From 4617721c502b2ddaa4e324e86da4997edf738fa5 Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Wed, 2 Sep 2026 09:55:01 -0400 Subject: ftrace: Synchronize the initialization of ftrace_ops There's some internal state that ftrace_ops needs to have set, but since it can be declared outside of the ftrace.c code, it calls ftrace_ops_init() on the ops in every global function. The issue is that if two tasks call it on the same ops at the same time it is possible to have the initialization of one corrupt the initialization of the other call. Create a ops_mutex to use to synchronize every initialization of the ftrace_ops. The mutex is taken within checking the ftrace_ops flag that states it was initializied but the flag is checked again after the mutex has been taken. Checking first outside the mutex allows it to shortcut having to take the mutex. But then the check needs to be done again after the mute is taken in case of races. Cc: stable@vger.kernel.org Link: https://patch.msgid.link/20260902095501.6b59af20@gandalf.local.home Fixes: f04f24fb7e48d ("ftrace, kprobes: Fix a deadlock on ftrace_regex_lock") Reported-by: sashiko-bot@kernel.org Close: https://lore.kernel.org/all/20260829025528.49A831F000E9@smtp.kernel.org/ Signed-off-by: Steven Rostedt --- lib/crypto/sha3.c | 411 ++++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 411 insertions(+) create mode 100644 lib/crypto/sha3.c (limited to 'lib/crypto/sha3.c') diff --git a/lib/crypto/sha3.c b/lib/crypto/sha3.c new file mode 100644 index 000000000..286a2373c --- /dev/null +++ b/lib/crypto/sha3.c @@ -0,0 +1,411 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * SHA-3, as specified in + * https://nvlpubs.nist.gov/nistpubs/FIPS/NIST.FIPS.202.pdf + * + * SHA-3 code by Jeff Garzik + * Ard Biesheuvel + * David Howells + * + * See also Documentation/crypto/sha3.rst + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt +#include +#include +#include +#include +#include +#include +#include "fips-sha.h" + +/* + * On some 32-bit architectures, such as h8300, GCC ends up using over 1 KB of + * stack if the round calculation gets inlined into the loop in + * sha3_keccakf_generic(). On the other hand, on 64-bit architectures with + * plenty of [64-bit wide] general purpose registers, not inlining it severely + * hurts performance. So let's use 64-bitness as a heuristic to decide whether + * to inline or not. + */ +#ifdef CONFIG_64BIT +#define SHA3_INLINE inline +#else +#define SHA3_INLINE noinline +#endif + +#define SHA3_KECCAK_ROUNDS 24 + +static const u64 sha3_keccakf_rndc[SHA3_KECCAK_ROUNDS] = { + 0x0000000000000001ULL, 0x0000000000008082ULL, 0x800000000000808aULL, + 0x8000000080008000ULL, 0x000000000000808bULL, 0x0000000080000001ULL, + 0x8000000080008081ULL, 0x8000000000008009ULL, 0x000000000000008aULL, + 0x0000000000000088ULL, 0x0000000080008009ULL, 0x000000008000000aULL, + 0x000000008000808bULL, 0x800000000000008bULL, 0x8000000000008089ULL, + 0x8000000000008003ULL, 0x8000000000008002ULL, 0x8000000000000080ULL, + 0x000000000000800aULL, 0x800000008000000aULL, 0x8000000080008081ULL, + 0x8000000000008080ULL, 0x0000000080000001ULL, 0x8000000080008008ULL +}; + +/* + * Perform a single round of Keccak mixing. + */ +static SHA3_INLINE void sha3_keccakf_one_round_generic(u64 st[25], int round) +{ + u64 t[5], tt, bc[5]; + + /* Theta */ + bc[0] = st[0] ^ st[5] ^ st[10] ^ st[15] ^ st[20]; + bc[1] = st[1] ^ st[6] ^ st[11] ^ st[16] ^ st[21]; + bc[2] = st[2] ^ st[7] ^ st[12] ^ st[17] ^ st[22]; + bc[3] = st[3] ^ st[8] ^ st[13] ^ st[18] ^ st[23]; + bc[4] = st[4] ^ st[9] ^ st[14] ^ st[19] ^ st[24]; + + t[0] = bc[4] ^ rol64(bc[1], 1); + t[1] = bc[0] ^ rol64(bc[2], 1); + t[2] = bc[1] ^ rol64(bc[3], 1); + t[3] = bc[2] ^ rol64(bc[4], 1); + t[4] = bc[3] ^ rol64(bc[0], 1); + + st[0] ^= t[0]; + + /* Rho Pi */ + tt = st[1]; + st[ 1] = rol64(st[ 6] ^ t[1], 44); + st[ 6] = rol64(st[ 9] ^ t[4], 20); + st[ 9] = rol64(st[22] ^ t[2], 61); + st[22] = rol64(st[14] ^ t[4], 39); + st[14] = rol64(st[20] ^ t[0], 18); + st[20] = rol64(st[ 2] ^ t[2], 62); + st[ 2] = rol64(st[12] ^ t[2], 43); + st[12] = rol64(st[13] ^ t[3], 25); + st[13] = rol64(st[19] ^ t[4], 8); + st[19] = rol64(st[23] ^ t[3], 56); + st[23] = rol64(st[15] ^ t[0], 41); + st[15] = rol64(st[ 4] ^ t[4], 27); + st[ 4] = rol64(st[24] ^ t[4], 14); + st[24] = rol64(st[21] ^ t[1], 2); + st[21] = rol64(st[ 8] ^ t[3], 55); + st[ 8] = rol64(st[16] ^ t[1], 45); + st[16] = rol64(st[ 5] ^ t[0], 36); + st[ 5] = rol64(st[ 3] ^ t[3], 28); + st[ 3] = rol64(st[18] ^ t[3], 21); + st[18] = rol64(st[17] ^ t[2], 15); + st[17] = rol64(st[11] ^ t[1], 10); + st[11] = rol64(st[ 7] ^ t[2], 6); + st[ 7] = rol64(st[10] ^ t[0], 3); + st[10] = rol64( tt ^ t[1], 1); + + /* Chi */ + bc[ 0] = ~st[ 1] & st[ 2]; + bc[ 1] = ~st[ 2] & st[ 3]; + bc[ 2] = ~st[ 3] & st[ 4]; + bc[ 3] = ~st[ 4] & st[ 0]; + bc[ 4] = ~st[ 0] & st[ 1]; + st[ 0] ^= bc[ 0]; + st[ 1] ^= bc[ 1]; + st[ 2] ^= bc[ 2]; + st[ 3] ^= bc[ 3]; + st[ 4] ^= bc[ 4]; + + bc[ 0] = ~st[ 6] & st[ 7]; + bc[ 1] = ~st[ 7] & st[ 8]; + bc[ 2] = ~st[ 8] & st[ 9]; + bc[ 3] = ~st[ 9] & st[ 5]; + bc[ 4] = ~st[ 5] & st[ 6]; + st[ 5] ^= bc[ 0]; + st[ 6] ^= bc[ 1]; + st[ 7] ^= bc[ 2]; + st[ 8] ^= bc[ 3]; + st[ 9] ^= bc[ 4]; + + bc[ 0] = ~st[11] & st[12]; + bc[ 1] = ~st[12] & st[13]; + bc[ 2] = ~st[13] & st[14]; + bc[ 3] = ~st[14] & st[10]; + bc[ 4] = ~st[10] & st[11]; + st[10] ^= bc[ 0]; + st[11] ^= bc[ 1]; + st[12] ^= bc[ 2]; + st[13] ^= bc[ 3]; + st[14] ^= bc[ 4]; + + bc[ 0] = ~st[16] & st[17]; + bc[ 1] = ~st[17] & st[18]; + bc[ 2] = ~st[18] & st[19]; + bc[ 3] = ~st[19] & st[15]; + bc[ 4] = ~st[15] & st[16]; + st[15] ^= bc[ 0]; + st[16] ^= bc[ 1]; + st[17] ^= bc[ 2]; + st[18] ^= bc[ 3]; + st[19] ^= bc[ 4]; + + bc[ 0] = ~st[21] & st[22]; + bc[ 1] = ~st[22] & st[23]; + bc[ 2] = ~st[23] & st[24]; + bc[ 3] = ~st[24] & st[20]; + bc[ 4] = ~st[20] & st[21]; + st[20] ^= bc[ 0]; + st[21] ^= bc[ 1]; + st[22] ^= bc[ 2]; + st[23] ^= bc[ 3]; + st[24] ^= bc[ 4]; + + /* Iota */ + st[0] ^= sha3_keccakf_rndc[round]; +} + +/* Generic implementation of the Keccak-f[1600] permutation */ +static void sha3_keccakf_generic(struct sha3_state *state) +{ + /* + * Temporarily convert the state words from little-endian to native- + * endian so that they can be operated on. Note that on little-endian + * machines this conversion is a no-op and is