From f4cdf7ca9a1fdcca413157df19753f388a5a224e Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Wed, 19 Aug 2026 10:09:22 -0700 Subject: Merge tag 'media/v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media updates from Mauro Carvalho Chehab: - v4l2-core: added ISP statistics support and per-block validation - v4l2-core: Allow unknown HDR10 white point and luminance - New camera sensors: Sony IMX678 and IMX471m, Himax HM1092 IR sensor - New codec: Milos: VPU v2.0 codec support - isp driver: gained support for Dreamchip RPPX1 ISP framework - vsp1 driver: gained support for RZ/T2H and RZ/N2H - Novalake driver: gained CVS support for new NVL hardware - dvb-core: fix feed leak on failed DMX_ADD_PID - several driver fixes, cleanups and minor improvements * tag 'media/v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (308 commits) media: ipu-bridge: check all DMI entries when overriding sensor rotation media: v4l2-async: avoid deleting unlinked ASC entry on link error media: rzg2l-cru: Align bytesperline to hardware DMA stride requirement media: intel/ipu6: fix async notifier cleanup leak on parse error media: staging/ipu7: fix async notifier UAF on probe error path media: amd: isp4: fix self-deadlock in isp4sd_pwron_and_init() error path media: amd: isp4: release partial allocations in isp4if_alloc_fw_gpumem() media: rcar-isp: Fix VSPX reference leaks media: rcar-isp: Release ISPCORE resources media: i2c: imx415: Release runtime PM reference on VBLANK error media: i2c: imx415: Return test pattern write errors media: renesas: vsp1: Declare index variables in for loop statement media: renesas: vsp1: Make reset control optional to support platforms without a reset line media: dt-bindings: media: renesas,vsp1: Document RZ/T2H and RZ/N2H SoCs media: dt-bindings: media: renesas,fcp: Document RZ/T2H and RZ/N2H SoCs media: nxp: imx8-isi: Add additional 32-bit RGB format support media: nxp: imx8-isi: Add 16-bit raw Bayer format support media: nxp: imx8-isi: Implement per-stream reference counting for multiplexed streams media: nxp: imx8-isi: Use BIT_ULL() for 64-bit stream masks media: nxp: imx8-isi: Correct color map between V4L2 and ISI ... --- net/ethtool/plca.c | 271 +++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 271 insertions(+) create mode 100644 net/ethtool/plca.c (limited to 'net/ethtool/plca.c') diff --git a/net/ethtool/plca.c b/net/ethtool/plca.c new file mode 100644 index 000000000..91f0c4233 --- /dev/null +++ b/net/ethtool/plca.c @@ -0,0 +1,271 @@ +// SPDX-License-Identifier: GPL-2.0-only + +#include +#include + +#include "common.h" +#include "netlink.h" + +struct plca_req_info { + struct ethnl_req_info base; +}; + +struct plca_reply_data { + struct ethnl_reply_data base; + struct phy_plca_cfg plca_cfg; + struct phy_plca_status plca_st; +}; + +// Helpers ------------------------------------------------------------------ // + +#define PLCA_REPDATA(__reply_base) \ + container_of(__reply_base, struct plca_reply_data, base) + +// PLCA get configuration message ------------------------------------------- // + +const struct nla_policy ethnl_plca_get_cfg_policy[] = { + [ETHTOOL_A_PLCA_HEADER] = + NLA_POLICY_NESTED(ethnl_header_policy_phy), +}; + +static void plca_update_sint(int *dst, struct nlattr **tb, u32 attrid, + bool *mod) +{ + const struct nlattr *attr = tb[attrid]; + + if (!attr || + WARN_ON_ONCE(attrid >= ARRAY_SIZE(ethnl_plca_set_cfg_policy))) + return; + + switch (ethnl_plca_set_cfg_policy[attrid].type) { + case