From 684b413b5483f57c890c171b9400076a0143b918 Mon Sep 17 00:00:00 2001 From: Niklas Cassel Date: Fri, 18 Sep 2026 16:06:42 +0200 Subject: virtio_blk: set the zone write granularity virtblk_read_zoned_limits() reads the write granularity that the device reports in virtio_blk_zoned_characteristics and assigns it to the physical block size and to io_min, but never to the limit that is named after it. queue_limits.zone_write_granularity is left at zero, so blk_validate_zoned_limits() raises it to the logical block size: if (lim->zone_write_granularity < lim->logical_block_size) lim->zone_write_granularity = lim->logical_block_size; A device that reports a granularity coarser than its logical block size, which is what the field exists to express, therefore has it silently reduced. A 512e host managed disk passed through to a guest reports a logical block size of 512 and a write granularity of 4096, and the guest ends up with a zone write granularity of 512. bio_split_alignment() returns lim->zone_write_granularity if it is non-zero and bio_split_io_at() may split a bio with as per bio_split_alignment(). This can real to the write getting rejected by the host drive, as the write is not aligned to the physical block size. zonefs also takes its block size from bdev_zone_write_granularity(), so it would incorrectly use 512 on a disk that requires 4096. sd_zbc_read_zones() sets the limit from the physical block size for the same reason. NVMe ZNS and null_blk leave it unset, but the fallback gives the right answer for them, as their write granularity is the logical block size. virtio carries a separate value that may exceed it. Set the zone write granularity from the value that the device reports. Fixes: 95bfec41bd3d ("virtio-blk: add support for zoned block devices") Signed-off-by: Niklas Cassel Reviewed-by: Stefan Hajnoczi Link: https://patch.msgid.link/20260918140641.2031075-2-cassel@kernel.org Signed-off-by: Jens Axboe --- lib/ucs2_string.c | 169 ++++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 169 insertions(+) create mode 100644 lib/ucs2_string.c (limited to 'lib/ucs2_string.c') diff --git a/lib/ucs2_string.c b/lib/ucs2_string.c new file mode 100644 index 000000000..1f7dd4eb6 --- /dev/null +++ b/lib/ucs2_string.c @@ -0,0 +1,169 @@ +// SPDX-License-Identifier: GPL-2.0 +#include +#include + +/* Return the number of unicode characters in data */ +unsigned long +ucs2_strnlen(const ucs2_char_t *s, size_t maxlength) +{ + unsigned long length = 0; + + while (length < maxlength && *s++ != 0) + length++; + return length; +} +EXPORT_SYMBOL(ucs2_strnlen); + +unsigned long +ucs2_strlen(const ucs2_char_t *s) +{ + return ucs2_strnlen(s, ~0UL); +} +EXPORT_SYMBOL(ucs2_strlen); + +/* + * Return the number of bytes is the length of this string + * Note: this is NOT the same as the number of unicode characters + */ +unsigned long +ucs2_strsize(const ucs2_char_t *data, unsigned long maxlength) +{ + return ucs2_strnlen(data, maxlength/sizeof(ucs2_char_t)) * sizeof(ucs2_char_t); +} +EXPORT_SYMBOL(ucs2_strsize); + +/** + * ucs2_strscpy() - Copy a UCS2 string into a sized buffer. + * + * @dst: Pointer to the destination buffer where to copy the string to. + * @src: Pointer to the source buffer where to copy the string from. + * @count: Size of the destination buffer, in UCS2 (16-bit) characters. + * + * Like strscpy(), only for UCS2 strings. + * + * Copy the source string @src, or as much of it as fits, into the destination + * buffer @dst. The behavior is undefined if the string buffers overlap. The + * destination buffer @dst is always NUL-terminated, unless it's zero-sized. + * + * Return: The number of characters copied into @dst (excluding the trailing + * %NUL terminator) or -E2BIG if @count is 0 or @src was truncated due to the + * destination buffer being too small. + */ +ssize_t ucs2_strscpy(ucs2_char_t *dst, const ucs2_char_t *src, size_t count) +{ + long res; + + /* + * Ensure that we have a valid amount of space. We need to store at + * least one NUL-character. + */ + if (count == 0 || WARN_ON_ONCE(count > INT_MAX / sizeof(*dst))) + return -E2BIG; + + /* + * Copy at most 'count' characters, return early if we find a + * NUL-terminator. + */ + for (res = 0; res < count; res++) { + ucs2_char_t c; + + c = src[res]; + dst[res] = c; + + if (!c) + return res; + } + + /* + * The loop above terminated without finding a NUL-terminator, + * exceeding the 'count': Enforce proper NUL-termination and return + * error. + */ + dst[count - 1] = 0; + return -E2BIG; +} +EXPORT_SYMBOL(ucs2_strscpy); + +int +ucs2_strncmp(const ucs2_char_t *a, const ucs2_char_t *b, size_t len) +{ + while (1) { + if (len == 0) + return 0; + if (*a < *b) + return -1; + if (*a > *b) + return 1; + if (*a == 0) /* implies *b == 0 */ + return 0; + a++; + b++; + len--; + } +} +EXPORT_SYMBOL(ucs2_strncmp); + +unsigned long +ucs2_utf8size(const ucs2_char_t *src) +{ + unsigned long i; + unsigned long j = 0; + + for (i = 0; src[i]; i++) { + u16 c = src[i]; + + if (c >= 0x800) + j += 3; + else if (c >= 0x80) + j += 2; + else + j += 1; + } + + return j; +} +EXPORT_SYMBOL(ucs2_utf8size); + +/* + * copy at most maxlength bytes of whole utf8 characters to dest from the + * ucs2 string src. + * + * The return value is the number of characters copied, not including the + * final NUL character. + */ +unsigned long +ucs2_as_utf8(u8 *dest, const ucs2_char_t *src, unsigned long maxlength) +{ + unsigned int i; + unsigned long j = 0; + unsigned long limit = ucs2_strnlen(src, maxlength); + + for (i = 0; maxlength && i < limit; i++) { + u16 c = src[i]; + + if (c >= 0x800) { + if (maxlength < 3) + break; + maxlength -= 3; + dest[j++] = 0xe0 | (c & 0xf000) >> 12; + dest[j++] = 0x80 | (c & 0x0fc0) >> 6; + dest[j++] = 0x80 | (c & 0x003f); + } else if (c >= 0x80) { + if (maxlength < 2) + break; + maxlength -= 2; + dest[j++] = 0xc0 | (c & 0x7c0) >> 6; + dest[j++] = 0x80 | (c & 0x03f); + } else { + maxlength -= 1; + dest[j++] = c & 0x7f; + } + } + if (maxlength) + dest[j] = '\0'; + return j; +} +EXPORT_SYMBOL(ucs2_as_utf8); + +MODULE_DESCRIPTION("UCS2 string handling"); +MODULE_LICENSE("GPL v2"); -- cgit v1.3.1