From 22098763a10d9c1340827fcf6edab66f153b27f0 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sun, 13 Sep 2026 12:27:00 -0700 Subject: Merge tag 'trace-v7.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace Pull tracing fixes from Steven Rostedt: - Don't destroy user event fields when removal fails User event fields are destroyed before the event is removed from visibility. But that can fail leaving the still visible event with no fields. Move the destroying of the fields to after the event is successfully removed from visibility. - Initialize function graph state is fork before calling copy_exec_state() For non-CLONE_VM forks, copy_exec_state() allocates a new task_exec_state. If that allocation fails, ftrace_graph_exit_task() will free the tasks ret_stack pointer. Since that pointer is still using the parent's ret_stack, it mistakenly frees the parent's pointer too. Call ftrace_graph_init() on the task first which will NULL out the new tasks's ret_stack and if the copy fails, it will not free anything. - Remove FGRAPH_MAX_INDEX The macro FGRAPH_MAX_INDEX was added but never used. Remove it. - Save ent_size in function graph printing of nested functions The function graph tracer needs to look at the next event to see if the next event is the return of the current function entry. If it is, it prints a single line: ktime_get(); Otherwise it prints it like a nested function: tick_nohz_irq_exit() { ktime_get(); kcpustat_irq_exit(); } In order to look at the next event, it must save the current event so that it has the information to print from it. It saves the event in the iterator descriptor called "ent". What it doesn't save is the ent_size of the event which is now used to know if the function graph arguments are to be printed. The peek doesn't save the size so the size used happens to be that of the size of the last event that was seen. Save the entry event size in the iterator descriptor so that the correct size is used. - Fix several errors with freeing data in the histogram code The histogram code had a lot of leaked or or incorrect accounting when failures happen. Correct them. - Fix histogram regression of .percent and .graph modifiers Up until 6.3 histogram values could have "percent" or "graph" modifiers that changed how they were printed. But a change that added restricting histograms values from being strings, stack traces and other modifiers inadvertently prevented them from using the percent and graph modifiers, which were legal use cases for values. Put back the percent and graph modifiers. - Fix various typos in the comments - Set the trace_clock before initializing a histogram with clock argument The histogram API allows the user to specific which trace clock to use via a "clock=" string. The histogram is set up first before the clock is checked. If the passed in clock is not valid, it exits without fully fixing up the histogram leaving it on the list and a use-after-free can trigger. Update the clock argument first and if it fails then exit gracefully before the histogram trigger is placed on any lists. - Restore :mod: trailer after parsing in ftrace_set_clr_event The function ftrace_set_clr_event() modifies the parse string and needs to put it back to what was passed in. It searches for ":mod:" via a strsep() but fails to put back the first ':' in the string. Add back the ':' in the passed in string. - Take trace_array reference when opening a tracer options file The options files are dynamically created and some tracers add their own options. When a tracer adds their own list of options, the trace_array holding them has an array to hold the list of options for each tracer. This array increases in size via a krealloc(), and the new entry gets a newly allocated array to hold the options of the new tracer being added. The element in each entry of the tracer's option array holds a pointer back to the trace_array, a pointer to the tracer it is associated to, a pointer to the flags of the option. The issue is that these arrays are freed when the trace_array is freed when its instance it represents is removed from the instances directory. There's a race that an open of one of these options files can happen when the instance is being removed. Add a new helper function to be called by the open function of the options file to iterate all existing trace_arrays under a lock and find the one that has the given option element in one of it's tracer arrays. If found, then update the associated trace_array's reference counter to keep it from being freed. If not found, have the open call return -ENODEV. - Disable interrupts when acquiring the lock in rb_wake_up_waiters() The function rb_wake_up_waiters() assumes it will be called in interrupt context and does not disable irqs when taking cpu_buffer->reader_lock, which can be called in hard interrupt context. The issue is in PREEMPT_RT, this function is called in thread context leaving this lock open to a deadlock. Take the lock with interrupts disabled. - Use rcu_assign_pointer() for tmp_ops filter hash The tmp_ops used in update_ftrace_direct_mod() assigns its