optimized out. + */ + + for (int i = 0; i < ARRAY_SIZE(state->words); i++) + state->native_words[i] = le64_to_cpu(state->words[i]); + + for (int round = 0; round < SHA3_KECCAK_ROUNDS; round++) + sha3_keccakf_one_round_generic(state->native_words, round); + + for (int i = 0; i < ARRAY_SIZE(state->words); i++) + state->words[i] = cpu_to_le64(state->native_words[i]); +} + +/* + * Generic implementation of absorbing the given nonzero number of full blocks + * into the sponge function Keccak[r=8*block_size, c=1600-8*block_size]. + */ +static void __maybe_unused +sha3_absorb_blocks_generic(struct sha3_state *state, const u8 *data, + size_t nblocks, size_t block_size) +{ + do { + for (size_t i = 0; i < block_size; i += 8) + state->words[i / 8] ^= get_unaligned((__le64 *)&data[i]); + sha3_keccakf_generic(state); + data += block_size; + } while (--nblocks); +} + +#ifdef CONFIG_CRYPTO_LIB_SHA3_ARCH +#include "sha3.h" /* $(SRCARCH)/sha3.h */ +#else +#define sha3_keccakf sha3_keccakf_generic +#define sha3_absorb_blocks sha3_absorb_blocks_generic +#endif + +void __sha3_update(struct __sha3_ctx *ctx, const u8 *in, size_t in_len) +{ + const size_t block_size = ctx->block_size; + size_t absorb_offset = ctx->absorb_offset; + + /* Warn if squeezing has already begun. */ + WARN_ON_ONCE(absorb_offset >= block_size); + + if (absorb_offset && absorb_offset + in_len >= block_size) { + crypto_xor(&ctx->state.bytes[absorb_offset], in, + block_size - absorb_offset); + in += block_size - absorb_offset; + in_len -= block_size - absorb_offset; + sha3_keccakf(&ctx->state); + absorb_offset = 0; + } + + if (in_len >= block_size) { + size_t nblocks = in_len / block_size; + + sha3_absorb_blocks(&ctx->state, in, nblocks, block_size); + in += nblocks * block_size; + in_len -= nblocks * block_size; + } + + if (in_len) { + crypto_xor(&ctx->state.bytes[absorb_offset], in, in_len); + absorb_offset += in_len; + } + ctx->absorb_offset = absorb_offset; +} +EXPORT_SYMBOL_GPL(__sha3_update); + +void sha3_final(struct sha3_ctx *sha3_ctx, u8 *out) +{ + struct __sha3_ctx *ctx = &sha3_ctx->ctx; + + ctx->state.bytes[ctx->absorb_offset] ^= 0x06; + ctx->state.bytes[ctx->block_size - 1] ^= 0x80; + sha3_keccakf(&ctx->state); + memcpy(out, ctx->state.bytes, ctx->digest_size); + sha3_zeroize_ctx(sha3_ctx); +} +EXPORT_SYMBOL_GPL(sha3_final); + +void shake_squeeze(struct shake_ctx *shake_ctx, u8 *out, size_t out_len) +{ + struct __sha3_ctx *ctx = &shake_ctx->ctx; + const size_t block_size = ctx->block_size; + size_t squeeze_offset = ctx->squeeze_offset; + + if (ctx->absorb_offset < block_size) { + /* First squeeze: */ + + /* Add the domain separation suffix and padding. */ + ctx->state.bytes[ctx->absorb_offset] ^= 0x1f; + ctx->state.bytes[block_size - 1] ^= 0x80; + + /* Indicate that squeezing has begun. */ + ctx->absorb_offset = block_size; + + /* + * Indicate that no output is pending yet, i.e. sha3_keccakf() + * will need to be called before the first copy. + */ + squeeze_offset = block_size; + } + while (out_len) { + if (squeeze_offset == block_size) { + sha3_keccakf(&ctx->state); + squeeze_offset = 0; + } + size_t copy = min(out_len, block_size - squeeze_offset); + + memcpy(out, &ctx->state.bytes[squeeze_offset], copy); + out += copy; + out_len -= copy; + squeeze_offset += copy; + } + ctx->squeeze_offset = squeeze_offset; +} +EXPORT_SYMBOL_GPL(shake_squeeze); + +#ifndef sha3_224_arch +static inline bool sha3_224_arch(const u8 *in, size_t in_len, + u8 out[SHA3_224_DIGEST_SIZE]) +{ + return false; +} +#endif +#ifndef sha3_256_arch +static inline bool sha3_256_arch(const u8 *in, size_t in_len, + u8 out[SHA3_256_DIGEST_SIZE]) +{ + return false; +} +#endif +#ifndef sha3_384_arch +static inline bool sha3_384_arch(const u8 *in, size_t in_len, + u8 out[SHA3_384_DIGEST_SIZE]) +{ + return false; +} +#endif +#ifndef sha3_512_arch +static inline bool sha3_512_arch(const u8 *in, size_t in_len, + u8 out[SHA3_512_DIGEST_SIZE]) +{ + return false; +} +#endif + +void sha3_224(const u8 *in, size_t in_len, u8 out[SHA3_224_DIGEST_SIZE]) +{ + struct sha3_ctx ctx; + + if (sha3_224_arch(in, in_len, out)) + return; + sha3_224_init(&ctx); + sha3_update(&ctx, in, in_len); + sha3_final(&ctx, out); +} +EXPORT_SYMBOL_GPL(sha3_224); + +void sha3_256(const u8 *in, size_t in_len, u8 out[SHA3_256_DIGEST_SIZE]) +{ + struct sha3_ctx ctx; + + if (sha3_256_arch(in, in_len, out)) + return; + sha3_256_init(&ctx); + sha3_update(&ctx, in, in_len); + sha3_final(&ctx, out); +} +EXPORT_SYMBOL_GPL(sha3_256); + +void sha3_384(const u8 *in, size_t in_len, u8 out[SHA3_384_DIGEST_SIZE]) +{ + struct sha3_ctx ctx; + + if (sha3_384_arch(in, in_len, out)) + return; + sha3_384_init(&ctx); + sha3_update(&ctx, in, in_len); + sha3_final(&ctx, out); +} +EXPORT_SYMBOL_GPL(sha3_384); + +void sha3_512(const u8 *in, size_t in_len, u8 out[SHA3_512_DIGEST_SIZE]) +{ + struct sha3_ctx ctx; + + if (sha3_512_arch(in, in_len, out)) + return; + sha3_512_init(&ctx); + sha3_update(&ctx, in, in_len); + sha3_final(&ctx, out); +} +EXPORT_SYMBOL_GPL(sha3_512); + +void shake128(const u8 *in, size_t in_len, u8 *out, size_t out_len) +{ + struct shake_ctx ctx; + + shake128_init(&ctx); + shake_update(&ctx, in, in_len); + shake_squeeze(&ctx, out, out_len); + shake_zeroize_ctx(&ctx); +} +EXPORT_SYMBOL_GPL(shake128); + +void shake256(const u8 *in, size_t in_len, u8 *out, size_t out_len) +{ + struct shake_ctx ctx; + + shake256_init(&ctx); + shake_update(&ctx, in, in_len); + shake_squeeze(&ctx, out, out_len); + shake_zeroize_ctx(&ctx); +} +EXPORT_SYMBOL_GPL(shake256); + +#if defined(sha3_mod_init_arch) || defined(CONFIG_CRYPTO_FIPS) +static int __init sha3_mod_init(void) +{ +#ifdef sha3_mod_init_arch + sha3_mod_init_arch(); +#endif + if (fips_enabled) { + /* + * FIPS cryptographic algorithm self-test. As per the FIPS + * Implementation Guidance, testing any SHA-3 algorithm + * satisfies the test requirement for all of them. + */ + u8 hash[SHA3_256_DIGEST_SIZE]; + + sha3_256(fips_test_data, sizeof(fips_test_data), hash); + if (memcmp(fips_test_sha3_256_value, hash, sizeof(hash)) != 0) + panic("sha3: FIPS self-test failed\n"); + } + return 0; +} +subsys_initcall(sha3_mod_init); + +static void __exit sha3_mod_exit(void) +{ +} +module_exit(sha3_mod_exit); +#endif + +MODULE_DESCRIPTION("SHA-3 library functions"); +MODULE_LICENSE("GPL"); -- cgit v1.3.1