -d ${c2} && -x ${c2} ]]; then + cross_compile+=("${c%elfedit}") + fi + done + + # toolchains in the PATH environment + while read -r c; do + if [[ ${c} == *-elfedit ]]; then + keywords+=("${c%elfedit}") + fi + done < <(compgen -c) + + COMPREPLY=() + _filedir -d + + # Add cross_compile directly without passing it to compgen. + # Otherwise, toolchain paths with a tilde do not work. + # e.g.) + # CROSS_COMPILE=~/0day/gcc-14.2.0-nolibc/aarch64-linux/bin/aarch64-linux- + COMPREPLY+=("${cross_compile[@]}") + ;; + LLVM) + # LLVM=1 uses the default 'clang' etc. + keywords+=(1) + + # suffix for a particular version. LLVM=-18 uses 'clang-18' etc. + while read -r c; do + if [[ ${c} == clang-[0-9]* ]]; then + keywords+=("${c#clang}") + fi + done < <(compgen -c) + + # directory path to LLVM toolchains + _filedir -d + ;; + KCONFIG_ALLCONFIG) + # KCONFIG_ALLCONFIG=1 selects the default fragment + keywords+=(1) + # or the path to a fragment file + _filedir + ;; + C | KBUILD_CHECKSRC) + keywords+=(1 2) + ;; + V | KBUILD_VERBOSE) + keywords+=({,1}{,2}) + ;; + W | KBUILD_EXTRA_WARN) + keywords+=({,1}{,2}{,3}{,c}{,e}) + ;; + KBUILD_ABS_SRCTREE | KBUILD_MODPOST_NOFINAL | KBUILD_MODPOST_WARN | \ + CLIPPY | KBUILD_CLIPPY | KCONFIG_NOSILENTUPDATE | \ + KCONFIG_OVERWRITECONFIG | KCONFIG_WARN_UNKNOWN_SYMBOL | \ + KCONFIG_WERROR ) + keywords+=(1) + ;; + INSTALL_MOD_STRIP) + keywords+=(1 --strip-debug --strip-unneeded) + ;; + O | KBUILD_OUTPUT | M | KBUILD_EXTMOD | MO | KBUILD_EXTMOD_OUTPUT | *_PATH) + # variables that take a directory. + _filedir -d + return + ;; + KBUILD_EXTRA_SYMBOL | KBUILD_KCONFIG | KCONFIG_CONFIG) + # variables that take a file. + _filedir + return + esac + + COMPREPLY+=($(compgen -W "${keywords[*]}" -- "${cur}")) +} + +# Check the -C, -f options and 'source' symlink. Return the source tree we are +# working in. +__kbuild_get_srctree() +{ + local words=("$@") + local cwd makef_dir + + # see if a path was specified with -C/--directory + for ((i = 1; i < ${#words[@]}; i++)); do + if [[ ${words[i]} == -@(C|-directory) ]]; then + # eval for tilde expansion. + # suppress error, as this fails when it contains a space + eval "cwd=${words[i + 1]}" 2>/dev/null + break + fi + done + + if [[ -z ${cwd} ]]; then + cwd=. + fi + + # see if a Makefile was specified with -f/--file/--makefile + for ((i = 1; i < ${#words[@]}; i++)); do + if [[ ${words[i]} == -@(f|-?(make)file) ]]; then + # eval for tilde expansion + # suppress error, as this fails when it contains a space + eval "makef_dir=${words[i + 1]%/*}" 2>/dev/null + break + fi + done + + if [ -z "${makef_dir}" ]; then + makef_dir=${cwd} + elif [[ ${makef_dir} != /* ]]; then + makef_dir=${cwd}/${makef_dir} + fi + + # If ${makef_dir} is a build directory created by the O= option, there + # is a symbolic link 'source', which points to the kernel source tree. + if [[ -L ${makef_dir}/source ]]; then + makef_dir=$(readlink "${makef_dir}/source") + fi + + echo "${makef_dir}" +} + +# Get SRCARCH to do a little more clever things +__kbuild_get_srcarch() +{ + local words=("$@") + local arch srcarch