filter_hash field directly, but that field is annotated as __rcu and sparse complains. Assign it with rcu_assign_pointer() - Fix use-after-free in enable_trigger_private_data_free() The trace_event_call is accessed through the event_trigger_data's trace_event_file pointer to put the trace_event_call on freeing. The issue is that the trace_event_file data may have been freed already causing a use-after-free. Add a field to the event_trigger_data that points directly to the trace_event_call so that it can decrement its reference directly without needing to go through the trace_event_file. - Fix accounting of buffer data remote headers trace_buffer_desc_size() and trace_remote_alloc_buffer() undercount the number of pages is needed for the asked for size as it doesn't take into account the meta data on each page. Add a helper function to do the calculation properly and use that in these functions. - Catch nr_page_va overflow in ring_buffer_desc sizing The number of pages per remote ring buffer is capped by ring_buffer_desc::nr_page_va (32 bits). A buffer_size large enough to overflow that field would silently allocate a descriptor smaller than what was asked for. - Do not resize the subbuf order if any per_cpu buffer is disabled The mmapping of ring buffers disables resizing the subbuffers, but it is done per-cpu whereas the subbuf size change is done for all the per_cpu buffers under the buffer->mutex. It could change the size of some while the mapping is happening on others. Have the resize of the subbuf order check all the per_cpu buffers under the lock to see if any of them is disabled before starting and causing an inconsistency between buffers that are being mapped. * tag 'trace-v7.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: (25 commits) ring-buffer: Check resize_disabled before publishing the new subbuf order tracing/remotes: Catch nr_page_va overflow in ring_buffer_desc sizing tracing/remotes: Account for ring buffer page header in size calculation tracing: Don't dereference trace_event_file in deferred trigger free ftrace: Use rcu_assign_pointer() for tmp_ops filter hash ring-buffer: Acquire the lock with irqsave in rb_wake_up_waiters() tracing: Take trace_array reference when opening a tracer options file tracing: Fix ring_buffer_read_page_size() kernel-doc tracing: Restore :mod: trailer after parsing in ftrace_set_clr_event() tracing: Fix memory corruption from a "STACKTRACE" histogram key tracing: Fix memory corruption from the histogram stacktrace modifier tracing: Undo the registration when enabling the histogram trigger fails tracing: Take the reference before publishing the named histogram trigger tracing: Set the trace clock before registering the histogram trigger tracing: Fix typo "preceeded" in comment tracing: Fix typo "availabe" in comment tracing: Let histogram values keep the percent and graph modifiers tracing: Keep the entry count when the histogram stats allocation fails tracing: Free histogram the field rejected for a bad modifier tracing: Free histogram the var ref when its initialization fails ... --- lib/errseq.c | 208 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 208 insertions(+) create mode 100644 lib/errseq.c (limited to 'lib/errseq.c') diff --git a/lib/errseq.c b/lib/errseq.c new file mode 100644 index 000000000..13a2581c5 --- /dev/null +++ b/lib/errseq.c @@ -0,0 +1,208 @@ +// SPDX-License-Identifier: GPL-2.0 +#include +#include +#include +#include +#include + +/* + * An errseq_t is a way of recording errors in one place, and allowing any + * number of "subscribers" to tell whether it has changed since a previous + * point where it was sampled. + * + * It's implemented as an unsigned 32-bit value. The low order bits are + * designated to hold an error code (between 0 and -MAX_ERRNO). The upper bits + * are used as a counter. This is done with atomics instead of locking so that + * these functions can be called from any context. + * + * The general idea is for consumers to sample an errseq_t value. That value + * can later be used to tell whether any new errors have occurred since that + * sampling was done. + * + * Note that there is a risk of collisions if new errors are being recorded + * frequently, since we have so few bits to use as a counter. + * + * To mitigate this, one bit is used as a flag to tell whether the value has + * been sampled since a new value was recorded. That allows us to avoid bumping + * the counter if no one has sampled it since the last time an error was + * recorded. + * + * A new errseq_t should always be zeroed out. A errseq_t value of all zeroes + * is the special (but common) case where there has never been an error. An all + * zero value thus serves as the "epoch" if one wishes to know whether there + * has ever been an error set since it was first initialized. + */ + +/* The low bits are designated for error code (max of MAX_ERRNO) */ +#define ERRSEQ_SHIFT (ilog2(MAX_ERRNO) + 1) + +/* This bit is used as a flag to indicate whether the value has been seen */ +#define ERRSEQ_SEEN (1 << ERRSEQ_SHIFT) + +/* Leverage macro ERRSEQ_SEEN to define errno mask