NLA_U8: + *dst = nla_get_u8(attr); + break; + case NLA_U32: + *dst = nla_get_u32(attr); + break; + default: + WARN_ON_ONCE(1); + } + + *mod = true; +} + +static int plca_get_cfg_prepare_data(const struct ethnl_req_info *req_base, + struct ethnl_reply_data *reply_base, + const struct genl_info *info) +{ + struct plca_reply_data *data = PLCA_REPDATA(reply_base); + struct net_device *dev = reply_base->dev; + const struct ethtool_phy_ops *ops; + struct nlattr **tb = info->attrs; + struct phy_device *phydev; + int ret; + + phydev = ethnl_req_get_phydev(req_base, tb, ETHTOOL_A_PLCA_HEADER, + info->extack); + // check that the PHY device is available and connected + if (IS_ERR_OR_NULL(phydev)) { + ret = -EOPNOTSUPP; + goto out; + } + + // note: rtnl_lock is held already by ethnl_default_doit + ops = ethtool_phy_ops; + if (!ops || !ops->get_plca_cfg) { + ret = -EOPNOTSUPP; + goto out; + } + + ret = ethnl_ops_begin(dev); + if (ret < 0) + goto out; + + memset(&data->plca_cfg, 0xff, + sizeof_field(struct plca_reply_data, plca_cfg)); + + ret = ops->get_plca_cfg(phydev, &data->plca_cfg); + ethnl_ops_complete(dev); + +out: + return ret; +} + +static int plca_get_cfg_reply_size(const struct ethnl_req_info *req_base, + const struct ethnl_reply_data *reply_base) +{ + return nla_total_size(sizeof(u16)) + /* _VERSION */ + nla_total_size(sizeof(u8)) + /* _ENABLED */ + nla_total_size(sizeof(u32)) + /* _NODE_CNT */ + nla_total_size(sizeof(u32)) + /* _NODE_ID */ + nla_total_size(sizeof(u32)) + /* _TO_TIMER */ + nla_total_size(sizeof(u32)) + /* _BURST_COUNT */ + nla_total_size(sizeof(u32)); /* _BURST_TIMER */ +} + +static int plca_get_cfg_fill_reply(struct sk_buff *skb, + const struct ethnl_req_info *req_base, + const struct ethnl_reply_data *reply_base) +{ + const struct plca_reply_data *data = PLCA_REPDATA(reply_base); + const struct phy_plca_cfg *plca = &data->plca_cfg; + + if ((plca->version >= 0 && + nla_put_u16(skb, ETHTOOL_A_PLCA_VERSION, plca->version)) || + (plca->enabled >= 0 && + nla_put_u8(skb, ETHTOOL_A_PLCA_ENABLED, !!plca->enabled)) || + (plca->node_id >= 0 && + nla_put_u32(skb, ETHTOOL_A_PLCA_NODE_ID, plca->node_id)) || + (plca->node_cnt >= 0 && + nla_put_u32(skb, ETHTOOL_A_PLCA_NODE_CNT, plca->node_cnt)) || + (plca->to_tmr >= 0 && + nla_put_u32(skb, ETHTOOL_A_PLCA_TO_TMR, plca->to_tmr)) || + (plca->burst_cnt >= 0 && + nla_put_u32(skb, ETHTOOL_A_PLCA_BURST_CNT, plca->burst_cnt)) || + (plca->burst_tmr >= 0 && + nla_put_u32(skb, ETHTOOL_A_PLCA_BURST_TMR, plca->burst_tmr))) + return -EMSGSIZE; + + return 0; +}; + +// PLCA set configuration message ------------------------------------------- // + +const struct nla_policy ethnl_plca_set_cfg_policy[] = { + [ETHTOOL_A_PLCA_HEADER] = + NLA_POLICY_NESTED(ethnl_header_policy_phy), + [ETHTOOL_A_PLCA_ENABLED] = NLA_POLICY_MAX(NLA_U8, 1), + [ETHTOOL_A_PLCA_NODE_ID] = NLA_POLICY_MAX(NLA_U32, 255), + [ETHTOOL_A_PLCA_NODE_CNT] = NLA_POLICY_RANGE(NLA_U32, 1, 255), + [ETHTOOL_A_PLCA_TO_TMR] = NLA_POLICY_MAX(NLA_U32, 255), + [ETHTOOL_A_PLCA_BURST_CNT] = NLA_POLICY_MAX(NLA_U32, 255), + [ETHTOOL_A_PLCA_BURST_TMR] = NLA_POLICY_MAX(NLA_U32, 255), +}; + +static int +ethnl_set_plca(struct ethnl_req_info *req_info, struct genl_info *info) +{ + const struct ethtool_phy_ops *ops; + struct nlattr **tb = info->attrs; + struct phy_plca_cfg plca_cfg; + struct phy_device *phydev; + bool mod = false; + int ret; + + phydev = ethnl_req_get_phydev(req_info, tb, ETHTOOL_A_PLCA_HEADER, + info->extack); + // check that