uname_m + + # see if ARCH= is explicitly specified + for ((i = 1; i < ${#words[@]}; i++)); do + if [[ ${words[i]} == ARCH=* ]]; then + arch=${words[i]#ARCH=} + break + fi + done + + # If ARCH= is not specified, check the build marchine's architecture + if [[ -z ${arch} ]]; then + uname_m=$(uname -m) + + # shellcheck disable=SC2209 # 'sh' is SuperH, not a shell command + case ${uname_m} in + arm64 | aarch64*) arch=arm64 ;; + arm* | sa110) arch=arm ;; + i?86 | x86_64) arch=x86 ;; + loongarch*) arch=loongarch ;; + mips*) arch=mips ;; + ppc*) arch=powerpc ;; + riscv*) arch=riscv ;; + s390x) arch=s390 ;; + sh[234]*) arch=sh ;; + sun4u) arch=sparc64 ;; + *) arch=${uname_m} ;; + esac + fi + + case ${arch} in + parisc64) srcarch=parisc ;; + sparc32 | sparc64) srcarch=sparc ;; + i386 | x86_64) srcarch=x86 ;; + *) srcarch=${arch} ;; + esac + + echo "$srcarch" +} + +# small Makefile to parse obj-* syntax +__kbuild_tmp_makefile() +{ +cat <<'EOF' +.PHONY: __default +__default: + $(foreach m,$(obj-y) $(obj-m) $(obj-),$(foreach s, -objs -y -m -,$($(m:%.o=%$s))) $(m)) +EOF +echo "include ${1}" +} + +_make_for_kbuild () +{ + # shellcheck disable=SC2034 # these are set by _init_completion + local cur prev words cword split + _init_completion -s || return + + local srctree + srctree=$(__kbuild_get_srctree "${words[@]}") + + # If 'kernel' and 'Documentation' directories are found, we assume this + # is a kernel tree. Otherwise, we fall back to the generic rule provided + # by the bash-completion project. + if [[ ! -d ${srctree}/kernel || ! -d ${srctree}/Documentation ]]; then + if [ -n "${__kbuild_default_make_completion}" ]; then + "${__kbuild_default_make_completion}" "$@" + fi + return + fi + + # make options with a parameter (copied from the bash-completion project) + case ${prev} in + --file | --makefile | --old-file | --assume-old | --what-if | --new-file | \ + --assume-new | -!(-*)[foW]) + _filedir + return + ;; + --include-dir | --directory | -!(-*)[ICm]) + _filedir -d + return + ;; + -!(-*)E) + COMPREPLY=($(compgen -v -- "$cur")) + return + ;; + --eval | -!(-*)[DVx]) + return + ;; + --jobs | -!(-*)j) + COMPREPLY=($(compgen -W "{1..$(($(_ncpus) * 2))}" -- "$cur")) + return + ;; + esac + + local keywords=() + + case ${cur} in + -*) + # make options (copied from the bash-completion project) + local opts + opts="$(_parse_help "$1")" + COMPREPLY=($(compgen -W "${opts:-$(_parse_usage "$1")}" -- "$cur")) + if [[ ${COMPREPLY-} == *= ]]; then + compopt -o nospace + fi + return + ;; + *=*) + __kbuild_handle_variable "${cur}" "${srctree}" + return + ;; + KBUILD_*) + # There are many variables prefixed with 'KBUILD_'. + # Display them only when 'KBUILD_' is entered. + # shellcheck disable=SC2191 # '=' is appended for variables + keywords+=( + KBUILD_{CHECKSRC,EXTMOD,EXTMOD_OUTPUT,OUTPUT,VERBOSE,EXTRA_WARN,CLIPPY}= + KBUILD_BUILD_{USER,HOST,TIMESTAMP}= + KBUILD_MODPOST_{NOFINAL,WARN}= + KBUILD_{ABS_SRCTREE,EXTRA_SYMBOLS,KCONFIG}= + ) + ;; + KCONFIG_*) + # There are many variables prefixed with 'KCONFIG_'. + # Display them only when 'KCONFIG_' is