macro here */ +#define ERRNO_MASK (ERRSEQ_SEEN - 1) + +/* The lowest bit of the counter */ +#define ERRSEQ_CTR_INC (1 << (ERRSEQ_SHIFT + 1)) + +/** + * errseq_set - set a errseq_t for later reporting + * @eseq: errseq_t field that should be set + * @err: error to set (must be between -1 and -MAX_ERRNO) + * + * This function sets the error in @eseq, and increments the sequence counter + * if the last sequence was sampled at some point in the past. + * + * Any error set will always overwrite an existing error. + * + * Return: The previous value, primarily for debugging purposes. The + * return value should not be used as a previously sampled value in later + * calls as it will not have the SEEN flag set. + */ +errseq_t errseq_set(errseq_t *eseq, int err) +{ + errseq_t cur, old; + + + /* + * Ensure the error code actually fits where we want it to go. If it + * doesn't then just throw a warning and don't record anything. We + * also don't accept zero here as that would effectively clear a + * previous error. + */ + old = READ_ONCE(*eseq); + + if (WARN(unlikely(err == 0 || (unsigned int)-err > MAX_ERRNO), + "err = %d\n", err)) + return old; + + for (;;) { + errseq_t new; + + /* Clear out error bits and set new error */ + new = (old & ~(ERRNO_MASK | ERRSEQ_SEEN)) | -err; + + /* Only increment if someone has looked at it */ + if (old & ERRSEQ_SEEN) + new += ERRSEQ_CTR_INC; + + /* If there would be no change, then call it done */ + if (new == old) { + cur = new; + break; + } + + /* Try to swap the new value into place */ + cur = cmpxchg(eseq, old, new); + + /* + * Call it success if we did the swap or someone else beat us + * to it for the same value. + */ + if (likely(cur == old || cur == new)) + break; + + /* Raced with an update, try again */ + old = cur; + } + return cur; +} +EXPORT_SYMBOL(errseq_set); + +/** + * errseq_sample() - Grab current errseq_t value. + * @eseq: Pointer to errseq_t to be sampled. + * + * This function allows callers to initialise their errseq_t variable. + * If the error has been "seen", new callers will not see an old error. + * If there is an unseen error in @eseq, the caller of this function will + * see it the next time it checks for an error. + * + * Context: Any context. + * Return: The current errseq value. + */ +errseq_t errseq_sample(errseq_t *eseq) +{ + errseq_t old = READ_ONCE(*eseq); + + /* If nobody has seen this error yet, then we can be the first. */ + if (!(old & ERRSEQ_SEEN)) + old = 0; + return old; +} +EXPORT_SYMBOL(errseq_sample); + +/** + * errseq_check() - Has an error occurred since a particular sample point? + * @eseq: Pointer to errseq_t value to be checked. + * @since: Previously-sampled errseq_t from which to check. + * + * Grab the value that eseq points to, and see if it has changed @since + * the given value was sampled. The @since value is not advanced, so there + * is no need to mark the value as seen. + * + * Return: The latest error set in the errseq_t or 0 if it hasn't changed. + */ +int errseq_check(errseq_t *eseq, errseq_t since) +{ + errseq_t cur = READ_ONCE(*eseq); + + if (likely(cur == since)) + return 0; + return -(cur & ERRNO_MASK); +} +EXPORT_SYMBOL(errseq_check); + +/** + * errseq_check_and_advance() - Check an errseq_t and advance to current value. + * @eseq: Pointer to value being checked and reported. + * @since: Pointer to previously-sampled errseq_t to check against and advance. + * + * Grab the eseq value, and see whether it matches the value that @since + * points to. If it does, then just return 0. + * + * If it doesn't, then the value has changed. Set the "seen" flag, and try to + * swap it into place as the new eseq value. Then, set that value as the new + * "since" value, and return whatever the error portion is set to. + * + * Note that no locking is provided here for concurrent updates to the "since" + * value. The caller must provide that if necessary. Because of this, callers + * may want to do a lockless errseq_check before taking the lock and calling + * this. + * + * Return: Negative errno if one has been stored, or 0 if no new error has + * occurred. + */ +int errseq_check_and_advance(errseq_t *eseq, errseq_t *since) +{ + int err = 0; + errseq_t old, new; + + /* + * Most callers will want to use the inline wrapper to check this, + * so that the common case of no error is handled without needing + * to take the lock that protects the "since" value. + */ + old = READ_ONCE(*eseq); + if (old != *since) { + /* + * Set the flag and try to swap it into place if it has + * changed. + * + * We don't care about the outcome of the swap here. If the + * swap doesn't occur, then it has either been updated by a + * writer who is altering the value in some way (updating + * counter or resetting the error), or another reader who is + * just setting the "seen" flag. Either outcome is OK, and we + * can advance "since" and return an error based on what we + * have. + */ + new = old | ERRSEQ_SEEN; + if (new != old) + cmpxchg(eseq, old, new); + *since = new; + err = -(new & ERRNO_MASK); + } + return err; +} +EXPORT_SYMBOL(errseq_check_and_advance); -- cgit v1.3.1