From cf9610f9116d55c5a66ef9f1faecacabd93a9322 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Mon, 24 Aug 2026 08:46:03 -0700 Subject: Merge tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control updates from Linus Walleij: "Core changes: - Use the non-blocking mux_state_try_select() in the generic MUX pin control back-end - Free pin maps on pinctrl_generic_to_map() failure in the core helpers New hardware pin control: - Qualcomm Maili TLMM SoC, PMG1110 PMIC, and Eliza LPASS LPI TLMM SoC (this is for the low power audio, LPASS = Low Power Audio SubSystem portions) - Upboard support on top of the Intel pin controller - Apple T6030 and T6031 support (just compatible strings) - Samsung Exynos 8855 SoC - Mediatek MT6858 SoC - Rockchip RK3308B and RV1106 SoCs - Airoha EN7523 and AN7563 SoCs Improvements: - Qualcomm TLMM GPIOs are unconditionally marked as wakeup capable - Qualcomm improvements on top of the Qualcomm PDC (power domain controller) irqchip improvements from tglx:s tree - Qualcomm IPQ806x and IPQ9650 non-urgent pin grop fixups - The NPCM8xx driver has been put into shape fixing many pin and group definitions - Some non-urgent Tegra 264 pin assignments are fixed up - Some non-urgent fixups to Airoha AN7581 and AN7583 registers and pin assignments, missing features etc" * tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (130 commits) dt-bindings: pinctrl: Convert TI DA850 pupd to DT schema pinctrl: meson: sync some modify from A4 pinctrl: meson: a4: Add input enable pin configuration pinctrl: realtek: rtd1625: remove unused group name spdif_sel pinctrl: realtek: rtd1625: fix base_bit for VE4 GPIO 13 dt-bindings: pinctrl: microchip,pic32mzda-pinctrl: Convert to DT schema Revert "Merge branch 'ib-rsk7204' into devel" pinctrl: rockchip: Add RV1106 pinctrl support dt-bindings: pinctrl: rockchip: Add RV1106 compatible pinctrl: rockchip: Decode drive strength in the get function pinctrl: fix PINCTRL_GENERIC_MUX not always being selectable pinctrl: airoha: add support of an7563 SoC dt-bindings: pinctrl: airoha: add support of an7563 pin controller pinctrl: airoha: try to find chip scu node by phandle first pinctrl: airoha: add support of en7523 SoC dt-bindings: pinctrl: airoha: add support of en7523 pin controller pinctrl: airoha: an7583: add support for olt pinmux pinctrl: airoha: an7583: add support for pon_alt pinmux pinctrl: airoha: an7583: add support for npu_uart pinmux dt-bindings: pinctrl: airoha: an7583: add missed features ... --- samples/kfifo/dma-example.c | 144 ++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 144 insertions(+) create mode 100644 samples/kfifo/dma-example.c (limited to 'samples/kfifo/dma-example.c') diff --git a/samples/kfifo/dma-example.c b/samples/kfifo/dma-example.c new file mode 100644 index 000000000..8076ac410 --- /dev/null +++ b/samples/kfifo/dma-example.c @@ -0,0 +1,144 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Sample fifo dma implementation + * + * Copyright (C) 2010 Stefani Seibold + */ + +#include +#include +#include +#include +#include + +/* + * This module shows how to handle fifo dma operations. + */ + +/* fifo size in elements (bytes) */ +#define FIFO_SIZE 32 + +static struct kfifo fifo; + +static int __init example_init(void) +{ + int i; + unsigned int ret; + unsigned int nents; + struct scatterlist sg[10]; + + printk(KERN_INFO "DMA fifo test start\n"); + + if (kfifo_alloc(&fifo, FIFO_SIZE, GFP_KERNEL)) { + printk(KERN_WARNING "error kfifo_alloc\n"); + return -ENOMEM; + } + + printk(KERN_INFO "queue size: %u\n", kfifo_size(&fifo)); + + kfifo_in(&fifo, "test", 4); + + for (i = 0; i != 9; i++) + kfifo_put(&fifo, i); + + /* kick away first byte */ + kfifo_skip(&fifo); + + printk(KERN_INFO "queue len: %u\n", kfifo_len(&fifo)); + + /* + * Configure the kfifo buffer to receive data from DMA input. + * + * .--------------------------------------. + * | 0 | 1 | 2 | ... | 12 | 13 | ... | 31 | + * |---|------------------|---------------| + * \_/ \________________/ \_____________/ + * \ \ \ + * \ \_allocated data \ + * \_*free space* \_*free space* + * + * We need two different SG entries: one for the free space area at the + * end of the kfifo buffer (19 bytes) and another for the first free + * byte at the beginning, after the kfifo_skip(). + */ + sg_init_table(sg, ARRAY_SIZE(sg)); + nents = kfifo_dma_in_prepare(&fifo, sg, ARRAY_SIZE(sg), FIFO_SIZE); + printk(KERN_INFO "DMA sgl entries: %d\n", nents); + if (!nents) { + /* fifo is full and no sgl was created */ + printk(KERN_WARNING "error kfifo_dma_in_prepare\n"); + return -EIO; + } + + /* receive data */ + printk(KERN_INFO "scatterlist for receive:\n"); + for (i = 0; i < nents; i++) { + printk(KERN_INFO + "sg[%d] -> " + "page %p offset 0x%.8x length 0x%.8x\n", + i, sg_page(&sg[i]), sg[i].offset, sg[i].length); + + if (sg_is_last(&sg[i])) + break; + } + + /* put here your code to setup and exectute the dma operation */ + /* ... */ + + /* example: zero bytes received */ + ret = 0; + + /* finish the dma operation and update the received data */ + kfifo_dma_in_finish(&fifo, ret); + + /* Prepare to transmit data, example: 8 bytes */ + nents = kfifo_dma_out_prepare(&fifo, sg, ARRAY_SIZE(sg), 8); + printk(KERN_INFO "DMA sgl entries: %d\n", nents); + if (!nents) { + /* no data was available and no sgl was created */ + printk(KERN_WARNING "error kfifo_dma_out_prepare\n"); + return -EIO; + } + + printk(KERN_INFO "scatterlist for transmit:\n"); + for (i = 0; i < nents; i++) { + printk(KERN_INFO + "sg[%d] -> " + "page %p offset 0x%.8x length 0x%.8x\n", + i, sg_page(&sg[i]), sg[i].offset, sg[i].length); + + if (sg_is_last(&sg[i])) + break; + } + + /* put here your code to setup and exectute the dma operation */ + /* ... */ + + /* example: 5 bytes transmitted */ + ret = 5; + + /* finish the dma operation and update the transmitted data */ + kfifo_dma_out_finish(&fifo, ret); + + ret = kfifo_len(&fifo); + printk(KERN_INFO "queue len: %u\n", kfifo_len(&fifo)); + + if (ret != 7) { + printk(KERN_WARNING "size mismatch: test failed"); + return -EIO; + } + printk(KERN_INFO "test passed\n"); + + return 0; +} + +static void __exit example_exit(void) +{ + kfifo_free(&fifo); +} + +module_init(example_init); +module_exit(example_exit); +MODULE_DESCRIPTION("Sample fifo dma implementation"); +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Stefani Seibold "); -- cgit v1.3.1