From cf9610f9116d55c5a66ef9f1faecacabd93a9322 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Mon, 24 Aug 2026 08:46:03 -0700 Subject: Merge tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control updates from Linus Walleij: "Core changes: - Use the non-blocking mux_state_try_select() in the generic MUX pin control back-end - Free pin maps on pinctrl_generic_to_map() failure in the core helpers New hardware pin control: - Qualcomm Maili TLMM SoC, PMG1110 PMIC, and Eliza LPASS LPI TLMM SoC (this is for the low power audio, LPASS = Low Power Audio SubSystem portions) - Upboard support on top of the Intel pin controller - Apple T6030 and T6031 support (just compatible strings) - Samsung Exynos 8855 SoC - Mediatek MT6858 SoC - Rockchip RK3308B and RV1106 SoCs - Airoha EN7523 and AN7563 SoCs Improvements: - Qualcomm TLMM GPIOs are unconditionally marked as wakeup capable - Qualcomm improvements on top of the Qualcomm PDC (power domain controller) irqchip improvements from tglx:s tree - Qualcomm IPQ806x and IPQ9650 non-urgent pin grop fixups - The NPCM8xx driver has been put into shape fixing many pin and group definitions - Some non-urgent Tegra 264 pin assignments are fixed up - Some non-urgent fixups to Airoha AN7581 and AN7583 registers and pin assignments, missing features etc" * tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (130 commits) dt-bindings: pinctrl: Convert TI DA850 pupd to DT schema pinctrl: meson: sync some modify from A4 pinctrl: meson: a4: Add input enable pin configuration pinctrl: realtek: rtd1625: remove unused group name spdif_sel pinctrl: realtek: rtd1625: fix base_bit for VE4 GPIO 13 dt-bindings: pinctrl: microchip,pic32mzda-pinctrl: Convert to DT schema Revert "Merge branch 'ib-rsk7204' into devel" pinctrl: rockchip: Add RV1106 pinctrl support dt-bindings: pinctrl: rockchip: Add RV1106 compatible pinctrl: rockchip: Decode drive strength in the get function pinctrl: fix PINCTRL_GENERIC_MUX not always being selectable pinctrl: airoha: add support of an7563 SoC dt-bindings: pinctrl: airoha: add support of an7563 pin controller pinctrl: airoha: try to find chip scu node by phandle first pinctrl: airoha: add support of en7523 SoC dt-bindings: pinctrl: airoha: add support of en7523 pin controller pinctrl: airoha: an7583: add support for olt pinmux pinctrl: airoha: an7583: add support for pon_alt pinmux pinctrl: airoha: an7583: add support for npu_uart pinmux dt-bindings: pinctrl: airoha: an7583: add missed features ... --- samples/check-exec/inc.c | 212 +++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 212 insertions(+) create mode 100644 samples/check-exec/inc.c (limited to 'samples/check-exec/inc.c') diff --git a/samples/check-exec/inc.c b/samples/check-exec/inc.c new file mode 100644 index 000000000..7f6ef06a2 --- /dev/null +++ b/samples/check-exec/inc.c @@ -0,0 +1,212 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Very simple script interpreter that can evaluate two different commands (one + * per line): + * - "?" to initialize a counter from user's input; + * - "+" to increment the counter (which is set to 0 by default). + * + * See tools/testing/selftests/exec/check-exec-tests.sh and + * Documentation/userspace-api/check_exec.rst + * + * Copyright © 2024 Microsoft Corporation + */ + +#define _GNU_SOURCE +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +static int sys_execveat(int dirfd, const char *pathname, char *const argv[], + char *const envp[], int flags) +{ + return syscall(__NR_execveat, dirfd, pathname, argv, envp, flags); +} + +/* Returns 1 on error, 0 otherwise. */ +static int interpret_buffer(char *buffer, size_t buffer_size) +{ + char *line, *saveptr = NULL; + long long number = 0; + + /* Each command is the first character of a line. */ + saveptr = NULL; + line = strtok_r(buffer, "\n", &saveptr); + while (line) { + if (*line != '#' && strlen(line) != 1) { + fprintf(stderr, "# ERROR: Unknown string\n"); + return 1; + } + switch (*line) { + case '#': + /* Skips shebang and comments. */ + break; + case '+': + /* Increments