From cf9610f9116d55c5a66ef9f1faecacabd93a9322 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Mon, 24 Aug 2026 08:46:03 -0700 Subject: Merge tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control updates from Linus Walleij: "Core changes: - Use the non-blocking mux_state_try_select() in the generic MUX pin control back-end - Free pin maps on pinctrl_generic_to_map() failure in the core helpers New hardware pin control: - Qualcomm Maili TLMM SoC, PMG1110 PMIC, and Eliza LPASS LPI TLMM SoC (this is for the low power audio, LPASS = Low Power Audio SubSystem portions) - Upboard support on top of the Intel pin controller - Apple T6030 and T6031 support (just compatible strings) - Samsung Exynos 8855 SoC - Mediatek MT6858 SoC - Rockchip RK3308B and RV1106 SoCs - Airoha EN7523 and AN7563 SoCs Improvements: - Qualcomm TLMM GPIOs are unconditionally marked as wakeup capable - Qualcomm improvements on top of the Qualcomm PDC (power domain controller) irqchip improvements from tglx:s tree - Qualcomm IPQ806x and IPQ9650 non-urgent pin grop fixups - The NPCM8xx driver has been put into shape fixing many pin and group definitions - Some non-urgent Tegra 264 pin assignments are fixed up - Some non-urgent fixups to Airoha AN7581 and AN7583 registers and pin assignments, missing features etc" * tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (130 commits) dt-bindings: pinctrl: Convert TI DA850 pupd to DT schema pinctrl: meson: sync some modify from A4 pinctrl: meson: a4: Add input enable pin configuration pinctrl: realtek: rtd1625: remove unused group name spdif_sel pinctrl: realtek: rtd1625: fix base_bit for VE4 GPIO 13 dt-bindings: pinctrl: microchip,pic32mzda-pinctrl: Convert to DT schema Revert "Merge branch 'ib-rsk7204' into devel" pinctrl: rockchip: Add RV1106 pinctrl support dt-bindings: pinctrl: rockchip: Add RV1106 compatible pinctrl: rockchip: Decode drive strength in the get function pinctrl: fix PINCTRL_GENERIC_MUX not always being selectable pinctrl: airoha: add support of an7563 SoC dt-bindings: pinctrl: airoha: add support of an7563 pin controller pinctrl: airoha: try to find chip scu node by phandle first pinctrl: airoha: add support of en7523 SoC dt-bindings: pinctrl: airoha: add support of en7523 pin controller pinctrl: airoha: an7583: add support for olt pinmux pinctrl: airoha: an7583: add support for pon_alt pinmux pinctrl: airoha: an7583: add support for npu_uart pinmux dt-bindings: pinctrl: airoha: an7583: add missed features ... --- net/can/Kconfig | 73 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 73 insertions(+) create mode 100644 net/can/Kconfig (limited to 'net/can/Kconfig') diff --git a/net/can/Kconfig b/net/can/Kconfig new file mode 100644 index 000000000..abbb4be7a --- /dev/null +++ b/net/can/Kconfig @@ -0,0 +1,73 @@ +# SPDX-License-Identifier: GPL-2.0-only +# +# Controller Area Network (CAN) network layer core configuration +# + +menuconfig CAN + tristate "CAN bus subsystem support" + select SKB_EXTENSIONS + help + Controller Area Network (CAN) is a slow (up to 1Mbit/s) serial + communications protocol. Development of the CAN bus started in + 1983 at Robert Bosch GmbH, and the protocol was officially + released in 1986. The CAN bus was originally mainly for automotive, + but is now widely used in marine (NMEA2000), industrial, and medical + applications. More information on the CAN network protocol family + PF_CAN is contained in . + + If you want CAN support you should say Y here and also to the + specific driver for your controller(s) under the Network device + support section. + +if CAN + +config CAN_RAW + tristate "Raw CAN Protocol (raw access with CAN-ID filtering)" + default y + help + The raw CAN protocol option offers access to the CAN bus via + the BSD socket API. You probably want to use the raw socket in + most cases where no higher level protocol is being used. The raw + socket has several filter options e.g. ID masking / error frames. + To receive/send raw CAN messages, use AF_CAN with protocol CAN_RAW. + +config CAN_BCM + tristate "Broadcast Manager CAN Protocol (with content filtering)" + default y + help + The Broadcast Manager offers content filtering, timeout monitoring, + sending of RTR frames, and cyclic CAN messages without permanent user + interaction. The BCM can be 'programmed' via the BSD socket API and + informs you on demand e.g. only on content updates / timeouts. + You probably want to use the bcm socket in most cases where cyclic + CAN messages are used on the bus (e.g. in automotive environments). + To use the Broadcast Manager, use AF_CAN with protocol CAN_BCM. + +config CAN_GW + tristate "CAN Gateway/Router (with netlink configuration)" + default y + help + The CAN Gateway/Router is used to route (and modify) CAN frames. + It is based on the PF_CAN core infrastructure for msg filtering and + msg sending and can optionally modify routed CAN frames on the fly. + CAN frames can be routed between CAN network interfaces (one hop). + They can be modified with AND/OR/XOR/SET operations as configured + by the netlink configuration interface known e.g. from iptables. + +source "net/can/j1939/Kconfig" + +config CAN_ISOTP + tristate "ISO 15765-2 CAN transport protocol" + help + CAN Transport Protocols offer support for segmented Point-to-Point + communication between CAN nodes via two defined CAN Identifiers. + This protocol driver implements segmented data transfers for CAN CC + (aka Classical CAN, CAN 2.0B) and CAN FD frame types which were + introduced with ISO 15765-2:2016. + As CAN frames can only transport a small amount of data bytes + (max. 8 bytes for CAN CC and max. 64 bytes for CAN FD) this + segmentation is needed to transport longer Protocol Data Units (PDU) + as needed e.g. for vehicle diagnosis (UDS, ISO 14229) or IP-over-CAN + traffic. + +endif -- cgit v1.3.1