From cf9610f9116d55c5a66ef9f1faecacabd93a9322 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Mon, 24 Aug 2026 08:46:03 -0700 Subject: Merge tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control updates from Linus Walleij: "Core changes: - Use the non-blocking mux_state_try_select() in the generic MUX pin control back-end - Free pin maps on pinctrl_generic_to_map() failure in the core helpers New hardware pin control: - Qualcomm Maili TLMM SoC, PMG1110 PMIC, and Eliza LPASS LPI TLMM SoC (this is for the low power audio, LPASS = Low Power Audio SubSystem portions) - Upboard support on top of the Intel pin controller - Apple T6030 and T6031 support (just compatible strings) - Samsung Exynos 8855 SoC - Mediatek MT6858 SoC - Rockchip RK3308B and RV1106 SoCs - Airoha EN7523 and AN7563 SoCs Improvements: - Qualcomm TLMM GPIOs are unconditionally marked as wakeup capable - Qualcomm improvements on top of the Qualcomm PDC (power domain controller) irqchip improvements from tglx:s tree - Qualcomm IPQ806x and IPQ9650 non-urgent pin grop fixups - The NPCM8xx driver has been put into shape fixing many pin and group definitions - Some non-urgent Tegra 264 pin assignments are fixed up - Some non-urgent fixups to Airoha AN7581 and AN7583 registers and pin assignments, missing features etc" * tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (130 commits) dt-bindings: pinctrl: Convert TI DA850 pupd to DT schema pinctrl: meson: sync some modify from A4 pinctrl: meson: a4: Add input enable pin configuration pinctrl: realtek: rtd1625: remove unused group name spdif_sel pinctrl: realtek: rtd1625: fix base_bit for VE4 GPIO 13 dt-bindings: pinctrl: microchip,pic32mzda-pinctrl: Convert to DT schema Revert "Merge branch 'ib-rsk7204' into devel" pinctrl: rockchip: Add RV1106 pinctrl support dt-bindings: pinctrl: rockchip: Add RV1106 compatible pinctrl: rockchip: Decode drive strength in the get function pinctrl: fix PINCTRL_GENERIC_MUX not always being selectable pinctrl: airoha: add support of an7563 SoC dt-bindings: pinctrl: airoha: add support of an7563 pin controller pinctrl: airoha: try to find chip scu node by phandle first pinctrl: airoha: add support of en7523 SoC dt-bindings: pinctrl: airoha: add support of en7523 pin controller pinctrl: airoha: an7583: add support for olt pinmux pinctrl: airoha: an7583: add support for pon_alt pinmux pinctrl: airoha: an7583: add support for npu_uart pinmux dt-bindings: pinctrl: airoha: an7583: add missed features ... --- net/ethtool/plca.c | 271 +++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 271 insertions(+) create mode 100644 net/ethtool/plca.c (limited to 'net/ethtool/plca.c') diff --git a/net/ethtool/plca.c b/net/ethtool/plca.c new file mode 100644 index 000000000..91f0c4233 --- /dev/null +++ b/net/ethtool/plca.c @@ -0,0 +1,271 @@ +// SPDX-License-Identifier: GPL-2.0-only + +#include +#include + +#include "common.h" +#include "netlink.h" + +struct plca_req_info { + struct ethnl_req_info base; +}; + +struct plca_reply_data { + struct ethnl_reply_data base; + struct phy_plca_cfg plca_cfg; + struct phy_plca_status plca_st; +}; + +// Helpers ------------------------------------------------------------------ // + +#define PLCA_REPDATA(__reply_base) \ + container_of(__reply_base, struct plca_reply_data, base) + +// PLCA get configuration message ------------------------------------------- // + +const struct nla_policy ethnl_plca_get_cfg_policy[] = { + [ETHTOOL_A_PLCA_HEADER] = + NLA_POLICY_NESTED(ethnl_header_policy_phy), +}; + +static void plca_update_sint(int *dst, struct nlattr **tb, u32 