and prints the number. */ + number++; + printf("%lld\n", number); + break; + case '?': + /* Reads integer from stdin. */ + fprintf(stderr, "> Enter new number: \n"); + if (scanf("%lld", &number) != 1) { + fprintf(stderr, + "# WARNING: Failed to read number from stdin\n"); + } + break; + default: + fprintf(stderr, "# ERROR: Unknown character '%c'\n", + *line); + return 1; + } + line = strtok_r(NULL, "\n", &saveptr); + } + return 0; +} + +/* Returns 1 on error, 0 otherwise. */ +static int interpret_stream(FILE *script, char *const script_name, + char *const *const envp, const bool restrict_stream) +{ + int err; + char *const script_argv[] = { script_name, NULL }; + char buf[128] = {}; + size_t buf_size = sizeof(buf); + + /* + * We pass a valid argv and envp to the kernel to emulate a native + * script execution. We must use the script file descriptor instead of + * the script path name to avoid race conditions. + */ + err = sys_execveat(fileno(script), "", script_argv, envp, + AT_EMPTY_PATH | AT_EXECVE_CHECK); + if (err && restrict_stream) { + perror("ERROR: Script execution check"); + return 1; + } + + /* Reads script. */ + buf_size = fread(buf, 1, buf_size - 1, script); + return interpret_buffer(buf, buf_size); +} + +static void print_usage(const char *argv0) +{ + fprintf(stderr, "usage: %s | -i | -c \n\n", + argv0); + fprintf(stderr, "Example:\n"); + fprintf(stderr, " ./set-exec -fi -- ./inc -i < script-exec.inc\n"); +} + +int main(const int argc, char *const argv[], char *const *const envp) +{ + int opt; + char *cmd = NULL; + char *script_name = NULL; + bool interpret_stdin = false; + FILE *script_file = NULL; + int secbits; + bool deny_interactive, restrict_file; + size_t arg_nb; + + secbits = prctl(PR_GET_SECUREBITS); + if (secbits == -1) { + /* + * This should never happen, except with a buggy seccomp + * filter. + */ + perror("ERROR: Failed to get securebits"); + return 1; + } + + deny_interactive = !!(secbits & SECBIT_EXEC_DENY_INTERACTIVE); + restrict_file = !!(secbits & SECBIT_EXEC_RESTRICT_FILE); + + while ((opt = getopt(argc, argv, "c:i")) != -1) { + switch (opt) { + case 'c': + if (cmd) { + fprintf(stderr, "ERROR: Command already set"); + return 1; + } + cmd = optarg; + break; + case 'i': + interpret_stdin = true; + break; + default: + print_usage(argv[0]); + return 1; + } + } + + /* Checks that only one argument is used, or read stdin. */ + arg_nb = !!cmd + !!interpret_stdin; + if (arg_nb == 0 && argc == 2) { + script_name = argv[1]; + } else if (arg_nb != 1) { + print_usage(argv[0]); + return 1; + } + + if (cmd) { + /* + * Other kind of interactive interpretations should be denied + * as well (e.g. CLI arguments passing script snippets, + * environment variables interpreted as script). However, any + * way to pass script files should only be restricted according + * to restrict_file. + */ + if (deny_interactive) { + fprintf(stderr, + "ERROR: Interactive interpretation denied.\n"); + return 1; + } + + return interpret_buffer(cmd, strlen(cmd)); + } + + if (interpret_stdin && !script_name) { + script_file = stdin; + /* + * As for any execve(2) call, this path may be logged by the + * kernel. + */ + script_name = "/proc/self/fd/0"; + /* + * When stdin is used, it can point to a regular file or a + * pipe. Restrict stdin execution according to + * SECBIT_EXEC_DENY_INTERACTIVE but always allow executable + * files (which are not considered as interactive inputs). + */ + return interpret_stream(script_file, script_name, envp, + deny_interactive); + } else if (script_name && !interpret_stdin) { + /* + * In this sample, we don't pass any argument to scripts, but + * otherwise we would have to forge an argv with such + * arguments. + */ + script_file = fopen(script_name, "r"); + if (!script_file) { + perror("ERROR: Failed to open script"); + return 1; + } + /* + * Restricts file execution according to + * SECBIT_EXEC_RESTRICT_FILE. + */ + return interpret_stream(script_file, script_name, envp, + restrict_file); + } + + print_usage(argv[0]); + return 1; +} -- cgit v1.3.1