entered. + # shellcheck disable=SC2191 # '=' is appended for variables + keywords+=( + KCONFIG_{CONFIG,ALLCONFIG,NOSILENTUPDATE,OVERWRITECONFIG}= + KCONFIG_{SEED,PROBABILITY}= + KCONFIG_WARN_UNKNOWN_SYMBOL= + KCONFIG_WERROR= + ) + ;; + *) + # By default, hide KBUILD_* and KCONFIG_* variables. + # Instead, display only the prefix parts. + keywords+=(KBUILD_ KCONFIG_) + ;; + esac + + if [[ ${cur} != /* && ${cur} != *//* ]]; then + local dir srcarch kbuild_file tmp + srcarch=$(__kbuild_get_srcarch "${words[@]}") + + # single build + dir=${cur} + while true; do + if [[ ${dir} == */* ]]; then + dir=${dir%/*} + else + dir=. + fi + + # Search for 'Kbuild' or 'Makefile' in the parent + # directories (may not be a direct parent) + if [[ -f ${srctree}/${dir}/Kbuild ]]; then + kbuild_file=${srctree}/${dir}/Kbuild + break + fi + if [[ -f ${srctree}/${dir}/Makefile ]]; then + kbuild_file=${srctree}/${dir}/Makefile + break + fi + + if [[ ${dir} == . ]]; then + break + fi + done + + if [[ -n ${kbuild_file} ]]; then + tmp=($(__kbuild_tmp_makefile "${kbuild_file}" | + SRCARCH=${srcarch} obj=${dir} src=${srctree}/${dir} \ + "${1}" -n -f - 2>/dev/null)) + + # Add $(obj)/ prefix + if [[ ${dir} != . ]]; then + tmp=("${tmp[@]/#/${dir}\/}") + fi + + keywords+=("${tmp[@]}") + fi + + # *_defconfig and *.config files. These might be grouped into + # subdirectories, e.g., arch/powerpc/configs/*/*_defconfig. + if [[ ${cur} == */* ]]; then + dir=${cur%/*} + else + dir=. + fi + + tmp=($(find "${srctree}/arch/${srcarch}/configs/${dir}" \ + "${srctree}/kernel/configs/${dir}" \ + -mindepth 1 -maxdepth 1 -type d -printf '%P/\n' \ + -o -printf '%P\n' 2>/dev/null)) + + if [[ ${dir} != . ]]; then + tmp=("${tmp[@]/#/${dir}\/}") + fi + + keywords+=("${tmp[@]}") + fi + + # shellcheck disable=SC2191 # '=' is appended for variables + keywords+=( + # + # variables (append =) + # + ARCH= + CROSS_COMPILE= + LLVM= + C= M= MO= O= V= W= + INSTALL{,_MOD,_HDR,_DTBS}_PATH= + KERNELRELEASE= + + # + # targets + # + all help + clean mrproper distclean + clang-{tidy,analyzer} compile_commands.json + coccicheck + dtbs{,_check,_install} dt_binding_{check,schemas} + headers{,_install} + vmlinux install + modules{,_prepare,_install,_sign} + vdso_install + tags TAGS cscope gtags + rust{available,fmt,fmtcheck} + kernel{version,release} image_name + kselftest{,-all,-install,-clean,-merge} + + # configuration + {,old,olddef,sync,def,savedef,rand,listnew,helpnew,test,tiny}config + {,build_}{menu,n,g,x}config + local{mod,yes}config + all{no,yes,mod,def}config + {yes2mod,mod2yes,mod2no}config + + # docs + {html,textinfo,info,latex,pdf,epub,xml,linkcheck,refcheck,clean}docs + + # package + {,bin,src}{rpm,deb}-pkg + {pacman,dir,tar}-pkg + tar{,gz,bz2,xz,zst}-pkg + perf-tar{,gz,bz2,xz,zst}-src-pkg + ) + + COMPREPLY=($(compgen -W "${keywords[*]}" -- "${cur}")) + + # Do not append a space for variables, subdirs, "KBUILD_", "KCONFIG_". + if [[ ${COMPREPLY-} == *[=/] || ${COMPREPLY-} =~ ^(KBUILD|KCONFIG)_$ ]]; then + compopt -o nospace + fi + +} && complete -F _make_for_kbuild make -- cgit v1.3.1