attrid, + bool *mod) +{ + const struct nlattr *attr = tb[attrid]; + + if (!attr || + WARN_ON_ONCE(attrid >= ARRAY_SIZE(ethnl_plca_set_cfg_policy))) + return; + + switch (ethnl_plca_set_cfg_policy[attrid].type) { + case NLA_U8: + *dst = nla_get_u8(attr); + break; + case NLA_U32: + *dst = nla_get_u32(attr); + break; + default: + WARN_ON_ONCE(1); + } + + *mod = true; +} + +static int plca_get_cfg_prepare_data(const struct ethnl_req_info *req_base, + struct ethnl_reply_data *reply_base, + const struct genl_info *info) +{ + struct plca_reply_data *data = PLCA_REPDATA(reply_base); + struct net_device *dev = reply_base->dev; + const struct ethtool_phy_ops *ops; + struct nlattr **tb = info->attrs; + struct phy_device *phydev; + int ret; + + phydev = ethnl_req_get_phydev(req_base, tb, ETHTOOL_A_PLCA_HEADER, + info->extack); + // check that the PHY device is available and connected + if (IS_ERR_OR_NULL(phydev)) { + ret = -EOPNOTSUPP; + goto out; + } + + // note: rtnl_lock is held already by ethnl_default_doit + ops = ethtool_phy_ops; + if (!ops || !ops->get_plca_cfg) { + ret = -EOPNOTSUPP; + goto out; + } + + ret = ethnl_ops_begin(dev); + if (ret < 0) + goto out; + + memset(&data->plca_cfg, 0xff, + sizeof_field(struct plca_reply_data, plca_cfg)); + + ret = ops->get_plca_cfg(phydev, &data->plca_cfg); + ethnl_ops_complete(dev); + +out: + return ret; +} + +static int plca_get_cfg_reply_size(const struct ethnl_req_info *req_base, + const struct ethnl_reply_data *reply_base) +{ + return nla_total_size(sizeof(u16)) + /* _VERSION */ + nla_total_size(sizeof(u8)) + /* _ENABLED */ + nla_total_size(sizeof(u32)) + /* _NODE_CNT */ + nla_total_size(sizeof(u32)) + /* _NODE_ID */ + nla_total_size(sizeof(u32)) + /* _TO_TIMER */ + nla_total_size(sizeof(u32)) + /* _BURST_COUNT */ + nla_total_size(sizeof(u32)); /* _BURST_TIMER */ +} + +static int plca_get_cfg_fill_reply(struct sk_buff *skb, + const struct ethnl_req_info *req_base, + const struct ethnl_reply_data *reply_base) +{ + const struct plca_reply_data *data = PLCA_REPDATA(reply_base); + const struct phy_plca_cfg *plca = &data->plca_cfg; + + if ((plca->version >= 0 && + nla_put_u16(skb, ETHTOOL_A_PLCA_VERSION, plca->version)) || + (plca->enabled >= 0 && + nla_put_u8(skb, ETHTOOL_A_PLCA_ENABLED, !!plca->enabled)) || + (plca->node_id >= 0 && + nla_put_u32(skb, ETHTOOL_A_PLCA_NODE_ID, plca->node_id)) || + (plca->node_cnt >= 0 && + nla_put_u32(skb, ETHTOOL_A_PLCA_NODE_CNT, plca->node_cnt)) || + (plca->to_tmr >= 0 && + nla_put_u32(skb, ETHTOOL_A_PLCA_TO_TMR, plca->to_tmr)) || + (plca->burst_cnt >= 0 && + nla_put_u32(skb, ETHTOOL_A_PLCA_BURST_CNT, plca->burst_cnt)) || + (plca->burst_tmr >= 0 && + nla_put_u32(skb, ETHTOOL_A_PLCA_BURST_TMR, plca->burst_tmr))) + return -EMSGSIZE; + + return 0; +}; + +// PLCA set configuration message ------------------------------------------- // + +const struct nla_policy ethnl_plca_set_cfg_policy[] = { + [ETHTOOL_A_PLCA_HEADER] = + NLA_POLICY_NESTED(ethnl_header_policy_phy), + [ETHTOOL_A_PLCA_ENABLED] = NLA_POLICY_MAX(NLA_U8, 1), + [ETHTOOL_A_PLCA_NODE_ID] = NLA_POLICY_MAX(NLA_U32, 255), + [ETHTOOL_A_PLCA_NODE_CNT] = NLA_POLICY_RANGE(NLA_U32, 1, 255), + [ETHTOOL_A_PLCA_TO_TMR] = NLA_POLICY_MAX(NLA_U32, 255), + [ETHTOOL_A_PLCA_BURST_CNT] = NLA_POLICY_MAX(NLA_U32, 255), + [ETHTOOL_A_PLCA_BURST_TMR] = NLA_POLICY_MAX(NLA_U32, 255), +}; + +static int +ethnl_set_plca(struct ethnl_req_info *req_info, struct genl_info *info) +{ + const struct ethtool_phy_ops *ops; + struct nlattr **tb = info->attrs; + struct phy_plca_cfg plca_cfg; + struct phy_device *phydev; + bool mod = false; + int