the PHY device is available and connected + if (IS_ERR_OR_NULL(phydev)) + return -EOPNOTSUPP; + + ops = ethtool_phy_ops; + if (!ops || !ops->set_plca_cfg) + return -EOPNOTSUPP; + + memset(&plca_cfg, 0xff, sizeof(plca_cfg)); + plca_update_sint(&plca_cfg.enabled, tb, ETHTOOL_A_PLCA_ENABLED, &mod); + plca_update_sint(&plca_cfg.node_id, tb, ETHTOOL_A_PLCA_NODE_ID, &mod); + plca_update_sint(&plca_cfg.node_cnt, tb, ETHTOOL_A_PLCA_NODE_CNT, &mod); + plca_update_sint(&plca_cfg.to_tmr, tb, ETHTOOL_A_PLCA_TO_TMR, &mod); + plca_update_sint(&plca_cfg.burst_cnt, tb, ETHTOOL_A_PLCA_BURST_CNT, + &mod); + plca_update_sint(&plca_cfg.burst_tmr, tb, ETHTOOL_A_PLCA_BURST_TMR, + &mod); + if (!mod) + return 0; + + ret = ops->set_plca_cfg(phydev, &plca_cfg, info->extack); + return ret < 0 ? ret : 1; +} + +const struct ethnl_request_ops ethnl_plca_cfg_request_ops = { + .request_cmd = ETHTOOL_MSG_PLCA_GET_CFG, + .reply_cmd = ETHTOOL_MSG_PLCA_GET_CFG_REPLY, + .hdr_attr = ETHTOOL_A_PLCA_HEADER, + .req_info_size = sizeof(struct plca_req_info), + .reply_data_size = sizeof(struct plca_reply_data), + + .prepare_data = plca_get_cfg_prepare_data, + .reply_size = plca_get_cfg_reply_size, + .fill_reply = plca_get_cfg_fill_reply, + + .set = ethnl_set_plca, + .set_ntf_cmd = ETHTOOL_MSG_PLCA_NTF, +}; + +// PLCA get status message -------------------------------------------------- // + +const struct nla_policy ethnl_plca_get_status_policy[] = { + [ETHTOOL_A_PLCA_HEADER] = + NLA_POLICY_NESTED(ethnl_header_policy_phy), +}; + +static int plca_get_status_prepare_data(const struct ethnl_req_info *req_base, + struct ethnl_reply_data *reply_base, + const struct genl_info *info) +{ + struct plca_reply_data *data = PLCA_REPDATA(reply_base); + struct net_device *dev = reply_base->dev; + const struct ethtool_phy_ops *ops; + struct nlattr **tb = info->attrs; + struct phy_device *phydev; + int ret; + + phydev = ethnl_req_get_phydev(req_base, tb, ETHTOOL_A_PLCA_HEADER, + info->extack); + // check that the PHY device is available and connected + if (IS_ERR_OR_NULL(phydev)) { + ret = -EOPNOTSUPP; + goto out; + } + + // note: rtnl_lock is held already by ethnl_default_doit + ops = ethtool_phy_ops; + if (!ops || !ops->get_plca_status) { + ret = -EOPNOTSUPP; + goto out; + } + + ret = ethnl_ops_begin(dev); + if (ret < 0) + goto out; + + memset(&data->plca_st, 0xff, + sizeof_field(struct plca_reply_data, plca_st)); + + ret = ops->get_plca_status(phydev, &data->plca_st); + ethnl_ops_complete(dev); +out: + return ret; +} + +static int plca_get_status_reply_size(const struct ethnl_req_info *req_base, + const struct ethnl_reply_data *reply_base) +{ + return nla_total_size(sizeof(u8)); /* _STATUS */ +} + +static int plca_get_status_fill_reply(struct sk_buff *skb, + const struct ethnl_req_info *req_base, + const struct ethnl_reply_data *reply_base) +{ + const struct plca_reply_data *data = PLCA_REPDATA(reply_base); + const u8 status = data->plca_st.pst; + + if (nla_put_u8(skb, ETHTOOL_A_PLCA_STATUS, !!status)) + return -EMSGSIZE; + + return 0; +}; + +const struct ethnl_request_ops ethnl_plca_status_request_ops = { + .request_cmd = ETHTOOL_MSG_PLCA_GET_STATUS, + .reply_cmd = ETHTOOL_MSG_PLCA_GET_STATUS_REPLY, + .hdr_attr = ETHTOOL_A_PLCA_HEADER, + .req_info_size = sizeof(struct plca_req_info), + .reply_data_size = sizeof(struct plca_reply_data), + + .prepare_data = plca_get_status_prepare_data, + .reply_size = plca_get_status_reply_size, + .fill_reply = plca_get_status_fill_reply, +}; -- cgit v1.3.1