From cf9610f9116d55c5a66ef9f1faecacabd93a9322 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Mon, 24 Aug 2026 08:46:03 -0700 Subject: Merge tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control updates from Linus Walleij: "Core changes: - Use the non-blocking mux_state_try_select() in the generic MUX pin control back-end - Free pin maps on pinctrl_generic_to_map() failure in the core helpers New hardware pin control: - Qualcomm Maili TLMM SoC, PMG1110 PMIC, and Eliza LPASS LPI TLMM SoC (this is for the low power audio, LPASS = Low Power Audio SubSystem portions) - Upboard support on top of the Intel pin controller - Apple T6030 and T6031 support (just compatible strings) - Samsung Exynos 8855 SoC - Mediatek MT6858 SoC - Rockchip RK3308B and RV1106 SoCs - Airoha EN7523 and AN7563 SoCs Improvements: - Qualcomm TLMM GPIOs are unconditionally marked as wakeup capable - Qualcomm improvements on top of the Qualcomm PDC (power domain controller) irqchip improvements from tglx:s tree - Qualcomm IPQ806x and IPQ9650 non-urgent pin grop fixups - The NPCM8xx driver has been put into shape fixing many pin and group definitions - Some non-urgent Tegra 264 pin assignments are fixed up - Some non-urgent fixups to Airoha AN7581 and AN7583 registers and pin assignments, missing features etc" * tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (130 commits) dt-bindings: pinctrl: Convert TI DA850 pupd to DT schema pinctrl: meson: sync some modify from A4 pinctrl: meson: a4: Add input enable pin configuration pinctrl: realtek: rtd1625: remove unused group name spdif_sel pinctrl: realtek: rtd1625: fix base_bit for VE4 GPIO 13 dt-bindings: pinctrl: microchip,pic32mzda-pinctrl: Convert to DT schema Revert "Merge branch 'ib-rsk7204' into devel" pinctrl: rockchip: Add RV1106 pinctrl support dt-bindings: pinctrl: rockchip: Add RV1106 compatible pinctrl: rockchip: Decode drive strength in the get function pinctrl: fix PINCTRL_GENERIC_MUX not always being selectable pinctrl: airoha: add support of an7563 SoC dt-bindings: pinctrl: airoha: add support of an7563 pin controller pinctrl: airoha: try to find chip scu node by phandle first pinctrl: airoha: add support of en7523 SoC dt-bindings: pinctrl: airoha: add support of en7523 pin controller pinctrl: airoha: an7583: add support for olt pinmux pinctrl: airoha: an7583: add support for pon_alt pinmux pinctrl: airoha: an7583: add support for npu_uart pinmux dt-bindings: pinctrl: airoha: an7583: add missed features ... --- lib/raid/raid6/recov.c | 95 ++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 95 insertions(+) create mode 100644 lib/raid/raid6/recov.c (limited to 'lib/raid/raid6/recov.c') diff --git a/lib/raid/raid6/recov.c b/lib/raid/raid6/recov.c new file mode 100644 index 000000000..3fa53bc3f --- /dev/null +++ b/lib/raid/raid6/recov.c @@ -0,0 +1,95 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Copyright 2002 H. Peter Anvin - All Rights Reserved + * + * RAID-6 data recovery in dual failure mode. In single failure mode, use the + * RAID-5 algorithm (or, in the case of Q failure, just reconstruct the + * syndrome.) + */ + +#include +#include +#include "algos.h" + +/* Recover two failed data blocks. */ +static void raid6_2data_recov_intx1(int disks, size_t bytes, int faila, + int failb, void **ptrs) +{ + u8 *p, *q, *dp, *dq; + u8 px, qx, db; + const u8 *pbmul; /* P multiplier table for B data */ + const u8 *qmul; /* Q multiplier table (for both) */ + + p = (u8 *)ptrs[disks-2]; + q = (u8 *)ptrs[disks-1]; + + /* Compute syndrome with zero for the missing data pages + Use the dead data pages as temporary storage for + delta p and delta q */ + dp = (u8 *)ptrs[faila]; + ptrs[faila] = page_address(ZERO_PAGE(0)); + ptrs[disks-2] = dp; + dq = (u8 *)ptrs[failb]; + ptrs[failb] = page_address(ZERO_PAGE(0)); + ptrs[disks-1] = dq; + + raid6_gen_syndrome(disks, bytes, ptrs); + + /* Restore pointer table */ + ptrs[faila] = dp; + ptrs[failb] = dq; + ptrs[disks-2] = p; + ptrs[disks-1] = q; + + /* Now, pick the proper data tables */ + pbmul = raid6_gfmul[raid6_gfexi[failb-faila]]; + qmul = raid6_gfmul[raid6_gfinv[raid6_gfexp[faila]^raid6_gfexp[failb]]]; + + /* Now do it... */ + while ( bytes-- ) { + px = *p ^ *dp; + qx = qmul[*q ^ *dq]; + *dq++ = db = pbmul[px] ^ qx; /* Reconstructed B */ + *dp++ = db ^ px; /* Reconstructed A */ + p++; q++; + } +} + +/* Recover failure of one data block plus the P block */ +static void raid6_datap_recov_intx1(int disks, size_t bytes, int faila, + void **ptrs) +{ + u8 *p, *q, *dq; + const u8 *qmul; /* Q multiplier table */ + + p = (u8 *)ptrs[disks-2]; + q = (u8 *)ptrs[disks-1]; + + /* Compute syndrome with zero for the missing data page + Use the dead data page as temporary storage for delta q */ + dq = (u8 *)ptrs[faila]; + ptrs[faila] = page_address(ZERO_PAGE(0)); + ptrs[disks-1] = dq; + + raid6_gen_syndrome(disks, bytes, ptrs); + + /* Restore pointer table */ + ptrs[faila] = dq; + ptrs[disks-1] = q; + + /* Now, pick the proper data tables */ + qmul = raid6_gfmul[raid6_gfinv[raid6_gfexp[faila]]]; + + /* Now do it... */ + while ( bytes-- ) { + *p++ ^= *dq = qmul[*q ^ *dq]; + q++; dq++; + } +} + + +const struct raid6_recov_calls raid6_recov_intx1 = { + .data2 = raid6_2data_recov_intx1, + .datap = raid6_datap_recov_intx1, + .name = "intx1", +}; -- cgit v1.3.1