ret; + + phydev = ethnl_req_get_phydev(req_info, tb, ETHTOOL_A_PLCA_HEADER, + info->extack); + // check that the PHY device is available and connected + if (IS_ERR_OR_NULL(phydev)) + return -EOPNOTSUPP; + + ops = ethtool_phy_ops; + if (!ops || !ops->set_plca_cfg) + return -EOPNOTSUPP; + + memset(&plca_cfg, 0xff, sizeof(plca_cfg)); + plca_update_sint(&plca_cfg.enabled, tb, ETHTOOL_A_PLCA_ENABLED, &mod); + plca_update_sint(&plca_cfg.node_id, tb, ETHTOOL_A_PLCA_NODE_ID, &mod); + plca_update_sint(&plca_cfg.node_cnt, tb, ETHTOOL_A_PLCA_NODE_CNT, &mod); + plca_update_sint(&plca_cfg.to_tmr, tb, ETHTOOL_A_PLCA_TO_TMR, &mod); + plca_update_sint(&plca_cfg.burst_cnt, tb, ETHTOOL_A_PLCA_BURST_CNT, + &mod); + plca_update_sint(&plca_cfg.burst_tmr, tb, ETHTOOL_A_PLCA_BURST_TMR, + &mod); + if (!mod) + return 0; + + ret = ops->set_plca_cfg(phydev, &plca_cfg, info->extack); + return ret < 0 ? ret : 1; +} + +const struct ethnl_request_ops ethnl_plca_cfg_request_ops = { + .request_cmd = ETHTOOL_MSG_PLCA_GET_CFG, + .reply_cmd = ETHTOOL_MSG_PLCA_GET_CFG_REPLY, + .hdr_attr = ETHTOOL_A_PLCA_HEADER, + .req_info_size = sizeof(struct plca_req_info), + .reply_data_size = sizeof(struct plca_reply_data), + + .prepare_data = plca_get_cfg_prepare_data, + .reply_size = plca_get_cfg_reply_size, + .fill_reply = plca_get_cfg_fill_reply, + + .set = ethnl_set_plca, + .set_ntf_cmd = ETHTOOL_MSG_PLCA_NTF, +}; + +// PLCA get status message -------------------------------------------------- // + +const struct nla_policy ethnl_plca_get_status_policy[] = { + [ETHTOOL_A_PLCA_HEADER] = + NLA_POLICY_NESTED(ethnl_header_policy_phy), +}; + +static int plca_get_status_prepare_data(const struct ethnl_req_info *req_base, + struct ethnl_reply_data *reply_base, + const struct genl_info *info) +{ + struct plca_reply_data *data = PLCA_REPDATA(reply_base); + struct net_device *dev = reply_base->dev; + const struct ethtool_phy_ops *ops; + struct nlattr **tb = info->attrs; + struct phy_device *phydev; + int ret; + + phydev = ethnl_req_get_phydev(req_base, tb, ETHTOOL_A_PLCA_HEADER, + info->extack); + // check that the PHY device is available and connected + if (IS_ERR_OR_NULL(phydev)) { + ret = -EOPNOTSUPP; + goto out; + } + + // note: rtnl_lock is held already by ethnl_default_doit + ops = ethtool_phy_ops; + if (!ops || !ops->get_plca_status) { + ret = -EOPNOTSUPP; + goto out; + } + + ret = ethnl_ops_begin(dev); + if (ret < 0) + goto out; + + memset(&data->plca_st, 0xff, + sizeof_field(struct plca_reply_data, plca_st)); + + ret = ops->get_plca_status(phydev, &data->plca_st); + ethnl_ops_complete(dev); +out: + return ret; +} + +static int plca_get_status_reply_size(const struct ethnl_req_info *req_base, + const struct ethnl_reply_data *reply_base) +{ + return nla_total_size(sizeof(u8)); /* _STATUS */ +} + +static int plca_get_status_fill_reply(struct sk_buff *skb, + const struct ethnl_req_info *req_base, + const struct ethnl_reply_data *reply_base) +{ + const struct plca_reply_data *data = PLCA_REPDATA(reply_base); + const u8 status = data->plca_st.pst; + + if (nla_put_u8(skb, ETHTOOL_A_PLCA_STATUS, !!status)) + return -EMSGSIZE; + + return 0; +}; + +const struct ethnl_request_ops ethnl_plca_status_request_ops = { + .request_cmd = ETHTOOL_MSG_PLCA_GET_STATUS, + .reply_cmd = ETHTOOL_MSG_PLCA_GET_STATUS_REPLY, + .hdr_attr = ETHTOOL_A_PLCA_HEADER, + .req_info_size = sizeof(struct plca_req_info), + .reply_data_size = sizeof(struct plca_reply_data), + + .prepare_data = plca_get_status_prepare_data, + .reply_size = plca_get_status_reply_size, + .fill_reply = plca_get_status_fill_reply, +}; -- cgit v1.3.1